swQinQRuleActivePort
Q-IN-Q-MIB ·
.1.3.6.1.4.1.171.12.57.4.2.1.21
Object
column
Q-BRIDGE-MIBPortList
Specifies the active port list which the rule takes effect.
Context
- MIB
- Q-IN-Q-MIB
- OID
.1.3.6.1.4.1.171.12.57.4.2.1.21- Type
- column
- Access
- readonly
- Status
- current
- Parent
- swQinQRuleEntry
- Table
- swQinQRuleTable
- Siblings
- 20
Syntax
Q-BRIDGE-MIBPortList
- Source
- Q-BRIDGE-MIBPortList
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swQinQRuleProfileID Specifies the profile ID. | column | Integer32 | .1.3.6.1.4.1.171.12.57.4.2.1.1 |
| swQinQRuleDstIPv4AddrMask Specifies the IPv4 destination address mask. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.12.57.4.2.1.10 |
| swQinQRuleInnerVid Specifies the packet's inner VID range. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.171.12.57.4.2.1.11 |
| swQinQRuleOuterVid Specifies the packet's outer VID range. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.171.12.57.4.2.1.12 |
| swQinQRule8021p Specifies the packet's 802.1p priority.
-1 means the 802.1p priority is not set | column | Integer32 | .1.3.6.1.4.1.171.12.57.4.2.1.13 |
| swQinQRuleIpProtocol Specifies the IP protocol. | column | Integer32 | .1.3.6.1.4.1.171.12.57.4.2.1.14 |
| swQinQRuleSourcePort Specifies the source port number. | column | Integer32 | .1.3.6.1.4.1.171.12.57.4.2.1.15 |
| swQinQRuleDestinationPort Specifies the destination port number. | column | Integer32 | .1.3.6.1.4.1.171.12.57.4.2.1.16 |
| swQinQRuleSpvidOperation The 'add' action indicates to add a tag for the assigned SP-VLAN
before the C-VLAN tag. If there is S-TAG in the packet, this rule
will not take effect.
The 'replac… | column | Enumeration | .1.3.6.1.4.1.171.12.57.4.2.1.17 |
| swQinQRuleSpvid Specifies the SP-VLAN ID to be assigned to the matched packet. | column | Integer32 | .1.3.6.1.4.1.171.12.57.4.2.1.18 |
| swQinQPriority Specifies the priority of the SP-VLAN.
-1 is default value. | column | Integer32 | .1.3.6.1.4.1.171.12.57.4.2.1.19 |
| swQinQRuleAccessID Specifies the ID of the Q-in-Q rule entry related to the swQinQRuleProfileID. | column | Integer32 | .1.3.6.1.4.1.171.12.57.4.2.1.2 |
| swQinQRuleRowStatus This object indicates the status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.12.57.4.2.1.20 |
| swQinQRuleClassifySrcMacAddr Specifies the source MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.12.57.4.2.1.3 |
| swQinQRuleClassifySrcMacAddrMask Specifies the source MAC address mask. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.12.57.4.2.1.4 |
| swQinQRuleClassifyDstMacAddr Specifies the destination MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.12.57.4.2.1.5 |
| swQinQRuleClassifyDstMacAddrMask Specifies the destination MAC address mask. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.12.57.4.2.1.6 |
| swQinQRuleSrcIPv4Address Specifies an IPv4 source address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.12.57.4.2.1.7 |
| swQinQRuleSrcIPv4AddrMask Specifies the IPv4 source address mask. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.12.57.4.2.1.8 |
| swQinQRuleDstIPv4Address Specifies an IPv4 destination address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.171.12.57.4.2.1.9 |