PW-ENET-STD-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

pwEnetTable

table

.1.3.6.1.2.1.180.1.1 · 1 row entry · 8 columns

Open in standard view

Uses the rfc variant from /opt/observium/mibs/rfc.

Command help

Walk pwEnetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-ENET-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-ENET-STD-MIB::pwEnetTable'

This table contains the index to the Ethernet tables
associated with this Ethernet PW, the VLAN configuration,
and the VLAN mode.

pwEnetEntry row .1.3.6.1.2.1.180.1.1.1

This table is indexed by the same index that was created
for the associated entry in the PW generic table in the

PW-STD-MIB module.
The pwIndex and the pwEnetPwInstance are used as indexes
to allow multiple…

Indexes

PW-STD-MIBpwIndex pwEnetPwInstance

Column Syntax OID

pwEnetPwInstance

If multiple rows are mapped to the same PW, this index is
used to uniquely identify the individual row.
If the value of the VLAN field is known at the time of
row creation, the value of pwEnetPwVlan MAY be used
for bett…

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.2.1.180.1.1.1.1

pwEnetPwVlan

This object defines the (service-delimiting) VLAN field
value on the PW. The value 4095 MUST be used if the
object is not applicable, for example, when mapping all
packets from an Ethernet port to this PW (raw mode).
T…

Q-BRIDGE-MIBVlanIdOrAnyOrNoner/w

Type Constraints:
range: 0..4095

.1.3.6.1.2.1.180.1.1.1.2

pwEnetVlanMode

This object indicates the mode of VLAN handling between the
port or the virtual port associated with the PW and the
PW encapsulation.

- 'other' indicates an operation that is not defined by
this MIB modu…

Enumerationr/w

Enumerated Values:

0	other
1	portBased
2	noChange
3	changeVlan
4	addVlan
5	removeVlan

.1.3.6.1.2.1.180.1.1.1.3

pwEnetPortVlan

This object defines if the mapping between the original port
(physical port or VPLS virtual port) to the PW is VLAN based
or not. In case of VLAN mapping, this object indicates the
VLAN value on the original port.
…

Q-BRIDGE-MIBVlanIdOrAnyOrNoner/w

Type Constraints:
range: 0..4095

.1.3.6.1.2.1.180.1.1.1.4

pwEnetPortIfIndex

This object is used to specify the ifIndex of the Ethernet
port associated with this PW for point-to-point Ethernet
service, or the ifIndex of the virtual interface of the
VPLS instance associated with the PW if the ser…

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…

.1.3.6.1.2.1.180.1.1.1.5

pwEnetPwIfIndex

If the PW is modeled as an ifIndex in the ifTable, this
object indicates the value of the ifIndex representing the
Ethernet PW on the PSN side in the Etherlike-MIB. Note that
this value may be different from the value …

IF-MIBInterfaceIndexOrZeror/w

Type Constraints:
range: 0..2147483647

Description:

.1.3.6.1.2.1.180.1.1.1.6

pwEnetRowStatus

This object enables creating, deleting, and modifying this
row.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.2.1.180.1.1.1.7

pwEnetStorageType

This object indicates the storage type of this row.

SNMPv2-TCStorageTyper/w

Type Values:

1	other
2	volatile
3	nonVolatile
4	permanent
5	readOnly

Description:

Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …

.1.3.6.1.2.1.180.1.1.1.8

pwEnetStatsTable

table

.1.3.6.1.2.1.180.1.2 · 1 row entry · 2 columns

Open in standard view

Uses the rfc variant from /opt/observium/mibs/rfc.

Command help

Walk pwEnetStatsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-ENET-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-ENET-STD-MIB::pwEnetStatsTable'

This table contains statistical counters specific for
Ethernet PW.

pwEnetStatsEntry row .1.3.6.1.2.1.180.1.2.1

Each entry represents the statistics gathered for the
PW carrying the Ethernet.

Indexes

PW-STD-MIBpwIndex

Column	Syntax	OID
pwEnetStatsIllegalVlan The number of packets received (from the PSN) on this PW with either an illegal VLAN field, a missing VLAN field when one was expected, or an excessive VLAN field when it was not expected. This counter may not be appli…	RMON2-MIBZeroBasedCounter32	`.1.3.6.1.2.1.180.1.2.1.1`
pwEnetStatsIllegalLength The number of packets that were received with an illegal Ethernet packet length on this PW. An illegal length is defined as being greater than the value in the advertised MTU supported, or shorter than the allowed Ethe…	RMON2-MIBZeroBasedCounter32	`.1.3.6.1.2.1.180.1.2.1.2`