Standard view Table view

PW-ENET-STD-MIB

        This MIB module describes a model for managing Ethernet
point-to-point pseudowire services over a Packet
Switched Network (PSN).
        
Copyright (c) 2009 IETF Trust and the persons identified
as authors of the code.  All rights reserved.
        
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:
        
- Redistributions of source code must retain the above
  copyright notice, this list of conditions and the following
  disclaimer.
        
- Redistributions in binary form must reproduce the above
  copyright notice, this list of conditions and the following
  disclaimer in the documentation and/or other materials
  provided with the distribution.
        
- Neither the name of Internet Society, IETF or IETF Trust, nor
  the names of specific contributors, may be used to endorse or
  promote products derived from this software without specific
  prior written permission.
        
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
        
This version of this MIB module is part of RFC 5603;
        
see the RFC itself for full legal notices.
Source file
PW-ENET-STD-MIB
Last revised
Identity
pwEnetStdMIB
Base OID
1.3.6.1.2.1.180
Imported Objects
IF-MIB InterfaceIndexOrZero
PW-STD-MIB pwIndex
Q-BRIDGE-MIB VlanIdOrAnyOrNone
RMON2-MIB ZeroBasedCounter32
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC RowStatus StorageType
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'PW-ENET-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PW-ENET-STD-MIB::pwEnetStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PW-ENET-STD-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PW-ENET-STD-MIB::pwEnetStdMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (19)
pwEnetStdMIB
.1.3.6.1.2.1.180
pwEnetObjects
.1.3.6.1.2.1.180.1
pwEnetTable
.1.3.6.1.2.1.180.1.1
pwEnetEntry
PW-STD-MIBpwIndexpwEnetPwInstance
 .1.3.6.1.2.1.180.1.1.1
pwEnetPwInstance
SNMPv2-SMIUnsigned32
 .1.3.6.1.2.1.180.1.1.1.1
pwEnetPwVlan r/w
Q-BRIDGE-MIBVlanIdOrAnyOrNone
 .1.3.6.1.2.1.180.1.1.1.2
pwEnetVlanMode r/w
Enumeration
 .1.3.6.1.2.1.180.1.1.1.3
pwEnetPortVlan r/w
Q-BRIDGE-MIBVlanIdOrAnyOrNone
 .1.3.6.1.2.1.180.1.1.1.4
pwEnetPortIfIndex r/w
IF-MIBInterfaceIndexOrZero
 .1.3.6.1.2.1.180.1.1.1.5
pwEnetPwIfIndex r/w
IF-MIBInterfaceIndexOrZero
 .1.3.6.1.2.1.180.1.1.1.6
pwEnetRowStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.2.1.180.1.1.1.7
pwEnetStorageType r/w
SNMPv2-TCStorageType
 .1.3.6.1.2.1.180.1.1.1.8
pwEnetStatsTable
.1.3.6.1.2.1.180.1.2
pwEnetStatsEntry
PW-STD-MIBpwIndex
 .1.3.6.1.2.1.180.1.2.1
pwEnetStatsIllegalVlan
RMON2-MIBZeroBasedCounter32
 .1.3.6.1.2.1.180.1.2.1.1
pwEnetStatsIllegalLength
RMON2-MIBZeroBasedCounter32
 .1.3.6.1.2.1.180.1.2.1.2
pwEnetConformance
.1.3.6.1.2.1.180.2
pwEnetGroups
.1.3.6.1.2.1.180.2.1
pwEnetCompliances
.1.3.6.1.2.1.180.2.2
Dependencies (23) 7 direct · 16 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. HC-PerfHist-TC-MIBrfc
  8. IANA-PWE3-MIBrfc
  9. INET-ADDRESS-MIBrfc
  10. PerfHist-TC-MIBrfc
  11. PW-TC-STD-MIBrfc
  12. SNMP-FRAMEWORK-MIBrfc
  13. PW-STD-MIBrfc
  14. BRIDGE-MIBrfc
  15. P-BRIDGE-MIBrfc
  16. RMON-MIBrfc
  17. RFC-1212rfc
  18. RFC1155-SMIrfc
  19. RFC1213-MIBrfc
  20. RFC1271-MIBrfc
  21. TOKEN-RING-RMON-MIBrfc
  22. RMON2-MIBrfc
  23. Q-BRIDGE-MIBrfc
  24. PW-ENET-STD-MIBrfcselected
Conformance Groups (2)
pwEnetGroup
pwEnetPwVlan pwEnetVlanMode pwEnetPortVlan pwEnetPortIfIndex pwEnetPwIfIndex pwEnetRowStatus pwEnetStorageType
Collection of objects for basic Ethernet PW configuration.
 .1.3.6.1.2.1.180.2.1.1
pwEnetStatsGroup
pwEnetStatsIllegalVlan pwEnetStatsIllegalLength
Collection of objects counting various PW level errors.
 .1.3.6.1.2.1.180.2.1.2
Compliance Statements (2)

OID .1.3.6.1.2.1.180.2.2.1
The compliance statement for agents that provides full
support for the PW-ENET-STD-MIB module. Such devices
can then be monitored and also be configured using
this MIB module.
Required groups
mandatory pwEnetGroup
mandatory pwEnetStatsGroup
Object refinements
ObjectAccessSyntaxDescription
pwEnetVlanMode
An implementation MUST support at least the value
noChange(2).
pwEnetPwIfIndex readonly
Write access and values other than zero are
required only for implementations that support
modeling the Ethernet PW in the Etherlike-MIB.
pwEnetRowStatus readonly
SNMPv2-TCRowStatus
active(1), notInService(2), notReady(3)
Support for createAndWait is not required. Support
of notReady is not required for implementations that
do not support signaling.
Support of read-write is not required for
implementations that do not support more than one
VLAN mapping to the same PW.

OID .1.3.6.1.2.1.180.2.2.2
The compliance statement for agents that provide read-
only support for the PW-ENET-STD-MIB module. Such
devices can then be monitored but cannot be configured
using this MIB module.
Required groups
mandatory pwEnetGroup
mandatory pwEnetStatsGroup
Object refinements
ObjectAccessSyntaxDescription
pwEnetPwVlan readonly
Write access is not required.
pwEnetVlanMode readonly
Write access is not required. An implementation
MUST support at least the value noChange(2).
pwEnetPortVlan readonly
Write access is not required.
pwEnetPortIfIndex readonly
Write access is not required.
pwEnetPwIfIndex readonly
Write access is not required. Values other than
zero are required only for implementations that
support modeling the Ethernet PW in the
Etherlike-MIB.
pwEnetRowStatus readonly
SNMPv2-TCRowStatus
active(1), notInService(2), notReady(3)
Write access is not required. Support
of notReady is not required for implementations that
do not support signaling.
pwEnetStorageType readonly
Write access is not required.