PNNI-MIB Table View

The pnniNodeTable collects attributes that affect the
operation of a PNNI logical node.
          
There is a single row in this table for each PNNI peer
group that the managed system is expected or eligible
to become a member of.

pnniNodeEntry row .1.3.6.1.4.1.353.5.4.1.1.2.1

An entry in the table, containing information about a PNNI
logical node in this switching system.

Indexes

pnniNodeIndex

Column	Syntax	OID
pnniNodeIndex A value assigned to a node in this switching system that uniquely identifies it in the MIB.	PnniNodeIndex Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.4.1.1.2.1.1
pnniNodeLevel The level of PNNI hierarchy at which this node exists. This attribute is used to determine the default node ID and the default peer group ID for this node. This object may only be written when pnniNodeAdminStatus has th…	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.2.1.2
pnniNodeId The value the switching system is using to represent itself as this node. This object may only be written when pnniNodeAdminStatus has the value down. If pnniNodeLowest is true, then the default node ID t…	PnniNodeIdr/w Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.2.1.3
pnniNodeLowest Indicates whether this node acts as a lowest level node or whether this node is a logical group node that becomes active when one of the other nodes in this switching system becomes a peer group leader. The value 'fals…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.2.1.4
pnniNodeAdminStatus Indicates whether the administrative status of the node is up (the node is allowed to become active) or down (the node is forced to be inactive). When pnniNodeAdminStatus is down, then pnniNodeOperStatus …	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.353.5.4.1.1.2.1.5
pnniNodeOperStatus Indicates whether the node is active or whether the node has yet to become operational. When the value is down, all state has been cleared from the node and the node is not communicating with any of its neighbor nodes.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.353.5.4.1.1.2.1.6
pnniNodeDomainName The name of the PNNI routing domain in which this node participates. All lowest-level PNNI nodes with the same pnniNodeDomainName are presumed to be connected.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.353.5.4.1.1.2.1.7
pnniNodeAtmAddress This node's ATM End System Address. Remote systems wishing to exchange PNNI protocol packets with this node should direct packets or calls to this address. This attribute may only be written when pnniNod…	PnniAtmAddrr/w Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.4.1.1.2.1.8
pnniNodePeerGroupId The Peer Group Identifier of the peer group that the given node is to become a member of. The default value of this attribute has the first octet equal to pnniNodeLevel, the next pnniNodeLevel bits equal …	PnniPeerGroupIdr/w Type Constraints: range: 14	.1.3.6.1.4.1.353.5.4.1.1.2.1.9
pnniNodeRestrictedTransit Specifies whether the node is restricted to not allowing support of SVCs transiting this node. This attribute determines the setting of the restricted transit bit in the nodal information group originated by this node.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.2.1.10
pnniNodeComplexRep Specifies whether this node uses the complex node representation. A value of `true' indicates that the complex node representation is used, whereas a value of `false' indicates that the simple node representation is us…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.2.1.11
pnniNodeRestrictedBranching Indicates whether the node is able to support additional point-to-multipoint branches. A value of 'false' indicates that additional branches can be supported, and a value of 'true' indicates that additional branches ca…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.2.1.12
pnniNodeDatabaseOverload Specifies whether the node is currently operating in topology database overload state. This attribute has the same value as the Non-transit for PGL Election bit in the nodal information group originated by this node.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.2.1.13
pnniNodePtses Gauges the total number of PTSEs currently in this node's topology database(s).	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.2.1.14
pnniNodeRowStatus To create, delete, activate and de-activate a Node.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.353.5.4.1.1.2.1.15

Peer group leader election information for a PNNI node in
this switching system.

pnniNodePglEntry row .1.3.6.1.4.1.353.5.4.1.1.3.1

An entry in the table, containing PGL election information
of a PNNI logical node in this switching system.

Indexes

No indexes recorded

Column	Syntax	OID
pnniNodePglLeadershipPriority The Leadership priority value this node should advertise in its nodal information group for the given peer group. Only the value zero can be used with nodes that are not PGL/LGN capable. If there is no configured pare…	Integer32r/w Constraints: range: 0-205	.1.3.6.1.4.1.353.5.4.1.1.3.1.1
pnniNodeCfgParentNodeIndex The local node index used to identify the node that will represent this peer group at the next higher level of hierarchy, if this node becomes peer group leader. The value 0 indicates that there is no parent node.	PnniNodeIndexr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.4.1.1.3.1.2
pnniNodePglInitTime The amount of time in seconds this node will delay advertising its choice of preferred PGL after having initialized operation and reached the full state with at least one neighbor in the peer group.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.4.1.1.3.1.3
pnniNodePglOverrideDelay The amount of time in seconds a node will wait for itself to be declared the preferred PGL by unanimous agreement among its peers. In the absence of unanimous agreement this will be the amount of time that will pass be…	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.4.1.1.3.1.4
pnniNodePglReelectTime The amount of time in seconds after losing connectivity to the current peer group leader, that this node will wait before re-starting the process of electing a new peer group leader.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.4.1.1.3.1.5
pnniNodePglState Indicates the state that this node is in with respect to the Peer Group Leader election that takes place in the node's peer group. The values are enumerated in the Peer Group Leader State Machine.	Enumeration Enumerated Values: 1 starting 2 awaiting 3 awaitingFull 4 initialDelay 5 calculating 6 awaitUnanimity 7 operPgl 8 operNotPgl 9 hungElection 10 awaitReElection	.1.3.6.1.4.1.353.5.4.1.1.3.1.6
pnniNodePreferredPgl The Node ID of the node which the local node believes should be or become the peer group leader. This is also the value the local node is currently advertising in the `Preferred Peer Group Leader Node ID' field of its …	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.3.1.7
pnniNodePeerGroupLeader The Node Identifier of the node which is currently operating as peer group leader of the peer group this node belongs to. If a PGL has not been elected, this attribute's value is set to (all) zero(s).	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.3.1.8
pnniNodePglTimeStamp The time at which the current Peer Group Leader established itself.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.353.5.4.1.1.3.1.9
pnniNodeActiveParentNodeId The Node Identifier value being used by the Peer Group Leader to represent this peer group at the next higher level of the hierarchy. If this node is at the highest level of the hierarchy or if no PGL has yet been elect…	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.3.1.10

A table of initial PNNI timer values and significant
change thresholds.

pnniNodeTimerEntry row .1.3.6.1.4.1.353.5.4.1.1.4.1

An entry in the table, containing initial PNNI timer values
and significant change thresholds of a PNNI logical node in
this switching system.

Indexes

No indexes recorded

Column	Syntax	OID
pnniNodePtseHolddown The initial value for the PTSE hold down timer that will be used by the given node to limit the rate at which it can re-originate PTSEs. It must be a positive non-zero number.	100 millisecondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.4.1.1.4.1.1
pnniNodeHelloHolddown The initial value for the Hello hold down timer that will be used by the given node to limit the rate at which it sends Hellos. It must be a positive non-zero number.	100 millisecondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.4.1.1.4.1.2
pnniNodeHelloInterval The initial value for the Hello Timer. In the absence of triggered Hellos, this node will send one Hello packet on each of its ports on this interval.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.4.1.1.4.1.3
pnniNodeHelloInactivityFactor The value for the Hello Inactivity factor that this node will use to determine when a neighbor has gone down.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.4.1.1.4.1.4
pnniNodeHlinkInact The amount of time a node will continue to advertise a horizontal (logical) link for which it has not received and processed a LGN Horizontal Link information group.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.4.1.1.4.1.5
pnniNodePtseRefreshInterval The initial value for the Refresh timer that this node will use to drive (re-)origination of PTSEs in the absence of triggered updates.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.4.1.1.4.1.6
pnniNodePtseLifetimeFactor The value for the lifetime multiplier, expressed as a percentage. The result of multiplying the pnniNodePtseRefreshInterval attribute value by this attribute value is used as the initial lifetime that this node places …	percentInteger32r/w Constraints: range: 101-1000	.1.3.6.1.4.1.353.5.4.1.1.4.1.7
pnniNodeRxmtInterval The period between retransmissions of unacknowledged Database Summary packets, PTSE Request packets, and PTSPs.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.4.1.1.4.1.8
pnniNodePeerDelayedAckInterval The minimum amount of time between transmissions of delayed PTSE acknowledgement packets.	100 millisecondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.4.1.1.4.1.9
pnniNodeAvcrPm The proportional multiplier used in the algorithms that determine significant change for AvCR parameters, expressed as a percentage.	percentInteger32r/w Constraints: range: 1-99	.1.3.6.1.4.1.353.5.4.1.1.4.1.10
pnniNodeAvcrMt The minimum threshold used in the algorithms that determine significant change for AvCR parameters, expressed as a percentage.	percentInteger32r/w Constraints: range: 1-99	.1.3.6.1.4.1.353.5.4.1.1.4.1.11
pnniNodeCdvPm The proportional multiplier used in the algorithms that determine significant change for CDV metrics, expressed as a percentage.	percentInteger32r/w Constraints: range: 1-99	.1.3.6.1.4.1.353.5.4.1.1.4.1.12
pnniNodeCtdPm The proportional multiplier used in the algorithms that determine significant change for CTD metrics, expressed as a percentage.	percentInteger32r/w Constraints: range: 1-99	.1.3.6.1.4.1.353.5.4.1.1.4.1.13

A table of variables related to SVCC-based routing control
channels.

pnniNodeSvccEntry row .1.3.6.1.4.1.353.5.4.1.1.5.1

An entry in the table, containing SVCC-based RCC variables
of a PNNI logical node in this switching system.

Indexes

No indexes recorded

Column	Syntax	OID
pnniNodeSvccInitTime The amount of time this node will delay initiating establishment of an SVCC to a neighbor with a numerically lower ATM address, after determining that such an SVCC should be established.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.4.1.1.5.1.1
pnniNodeSvccRetryTime The amount of time this node will delay after an apparently still necessary and viable SVCC-based RCC is unexpectedly torn down, before attempting to re-establish it.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.4.1.1.5.1.2
pnniNodeSvccCallingIntegrityTime The amount of time this node will wait for an SVCC, which it has initiated establishment of as the calling party, to become fully established before giving up and tearing it down.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.4.1.1.5.1.3
pnniNodeSvccCalledIntegrityTime The amount of time this node will wait for an SVCC, which it has decided to accept as the called party, to become fully established before giving up and tearing it down.	secondsSNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.4.1.1.5.1.4
pnniNodeSvccTrafficDescriptorIndex An index into the atmTrafficDescrParamTable defined in RFC 1695. This traffic descriptor is used when establishing switched virtual channels for use as SVCC-based RCCs to/from PNNI logical group nodes.	ATM-TC-MIBAtmTrafficDescrParamIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.4.1.1.5.1.5

The pnniScopeTable contains the mappings of membership and
connection scope from organizational scope values (used at
UNI interfaces) to PNNI scope (i.e. in terms of PNNI
routing level indicators).

pnniScopeMappingEntry row .1.3.6.1.4.1.353.5.4.1.1.6.1

An entry in the table, containing scope mapping information
for a PNNI logical node in this switching system.

Indexes

No indexes recorded

Column	Syntax	OID
pnniScopeLocalNetwork The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value localNetwork(1).	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.6.1.1
pnniScopeLocalNetworkPlusOne The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value localNetworkPlusOne(2).	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.6.1.2
pnniScopeLocalNetworkPlusTwo The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value localNetworkPlusTwo(3).	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.6.1.3
pnniScopeSiteMinusOne The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value siteMinusOne(4).	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.6.1.4
pnniScopeIntraSite The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value intraSite(5).	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.6.1.5
pnniScopeSitePlusOne The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value sitePlusOne(6).	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.6.1.6
pnniScopeOrganizationMinusOne The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value organizationMinusOne(7).	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.6.1.7
pnniScopeIntraOrganization The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value intraOrganization(8).	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.6.1.8
pnniScopeOrganizationPlusOne The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value organizationPlusOne(9).	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.6.1.9
pnniScopeCommunityMinusOne The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value communityMinusOne(10).	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.6.1.10
pnniScopeIntraCommunity The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value intraCommunity(11).	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.6.1.11
pnniScopeCommunityPlusOne The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value communityPlusOne(12).	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.6.1.12
pnniScopeRegional The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value regional(13).	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.6.1.13
pnniScopeInterRegional The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value interRegional(14).	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.6.1.14
pnniScopeGlobal The highest level of PNNI hierarchy (i.e. smallest PNNI routing level) that lies within the organizational scope value global(15).	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.6.1.15

The pnniIfTable contains the attributes necessary to
configure a physical interface on a switching system which
is capable of being used for PNNI routing.  Interfaces may
represent physical connection points (i.e. copper/fiber
connection points) or VPCs which have been configured for
PNNI's use.  Each interface is attached to a specific
lowest-level node within the switching system.
          
An ifIndex is used as the instance ID to uniquely identify
the interface on the local switching system. This index has
the same value as the ifIndex object defined in RFC 1573
for the same interface, since this table correlates with
the ifTable in RFC 1573.
          
One row in this table is created by the managed system for
each row in the ifTable that has an ifType of atm(37) or
atmLogical(80).

pnniIfEntry row .1.3.6.1.4.1.353.5.4.1.1.8.1

An entry in the table, containing PNNI specific interface
information in this switching system.

Indexes

IF-MIBifIndex

Column	Syntax	OID
pnniIfNodeIndex Identifies the node within the switching system that the interface is directly attached to. The value zero is not a valid value.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.353.5.4.1.1.8.1.1
pnniIfPortId The Port Identifier of the port as selected by the PNNI protocol entity for the given interface. This value has meaning only within the context of the node to which the port is attached. The distinguished value zero i…	PnniPortId	.1.3.6.1.4.1.353.5.4.1.1.8.1.2
pnniIfAggrToken The configured aggregation token for this interface. The aggregation token controls what other links the link associated with this interface will be aggregated together with.	PnniAggrTokenr/w	.1.3.6.1.4.1.353.5.4.1.1.8.1.3
pnniIfVPCapability Indicates whether the interface is capable of having VPCs established within it or not. This object may only have the value `true' for physical ATM interfaces, i.e. those with an ifType of atm(37).	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.8.1.4
pnniIfAdmWeightCbr The administrative weight of this interface for the constant bit rate service category.	Unsigned32r/w Constraints: range: 1-16777215	.1.3.6.1.4.1.353.5.4.1.1.8.1.5
pnniIfAdmWeightRtVbr The administrative weight of this interface for the real-time variable bit rate service category.	Unsigned32r/w Constraints: range: 1-16777215	.1.3.6.1.4.1.353.5.4.1.1.8.1.6
pnniIfAdmWeightNrtVbr The administrative weight of this interface for the non-real-time variable bit rate service category.	Unsigned32r/w Constraints: range: 1-16777215	.1.3.6.1.4.1.353.5.4.1.1.8.1.7
pnniIfAdmWeightAbr The administrative weight of this interface for the available bit rate service category.	Unsigned32r/w Constraints: range: 1-16777215	.1.3.6.1.4.1.353.5.4.1.1.8.1.8
pnniIfAdmWeightUbr The administrative weight of this interface for the unspecified bit rate service category.	Unsigned32r/w Constraints: range: 1-16777215	.1.3.6.1.4.1.353.5.4.1.1.8.1.9
pnniIfRccServiceCategory The service category used for the PNNI routing control channel (VCI=18) on this interface.	ServiceCategoryr/w Type Values: 1 other 2 cbr 3 rtVbr 4 nrtVbr 5 abr 6 ubr	.1.3.6.1.4.1.353.5.4.1.1.8.1.10
pnniIfRccTrafficDescrIndex The traffic descriptor index referring to the entry in the atmTrafficDescrParamTable defined in RFC 1695 that specifies the traffic allocation for the PNNI routing control channel (VCI=18) on this interface.	ATM-TC-MIBAtmTrafficDescrParamIndexr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.4.1.1.8.1.11

This table contains the attributes necessary to describe
the operation of logical links attached to the local
switching system and the relationship with the neighbor
nodes on the other end of the links.  Links are attached to
a specific node within the switching system.  A
concatenation of the Node Index of the node within the
local switching system and the port ID are used as the
instance ID to uniquely identify the link.  Links may
represent horizontal links between lowest level neighboring
peers, outside links, uplinks, or horizontal links to/from
LGNs.
          
The entire pnniLink object is read-only, reflecting the
fact that this information is discovered dynamically by the
PNNI protocol rather than configured.

pnniLinkEntry row .1.3.6.1.4.1.353.5.4.1.1.9.1

An entry in the table, containing information about a link
attached to a PNNI logical node in this switching system.

Indexes

pnniNodeIndex pnniLinkPortId

Column	Syntax	OID
pnniLinkPortId The Port Identifier of the link as selected by the local node. This value has meaning only within the context of the node to which the port is attached.	PnniPortId	.1.3.6.1.4.1.353.5.4.1.1.9.1.1
pnniLinkType Indicates the type of link being described.	Enumeration Enumerated Values: 1 unknown 2 lowestLevelHorizontalLink 3 horizontalLinkToFromLgn 4 lowestLevelOutsideLink 5 uplink 6 outsideLinkAndUplink	.1.3.6.1.4.1.353.5.4.1.1.9.1.2
pnniLinkVersion For horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute indicates the version of PNNI routing protocol used to exchange information over this link. If communication wit…	PnniVersion Type Values: 1 unsupported 2 version1point0	.1.3.6.1.4.1.353.5.4.1.1.9.1.3
pnniLinkHelloState For horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute indicates the state of the Hello protocol exchange over this link. For links to/from LGNs, this attribute indica…	PnniHelloState Type Values: 1 notApplicable 2 down 3 attempt 4 oneWayInside 5 twoWayInside 6 oneWayOutside 7 twoWayOutside 8 commonOutside	.1.3.6.1.4.1.353.5.4.1.1.9.1.4
pnniLinkRemoteNodeId Indicates the node identifier of the remote (neighboring) node on the other end of the link. If the pnniLinkType is `outside link and uplink', this is the node identifier of the lowest-level neighbor node on the other …	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.9.1.5
pnniLinkRemotePortId Indicates the port identifier of the port at the remote end of the link as assigned by the remote node. If the pnniLinkType is `outside link and uplink', this is the port identifier assigned by the lowest-level neighbo…	PnniPortId	.1.3.6.1.4.1.353.5.4.1.1.9.1.6
pnniLinkDerivedAggrToken Indicates the derived aggregation token value used on this link. For horizontal links between lowest-level nodes and when the link type is not yet known, this attribute takes the value of zero.	PnniAggrToken	.1.3.6.1.4.1.353.5.4.1.1.9.1.7
pnniLinkUpnodeId For outside links and uplinks, this attribute contains the Node Identifier of the upnode (the neighbor node's identity at the level of the common peer group). When the upnode has not yet been identified, this attribute…	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.9.1.8
pnniLinkUpnodeAtmAddress For outside links and uplinks, this attribute contains the ATM End System Address used to establish connections to the upnode. When the upnode has not yet been identified, this attribute is set to zero. For horizontal…	PnniAtmAddr Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.4.1.1.9.1.9
pnniLinkCommonPeerGroupId For outside links and uplinks, this attribute contains the peer group identifier of the lowest level common Peer Group in the ancestry of the neighboring node and the node within the local switching system. The value o…	PnniPeerGroupId Type Constraints: range: 14	.1.3.6.1.4.1.353.5.4.1.1.9.1.10
pnniLinkIfIndex For horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute identifies the interface to which the logical link corresponds. For all other cases, the value of …	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.353.5.4.1.1.9.1.11
pnniLinkSvccRccIndex For horizontal links to/from LGNs, this attribute identifies the SVCC-based RCC used to exchange information with the neighboring peer logical group node. If the pnniLinkType is not `horizontal link to/from LGN', this …	PnniSvccRccIndex	.1.3.6.1.4.1.353.5.4.1.1.9.1.12
pnniLinkRcvHellos For horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute contains a count of the number of Hello Packets received over this link. If the pnniLinkType is `horizontal link…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.9.1.13
pnniLinkXmtHellos For horizontal and outside links between lowest-level nodes and for links of unknown type, this attribute contains a count of the number of Hello Packets transmitted over this link. If the pnniLinkType is `horizontal l…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.9.1.14

The pnniNbrPeer Object contains all the attributes
necessary to describe the relationship a node in this
switching system has with a neighboring node within the
same peer group.  A concatenation of the Node Identifier of
the node within the local switching system and the
neighboring peer's Node Identifier is used to form the
instance ID for this object.
          
The entire pnniNbrPeer object is read-only, reflecting the
fact that neighboring peers are discovered dynamically by
the PNNI protocol rather than configured.

pnniNbrPeerEntry row .1.3.6.1.4.1.353.5.4.1.1.10.1

An entry in the table, containing information about this
node's relationship with a neighboring peer node.

Indexes

pnniNodeIndex pnniNbrPeerRemoteNodeId

Column	Syntax	OID
pnniNbrPeerRemoteNodeId The Node Identifier of the neighboring peer node.	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.10.1.1
pnniNbrPeerState Indicates the state of this node's Neighboring Peer State Machine associated with pnniNbrPeerRemoteNodeId.	Enumeration Enumerated Values: 1 npdown 2 negotiating 3 exchanging 4 loading 5 full	.1.3.6.1.4.1.353.5.4.1.1.10.1.2
pnniNbrPeerSvccRccIndex Identifies the SVCC-based RCC being used to communicate with the neighboring peer if one exists. If both the local node and the neighboring peer node are lowest-level nodes, this attribute is set to zero.	PnniSvccRccIndex	.1.3.6.1.4.1.353.5.4.1.1.10.1.3
pnniNbrPeerPortCount A count of the total number of ports that connect to the neighboring peer. If the neighboring peer only communicates via an SVCC-based RCC, the value of this attribute is set to zero. Otherwise it is set to the total …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.10.1.4
pnniNbrPeerRcvDbSums A count of the number of Database Summary Packets received from the neighboring peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.10.1.5
pnniNbrPeerXmtDbSums A count of the number of Database Summary Packets transmitted to the neighboring peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.10.1.6
pnniNbrPeerRcvPtsps A count of the number of PTSPs received from the neighboring peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.10.1.7
pnniNbrPeerXmtPtsps A count of the number of PTSPs (re)transmitted to the neighboring peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.10.1.8
pnniNbrPeerRcvPtseReqs A count of the number of PTSE Request packets received from the neighboring peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.10.1.9
pnniNbrPeerXmtPtseReqs A count of the number of PTSE Request packets transmitted to the neighboring peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.10.1.10
pnniNbrPeerRcvPtseAcks A count of the number of PTSE Ack packets received from the neighboring peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.10.1.11
pnniNbrPeerXmtPtseAcks A count of the number of PTSE Ack packets transmitted to the neighboring peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.10.1.12

A table of all ports in Hello state 2-Way Inside to a given
neighboring peer node.  A concatenation of the Node Index
of the node within the local switching system, the
neighbor's Node Identifier and the Interface Index of the
port being described forms the instance ID for this object.
This object is only used for lowest-level nodes.

pnniNbrPeerPortEntry row .1.3.6.1.4.1.353.5.4.1.1.11.1

An entry in the table, containing information about a port
in the Hello state 2-Way Inside from a PNNI logical node in
this switching system to a neighboring peer node.

Indexes

pnniNodeIndex pnniNbrPeerRemoteNodeId pnniNbrPeerPortId

Column	Syntax	OID
pnniNbrPeerPortId The port ID of a port to the neighboring peer that is in the Hello state 2-Way Inside.	PnniPortId	.1.3.6.1.4.1.353.5.4.1.1.11.1.1
pnniNbrPeerPortFloodStatus Indicates whether the port is being used for transmission of flooding and database synchronization information to the neighboring peer.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.11.1.2

A table containing the attributes necessary to analyze the
operation of the PNNI protocol on SVCC-based Routing
Control Channels. This entire object is read-only,
reflecting the fact that SVCC-based RCCs are established
dynamically during operation of the PNNI protocol rather
than configured.

pnniSvccRccEntry row .1.3.6.1.4.1.353.5.4.1.1.12.1

An entry in the table, containing information about an
SVCC-based RCC from a PNNI logical node in this switching
system.

Indexes

pnniNodeIndex pnniSvccRccIndex

Column	Syntax	OID
pnniSvccRccIndex An index into the node's tables of SVCC-based RCCs.	PnniSvccRccIndex	.1.3.6.1.4.1.353.5.4.1.1.12.1.1
pnniSvccRccVersion The version of the PNNI routing protocol used to exchange information with the neighbor node.	PnniVersion Type Values: 1 unsupported 2 version1point0	.1.3.6.1.4.1.353.5.4.1.1.12.1.2
pnniSvccRccHelloState The state of the Hello protocol exchange over the SVCC-based RCC. Note: the Down state indicates that the SVCC establishment is in progress.	PnniHelloState Type Values: 1 notApplicable 2 down 3 attempt 4 oneWayInside 5 twoWayInside 6 oneWayOutside 7 twoWayOutside 8 commonOutside	.1.3.6.1.4.1.353.5.4.1.1.12.1.3
pnniSvccRccRemoteNodeId The remote node at which the SVCC-based RCC terminates.	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.12.1.4
pnniSvccRccRemoteAtmAddress The ATM End System Address to which SVCC establishment is attempted.	PnniAtmAddr Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.4.1.1.12.1.5
pnniSvccRccRcvHellos A count of the number of Hello Packets received over this SVCC-based RCC.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.12.1.6
pnniSvccRccXmtHellos A count of the number of Hello Packets transmitted over this SVCC-based RCC.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.12.1.7
pnniSvccRccIfIndex The interface from which the SVCC-based RCC leaves the switching system. If the SVCC-based RCC has not yet been established, then this attribute takes the value of zero.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.353.5.4.1.1.12.1.8
pnniSvccRccVpi The VPI used at the interface from which the SVCC-based RCC leaves the switching system. If the SVCC-based RCC has not yet been established, then this attribute takes the value of zero	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.353.5.4.1.1.12.1.9
pnniSvccRccVci The VCI used at the interface from which the SVCC-based RCC leaves the switching system. If the SVCC-based RCC has not yet been established, then this attribute takes the value of zero	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.353.5.4.1.1.12.1.10

The pnniPtse object contains the attributes that describe
the most recent instances of PTSEs in a node's topology
database.  A concatenation of the Node Identifier of the
local node that received the PTSE, the originating Node's
Node Identifier and the PTSE Identifier are used to form
the instance ID for an instance of this object.

pnniPtseEntry row .1.3.6.1.4.1.353.5.4.1.1.13.1

An entry in the table, containing information about a PTSE
in the topology database of a PNNI logical node in this
switching system.

Indexes

pnniNodeIndex pnniPtseOriginatingNodeId pnniPtseId

Column	Syntax	OID
pnniPtseOriginatingNodeId The Node Identifier of the node that originated the PTSE.	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.13.1.1
pnniPtseId The value of the PTSE Identifier assigned to the PTSE by its originator.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.13.1.2
pnniPtseType The type of information contained in the PTSE.	Enumeration Enumerated Values: 1 other 96 nodalStateParameters 97 nodalInformation 224 internalReachableAddresses 256 exteriorReachableAddresses 288 horizontalLinks 289 uplinks	.1.3.6.1.4.1.353.5.4.1.1.13.1.3
pnniPtseSequenceNum The sequence number of the instance of the PTSE as it appears in the local topology database.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.13.1.4
pnniPtseChecksum The value of the PTSE checksum as it appears in the local topology database.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.353.5.4.1.1.13.1.5
pnniPtseLifeTime The value of the remaining lifetime for the given PTSE as it appears in the local topology database.	secondsUnsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.353.5.4.1.1.13.1.6
pnniPtseInfo An unformatted hexadecimal dump of the PTSE contents in full. Note: If the size of the PTSE contents is larger than the maximum size of SNMP packets then this is truncated.	OctetString Constraints: range: 0-65535	.1.3.6.1.4.1.353.5.4.1.1.13.1.7

A table containing attributes necessary to find and analyze
the operation of all links and nodes within the PNNI
hierarchy, as seen from the perspective of a local node.
An instance of a pnniMap Object describes a link in terms
of a node at one end of the link.  Normally there will be
two instances of the pnniMap object in the MIB for each
horizontal link. The two instances provide information for
Network management to map port identifiers from the nodes
at both ends to the link between them.  A concatenation of
the Local Node Index, Originating Node Identifier and
Originating Port Identifier are used to form the instance
ID for this object.
          
This entire object is read-only, reflecting the fact that
the map is discovered dynamically during operation of the
PNNI protocol rather than configured.

pnniMapEntry row .1.3.6.1.4.1.353.5.4.1.1.14.1

An entry in the table, containing connectivity information
about a node or link in the PNNI routing domain, as seen
from the perspective of a PNNI logical node in this
switching system.

Indexes

pnniNodeIndex pnniMapOriginatingNodeId pnniMapOriginatingPortId pnniMapIndex

Column	Syntax	OID
pnniMapOriginatingNodeId The node identifier of the node whose connectivity within itself or to other nodes is being described.	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.14.1.1
pnniMapOriginatingPortId The port identifier of the port as assigned by the originating node, to which the port is attached.	PnniPortId	.1.3.6.1.4.1.353.5.4.1.1.14.1.2
pnniMapIndex An index into the set of link and nodal connectivity associated with the originating node and port. This index is needed since there may be multiple entries for nodal connectivity from a specific node and port pair, in…	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.353.5.4.1.1.14.1.3
pnniMapType The type of PNNI entity being described by this entry in the table.	Enumeration Enumerated Values: 1 horizontalLink 2 uplink 3 node	.1.3.6.1.4.1.353.5.4.1.1.14.1.4
pnniMapPeerGroupId Identifies the peer group of the originating node.	PnniPeerGroupId Type Constraints: range: 14	.1.3.6.1.4.1.353.5.4.1.1.14.1.5
pnniMapAggrToken For horizontal links to/from LGNs and for uplinks, this attribute contains the derived aggregation token value for this link. For nodes and for horizontal links between lowest-level nodes, this attribute is set to zero.	PnniAggrToken	.1.3.6.1.4.1.353.5.4.1.1.14.1.6
pnniMapRemoteNodeId For horizontal links and uplinks, this attribute contains the node identifier of the node at the other end of the link from the originating node. If unknown, the PNNI protocol entity sets this attribute's value to (all…	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.14.1.7
pnniMapRemotePortId For horizontal links and uplinks, this attribute contains the port identifier of the port at the remote end of the link as assigned by the remote node. If unknown, the PNNI protocol entity sets this attribute's value t…	PnniPortId	.1.3.6.1.4.1.353.5.4.1.1.14.1.8
pnniMapVPCapability Indicates whether VPCs can be established across the PNNI entity being described by this entry in the pnniMapTable.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.14.1.9
pnniMapPtseId The value of the PTSE Identifier for the PTSE being originated by the originating node which contains the information group(s) describing the PNNI entity.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.14.1.10
pnniMapMetricsTag An arbitrary integer that is used to associate a set of traffic parameters that are always advertised together. Within this set, the parameters are distinguished by the service categories and direction to which a set of…	PnniMetricsTag Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.4.1.1.14.1.11

A list of nodes as seen from the perspective of a local
node.  The pnniMapNodeTable contains all information
learned by the local node from nodal information PTSEs.
This entire object is read-only, reflecting the fact that
the map is discovered dynamically during operation of the
PNNI protocol rather than configured.

pnniMapNodeEntry row .1.3.6.1.4.1.353.5.4.1.1.15.1

An entry in the table, containing information about a node
in the PNNI routing domain, as seen from the perspective of
a logical node in this switching system.

Indexes

pnniNodeIndex pnniMapNodeId

Column	Syntax	OID
pnniMapNodeId Identifies the node whose nodal information is being described.	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.15.1.1
pnniMapNodePeerGroupId Identifies the peer group of the originating node.	PnniPeerGroupId Type Constraints: range: 14	.1.3.6.1.4.1.353.5.4.1.1.15.1.2
pnniMapNodeAtmAddress The ATM End System Address of the originating node.	PnniAtmAddr Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.4.1.1.15.1.3
pnniMapNodeRestrictedTransit Indicates whether the originating node is restricted to only allow support of SVCs originating or terminating at this node. A value of `true' indicates that the transit capabilities are restricted, i.e., transit connec…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.15.1.4
pnniMapNodeComplexRep Indicates whether the originating node uses the complex node representation. If the value is `true', the spokes and bypasses that make up the complex node representation should be found in the pnniMapTable. This attri…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.15.1.5
pnniMapNodeRestrictedBranching Indicates whether the originating node is able to support additional branches. If the value is 'false', then it can support additional branches. This attribute reflects the setting of the restricted branching bit rece…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.15.1.6
pnniMapNodeDatabaseOverload Indicates whether the originating node is currently operating in topology database overload state. This attribute has the same value as the Non-transit for PGL Election bit in the nodal information group originated by …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.15.1.7
pnniMapNodeIAmLeader Indicates whether the originating node claims to be peer group leader of its peer group. This attribute reflects the setting of the 'I am Leader' bit received in the nodal information PTSE of the originating node.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.15.1.8
pnniMapNodeLeadershipPriority The Leadership priority value advertised by the originating node.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.353.5.4.1.1.15.1.9
pnniMapNodePreferredPgl Identifies the node which the originating node believes should be or is peer group leader of its peer group. If the originating node has not chosen a Preferred PGL, this attribute's value is set to (all) zero(s).	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.15.1.10
pnniMapNodeParentNodeId When the originating node is a peer group leader, indicates the node ID of the parent LGN. If the originating node is not peer group leader of its peer group, this attribute's value is set to (all) zero(s).	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.15.1.11
pnniMapNodeParentAtmAddress When the originating node is a peer group leader, indicates the ATM address of the parent LGN. If the originating node is not peer group leader of its peer group, this attribute's value is set to (all) zero(s).	PnniAtmAddr Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.4.1.1.15.1.12
pnniMapNodeParentPeerGroupId When the originating node is a peer group leader, indicates the node's parent peer group ID. If the originating node is not peer group leader of its peer group, this attribute's value is set to (all) zero(s).	PnniPeerGroupId Type Constraints: range: 14	.1.3.6.1.4.1.353.5.4.1.1.15.1.13
pnniMapNodeParentPglNodeId When the originating node is a peer group leader, identifies the node elected as peer group leader of the parent peer group. If the originating node is not peer group leader of its peer group, this attribute's value is…	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.15.1.14

The pnniMapAddr MIB Object contains a list of all reachable
addresses from each node visible to the local node.  The
Local Node Index, Advertising Node ID, Advertised Port ID,
Reachable Address, and Address prefix length are combined
to form an instance ID for this object.  The entire object
is read-only, reflecting the fact that reachable addresses
are discovered during dynamic operation of the PNNI
protocol rather than configured.

pnniMapAddrEntry row .1.3.6.1.4.1.353.5.4.1.1.16.1

An entry in the table, containing information about an
address prefix reachable from a node in the PNNI routing
domain, as seen from the perspective of a PNNI logical node
in this switching system.

Indexes

pnniNodeIndex pnniMapAddrAdvertisingNodeId pnniMapAddrAdvertisedPortId pnniMapAddrIndex

Column	Syntax	OID
pnniMapAddrAdvertisingNodeId The node ID of a node advertising reachability to the address prefix.	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.16.1.1
pnniMapAddrAdvertisedPortId The port identifier used from the advertising node to reach the given address prefix.	PnniPortId	.1.3.6.1.4.1.353.5.4.1.1.16.1.2
pnniMapAddrIndex An arbitrary index that is used to enumerate all of the addresses advertised by the specified node.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.4.1.1.16.1.3
pnniMapAddrAddress The value of the ATM End System Address prefix.	AtmAddrPrefix Type Constraints: range: 19	.1.3.6.1.4.1.353.5.4.1.1.16.1.4
pnniMapAddrPrefixLength The Prefix length to be applied to the ATM End System Address prefix.	PnniPrefixLength Type Constraints: range: 0..152	.1.3.6.1.4.1.353.5.4.1.1.16.1.5

A list of all reachable transit networks from each node
visible to the local node.  The Local Node Index,
Advertising Node ID, Advertised Port ID, Transit Network
Type, Transit Network Plan, and Transit Network ID are
combined to form an instance ID for this object. The entire
object is read-only, reflecting the fact that reachable
transit networks are discovered during dynamic operation of
the PNNI protocol rather than configured.

pnniMapTnsEntry row .1.3.6.1.4.1.353.5.4.1.1.17.1

An entry in the table, containing information about a
transit network reachable from a node in the PNNI routing
domain, as seen from the perspective of a PNNI logical node
in this switching system.

Indexes

pnniNodeIndex pnniMapTnsAdvertisingNodeId pnniMapTnsAdvertisedPortId pnniMapTnsType pnniMapTnsPlan pnniMapTnsId

Column	Syntax	OID
pnniMapTnsAdvertisingNodeId The node ID of a node advertising reachability to the transit network.	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.17.1.1
pnniMapTnsAdvertisedPortId The port identifier used from the advertising node to reach the given transit network.	PnniPortId	.1.3.6.1.4.1.353.5.4.1.1.17.1.2
pnniMapTnsType The type of network identification used for this transit network.	TnsType Type Values: 2 nationalNetworkIdentification 8 other	.1.3.6.1.4.1.353.5.4.1.1.17.1.3
pnniMapTnsPlan The network identification plan according to which network identification has been assigned.	TnsPlan Type Values: 1 carrierIdentificationCode 16 other	.1.3.6.1.4.1.353.5.4.1.1.17.1.4
pnniMapTnsId The value of the transit network identifier.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.353.5.4.1.1.17.1.5

This entity's table of PNNI parameters either associated
with a PNNI entity or for the connectivity between a PNNI
node and a reachable address or transit network.

pnniMetricsEntry row .1.3.6.1.4.1.353.5.4.1.1.18.1

A set of parameters that applies to the connectivity from a
certain node and port to another node or port or to one or
more reachable address prefixes and/or transit networks,
for one (or more) particular service catego…

Indexes

pnniNodeIndex pnniMetricsTag pnniMetricsDirection pnniMetricsIndex

Column	Syntax	OID
pnniMetricsTag An arbitrary integer that is used to associate a set of traffic parameters that are always advertised together. Within this set, the parameters are distinguished by the service categories and direction to which a set of…	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.4.1.1.18.1.1
pnniMetricsDirection The direction, with respect to the advertising node, in which the parameters in this entry apply.	Enumeration Enumerated Values: 1 incoming 2 outgoing	.1.3.6.1.4.1.353.5.4.1.1.18.1.2
pnniMetricsIndex An index into the set of parameters associated with the given tag and direction.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.4.1.1.18.1.3
pnniMetricsClasses The service categories to which this set of parameters applies. This is an integer used as a bit mask with each bit that is set representing a single service category for which the resources indicated are available. B…	Integer32r/w Constraints: range: 0-31	.1.3.6.1.4.1.353.5.4.1.1.18.1.4
pnniMetricsGcacClp Indicates whether the advertised GCAC parameters apply for CLP=0 traffic or for CLP=0+1 traffic.	ClpTyper/w Type Values: 1 clpEqual0 2 clpEqual0Or1	.1.3.6.1.4.1.353.5.4.1.1.18.1.5
pnniMetricsAdminWeight The administrative weight from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories.	Unsigned32r/w Constraints: range: 1-16777215	.1.3.6.1.4.1.353.5.4.1.1.18.1.6
pnniMetrics1 An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.18.1.7
pnniMetrics2 An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.18.1.8
pnniMetrics3 An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.18.1.9
pnniMetrics4 An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.18.1.10
pnniMetrics5 An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For PNNI, this is the ce…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.18.1.11
pnniMetrics6 An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For PNNI, this is the ce…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.18.1.12
pnniMetrics7 An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.18.1.13
pnniMetrics8 An alternate routing parameter from the advertising node to the remote end of the PNNI entity or to the reachable address or transit network, for the specified service categories. For information learned …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.18.1.14
pnniMetricsRowStatus To create, delete, activate and de-activate a set of metrics.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.353.5.4.1.1.18.1.15

This entity's PNNI Routing table (of routes to other
nodes).

pnniRouteNodeEntry row .1.3.6.1.4.1.353.5.4.1.1.19.2.1

A particular route to a particular destination node, under
a particular policy.

Indexes

pnniNodeIndex pnniRouteNodeClass pnniRouteNodeDestNodeId pnniRouteNodeDTL

Column	Syntax	OID
pnniRouteNodeClass Indicates the service category with which this forwarding table entry is associated.	ServiceCategory Type Values: 1 other 2 cbr 3 rtVbr 4 nrtVbr 5 abr 6 ubr	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.1
pnniRouteNodeDestNodeId The node ID of the destination node to which this route proceeds, and at which the DTL stack for this route terminates.	PnniNodeId Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.2
pnniRouteNodeDTL The index into the owning PNNI node's DTL table of the DTL stack that goes with this route.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.3
pnniRouteNodeDestPortId The port ID of the destination node at which the route terminates. A port ID of zero indicates the node nucleus. When the destination node is represented by the simple node representation, this value should be set to z…	PnniPortIdr/w	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.4
pnniRouteNodeProto The routing mechanism via which this route was learned.	Enumeration Enumerated Values: 1 other 2 local 3 mgmt 4 pnni	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.5
pnniRouteNodeTimeStamp The time at which this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route w…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.6
pnniRouteNodeInfo A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's pnniRouteNodeProto value. If this information is not p…	ObjectIdentifierr/w	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.7
pnniRouteNodeGcacClp For PNNI, indicates whether any advertised GCAC parameters apply for CLP=0 traffic or for CLP=0+1 traffic.	ClpTyper/w Type Values: 1 clpEqual0 2 clpEqual0Or1	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.8
pnniRouteNodeFwdMetricAW The cumulative administrative weight calculated for the forward direction of this route. If this metric is not used, its value should be set to 0xFFFFFFFF.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.9
pnniRouteNodeFwdMetric1 An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the maximum possible cell rate (in cells per second) for the forward direction of t…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.10
pnniRouteNodeFwdMetric2 An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the Available cell rate (in cells per second) for the forward direction of the rout…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.11
pnniRouteNodeFwdMetric3 An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the cumulative Maximum Cell Transfer Delay (in microseconds) for the forward direct…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.12
pnniRouteNodeFwdMetric4 An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Delay Variation (in microseconds) for the forward direction of …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.13
pnniRouteNodeFwdMetric5 An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Loss Ratio for CLP=0 traffic for the forward direction of the r…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.14
pnniRouteNodeFwdMetric6 An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Loss Ratio for CLP=0+1 traffic for the forward direction of the…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.15
pnniRouteNodeFwdMetric7 An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the Cell Rate Margin (in cells per second) for the forward direction of the route. …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.16
pnniRouteNodeFwdMetric8 An alternate routing parameter for the forward direction of this route. For information learned from PNNI nodes, this is the Variance Factor (in units of 2**(-8)) for the forward direction of the route. …	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.17
pnniRouteNodeBwdMetricAW The administrative weight calculated for the backward direction of this route. If this metric is not used, its value should be set to 0xFFFFFFFF.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.18
pnniRouteNodeBwdMetric1 An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the maximum possible cell rate (in cells per second) for the backward direction of…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.19
pnniRouteNodeBwdMetric2 An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the Available cell rate (in cells per second) for the backward direction of the ro…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.20
pnniRouteNodeBwdMetric3 An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the cumulative Maximum Cell Transfer Delay (in microseconds) for the backward dire…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.21
pnniRouteNodeBwdMetric4 An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Delay Variation (in microseconds) for the backward direction o…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.22
pnniRouteNodeBwdMetric5 An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Loss Ratio for CLP=0 traffic for the backward direction of the…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.23
pnniRouteNodeBwdMetric6 An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the cumulative Cell Loss Ratio for CLP=0+1 traffic for the backward direction of t…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.24
pnniRouteNodeBwdMetric7 An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the Cell Rate Margin (in cells per second) for the backward direction of the route…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.25
pnniRouteNodeBwdMetric8 An alternate routing parameter for the backward direction of this route. For information learned from PNNI nodes, this is the Variance Factor (in units of 2**(-8)) for the backward direction of the route.…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.26
pnniRouteNodeVPCapability This attribute indicates whether a VPC setup on this route is possible.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.27
pnniRouteNodeStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.353.5.4.1.1.19.2.1.28

The set of all DTL stacks used for the pre-computed routes
maintained by this managed entity.

pnniDTLEntry row .1.3.6.1.4.1.353.5.4.1.1.19.3.1

A segment of a DTL stack. The complete DTL stack is formed
by traversing the rows of the table for which the
pnniDTLIndex is the same. Level transitions are indicated
using the pnniDLTLinkType column.

Indexes

pnniNodeIndex pnniDTLIndex pnniDTLEntryIndex

Column	Syntax	OID
pnniDTLIndex The index in the node's DTL table of this DTL stack.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.4.1.1.19.3.1.1
pnniDTLEntryIndex The index in the current DTL stack of this entry.	Integer32 Constraints: range: 1-200	.1.3.6.1.4.1.353.5.4.1.1.19.3.1.2
pnniDTLNodeId The node which is this hop in the DTL stack.	PnniNodeIdr/w Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.19.3.1.3
pnniDTLPortId The port from the pnniDTLNodeId to use as the exit. If the DTL stack does not care, this is coded as zero.	PnniPortIdr/w	.1.3.6.1.4.1.353.5.4.1.1.19.3.1.4
pnniDTLLinkType The type of link out from this node (pnniDTLNodeId). This is well defined even if the specific port is not specified.	Enumerationr/w Enumerated Values: 1 invalid 2 horizontal 3 uplink 4 last	.1.3.6.1.4.1.353.5.4.1.1.19.3.1.5
pnniDTLStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.353.5.4.1.1.19.3.1.6

A table containing all the attributes necessary to
determine what the PNNI entity believes is reachable in
terms of ATM End System Addresses and to determine which
nodes are advertising this reachability.  This table is
also used to configure static routes to reachable address
prefixes.  The local node index that received the
reachability information, reachable address, address prefix
length, and an index that distinguishes between multiple
listings of connectivity to a given address prefix from a
given local node are combined to form an instance ID for
this object.

pnniRouteAddrEntry row .1.3.6.1.4.1.353.5.4.1.1.19.4.1

An entry in the table, containing information about a
reachable address prefix.

Indexes

pnniNodeIndex pnniRouteAddrAddress pnniRouteAddrPrefixLength pnniRouteAddrIndex

Column	Syntax	OID
pnniRouteAddrAddress The value of the ATM End System Address prefix.	AtmAddrPrefix Type Constraints: range: 19	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.1
pnniRouteAddrPrefixLength The prefix length to be applied to the ATM End System Address prefix.	PnniPrefixLength Type Constraints: range: 0..152	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.2
pnniRouteAddrIndex An index into the set of listings of connectivity to a given address prefix from a given local node.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.3
pnniRouteAddrIfIndex The local interface over which the reachable address can be reached. The value zero indicates an unknown interface or reachability through a remote node. This object may only have a non-zero value if the…	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.4
pnniRouteAddrAdvertisingNodeId The node ID of a node advertising reachability to the address prefix. If the local node index is zero, then the advertising node ID must be set to all zeros.	PnniNodeIdr/w Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.5
pnniRouteAddrAdvertisedPortId The port identifier used from the advertising node to reach the given address prefix.	PnniPortIdr/w	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.6
pnniRouteAddrType The type (e.g. internal or exterior) of reachability from the advertising node to the address prefix. Reject(2) refers to an address prefix which, if matched, indicates that the message should be discarde…	Enumerationr/w Enumerated Values: 1 other 2 reject 3 internal 4 exterior	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.7
pnniRouteAddrProto The routing mechanism via which the connectivity from the advertising node to the reachable address prefix was learned.	Enumeration Enumerated Values: 1 other 2 local 3 mgmt 4 pnni	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.8
pnniRouteAddrPnniScope The PNNI scope of advertisement (i.e. level of PNNI hierarchy) of the reachability from the advertising node to the address prefix.	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.9
pnniRouteAddrVPCapability Indicates whether VPCs can be established from the advertising node to the reachable address prefix.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.10
pnniRouteAddrMetricsTag The index into the pnniMetricsTable for the traffic parameter values that apply for the connectivity from the advertising node to the reachable address prefix. There will be one or more entries in the pnniMetricsTable …	PnniMetricsTagr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.11
pnniRouteAddrPtseId For reachable addresses learned via PNNI, this attribute contains the value of the PTSE Identifier for the PTSE being originated by the originating node which contains the information group(s) describing the reachable a…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.12
pnniRouteAddrOriginateAdvertisement Whether or not the reachable address specified by this entry is to be advertised by the local node into its PNNI routing domain. This object may only take on the value 'true' when the value of the corresp…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.13
pnniRouteAddrInfo A reference to MIB definitions specific to the particular routing protocol which is responsible for this reachable address prefix, as determined by the value specified in the route's pnniRouteAddrProto value. If this i…	ObjectIdentifierr/w	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.14
pnniRouteAddrOperStatus Indicates whether the reachable address prefix is operationally valid and whether it is being advertised by this node.	Enumeration Enumerated Values: 1 inactive 2 active 3 advertised	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.15
pnniRouteAddrTimeStamp Indicates when the connectivity from the advertising node to the reachable address prefix became known to the local node.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.16
pnniRouteAddrRowStatus To create, delete, activate and de-activate a reachable address prefix.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.353.5.4.1.1.19.4.1.17

A table containing all the attributes necessary to
determine what transit networks the PNNI entity believes
are reachable and to determine which nodes are advertising
this reachability.  This table is also used to add static
routes to reachable transit networks.  The local node index
which received the reachability information, type of
network identification, network identification plan,
transit network identifier, and an index that distinguishes
between multiple listings of connectivity to a given
transit network from a given local node are combined to
form an instance ID for this object.

pnniRouteTnsEntry row .1.3.6.1.4.1.353.5.4.1.1.19.5.1

An entry in the table, containing information about a
reachable transit network.

Indexes

pnniNodeIndex pnniRouteTnsType pnniRouteTnsPlan pnniRouteTnsId pnniRouteTnsIndex

Column	Syntax	OID
pnniRouteTnsType The type of network identification used for this transit network.	TnsType Type Values: 2 nationalNetworkIdentification 8 other	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.1
pnniRouteTnsPlan The network identification plan according to which network identification has been assigned.	TnsPlan Type Values: 1 carrierIdentificationCode 16 other	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.2
pnniRouteTnsId The value of the transit network identifier.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.3
pnniRouteTnsIndex An index into the set of listings of connectivity to a given transit network from a given local node.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.4
pnniRouteTnsIfIndex The local interface over which the transit network can be reached. The value zero indicates an unknown interface or reachability through a remote node. This object may only have a non-zero value if the v…	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.5
pnniRouteTnsAdvertisingNodeId The node ID of a node advertising reachability to the transit network. If the local node index is zero, then the advertising node ID must also be set to zero.	PnniNodeIdr/w Type Constraints: range: 22	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.6
pnniRouteTnsAdvertisedPortId The port identifier used from the advertising node to reach the given transit network.	PnniPortIdr/w	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.7
pnniRouteTnsRouteType The type (e.g. exterior or other) of reachability from the advertising node to the transit network.	Enumerationr/w Enumerated Values: 1 other 4 exterior	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.8
pnniRouteTnsProto The routing mechanism via which the connectivity from the advertising node to the transit network was learned.	Enumeration Enumerated Values: 1 other 2 local 3 mgmt 4 pnni	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.9
pnniRouteTnsPnniScope The PNNI scope of advertisement (i.e. level of PNNI hierarchy) of the reachability from the advertising node to the transit network.	PnniLevelr/w Type Constraints: range: 0..104	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.10
pnniRouteTnsVPCapability Indicates whether VPCs can be established from the advertising node to the reachable transit network.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.11
pnniRouteTnsMetricsTag The index into the pnniMetricsTable for the traffic parameter values that apply for the connectivity from the advertising node to the transit network. There will be one or more entries in the pnniMetricsTable whose fir…	PnniMetricsTagr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.12
pnniRouteTnsPtseId For reachable transit networks learned via PNNI, this attribute contains the value of the PTSE Identifier for the PTSE being originated by the originating node which contains the information group(s) describing the tran…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.13
pnniRouteTnsOriginateAdvertisement Whether or not the transit network specified by this entry is to be advertised by the local node into its PNNI routing domain. This object may only take on the value 'true' when the value of the correspon…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.14
pnniRouteTnsInfo A reference to MIB definitions specific to the particular routing protocol which is responsible for this transit network, as determined by the value specified in the route's pnniRouteTnsProto value. If this information…	ObjectIdentifierr/w	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.15
pnniRouteTnsOperStatus Indicates whether the reachable transit network is operationally valid and whether it is being advertised by this node.	Enumeration Enumerated Values: 1 inactive 2 active 3 advertised	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.16
pnniRouteTnsTimeStamp Indicates how long the connectivity from the advertising node to the reachable transit network has been known to the local node.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.17
pnniRouteTnsRowStatus To create, delete, activate and de-activate a reachable transit network.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.353.5.4.1.1.19.5.1.18

A list of the summary address prefixes that may be 
advertised by the specified logical PNNI entity.

pnniSummaryAddressEntry row .1.3.6.1.4.1.353.5.4.1.1.20.1

An entry in the table, containing summary address prefix
information in this switching system.

Indexes

pnniNodeIndex pnniSummaryAddressType pnniSummaryAddressAddress pnniSummaryAddressPrefixLength

Column	Syntax	OID
pnniSummaryAddressType The type (e.g. internal or exterior) of summary being described.	Enumeration Enumerated Values: 1 internal 2 exterior	.1.3.6.1.4.1.353.5.4.1.1.20.1.1
pnniSummaryAddressAddress The ATM End System Address prefix for the summary.	AtmAddrPrefix Type Constraints: range: 19	.1.3.6.1.4.1.353.5.4.1.1.20.1.2
pnniSummaryAddressPrefixLength The prefix length for the summary.	PnniPrefixLength Type Constraints: range: 0..152	.1.3.6.1.4.1.353.5.4.1.1.20.1.3
pnniSummaryAddressSuppress Determines what is done with addresses that are being summarized by the instance. The default value (e.g. false) will indicate that the summary should propagate into the peer group. Network Management will be able to se…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.353.5.4.1.1.20.1.4
pnniSummaryAddressState Indicates whether the summary is currently being advertised by the node within the local switching system into its peer group.	Enumeration Enumerated Values: 1 advertising 2 suppressing 3 inactive	.1.3.6.1.4.1.353.5.4.1.1.20.1.5
pnniSummaryAddressRowStatus To create, delete, activate and de-activate a summary.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.353.5.4.1.1.20.1.6