PDN-XDSL-INTERFACE-MIB Table View

The xdslDevGenericIfConfigTable provides config information 
          
generic to a xDSL device, or system. The table is indexed by an 
          
object which corresponds to ifIndex. These ifIndex entries, 
          
themselves, denote and identify specific xdsl interfaces on
          
the board or module. Also the configuration parameters are
          
grouped into two broad categories, 'up' and 'down'. 'up'
          
reflects the upstream direction (from the customer premises
          
to the central office). 'Down' reflects the downstream
          
direction (from the central office to the customer premises)

xdslDevGenericIfConfigEntry row .1.3.6.1.4.1.1795.2.24.9.2.1.1.1

Describes a specific xDSL interface entry.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
xdslDevGenericIfConfigPortSpeedBehaviourmandatory The value of this object corresponds to the behaviour of the specified port. The default value for this object is fixed (1).	Enumerationr/w Enumerated Values: 1 fixed 2 adaptive	.1.3.6.1.4.1.1795.2.24.9.2.1.1.1.1
xdslDevGenericIfConfigMarginThresholdmandatory The value of this object corresponds to the offset from the startup margin. The threshold margin is calculated by subtracting the offset from the startup margin. Permissible…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.1.1.1.2
xdslDevGenericIfConfigPortIDmandatory The value of this object corresponds to 40 character information only field that identifies what the DSL port is connected to (Circuit ID, MDF location, Customer name, etc.)	OctetStringr/w Constraints: range: 1-40	.1.3.6.1.4.1.1795.2.24.9.2.1.1.1.3
xdslDevGenericIfConfigLinkUpDownTransitionThresholdmandatory The value of this object corresponds to the threshold value for link up-down transitions. If link up-down's exceed this threshold value a xdslLinkupDownTransitions trap is ge…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.1.1.1.4
xdslDevGenericIfConfigLineEncodeTypemandatory The value of this object corresponds to the line encoding technology used for data transmission over the the dsl link.	Enumeration Enumerated Values: 1 other 2 cap 3 twoB1q 4 mvl 5 g-lite 6 dmt	.1.3.6.1.4.1.1795.2.24.9.2.1.1.1.5
xdslDevGenericIfConfigLineRateModemandatory The value of this object is used to choose the line rate list for data transmission over the dsl link. The default value is standard(1).	Enumerationr/w Enumerated Values: 1 standard 2 nx128	.1.3.6.1.4.1.1795.2.24.9.2.1.1.1.6
xdslDevGenericIfConfigLinkEncapTypemandatory The value of this object corresponds to the link encapsulation type. Following are valid settings: linkNone (1) ethernet (2) ppp (3) …	Enumerationr/w Enumerated Values: 1 linkNone 2 ethernet 3 ppp 4 slip 5 frameRelay-PLL 6 x23PVC 7 x25SVC 8 hdlc 9 etherHDLC 10 rfc1483-MPOA 11 funi-MPOA 12 frf5 13 frf8 14 pppoAVC-Mux 15 pppoALLC	.1.3.6.1.4.1.1795.2.24.9.2.1.1.1.7
xdslDevGenericIfConfigSnTypemandatory The value of this object is used to choose a valid Service Node Type to be configured in the port. The configurable values are the object identifiers of the remote endpoints…	ObjectIdentifierr/w	.1.3.6.1.4.1.1795.2.24.9.2.1.1.1.8

The xdslDevRADSLSpecificIfConfigTable provides config information
          
specific to a xDSL device, or system. The table is indexed by
          
an object which corresponds to ifIndex. These ifIndex entries, 
          
themselves, denote and identify specific xdsl interfaces on
          
the board or module. Also the configuration parameters are
          
grouped into two broad categories, 'up' and 'down'. 'up'
          
reflects the upstream direction (from the customer premises
          
to the central office). 'Down' reflects the downstream
          
direction (from the central office to the customer premises)

xdslDevRADSLSpecificIfConfigEntry row .1.3.6.1.4.1.1795.2.24.9.2.2.1.1

Describes a specific xDSL interface entry.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
xdslDevRADSLSpecificIfConfigUpFixedPortSpeedmandatory The value of this object corresponds to the upstream speed of the specified port for fixed port speed behaviour. All the speeds are in kbps. If the port speed behaviour is ad…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.2.1.1.1
xdslDevRADSLSpecificIfConfigDownFixedPortSpeedmandatory The value of this object corresponds to the downstream speed of the specified port for fixed port speed behaviour. All the speeds are in kbps. If the port speed behaviour is…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.2.1.1.2
xdslDevRADSLSpecificIfConfigUpAdaptiveUpperBoundPortSpeedmandatory The value of this object corresponds to the upper bound for the upstream port speed of the specified port for adaptive port speed behaviour. The speeds are measured in kbps.…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.2.1.1.3
xdslDevRADSLSpecificIfConfigUpAdaptiveLowerBoundPortSpeedmandatory The value of this object corresponds to the lower bound for the upstream port speed of the specified port for adaptive port speed behaviour in kbps. If the port speed behavi…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.2.1.1.4
xdslDevRADSLSpecificIfConfigDownAdaptiveUpperBoundPortSpeedmandatory The value of this object corresponds to the upper bound allowed for the downstream port speed of the specified port for adaptive port speed behaviour. The speeds are measu…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.2.1.1.5
xdslDevRADSLSpecificIfConfigDownAdaptiveLowerBoundPortSpeedmandatory The value of this object corresponds to the Minimum lower bound allowed for the downstream port speed of the specified port for adaptive port speed behaviour. If the port sp…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.2.1.1.6
xdslDevRADSLSpecificIfConfigReedSolomonDownFwdErrCorrectionmandatory The value of this object corresponds to the Reed-Solomon forward error correction in the downstream direction. The default value of this object should be minimizeError (1).	Enumerationr/w Enumerated Values: 1 minimizeError 2 minimizeDelay 3 reedSolomonNotSupported	.1.3.6.1.4.1.1795.2.24.9.2.2.1.1.7
xdslDevRADSLSpecificIfConfigStartUpMarginmandatory The value of this object corresponds to the startup value of the margin for a DSL interface (specified by ifIndex). The unit is db (decibels. The higher the margin the better …	Integer32r/w Constraints: range: -3-9	.1.3.6.1.4.1.1795.2.24.9.2.2.1.1.8
xdslDevRADSLSpecificIfConfigTxPowerAttenuationmandatory This value corresponds to the Transmitt Power Attenuation in dB for the access node. This value represents the downstream power level in dB. Permissible values are -6, -3 and 0. …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.2.1.1.9
xdslDevRADSLSpecificIfConfigSnTxPowerAttenuationmandatory This value corresponds to the Transmitt Power Attenuation in dB for the service node. This value represents the upstream power level in dB. Permissible values are -9, -6, -3 and 0. The …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.2.1.1.10

The xdslDevMVLSpecificIfConfigTable provides config information specific 
          
to a xDSL(MVL) device, or system. The table is indexed by an 
          
object which corresponds to ifIndex. These ifIndex entries, 
          
themselves, denote and identify specific xdsl(Mvl) interfaces on
          
the board or module.

xdslDevMVLSpecificIfConfigEntry row .1.3.6.1.4.1.1795.2.24.9.2.3.1.1

Describes a specific xDSL(MVL) interface entry.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
xdslDevMVLSpecificIfConfigMaxPortSpeedobsolete The value of this object corresponds to the upper bound port speed of the specified port. The speeds are measured in kbps. Prior to GrandSlam 2.3, this object was used for …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.3.1.1.1
xdslDevMVLSpecificIfConfigOnHookTxPowerAttenuationmandatory This value corresponds to the On-hook Transmitt Power Attenuation in dB for the access node and the service node. This value represents both downstream and upstream power level in dB while…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.3.1.1.2
xdslDevMVLSpecificIfConfigOffHookTxPowerAttenuationmandatory This value corresponds to the Off-hook Transmitt Power Attenuation in dB for the access node and the service node. This value represents both downstream and upstream power level in dB whil…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.3.1.1.3
xdslDevMVLSpecificIfConfigOnHookPCVoltageDropThresholdValuemandatory This value correspond to the portcard Voltage Drop Threshold Value and valid settings are 0 and 6. If the corresponding value at the endpoint is set for Max (255) than only v…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.3.1.1.4
xdslDevMVLSpecificIfConfigOnHookSNVoltageDropThresholdValuemandatory This corresponds to the endpoint Voltage Drop Threshold Value and valid settings are 17, 34 and 255(Max). If Reach is used than only valid value is 34 - default.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.3.1.1.5
xdslDevMVLSpecificIfConfigMaxDownStreamPortSpeedmandatory The value of this object corresponds to the upper bound downstream port speed of the specified port. The speeds are measured in kbps. Setting the value of this object will a…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.3.1.1.6
xdslDevMVLSpecificIfConfigMaxUpStreamPortSpeedmandatory The value of this object corresponds to the upper bound upstream port speed of the specified port. The speeds are measured in kbps. Prior to GrandSlam 2.3, the object MaxPor…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.3.1.1.7

The xdslDevSDSLSpecificIfConfigTable provides configuration 
          
specific to the SDSL link.

xdslDevSDSLSpecificIfConfigEntry row .1.3.6.1.4.1.1795.2.24.9.2.4.1.1

Describes a specific SDSL configuration entry.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
xdslDevSDSLSpecificIfConfigFixedPortSpeedmandatory The value of this object corresponds to both upstream and downstream speed of the specified port. All the speeds are in kbps. The value of this object is used only when the …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.4.1.1.1
xdslDevSDSLSpecificIfConfigMaxPortSpeedmandatory The value of this object corresponds to the upper bound port speed of the specified port when the port behaviour is adaptive. The speeds are measured in kbps.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.4.1.1.2
xdslDevSDSLSpecificIfConfigFixedPortSpeedNx128Modemandatory The value of this object applies to both upstream and downstream speed of the specified port when the line rate mode is configured as Nx128 mode. All the speeds are in kbps…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.1795.2.24.9.2.4.1.1.3
xdslDevSDSLSpecificIfConfigMaxPortSpeedNx128Modemandatory The value of this object corresponds to the upper bound port speed of the specified port when the port behaviour is adaptive and the line rate is Nx128 mode, and doesn't take…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.1795.2.24.9.2.4.1.1.4
xdslDevSDSLSpecificIfConfigMinSnrMarginmandatory Configured Minimum acceptable Signal/Noise Margin.	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.1795.2.24.9.2.4.1.1.5
xdslDevSDSLSpecificIfConfigTargetSnrMarginmandatory Configured Target Signal/Noise Margin.	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.1795.2.24.9.2.4.1.1.6

The xdslDevIDSLSpecificIfConfigTable provides configuration 
          
specific to the IDSL link.

xdslDevIDSLSpecificIfConfigEntry row .1.3.6.1.4.1.1795.2.24.9.2.5.1.1

Describes a specific IDSL configuration entry.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
xdslDevIDSLSpecificIfConfigPortSpeedmandatory The value of this object corresponds to both upstream and downstream speed of the specified port. All the speeds are in kbps. Allowed speeds are 64, 128 and 144 kbps. The def…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1795.2.24.9.2.5.1.1.1
xdslDevIDSLSpecificIfConfigTimingPortTransceiverModemandatory The transceiver mode selected on the timing source port. Only one IDSL port can be set to NT mode. This timing will then be distributed to all other IDSL ports in the chassis…	Enumerationr/w Enumerated Values: 1 networkTiming 2 localTiming	.1.3.6.1.4.1.1795.2.24.9.2.5.1.1.2
xdslDevIDSLSpecificChannelmandatory The channel type for 64 Kbps. Default value is B1.	Enumerationr/w Enumerated Values: 1 b1 2 b2 3 noOp	.1.3.6.1.4.1.1795.2.24.9.2.5.1.1.3