PDN-DSL-ATM-BOND-MIB Table View

The DSL ATM Bond Group Table.  
Contains configuration and operational information 
relative to a particular bonding group.

pdnDslAtmBondGroupEntry row .1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1

An entry in the DSL ATM Bond Group Table.
Each entry represents a particular bonding group.

Indexes

pdnDslAtmBondGroupIndex

Column	Syntax	OID
pdnDslAtmBondGroupIndex A unique identifier for a bonding group. This is not the same value as an ifIndex for the group. The pdnDslAtmBondGroupIfIndex object contains the bonding group's ifIndex.	PdnDslAtmBondGroupIndexTC Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.1
pdnDslAtmBondGroupRowStatus This object allows create, change, and delete operations on the table. The delete operation can only occur when the pdnDslAtmBondGroupNbrRefs is 0 meaning that there are no DSL interfaces and bearers that are bonded t…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.2
pdnDslAtmBondGroupNbrRefs The number of DSL interface / bearer combinations that are members of this group. This is the number of entries in the pdnDslAtmBondMappingTable that have their pdnDslAtmBondMappingGroupIndex assigned to this value of…	Unsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.3
pdnDslAtmBondGroupIfIndex Identifies the interface number assigned to this bonding group and is used to identify corresponding rows in the interfaces MIB.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.4
pdnDslAtmBondGroupID An identifier to uniquely identify the bonding group. This ID one of the fields of the Autonomous Status Message and may be useful in some debugging situations.	PdnDslAtmBondGroupIdentityTCr/w Type Constraints: range: 1..65535	.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.5
pdnDslAtmBondGroupAlarmConfProfileName Identifies the Alarm Profile this group is associated with which is an entry in the pdnDslAtmBondAlarmConfProfileTable. If this object is not a zero-length string, it should default to the default profile whose name …	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.6
pdnDslAtmBondGroupAtucMaxNetDataRate The maximum net data rate this bonding group is allowed to achieve in the downstream direction.	bpsPdnDslAtmBondGroupDataRateTCr/w Type Constraints: range: -1..2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.7
pdnDslAtmBondGroupAturMaxNetDataRate The maximum net data rate this bonding group is allowed to achieve in the upstream direction.	bpsPdnDslAtmBondGroupDataRateTCr/w Type Constraints: range: -1..2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.8
pdnDslAtmBondGroupAtucMinNetDataRate The minimum net data rate this bonding group is allowed to achieve in the downstream direction.	bpsPdnDslAtmBondGroupDataRateTCr/w Type Constraints: range: -1..2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.9
pdnDslAtmBondGroupAturMinNetDataRate The minimum net data rate this bonding group is allowed to achieve in the upstream direction.	bpsPdnDslAtmBondGroupDataRateTCr/w Type Constraints: range: -1..2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.10
pdnDslAtmBondGroupAtucDiffDelay The maximum differential delay tolerance among member links in this bonding group in the downstream direction.	millisecondsPdnDslAtmBondGroupDiffDelayTolTCr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.11
pdnDslAtmBondGroupAturDiffDelay The maximum differential delay tolerance among member links in this bonding group in the upstream direction.	millisecondsPdnDslAtmBondGroupDiffDelayTolTCr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.12
pdnDslAtmBondGroupStatusNotifyEnabled Specifies whether or not the pdnDslAtmBondGroupStatusChange notification will be generated. When set to true(1), the notification will be generated when the pdnDslAtmBondPerfGroupStatus changes. When set to false(2)…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.13

The DSL ATM Bond Mapping Table. 
This table is used to map a DSL port and a bearer 
number to a bonding group.

pdnDslAtmBondMappingEntry row .1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1

An entry in the DSL ATM Bond Mapping Table.
Each entry represents a DSL interface and a a
bearer number.

Indexes

pdnDslAtmBondDslIfIndex pdnDslAtmBondBearerNbr

Column	Syntax	OID
pdnDslAtmBondDslIfIndex Identifies the DSL interface of a link that is to be bonded to the group.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.1
pdnDslAtmBondBearerNbr Identifies the bearer number of a link for the DSL line to be bonded to the group.	PdnDslAtmBondGroupBearerNumberTC Type Constraints: range: 1..4	.1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.2
pdnDslAtmBondMappingRowStatus This object allows create, change, and delete operations on the table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.3
pdnDslAtmBondMappingGroupIndex The pdnDslAtmBondGroupIndex which identifies the group to which the DSL line and bearer number, which form a link, are to be bound to.	PdnDslAtmBondGroupIndexTCr/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.4

The DSL ATM Bond Group Index Mapping Table.
This table identifies the mapping from the bonding
group's ifIndex to the bonding group's index.

pdnDslAtmBondGroupIndexMappingEntry row .1.3.6.1.4.1.1795.2.24.2.6.33.1.5.1

An entry in the DSL ATM Bond Group Index Mapping Table.
Each entry represents an ifIndex for a bonding group.

Indexes

pdnDslAtmBondGroupIfIndex

Column	Syntax	OID
pdnDslAtmBondGroupIndexMappingIndex The pdnDslAtmBondGroupIndex this group ifIndex entry maps to.	PdnDslAtmBondGroupIndexTC Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.5.1.1

The DSL ATM Bond Group Inverse Mapping Table.
This table identifies the mapping from a bonding
group's index and a DSL interface to a bearer.
This object provides a a mechanism to list bonding
groups from a group's index.

pdnDslAtmBondGroupInvMappingEntry row .1.3.6.1.4.1.1795.2.24.2.6.33.1.6.1

An entry in the DSL ATM Bond Inverse Mapping Table.
Each entry represents a particular bonding group and a
particular DSL interface.

Indexes

pdnDslAtmBondGroupIndex pdnDslAtmBondDslIfIndex

Column	Syntax	OID
pdnDslAtmBondInvMappingBearerNbr The bearer on a particular DSL interface that is a member of the bonding group.	PdnDslAtmBondGroupBearerNumberTC Type Constraints: range: 1..4	.1.3.6.1.4.1.1795.2.24.2.6.33.1.6.1.1

The DSL ATM Bond Current Table.
This table contains the status and performance 
information for bonding groups.

pdnDslAtmBondPerfEntry row .1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1

An entry in the DSL ATM Bond Performance Table.
Each entry represents a particular bonding group.

Indexes

pdnDslAtmBondGroupIndex

Column	Syntax	OID
pdnDslAtmBondPerfCurrAtucNetDataRate The current net data rate the bonding group has achieved for the downstream direction.	bpsPdnDslAtmBondGroupDataRateTC Type Constraints: range: -1..2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.1
pdnDslAtmBondPerfCurrAturNetDataRate The current net data rate the bonding group has achieved for the upstream direction.	bpsPdnDslAtmBondGroupDataRateTC Type Constraints: range: -1..2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.2
pdnDslAtmBondPerfPrevAtucNetDataRate The previous net data rate the bonding group had achieved for the downstream direction. This value is set at initialization to prevent a notification from being sent.	bpsPdnDslAtmBondGroupDataRateTC Type Constraints: range: -1..2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.3
pdnDslAtmBondPerfPrevAturNetDataRate The previous net data rate the bonding group had achieved for the upstream direction. This value is set at initialization to prevent a notification from being sent.	bpsPdnDslAtmBondGroupDataRateTC Type Constraints: range: -1..2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.4
pdnDslAtmBondPerfGroupStatus The status of the bonding group.	PdnDslAtmBondGroupStatusTC Type Values: 1 operational 2 unavailable	.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.5
pdnDslAtmBondPerfFailReason The reason the operational status of the bonding group is not `operational'.	PdnDslAtmBondGroupFailReasonTC Type Values: 1 notApplicable 2 unknown 3 atucMinDataRateNotMet 4 aturMinDataRateNotMet 5 atucDiffDelayExceeded 6 aturDiffDelayExceeded	.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.6
pdnDslAtmBondPerfFailCount A count of the number of times the group was declared `unavailable` since last restart.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.7
pdnDslAtmBondPerfRunTime The total accumulated time the bonding group was in the `normal' operational status since last restart.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.8
pdnDslAtmBondPerfUAS The total accumulated time the bonding group was unavailable since last restart.	secondsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.9
pdnDslAtmBondPerfAtucRxCellLoss The total number of cells that are lost at the aggregation output in the upstream direction from the bonding group since last restart.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.10
pdnDslAtmBondPerfAturRxCellLoss The total number of cells that are lost at the aggregation output in the downstream direction from a bonding group since last restart.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.11

The DSL ATM Bond 15-Minute Interval Table.
This table contains the status and performance 
information for bonding groups collected in
 15-minute intervals.

pdnDslAtmBond15MinIntervalEntry row .1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1

An entry in the DSL ATM Bond 15-Minute Interval Table.
Each entry represents a particular bonding group and a
particular 15-minute interval.

Indexes

pdnDslAtmBondGroupIndex pdnDslAtmBond15MinIntervalNumber

Column	Syntax	OID
pdnDslAtmBond15MinIntervalNumber Performance Data Interval number. Interval 1 is the most recent previous 15-minute interval; interval 96 is 24 hours ago. Intervals 2..96 are optional.	Unsigned32 Constraints: range: 1-96	.1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.1
pdnDslAtmBond15MinIntervalStartDateAndTime Provides a date-time indication of when the interval started.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.2
pdnDslAtmBond15MinIntervalFailCount A count of the number of times the group was declared `unavailable` during the interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.3
pdnDslAtmBond15MinIntervalRunTime The accumulated time the bonding group was in the `normal' operational status during the interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.4
pdnDslAtmBond15MinIntervalUAS The accumulated time the bonding group was unavailable during the interval,	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.5
pdnDslAtmBond15MinIntervalAtucRxCellLoss The number of cells that are lost at the aggregation output in the upstream direction from the bonding group during the interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.6
pdnDslAtmBond15MinIntervalAturRxCellLoss The number of cells that are lost at the aggregation output in the downstream direction from the bonding group during the interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.7

The DSL ATM Bond 1-Day Interval Table.
This table contains the status and performance 
information for bonding groups collected in
 1-Day intervals.

pdnDslAtmBond1DayIntervalEntry row .1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1

An entry in the DSL ATM Bond 1-Day Interval Table.
Each entry represents a particular bonding group and a
particular 1-day interval.

Indexes

pdnDslAtmBondGroupIndex pdnDslAtmBond1DayIntervalNumber

Column	Syntax	OID
pdnDslAtmBond1DayIntervalNumber Performance Data Interval number. Interval 1 is the most recent previous 1-day interval; interval 30 is 30 days ago. Intervals 2..30 are optional.	Unsigned32 Constraints: range: 1-30	.1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.1
pdnDslAtmBond1DayIntervalStartDateAndTime Provides a date-time indication of when the interval started.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.2
pdnDslAtmBond1DayIntervalFailCount A count of the number of times the group was declared `unavailable` during the interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.3
pdnDslAtmBond1DayIntervalRunTime The accumulated time the bonding group was in the `normal' operational status during the interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.4
pdnDslAtmBond1DayIntervalUAS The accumulated time the bonding group was unavailable during the interval,	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.5
pdnDslAtmBond1DayIntervalAtucRxCellLoss The number of cells that are lost at the aggregation output in the upstream direction from a bonding group during the interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.6
pdnDslAtmBond1DayIntervalAturRxCellLoss The number of cells that are lost at the aggregation output in the downstream direction from the bonding group during the interval.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.7

The DSL ATM Bond Link Table.
This table contains the current status information for
a link in a bonding group.

pdnDslAtmBondLinkEntry row .1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1

An entry in the DSL ATM Bond Link Table.
each entry represents a DSL interface on a particular
bonding group.

Indexes

pdnDslAtmBondGroupIndex pdnDslAtmBondDslIfIndex

Column	Syntax	OID
pdnDslAtmBondLinkAtucRxLinkStatus The status of the Rx link in a bonded group in the upstream direction.	PdnDslAtmBondLinkStatusAsmTC Type Values: 1 notProvisioned 2 shouldNotBeUsed 3 acceptableToCarryBondedTraffic 4 selectedToCarryBondedTraffic	.1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.1
pdnDslAtmBondLinkAturRxLinkStatus The status of the Rx link in a bonded group in the downstream direction.	PdnDslAtmBondLinkStatusAsmTC Type Values: 1 notProvisioned 2 shouldNotBeUsed 3 acceptableToCarryBondedTraffic 4 selectedToCarryBondedTraffic	.1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.2
pdnDslAtmBondLinkAtucTxLinkStatus The status of the Tx link in a bonded group in the downstream direction.	PdnDslAtmBondLinkStatusAsmTC Type Values: 1 notProvisioned 2 shouldNotBeUsed 3 acceptableToCarryBondedTraffic 4 selectedToCarryBondedTraffic	.1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.3
pdnDslAtmBondLinkAturTxLinkStatus The status of the Rx link in a bonded group in the upstream direction.	PdnDslAtmBondLinkStatusAsmTC Type Values: 1 notProvisioned 2 shouldNotBeUsed 3 acceptableToCarryBondedTraffic 4 selectedToCarryBondedTraffic	.1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.4
pdnDslAtmBondLinkAtucAsmRxStatus The status of ASMs received for the link in a bonded in the upstream direction.	PdnDslAtmBondAsmRxStatusTC Type Values: 1 receivedASM 2 notReceivedASM	.1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.5
pdnDslAtmBondLinkAturAsmRxStatus The status of ASMs received for the link in a bonded in the downstream direction.	PdnDslAtmBondAsmRxStatusTC Type Values: 1 receivedASM 2 notReceivedASM	.1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.6

The DSL ATM Bond Alarm Configuration Profile Table.
This table contains the alarm configuration profiles
for DSL ATM Bonding.

pdnDslAtmBondAlarmConfProfileEntry row .1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1

An entry in the DSL ATM Bond Alarm Configuration
Profile Table. Each entry represents a single alarm
configuration profile. Profiles may be created/deleted
using the RowStatus mechanism not including the default
pro…

Indexes

pdnDslAtmBondAlarmConfProfileName

Column	Syntax	OID
pdnDslAtmBondAlarmConfProfileName This object is the index for the table and identifies a unique row in the table. A default profile with an index of `DEFVAL' will always exist and its parameters will be set to implementation-specific values.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.1
pdnDslAtmBondAlarmConfRowStatus This object allows profiles to be created to deleted. The delete operation can only occur when the pdnDslAtmBondAlarmConfNbrRefs is 0 meaning that there are no entries in the pdnDslAtmBondGroupTable that reference this…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.2
pdnDslAtmBondAlarmConfNbrRefs The number of entries in the pdnDslAtmBondGroupTable that reference this profile.	Unsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.3
pdnDslAtmBondAlarmConfAtucThreshRateUp Configured change in rate, in bps, causing a pdnDslAtmBondAtucRateChange notification. The notification is produced when current rate >= previous rate plus the value of this object. A value of `0' will disable the …	bpsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.4
pdnDslAtmBondAlarmConfAturThreshRateUp Configured change in rate, in bps, causing a pdnDslAtmBondAturRateChange notification. The notification is produced when current rate >= previous rate plus the value of this object. A value of `0' will disable the …	bpsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.5
pdnDslAtmBondAlarmConfAtucThreshRateDown Configured change in rate, in bps, causing a pdnDslAtmBondAtucRateChange notification. The notification is produced when current rate <= previous rate minus the value of this object. A value of `0' will disable the…	bpsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.6
pdnDslAtmBondAlarmConfAturThreshRateDown Configured change in rate, in bps, causing a pdnDslAtmBondAturRateChange notification. The notification is produced when current rate <= previous rate minus the value of this object. A value of `0' will disable the…	bpsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.7