PDN-DSL-ATM-BOND-MIB
This MIB module defines a collection of objects for managing
the bonding of multiple digital subscriber lines (DSL) to
transport ATM streams.
At the time this modules was defined, neither the IETF nor the
ATM Forum had any indication of plans to produce MIB modules
to support the bonding of multiple digital subscriber lines to
transport ATM streams. As a result, these objects may be a
`temporary' solution should a standards body produces a module
to support this type of bonding.
The following documents are informational references with
respect to this MIB module:
[G.998.1] ITU-T G.998.1, `ATM-based Multi-Pair Bonding',
January 2005.
[RFC 2494] Fowler, D., `Definitions of Managed Objects for the
DS0 and DS0 Bundle Interface type', January 1999.
[T1E1.4] ANSI T1E1.4/2003-334R6, American National Standards
Institute (ANSI), `Draft proposed American National
Standard, ATM-based multi-pair bonding', October 2004.
[TR-090] Abbi, R., DSL Forum Technical Report Technical Report
TR-090, `Protocol Independent Object Model for
Managing Next Generation ADSL Technologies',
December 2004.
=================================================================
== ==
== Copyright (C) 2005 Paradyne Networks, Inc. ==
== ==
=================================================================
- Source file
PDN-DSL-ATM-BOND-MIB- Last revised
- Identity
pdnDslAtmBondMIB- Base OID
1.3.6.1.4.1.1795.2.24.2.6.33
Imported Objects
| IF-MIB | InterfaceIndex |
| PDN-HEADER-MIB | pdn-interfaces |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | DateAndTime RowStatus TestAndIncr TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the paradyne MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'PDN-DSL-ATM-BOND-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'PDN-DSL-ATM-BOND-MIB::pdnDslAtmBondMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'PDN-DSL-ATM-BOND-MIB' -M '/opt/observium/mibs/paradyne:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'PDN-DSL-ATM-BOND-MIB::pdnDslAtmBondMIB'
Objects (87)
Showing 87 of 87 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.1795.2.24.2.6.33 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.0 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.10 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.2 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.3 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.4 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.5 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.10.1.6 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.11 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1 |
||
|
OctetString
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.1 |
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.2 |
||
|
Unsigned32
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.3 |
|
|
bpsInteger32
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.4 |
|
|
bpsInteger32
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.5 |
|
|
bpsInteger32
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.6 |
|
|
bpsInteger32
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.11.1.7 |
|
|
Unsigned32
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.2 |
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.3 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.10 |
||
|
millisecondsPdnDslAtmBondGroupDiffDelayTolTC
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.11 |
|
|
millisecondsPdnDslAtmBondGroupDiffDelayTolTC
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.12 |
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.13 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.2 |
||
|
Unsigned32
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.3 |
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.4 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.5 |
||
|
OctetString
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.6 |
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.7 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.8 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.3.1.9 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.4 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.2 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.3 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.4.1.4 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.5 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.5.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.5.1.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.6 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.6.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.6.1.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.7 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.10 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.11 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.2 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.3 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.4 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.5 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.6 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.7 |
||
|
secondsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.8 |
|
|
secondsSNMPv2-SMICounter32
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.7.1.9 |
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.8 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.1 |
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.2 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.3 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.4 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.5 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.6 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.8.1.7 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.9 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.1 |
|
.1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.2 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.3 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.4 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.5 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.6 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.1.9.1.7 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.2 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.3 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.3.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.2 |
||
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.3 |
Dependencies (9) 6 direct · 3 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- RFC1155-SMIrfc
- PDN-HEADER-MIBparadyne
- SNMP-FRAMEWORK-MIBrfc
- PDN-DSL-ATM-BOND-MIBparadyneselected
Type Definitions (9)
| Enumeration |
receivedASM(1)notReceivedASM(2) |
|
| Unsigned32 |
range: 1..4 |
|
| Integer32 |
range: -1..2147483647 |
|
| Unsigned32 |
range: 0..2147483647 |
|
| Enumeration |
notApplicable(1)unknown(2)atucMinDataRateNotMet(3)aturMinDataRateNotMet(4)atucDiffDelayExceeded(5)aturDiffDelayExceeded(6) |
|
| Unsigned32 |
range: 1..65535 |
|
| Integer32 |
range: 0..2147483647 |
|
| Enumeration |
operational(1)unavailable(2) |
|
| Enumeration |
notProvisioned(1)shouldNotBeUsed(2)acceptableToCarryBondedTraffic(3)selectedToCarryBondedTraffic(4) |
Conformance Groups (22)
|
pdnDslAtmBondNextGroupIndex pdnDslAtmBondNbrOfGroups pdnDslAtmBondGroupRowStatus pdnDslAtmBondGroupNbrRefs pdnDslAtmBondGroupIfIndex pdnDslAtmBondGroupID
General configuration/definition of a bonding group.
|
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.1
|
|
|
Configuration of the maximum net data rate a bonding
group is allowed to achieve. |
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.2
|
|
|
Configuration of the minimum net data rate a bonding
group is allowed to achieve. |
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.3
|
|
|
Configuration of maximum differential delay among
member links in a bonding group. |
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.4
|
|
|
Configuration of notifications for changes to the
status of a bonding group. |
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.5
|
|
|
Map a DSL interface and a bearer to a bonding group.
|
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.6
|
|
|
Map from a bonding group's ifIndex to the bonding
group's index. |
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.7
|
|
|
Map from a bonding group and a DSL interface to a
bearer. |
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.8
|
|
|
pdnDslAtmBondPerfCurrAtucNetDataRate pdnDslAtmBondPerfCurrAturNetDataRate pdnDslAtmBondPerfPrevAtucNetDataRate pdnDslAtmBondPerfPrevAturNetDataRate
Status of the net data rate the bonding group has
currently or had previously achieved. |
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.9
|
|
|
Current status of the bonding group.
|
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.10
|
|
|
Date-time stamp of when an interval started.
|
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.11
|
|
|
The tracking of time a bonding group is `operational'.
|
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.12
|
|
|
pdnDslAtmBondPerfAtucRxCellLoss pdnDslAtmBondPerfAturRxCellLoss pdnDslAtmBond15MinIntervalAtucRxCellLoss pdnDslAtmBond15MinIntervalAturRxCellLoss pdnDslAtmBond1DayIntervalAtucRxCellLoss pdnDslAtmBond1DayIntervalAturRxCellLoss
The tracking the total number of cells that are lost
at the aggregation output from a bonding group. |
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.13
|
|
|
The reason the operational status of the bonding group
is not `operational'. |
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.14
|
|
|
The number of times a bonding group was declared
`unavailable'. |
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.15
|
|
|
The time a bonding group was unavailable.
|
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.16
|
|
|
pdnDslAtmBondLinkAtucRxLinkStatus pdnDslAtmBondLinkAturRxLinkStatus pdnDslAtmBondLinkAtucTxLinkStatus pdnDslAtmBondLinkAturTxLinkStatus
Current status of the link in a bonded group with
respect to carrying bonded traffic. |
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.17
|
|
|
Status of the reception of ASMs for a link in a bonded
group. |
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.18
|
|
|
pdnDslAtmBondGroupAlarmConfProfileName pdnDslAtmBondAlarmConfRowStatus pdnDslAtmBondAlarmConfNbrRefs
Provides the ability to create or delete alarm
profiles. |
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.19
|
|
|
Provides the ability to configure thresholds for
rate changes in the downstream direction. |
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.20
|
|
|
Provides the ability to configure thresholds for
rate changes in the upstream direction. |
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.1.21
|
|
|
The collection of notifications for the MIB module.
|
.1.3.6.1.4.1.1795.2.24.2.6.33.3.2.3.1
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.1795.2.24.2.6.33.3.1.1The compliance statement for the entities which
implement the pdnDslAtmBondMIB.
implement the pdnDslAtmBondMIB.
Required groups
| mandatory | pdnDslAtmBondGroup | |
| mandatory | pdnDslAtmBondMappingGroup | |
| mandatory | pdnDslAtmBondPerfAggDataRateGroup | |
| mandatory | pdnDslAtmBondPerfBondGroupStatusGroup | |
| mandatory | pdnDslAtmBondNotificationsGroup | |
| optional | pdnDslAtmBondMaxRateGroup |
This group is only required for implementations that need to be able to configure the maximum net data rate a bonding group is allowed to achieve. |
| optional | pdnDslAtmBondMinRateGroup |
This group is only required for implementations that need to be able to configure the minimum net data rate a bonding group is allowed to achieve. |
| optional | pdnDslAtmBondDiffDelayGroup |
This group is only required for implementations that need to be able to configure the maximum differential delay tolerance among member links in a bonding group. |
| optional | pdnDslAtmBondGroupStatusNotifyEnabledGroup |
This group is only required for implementations that need to be able to configure whether or not notifications will be generated when the status of a particular bonding group changes. |
| optional | pdnDslAtmBondIndexMappingGroup |
This group is only required for implementations that require mapping from a group's ifIndex to the group's index. |
| optional | pdnDslAtmBondInvMappingGroup |
This group is only required for implementations that require inverse mapping support. |
| optional | pdnDslAtmBondDateAndTimeGroup |
This group is only required for implementations that require a date-time stamp for a particular entry in an interval table. |
| optional | pdnDslAtmBondRunTimeGroup |
This group is only required for implementations that require tracking of the time a bonding group is `operational'. |
| optional | pdnDslAtmBondRxCellLossGroup |
This group is only required for implementations that require tracking of the number of cells that are lost at the aggregation output from a bonding group. |
| optional | pdnDslAtmBondPerfFailReasonGroup |
This group is only required for implementations that require tracking of the reason a bonding group is failing to become `operational'. |
| optional | pdnDslAtmBondFailCountGroup |
This group is only required for implementations that require tracking of the number of times a bonding group was declared `unavailable'. |
| optional | pdnDslAtmBondUASGroup |
This group is only required for implementations that require tracking of the time the bonding group was unavailable. |
| optional | pdnDslAtmBondTrafficCapGroup |
This group is only required for implementations that require tracking of the current status of a link in a bonded group with respect to carrying bonded traffic. |
| optional | pdnDslATmBondAsmRxStatusGroup |
This group is only required for implementations that require the tracking of the status of reception of ASMs for a link in a bonded group. |
| optional | pdnDslAtmBondAlarmConfProfileGroup |
This group is only required for implementations that require the support for alarm profiles. |
| optional | pdnDslAtmBondAlarmConfAtucThreshRateGroup |
This group is only required for implementations that require thresholds for rate changes in the downstream direction. |
| optional | pdnDslAtmBondAlarmConfAturThreshRateGroup |
This group is only required for implementations that require thresholds for rate changes in the upstream direction. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| pdnDslAtmBondInvMappingBearerNbr | An implementation only has to support 1 bearer. |
Notifications / Traps (3)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.1795.2.24.2.6.33.0.1 |
The downstream transmit rate has changed.
|
|
.1.3.6.1.4.1.1795.2.24.2.6.33.0.2 |
The upstream transmit rate has changed.
|
|
.1.3.6.1.4.1.1795.2.24.2.6.33.0.3 |
The operational status of the group has changed.
|