NETGEAR-CAPTIVE-PORTAL-MIB Table View

A table of config parms for instances of captive portal.

cpCaptivePortalEntry row .1.3.6.1.4.1.4526.10.38.1.2.1.1

Captive Portal instance entry.

Indexes

cpCaptivePortalInstanceId

Column	Syntax	OID
cpCaptivePortalInstanceId The identifier associated with this instance of captive portal.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.10.38.1.2.1.1.1
cpCaptivePortalConfigName The name, in alpha-numeric characters, assigned to this captive portal configuration.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.4526.10.38.1.2.1.1.2
cpCaptivePortalAdminMode Enable or disable this instance of captive portal on the system.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.10.38.1.2.1.1.3
cpCaptivePortalProtocolMode The protocol mode to be used.	Enumerationr/w Enumerated Values: 0 https 1 http	.1.3.6.1.4.1.4526.10.38.1.2.1.1.4
cpCaptivePortalVerificationMode The type of user verification to perform.	Enumerationr/w Enumerated Values: 0 guest 1 local 2 radius	.1.3.6.1.4.1.4526.10.38.1.2.1.1.5
cpCaptivePortalUserGroup The group ID for this captive portal user database.	Unsigned32r/w Constraints: range: 1-10	.1.3.6.1.4.1.4526.10.38.1.2.1.1.6
cpCaptivePortalURLRedirectMode Whether the captive portal should redirect newly authenticated clients to the configured URL. If this mode is disabled, the default locale specific welcome page is used. If enabled, the client is redirected to a conf…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.10.38.1.2.1.1.7
cpCaptivePortalRedirectURL The URL to which the newly authenticated client is redirected if cpCaptivePortalURLRedirectMode is enabled.	OctetStringr/w Constraints: range: 0-256	.1.3.6.1.4.1.4526.10.38.1.2.1.1.8
cpCaptivePortalSessionTimeout The session timeout. After this limit has been reached the user will be disconnected. If this value is set to 0, no timeout is enforced. This value is represented in seconds.	Unsigned32r/w Constraints: range: 0-86400	.1.3.6.1.4.1.4526.10.38.1.2.1.1.9
cpCaptivePortalIdleTimeout The idle timeout of the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no timeout is enforced. This value is represented in seconds.	Unsigned32r/w Constraints: range: 0-900	.1.3.6.1.4.1.4526.10.38.1.2.1.1.10
cpCaptivePortalRadiusAuthServer The RADIUS authentication server name assigned to this captive portal configuration. RADIUS server name may only contain alphanumeric plus dash, underline, and space characters.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.4526.10.38.1.2.1.1.11
cpCaptivePortalMaxBandwidthUp The maximum bandwidth, in bytes per second, that a client can transmit traffic when using Captive Portal. This setting limits the bandwidth at which the client can send data into the network. If this value is set to 0…	Unsigned32r/w Constraints: range: 0-536870911	.1.3.6.1.4.1.4526.10.38.1.2.1.1.12
cpCaptivePortalMaxBandwidthDown The maximum bandwidth, in bytes per second, that a client can receive traffic when using Captive Portal. This setting limits the bandwidth at which the client can receive data from the network. If this value is set to…	Unsigned32r/w Constraints: range: 0-536870911	.1.3.6.1.4.1.4526.10.38.1.2.1.1.13
cpCaptivePortalMaxInputOctets The maximum input octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced. This value is represented in bytes.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.10.38.1.2.1.1.14
cpCaptivePortalMaxOutputOctets The maximum Output octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced. This value is represented in bytes.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.10.38.1.2.1.1.15
cpCaptivePortalMaxTotalOctets The maximum input/output octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced. This value is represented in by…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.10.38.1.2.1.1.16
cpCaptivePortalUserLogoutMode Provides the captive portal authenticated user the ability to logout of their session through the use of a logout page. The connection will be terminated as a result of submitting the logout request.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.10.38.1.2.1.1.17
cpCaptivePortalRowStatus The captive portal instance status. Supported values: active(1) - This status is displayed after a valid Captive Portal instance is created. createAndGo(4) - Set to this value to create a new Captiv…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.10.38.1.2.1.1.18

A table of group definitions for the local users. This database is 
used by captive portal instances and local users if the verification mode is set to LOCAL.

cpLocalUserGroupEntry row .1.3.6.1.4.1.4526.10.38.1.3.1.1

The user group entry.

Indexes

cpLocalUserGroupIndex

Column	Syntax	OID
cpLocalUserGroupIndex The user group entry index.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.4526.10.38.1.3.1.1.1
cpLocalUserGroupName The user group name, limited to alpha-numeric strings (including the '-' and '_' characters).	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.4526.10.38.1.3.1.1.2
cpLocalUserGroupRowStatus The user group entry status. Supported values: active(1) - This status is displayed after a valid user group is created. createAndGo(4) - Set to this value to create a new user group. destroy(6) …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.10.38.1.3.1.1.3

A table of user definitions for the local database. This database is 
used by a captive portal instance if its verification mode is set to LOCAL.

cpLocalUserEntry row .1.3.6.1.4.1.4526.10.38.1.3.2.1

The local user entry.

Indexes

cpLocalUserIndex

Column	Syntax	OID
cpLocalUserIndex The local user entry index.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.4526.10.38.1.3.2.1.1
cpLocalUserName The user name, limited to alpha-numeric strings (including the '-' and '_' characters).	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.4526.10.38.1.3.2.1.2
cpLocalUserPassword The user password. This object will return an empty string even if a password is set.	OctetStringr/w Constraints: range: 8-64	.1.3.6.1.4.1.4526.10.38.1.3.2.1.3
cpLocalUserSessionTimeout The session timeout in seconds. After this limit is reached, the user is disconnected. If this value is set to 0, the default value for the captive portal is used.	Unsigned32r/w Constraints: range: 0-86400	.1.3.6.1.4.1.4526.10.38.1.3.2.1.4
cpLocalUserIdleTimeout The idle timeout of the session in seconds. After this limit is reached, the user is disconnected. If this value is set to 0, the default value for the captive portal is used.	Unsigned32r/w Constraints: range: 0-900	.1.3.6.1.4.1.4526.10.38.1.3.2.1.5
cpLocalUserMaxBandwidthUp The maximum bandwidth, in bytes per second, that the user can transmit traffic when using Captive Portal. This setting limits the bandwidth at which the user can send data into the network. If this value is set to 0, …	Unsigned32r/w Constraints: range: 0-536870911	.1.3.6.1.4.1.4526.10.38.1.3.2.1.6
cpLocalUserMaxBandwidthDown The maximum bandwidth, in bytes per second, that the user can receive traffic when using Captive Portal. This setting limits the bandwidth at which the user can receive data from the network. If this value is set to 0…	Unsigned32r/w Constraints: range: 0-536870911	.1.3.6.1.4.1.4526.10.38.1.3.2.1.7
cpLocalUserMaxInputOctets The maximum input octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced. This value is represented in bytes.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.4526.10.38.1.3.2.1.8
cpLocalUserMaxOutputOctets The maximum Output octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced. This value is represented in bytes.	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.4526.10.38.1.3.2.1.9
cpLocalUserMaxTotalOctets The maximum input/output octets (bytes) allowed for the session. After this limit has been reached the user will be disconnected. If this value is set to 0, no rate limiting is enforced. This value is represented in by…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.4526.10.38.1.3.2.1.10
cpLocalUserRowStatus The user entry status. Supported values: active(1) - This status is displayed after a valid user is created. createAndGo(4) - Set to this value to create a new user. destroy(6) - Set to this val…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.10.38.1.3.2.1.11

The mapping of local user assignments to a user group.

cpLocalUserGroupAssociationEntry row .1.3.6.1.4.1.4526.10.38.1.3.3.1

The local user group association entry.

Indexes

cpLocalUserGroupAssociationUserIndex cpLocalUserGroupAssociationGroupIndex

Column	Syntax	OID
cpLocalUserGroupAssociationUserIndex The local user entry index associated with a user group.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.4526.10.38.1.3.3.1.1
cpLocalUserGroupAssociationGroupIndex The user group entry index associated with a local user.	Integer32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.4526.10.38.1.3.3.1.2
cpLocalUserGroupAssociationRowStatus The local user to user group association entry status. Supported values: active(1) - This status is displayed after a valid association between a local user and a user group is cre…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.10.38.1.3.3.1.3

The mapping of interface assignments to a captive portal instance.

cpInterfaceAssociationEntry row .1.3.6.1.4.1.4526.10.38.1.4.1.1

The Captive Portal interface association entry.

Indexes

cpIntfAssociationCPID cpIntfAssociationIfIndex

Column	Syntax	OID
cpIntfAssociationCPID The Captive Portal instance identifier associated with an interface.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.10.38.1.4.1.1.1
cpIntfAssociationIfIndex The interface ifIndex to which the Captive Portal instance is associated.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4526.10.38.1.4.1.1.2
cpIntfAssociationRowStatus The Captive Portal instance to interface association status. Supported values: active(1) - This status is displayed after a valid association between a Captive Portal instance and …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.10.38.1.4.1.1.3

This database is used to report status for a captive portal instance.

cpCaptivePortalInstanceStatusEntry row .1.3.6.1.4.1.4526.10.38.2.2.1.1

Captive portal instance status entry.

Indexes

cpCaptivePortalInstanceId

Column	Syntax	OID
cpCaptivePortalInstanceOperStatus Indication of the current operational state of the captive portal instance.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.10.38.2.2.1.1.1
cpCaptivePortalInstanceOperDisabledReason The reason the captive portal instance is not currently operational.	Enumeration Enumerated Values: 0 none 1 adminDisabled 2 noRadiusServer 3 noAccountingServer 4 noIntfAssociation 5 noActiveIntf 6 noValidCert	.1.3.6.1.4.1.4526.10.38.2.2.1.1.2
cpCaptivePortalInstanceBlockStatus Block or unblock the captive portal instance for authentications using the following values: blockPending(0) - Set to this value to block the captive portal instance for authentications. …	Enumerationr/w Enumerated Values: 0 blockPending 1 blocked 2 notBlockPending 3 notBlocked	.1.3.6.1.4.1.4526.10.38.2.2.1.1.3
cpCaptivePortalInstanceAuthUserCount The number of currently authenticated users for this captive portal.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.10.38.2.2.1.1.4

This database is used to report status for a captive portal instance interface.

cpCaptivePortalIntfStatusEntry row .1.3.6.1.4.1.4526.10.38.2.3.1.1

Captive portal instance interface status entry.

Indexes

cpCaptivePortalInstanceId cpCaptivePortalIntfIfIndex

Column	Syntax	OID
cpCaptivePortalIntfIfIndex The ifIndex of the interface associated with this entry.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4526.10.38.2.3.1.1.1
cpCaptivePortalIntfActivationStatus Indication of whether captive portal instance is active on the interface.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4526.10.38.2.3.1.1.2
cpCaptivePortalIntfActivationDisabledReason The reason for the captive portal instance interface not being currently active.	Enumeration Enumerated Values: 0 none 1 intfNotAttached 2 adminDisabled	.1.3.6.1.4.1.4526.10.38.2.3.1.1.3
cpCaptivePortalIntfBlockStatus Indication of whether the captive portal instance interface is currently blocked for authentications.	Enumeration Enumerated Values: 0 blocked 1 notBlocked	.1.3.6.1.4.1.4526.10.38.2.3.1.1.4
cpCaptivePortalIntfAuthUserCount The number of currently authenticated users for this captive portal instance interface.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.10.38.2.3.1.1.5

A table of definitions for interfaces that are captive portal capable. 
This table identifies services that are provided on this interface.

cpCaptivePortalIntfDatabaseEntry row .1.3.6.1.4.1.4526.10.38.2.4.1.1

Indexes

cpCaptivePortalIntfIfIndex

Column	Syntax	OID
cpCaptivePortalIntfCapabilities The bitmap value used to identify which capabilities are available on the interface.	CpCaptivePortalIntfCapabilitiesMap Type Values: 0 other 1 sessionTimeout 2 idleTimeout 3 maxBytesReceivedCounter 4 maxBytesTransmittedCounter 5 maxPacketsReceivedCounter 6 maxPacketsTransmittedCounter 7 clientRoaming	.1.3.6.1.4.1.4526.10.38.2.4.1.1.1

This database is used to report status of authenticated clients.

cpCaptivePortalClientStatusEntry row .1.3.6.1.4.1.4526.10.38.2.5.1.1

Captive portal client status entry.

Indexes

cpCaptivePortalClientMacAddress

Column	Syntax	OID
cpCaptivePortalClientMacAddress The MAC address of the workstation from which the client is authenticated.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.10.38.2.5.1.1.1
cpCaptivePortalClientIpAddress The IP address of the workstation from which the client is authenticated.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.10.38.2.5.1.1.2
cpCaptivePortalClientUserName User name (or Guest ID) of the connected client.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.4526.10.38.2.5.1.1.3
cpCaptivePortalClientProtocolMode Protocol mode used for the client authentication.	Enumeration Enumerated Values: 0 https 1 http	.1.3.6.1.4.1.4526.10.38.2.5.1.1.4
cpCaptivePortalClientVerificationMode Type of user verification performed for the client authentication.	Enumeration Enumerated Values: 0 guest 1 local 2 radius	.1.3.6.1.4.1.4526.10.38.2.5.1.1.5
cpCaptivePortalClientAssocIfIndex The interface on which the client was authenticated.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4526.10.38.2.5.1.1.6
cpCaptivePortalClientCPID The captive portal instance on which the client was authenticated.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4526.10.38.2.5.1.1.7
cpCaptivePortalClientSessionTime The time (in seconds) since the client was authenticated.	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.10.38.2.5.1.1.8
cpCaptivePortalClientSwitchMacAddress The MAC address of the switch to which the client is authenticated.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.10.38.2.5.1.1.9
cpCaptivePortalClientSwitchIpAddress The IP address of the switch to which the client is authenticated.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.4526.10.38.2.5.1.1.10
cpCaptivePortalClientSwitchType The switch (peer or local) to which the client is authenticated.	Enumeration Enumerated Values: 1 peer 2 local	.1.3.6.1.4.1.4526.10.38.2.5.1.1.11
cpCaptivePortalClientDeauthAction This is an action object. Setting this object to start will initiate the deauthentication of authenticated client. Read on this object will always return none.	Enumerationr/w Enumerated Values: 1 none 2 start	.1.3.6.1.4.1.4526.10.38.2.5.1.1.12

A table of statistics for each active session.

cpCaptivePortalClientStatisticsEntry row .1.3.6.1.4.1.4526.10.38.2.5.2.1

Captive portal client statistics entry.

Indexes

No indexes recorded

Column	Syntax	OID
cpCaptivePortalClientBytesReceived Number of bytes received by this client.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4526.10.38.2.5.2.1.1
cpCaptivePortalClientBytesTransmitted Number of bytes transmitted by this client.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4526.10.38.2.5.2.1.2
cpCaptivePortalClientPacketsReceived Number of packets received by this client.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4526.10.38.2.5.2.1.3
cpCaptivePortalClientPacketsTransmitted Number of packets transmitted by this client.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4526.10.38.2.5.2.1.4

This database is used to report clients associated with a
particular captive portal interface.

cpCaptivePortalIntfClientAssocEntry row .1.3.6.1.4.1.4526.10.38.2.6.1.1

Captive portal interface client status entry.

Indexes

cpCaptivePortalIntfClientIfIndex cpCaptivePortalIntfClientAssocMacAddress

Column	Syntax	OID
cpCaptivePortalIntfClientIfIndex The interface on which the client was authenticated.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4526.10.38.2.6.1.1.1
cpCaptivePortalIntfClientAssocMacAddress The MAC address of the workstation from which the client is authenticated.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.10.38.2.6.1.1.2
cpCaptivePortalIntfClientAssocRowStatus This specifies the row-status of this entry. For a valid entry, the row-status will return active(1). This is the only supported value.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.10.38.2.6.1.1.3

This database is used to report clients associated with a
particular captive portal instance.

cpCaptivePortalInstanceClientAssocEntry row .1.3.6.1.4.1.4526.10.38.2.7.1.1

Captive Portal instance client status entry.

Indexes

cpCaptivePortalInstanceClientAssocInstanceId cpCaptivePortalInstanceClientAssocMacAddress

Column	Syntax	OID
cpCaptivePortalInstanceClientAssocInstanceId The instance ID associated with this client.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.4526.10.38.2.7.1.1.1
cpCaptivePortalInstanceClientAssocMacAddress The MAC address of the workstation from which the client is authenticated.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4526.10.38.2.7.1.1.2
cpCaptivePortalInstanceClientAssocRowStatus This specifies the row-status of this entry. For a valid entry, the row-status will return active(1). This is the only supported value.	SNMPv2-TCRowStatus Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4526.10.38.2.7.1.1.3

This database is used to web config.

cpCaptivePortalConfigWebEntry row .1.3.6.1.4.1.4526.10.38.5.1.1

Captive Portal instance client status entry.

Indexes

cpCaptivePortalConfigWebInstanceId cpCaptivePortalConfigWebWebId

Column	Syntax	OID
cpCaptivePortalConfigWebInstanceId TThe identifier associated with instance of Captive Portal.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.10.38.5.1.1.1
cpCaptivePortalConfigWebWebId The Web ID associated with this client.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4526.10.38.5.1.1.2