NBS-EUSM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
11
Rows
11
Columns
160

nbsEusmSlotTable

table
.1.3.6.1.4.1.629.202.1.1 · 1 row entry · 26 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsEusmSlotTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBS-EUSM-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBS-EUSM-MIB::nbsEusmSlotTable' 
Contains a description of slot context features applicable
for the whole module. There is going to be one row for each
slot. All the scalar type objects applicable at the slot
context are dumped here.
nbsEusmSlotEntry row .1.3.6.1.4.1.629.202.1.1.1
Contains a description of slot context features applicable
for the whole module. There is going to be one row for each
slot. All the scalar type objects applicable at the slot
context are dumped here.
Indexes
No indexes recorded
Column Syntax OID
nbsEusmSlotSupportsEusm
Is EUSM config and status supported for this slot?
Enumeration
Enumerated Values:
1notSupported
2supported
 .1.3.6.1.4.1.629.202.1.1.1.1
nbsEusmSlotAccControlActionUntag
permit(2) or deny(3) works on all untagged frames
Enumerationr/w
Enumerated Values:
1notSupported
2permit
3deny
 .1.3.6.1.4.1.629.202.1.1.1.2
nbsEusmSlotAccControlActionTag
denyAll(2) filters all tagged frames

denyVlan(3) and permitVlan(4) work on the specified list

permitAll(5) negates access control of tagged frames
Enumerationr/w
Enumerated Values:
1notSupported
2denyAll
3denyVlan
4permitVlan
5permitAll
 .1.3.6.1.4.1.629.202.1.1.1.3
nbsEusmSlotAccControlVidList
List of VLAN in a free format, for example 10-12 15 23-43
1000-1050 specifies 3 different ranges of vlan ids and one
isolated vlan id
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.629.202.1.1.1.4
nbsEusmSlotLinkAggrAdmin
Depending on the link status of the trunk ports the Link
Aggregation operational status may be different, this is why
it calls for both Admin and Oper objects
Enumerationr/w
Enumerated Values:
1notSupported
2off
3onRandom
4onXorAll
5deprecatedonSmac
6onDmac
7onXorSd
8onIp
 .1.3.6.1.4.1.629.202.1.1.1.5
nbsEusmSlotLinkAggrOper
 Enumeration
Enumerated Values:
1notSupported
2off
3onRandom
4onXorAll
5onSmac
6onDmac
7onXorSd
8onIp
 .1.3.6.1.4.1.629.202.1.1.1.6
nbsEusmSlotStormControlBroadcast
User-specified maximum allowed Broadcast frames, in
units of 1000 frames/second. The value zero (0)
indicates this feature is disabled, so no cap will
be enforced.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.629.202.1.1.1.7
nbsEusmSlotStormControlMulticast
User-specified maximum allowed Multicast frames, in
units of 1000 frames/second. The value zero (0)
indicates this feature is disabled, so no cap will
be enforced.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.629.202.1.1.1.8
nbsEusmSlotStormControlUnicast
User-specified maximum allowed Unicast frames, in
units of 1000 frames/second. The value zero (0)
indicates this feature is disabled, so no cap will
be enforced.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.629.202.1.1.1.9
nbsEusmSlotStormBurstSizedeprecated
**** DEPRECATED ****
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.629.202.1.1.1.10
nbsEusmSlotCoSMode
If the user selects bothTagDscp(4), and a packet arrives
with both DSCP and a Vlan tag, the DSCP priority system will
take precedence.

tagOnly(3) will use Layer 2 Vlan Priority bits to assign a
Service
…
Enumerationr/w
Enumerated Values:
1notSupported
2dscpOnly
3tagOnly
4bothTagDscp
5none
 .1.3.6.1.4.1.629.202.1.1.1.11
nbsEusmSlotDscpRemark
The EUSM can be set to mark egress packets with a new DSCP.
The user can set to remark egress DSCP in one of the
following modes: AF or CS Remarking only applies to IPv4 or
IPv6 packets. The user can define which type o…
Enumerationr/w
Enumerated Values:
1notSupported
2enable
3disable
 .1.3.6.1.4.1.629.202.1.1.1.12
nbsEusmSlotDscpEgressMode
The user can set to egress remark DSCP in one of the
following modes:

a) Map CoS class to AF CPs (call it AF-mode)
0: AF12
1: AF22
2: AF32
3: AF42

b) Map CoS class to Class sele…
Enumerationr/w
Enumerated Values:
1notSupported
2afMode
3csMode
 .1.3.6.1.4.1.629.202.1.1.1.13
nbsEusmSlotDscpIngressEf
One of the five ingress options EF,AF,CS,ZERO and OTHER
Enumerationr/w
Enumerated Values:
1notSupported
2enable
3disable
 .1.3.6.1.4.1.629.202.1.1.1.14
nbsEusmSlotDscpIngressAf
One of the five ingress options EF,AF,CS,ZERO and OTHER
Enumerationr/w
Enumerated Values:
1notSupported
2enable
3disable
 .1.3.6.1.4.1.629.202.1.1.1.15
nbsEusmSlotDscpIngressCs
One of the five ingress options EF,AF,CS,ZERO and OTHER
Enumerationr/w
Enumerated Values:
1notSupported
2enable
3disable
 .1.3.6.1.4.1.629.202.1.1.1.16
nbsEusmSlotDscpIngressZeroDscp
One of the five ingress options EF,AF,CS,ZERO and OTHER
Enumerationr/w
Enumerated Values:
1notSupported
2enable
3disable
 .1.3.6.1.4.1.629.202.1.1.1.17
nbsEusmSlotDscpIngressAllOther
One of the five ingress options EF,AF,CS,ZERO and OTHER
Enumerationr/w
Enumerated Values:
1notSupported
2enable
3disable
 .1.3.6.1.4.1.629.202.1.1.1.18
nbsEusmSlotIometrix
Controls whether or not the EUSM should enable Iometrix
Level 1 cNode agent behavior
Enumerationr/w
Enumerated Values:
1notSupported
2off
3on
 .1.3.6.1.4.1.629.202.1.1.1.19
nbsEusmSlotManagementVid
VLAN Id reserved for EUSM management activities.
Integer32r/w
Constraints:
range: 1-4095
 .1.3.6.1.4.1.629.202.1.1.1.20
nbsEusmSlotUserPortIRAdmin
Unit is kilobits per second.

Max possible value is 4,294,967,295 which is large enough
even to represent 1 Terabit communication. This applies to
user ingress traffic that does not match any defined
flow.…
Unsigned32r/w
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.629.202.1.1.1.21
nbsEusmSlotUserPortIROper
Unit is kilobits per second.

Max possible value is 4,294,967,295 which is large enough
even to represent 1 Terabit communication. This is the actual
value applied to user ingress traffic that does not mat…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.1.1.1.22
nbsEusmSlotMaxFlowCfgSize
Maximum number of entries in the FlowCfg table. This may
vary from slot to slot if different versions of EUSM software
support different table sizes.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.202.1.1.1.23
nbsEusmSlotMaxVlanTranSize
Maximum number of entries in the VLAN Translation table.

This may vary from slot to slot if different versions of
EUSM software support different table sizes.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.202.1.1.1.24
nbsEusmSlotMaxDscpMapSize
Maximum number of entries in the DSCP to SLC Priority Map table.

This may vary from slot to slot if different versions of
EUSM software support different table sizes.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.202.1.1.1.25
nbsEusmSlotMaxCosPrioSize
Maximum number of entries in the VLAN CoS to SLC Priority table.

This may vary from slot to slot if different versions of
EUSM software support different table sizes.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.202.1.1.1.26

nbsEusmFlowCfgTable

table
.1.3.6.1.4.1.629.202.1.2 · 1 row entry · 9 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsEusmFlowCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBS-EUSM-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBS-EUSM-MIB::nbsEusmFlowCfgTable' 
A table that describes the Vlan Flow Rate Limits
          
At the moment there is a limit of 32 entries for this table
nbsEusmFlowCfgEntry row .1.3.6.1.4.1.629.202.1.2.1
Contains a description of a particular Vlan Flow Rate Limit
information
Indexes
Column Syntax OID
nbsEusmFlowCfgChassis
The index of the table to refer to Chassis
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.202.1.2.1.1
nbsEusmFlowCfgSlot
The index of the table to refer to Slot of this EUSM
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.202.1.2.1.2
nbsEusmFlowCfgVid
The Vid part of the index.
Integer32
Constraints:
range: 1-4095
 .1.3.6.1.4.1.629.202.1.2.1.3
nbsEusmFlowCfgPriority
Priority part of the VLAN as index.

0(Zero) is don't care and the real priority starts 1 based.
Integer32
Constraints:
range: 0-8
 .1.3.6.1.4.1.629.202.1.2.1.4
nbsEusmFlowCfgRowStatus
This table RowStatus object to create, modify and delete the rows
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.629.202.1.2.1.5
nbsEusmFlowCfgStorageType
This table StorageType
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.629.202.1.2.1.6
nbsEusmFlowCfgIRAdmin
Information Rate (IR) specified for the Vid and priority
combo.

Unit is kilobits per second. Max possible value is
4,294,967,295 which is large enough even to represent 1
Terabit communication.
Unsigned32r/w
Constraints:
range: 0-1000000
 .1.3.6.1.4.1.629.202.1.2.1.7
nbsEusmFlowCfgIROper
Information Rate (IR) that is actually applied to the flow.

Unit is kilobits per second. Max possible value is
4,294,967,295 which is large enough even to represent 1
Terabit communication.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.1.2.1.8
nbsEusmFlowCfgClearCounter
To clear the counters for selected row
Enumerationr/w
Enumerated Values:
1notSupported
2idle
3inProgress
4clear
 .1.3.6.1.4.1.629.202.1.2.1.9

nbsEusmFlowStatusTable

table
.1.3.6.1.4.1.629.202.1.3 · 1 row entry · 2 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsEusmFlowStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBS-EUSM-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBS-EUSM-MIB::nbsEusmFlowStatusTable' 
A table that describes the Vlan Flow Rate Limits
At the moment there is a limit of 32 entries for this table.
nbsEusmFlowStatusEntry row .1.3.6.1.4.1.629.202.1.3.1
Contains status part of the FlowCfgTable
Indexes
No indexes recorded
Column Syntax OID
nbsEusmFlowStatusRxFrames
Received Frames counted
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.1.3.1.1
nbsEusmFlowStatusRxOctets
Received Octets counted
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.1.3.1.2

nbsEusmVidMapTable

table
.1.3.6.1.4.1.629.202.1.4 · 1 row entry · 6 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsEusmVidMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBS-EUSM-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBS-EUSM-MIB::nbsEusmVidMapTable' 
A table that describes the Vlan Translation table
          
At the moment there is a limit of 3 or 7 entries for this
table
nbsEusmVidMapEntry row .1.3.6.1.4.1.629.202.1.4.1
Contains a description of a particular Vlan Translation
table feature
Indexes
Column Syntax OID
nbsEusmVidMapChassis
The index of the table to refer to Chassis
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.202.1.4.1.1
nbsEusmVidMapSlot
The index of the table to refer to Slot of this EUSM
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.202.1.4.1.2
nbsEusmVidMapFromVid
The vlanTranslation index.
Integer32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.629.202.1.4.1.3
nbsEusmVidMapToVid
The vlanTranslation index.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.629.202.1.4.1.4
nbsEusmVidMapRowStatus
This table RowStatus object to create, modify and delete the
rows
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.629.202.1.4.1.5
nbsEusmVidMapStorageType
This table StorageType
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.629.202.1.4.1.6

nbsEusmCoSDscpMapTable

table
.1.3.6.1.4.1.629.202.1.5 · 1 row entry · 6 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsEusmCoSDscpMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBS-EUSM-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBS-EUSM-MIB::nbsEusmCoSDscpMapTable' 
Only 7 possible rows in this table.It is possible to make
this table without the RowStatus object as there are not
going to be variable number of rows in this table. But we
could define less than 7 rows. So RowStatus is added on
nbsEusmCoSDscpMapEntry row .1.3.6.1.4.1.629.202.1.5.1
Ingress Tag prio is mapped to egress SL class queue or
priority
Indexes
Column Syntax OID
nbsEusmCoSDscpMapChassis
The index of the table to refer to Chassis
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.202.1.5.1.1
nbsEusmCoSDscpMapSlot
The index of the table to refer to Slot of this EUSM
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.202.1.5.1.2
nbsEusmCoSDscpMapDscp
DSCP range is 0..63 and since it is an index we make it
1..64 as the 1 based range
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.629.202.1.5.1.3
nbsEusmCoSDscpMapSlcPrio
Service Level Class Priority has 4 queues. Each ingress
packet is assigned a Diffserv Service Level Class as part of
the ingress traffic process. A packet can be forwarded to
any one of 4 hardware egress packet queues o…
Enumerationr/w
Enumerated Values:
1low
2normal
3medium
4high
 .1.3.6.1.4.1.629.202.1.5.1.4
nbsEusmCoSDscpMapRowStatus
This table RowStatus object to create, modify and delete the rows
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.629.202.1.5.1.5
nbsEusmCoSDscpMapStorageType
This table StorageType
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.629.202.1.5.1.6

nbsEusmCoSTagPrioMapTable

table
.1.3.6.1.4.1.629.202.1.6 · 1 row entry · 4 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsEusmCoSTagPrioMapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBS-EUSM-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBS-EUSM-MIB::nbsEusmCoSTagPrioMapTable' 
Only 8 rows in this table.  It is a fixed size table because
rows for all values of the table index Priority object must
be defined in the configured device.
nbsEusmCoSTagPrioMapEntry row .1.3.6.1.4.1.629.202.1.6.1
Ingress Tag priority is mapped to egress Service Level class
queue or priority.
Indexes
Column Syntax OID
nbsEusmCoSTagPrioMapChassis
The index of the table to refer to Chassis
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.202.1.6.1.1
nbsEusmCoSTagPrioMapSlot
The index of the table to refer to Slot of this EUSM
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.629.202.1.6.1.2
nbsEusmCoSTagPrioMapPriority
Tag priority range is 0..7.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.629.202.1.6.1.3
nbsEusmCoSTagPrioMapSlcPrio
Service Level Class Priority has 4 queues. Each ingress
packet is assigned a Diffserv Service Level Class as part of
the ingress traffic process. A packet can be forwarded to
any one of 4 hardware egress packet queues o…
Enumerationr/w
Enumerated Values:
1low
2normal
3medium
4high
 .1.3.6.1.4.1.629.202.1.6.1.4

nbsEusmPortTable

table
.1.3.6.1.4.1.629.202.2.1 · 1 row entry · 8 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsEusmPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBS-EUSM-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBS-EUSM-MIB::nbsEusmPortTable' 
Contains a description of Port context features applicable
There is going to be one row for each port. All the scalar
type objects applicable at the port context are dumped
here.
nbsEusmPortEntry row .1.3.6.1.4.1.629.202.2.1.1
Contains a description of slot context features applicable
for the whole module. There is going to be one row for each
slot. All the scalar type objects applicable at the slot
context are dumped here.
Indexes
No indexes recorded
Column Syntax OID
nbsEusmPortSupportsEusm
Is EUSM config and status supported for this slot?
Enumeration
Enumerated Values:
1notSupported
2supported
 .1.3.6.1.4.1.629.202.2.1.1.1
nbsEusmPortSmartLoopbackAction
 Enumerationr/w
Enumerated Values:
1notSupported
2off
3all
4onDA
5onVid
6onBoth
7mac
 .1.3.6.1.4.1.629.202.2.1.1.2
nbsEusmPortSmartLoopbackSwap
 Enumerationr/w
Enumerated Values:
1notSupported
2off
3on
 .1.3.6.1.4.1.629.202.2.1.1.3
nbsEusmPortSmartLoopbackMac
 OctetStringr/w
Constraints:
range: 6-6
 .1.3.6.1.4.1.629.202.2.1.1.4
nbsEusmPortSmartLoopbackVid
 Integer32r/w
Constraints:
range: 1-4095
 .1.3.6.1.4.1.629.202.2.1.1.5
nbsEusmPortVlanTagAction
add(2) need two more arguments s-vlanId and s-vlan-priority
strip(3)and ignore(4) does not need any argument
Enumerationr/w
Enumerated Values:
1notSupported
2add
3strip
4ignore
 .1.3.6.1.4.1.629.202.2.1.1.6
nbsEusmPortVlanTagVid
need to be specified when VlanTagAction is add(2)
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.629.202.2.1.1.7
nbsEusmPortVlanTagPriority
need to be specified when VlanTagAction is add(2)
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.629.202.2.1.1.8

nbsEusmTgaTable

table
.1.3.6.1.4.1.629.202.3.1 · 1 row entry · 14 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsEusmTgaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBS-EUSM-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBS-EUSM-MIB::nbsEusmTgaTable' 
Contains a description of Test context features applicable.
          
There is going to be one row for each port.
nbsEusmTgaEntry row .1.3.6.1.4.1.629.202.3.1.1
Contains a description of slot context features applicable
for the whole module.

There is going to be one row for each port.
Indexes
No indexes recorded
Column Syntax OID
nbsEusmTgaDa
Destination Address - MAC address
OctetStringr/w
Constraints:
range: 6-6
 .1.3.6.1.4.1.629.202.3.1.1.1
nbsEusmTgaDaType
Different options to specify the Destination Address
Enumerationr/w
Enumerated Values:
1notSupported
2random
3fixed
4increment
 .1.3.6.1.4.1.629.202.3.1.1.2
nbsEusmTgaSa
Source Address - MAC address
OctetStringr/w
Constraints:
range: 6-6
 .1.3.6.1.4.1.629.202.3.1.1.3
nbsEusmTgaSaType
Different options to specify the Source Address
Enumerationr/w
Enumerated Values:
1notSupported
2random
3fixed
4increment
 .1.3.6.1.4.1.629.202.3.1.1.4
nbsEusmTgaTag
VLAN tag or e-type plus initial data If VLAN tagging is not
specified (i.e. Tag does not begin as '8100h', then the first
two bytes of Tag define the frame type, and the last two Tag
bytes are the first two data bytes
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.629.202.3.1.1.5
nbsEusmTgaTagType
Different options to specify the Tag
Enumerationr/w
Enumerated Values:
1notSupported
2random
3fixed
4increment
 .1.3.6.1.4.1.629.202.3.1.1.6
nbsEusmTgaPattern
The two Pattern bytes are replicated as needed to fill-out
the frame to the specified size
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.629.202.3.1.1.7
nbsEusmTgaPatternType
Different options to specify the Source Address
Enumerationr/w
Enumerated Values:
1notSupported
2random
3fixed
 .1.3.6.1.4.1.629.202.3.1.1.8
nbsEusmTgaFrameSize
Frame Size range from 64 to 9600
Integer32r/w
Constraints:
range: 64-9600
 .1.3.6.1.4.1.629.202.3.1.1.9
nbsEusmTgaFrameSizeType
Different options to specify the Frame Size
Enumerationr/w
Enumerated Values:
1notSupported
2random
3fixed
 .1.3.6.1.4.1.629.202.3.1.1.10
nbsEusmTgaFrameCount
 Unsigned32r/w
Constraints:
range: 1-4294967294
 .1.3.6.1.4.1.629.202.3.1.1.11
nbsEusmTgaFrameCountType
Different options to specify the Frame Size
Enumerationr/w
Enumerated Values:
1notSupported
2continuous
3fixed
 .1.3.6.1.4.1.629.202.3.1.1.12
nbsEusmTgaInterPacketGap
Rate Control - only option is fixed. Default is 1249928.
This sets an approx rate of 100/10/1 fps at 1000/100/10
Mbps. Number of bytes between frames. Controls traffic rate
Integer32r/w
Constraints:
range: 12-134217727
 .1.3.6.1.4.1.629.202.3.1.1.13
nbsEusmTgaAction
Different actions to activate the traffic generation. There
are three frame generation activities: specify, start, and
stop. Specifying and actually starting traffic may be done
together or separately. In fact, it is re…
Enumerationr/w
Enumerated Values:
1notSupported
2start
3stop
 .1.3.6.1.4.1.629.202.3.1.1.14

nbsEusmCableTestTable

table
.1.3.6.1.4.1.629.202.3.2 · 1 row entry · 2 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsEusmCableTestTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBS-EUSM-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBS-EUSM-MIB::nbsEusmCableTestTable' 
Cable testing feature
nbsEusmCableTestEntry row .1.3.6.1.4.1.629.202.3.2.1
Cable testing feature
Indexes
No indexes recorded
Column Syntax OID
nbsEusmCableTestStatus
To initiate and get the status of the cable test feature. It
is applicable only to copper ports. In the future we may
have multiple copper ports. A GET on this object will show
testIdle if a test has never been run, or …
Enumerationr/w
Enumerated Values:
1notSupported
2testStart
3testInProgress
4testCompleted
5testIdle
 .1.3.6.1.4.1.629.202.3.2.1.1
nbsEusmCableTestResult
This string will give out the result of the cable test done
with a time stamp that gives the indication as to when the
CableTest was initiated. This also gives the result for all
the 4 pairs of wire. Possible results st…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.629.202.3.2.1.2

nbsEusmLgaTable

table
.1.3.6.1.4.1.629.202.3.3 · 1 row entry · 34 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsEusmLgaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBS-EUSM-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBS-EUSM-MIB::nbsEusmLgaTable' 
Contains a description of Traffic discrepancy counters.
nbsEusmLgaEntry row .1.3.6.1.4.1.629.202.3.3.1
Discrepancy entry
Indexes
No indexes recorded
Column Syntax OID
nbsEusmLgaRdAllFrames
The count of all frames (good+bad) lost/gained (-/+) in the
most recent interval.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.1
nbsEusmLgaRducFrames
The count of good unicast frames lost/gained (-/+) in the
most recent interval.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.2
nbsEusmLgaRdmcFrames
The count of good multicast frames lost/gained (-/+) in the
most recent interval.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.3
nbsEusmLgaRdbcFrames
The count of good broadcast frames lost/gained (-/+) in the
most recent interval.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.4
nbsEusmLgaRdSize64
The count of all 64 byte frames lost/gained (-/+) in the
most recent interval.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.5
nbsEusmLgaRdSizeMax127
The count of all 65-127 byte frames lost/gained (-/+) in the
most recent interval.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.6
nbsEusmLgaRdSizeMax255
The count of all 128-255 byte frames lost/gained (-/+) in
the most recent interval.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.7
nbsEusmLgaRdSizeMax511
The count of all 256-511 byte frames lost/gained (-/+) in
the most recent interval.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.8
nbsEusmLgaRdSizeMax1023
The count of all 512-1023 byte frames lost/gained (-/+) in
the most recent interval.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.9
nbsEusmLgaRdSizeMax1518
The count of all 1024-1518 byte frames lost/gained (-/+) in
the most recent interval.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.10
nbsEusmLgaRdSizeMax2047
The count of all 1519-2047 byte frames lost/gained (-/+) in
the most recent interval.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.11
nbsEusmLgaRdSizeOvr2047
The count of all 2048-plus byte frames lost/gained (-/+) in
the most recent interval.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.12
nbsEusmLgaRdFrameDivisor
The divisor to calculate frame loss/gain ratios for the most
recent interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.3.1.13
nbsEusmLgaRdAllOctets
The count of all frame octets lost/gained (-/+) in the most
recent interval.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.14
nbsEusmLgaRdOctetDivisor
The divisor to calculate octet loss/gain ratios for the most
recent interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.3.1.15
nbsEusmLgaRdTimeSpan
The time span (tenths of a sec) for the most recent
interval.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.3.1.16
nbsEusmLgaAdAllFrames
The accumulated count of all frames (good+bad) lost/gained
(-/+) over all intervals.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.17
nbsEusmLgaAducFrames
The accumulated count of good unicast frames lost/gained
(-/+) over all intervals.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.18
nbsEusmLgaAdmcFrames
The accumulated count of good multicast frames lost/gained
(-/+) over all intervals.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.19
nbsEusmLgaAdbcFrames
The accumulated count of good broadcast frames lost/gained
(-/+) over all intervals.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.20
nbsEusmLgaAdSize64
The accumulated count of all 64 byte frames lost/gained
(-/+) over all intervals.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.21
nbsEusmLgaAdSizeMax127
The accumulated count of all 65-127 byte frames lost/gained
(-/+) over all intervals.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.22
nbsEusmLgaAdSizeMax255
The accumulated count of all 128-255 byte frames lost/gained
(-/+) over all intervals.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.23
nbsEusmLgaAdSizeMax511
The accumulated count of all 256-511 byte frames lost/gained
(-/+) over all intervals.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.24
nbsEusmLgaAdSizeMax1023
The accumulated count of all 512-1023 byte frames
lost/gained (-/+) over all intervals.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.25
nbsEusmLgaAdSizeMax1518
The accumulated count of all 1024-1518 byte frames
lost/gained (-/+) over all intervals.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.26
nbsEusmLgaAdSizeMax2047
The accumulated count of all 1519-2047 byte frames
lost/gained (-/+) over all intervals.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.27
nbsEusmLgaAdSizeOvr2047
The accumulated count of all 2048-plus byte frames
lost/gained (-/+) over all intervals.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.28
nbsEusmLgaAdFrameDivisor
The divisor to calculate frame loss/gain ratios over all intervals.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.3.1.29
nbsEusmLgaAdAllOctets
The accumulated count of all frame octets lost/gained (-/+)
over all intervals.

Not supported value: 0x80000000
Integer32
Constraints:
range: -2147483648-2147483647
 .1.3.6.1.4.1.629.202.3.3.1.30
nbsEusmLgaAdOctetDivisor
The divisor to calculate octet loss/gain ratios over all intervals.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.3.1.31
nbsEusmLgaAdTimeSpan
The accumulated time span (tenths of a sec) for all intervals.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.3.1.32
nbsEusmSlotLgaInterval
Traffic Analysis (loss/gain) sampling time interval (sec).
Practical range allowed is 10 seconds to 1 day.
Integer32r/w
Constraints:
range: 10-86400
 .1.3.6.1.4.1.629.202.3.3.1.33
nbsEusmSlotLgaAction
Traffic Analysis (loss/gain) activity status.
Enumerationr/w
Enumerated Values:
1notSupported
2inactive
3start
4stop
5inProgress
 .1.3.6.1.4.1.629.202.3.3.1.34

nbsEusmPmTable

table
.1.3.6.1.4.1.629.202.3.4 · 1 row entry · 49 columns
Open in standard view
Uses the mrv variant from /opt/observium/mibs/mrv.
Command help
Walk nbsEusmPmTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'NBS-EUSM-MIB' -M '/opt/observium/mibs/mrv:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'NBS-EUSM-MIB::nbsEusmPmTable' 
Contains a description of Traffic discrepancy counters.
nbsEusmPmEntry row .1.3.6.1.4.1.629.202.3.4.1
Performance Monitoring entry
Indexes
No indexes recorded
Column Syntax OID
nbsEusmPmAvgAllSizes
The average transit time (nanosec) for monitored frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.1
nbsEusmPmAvg64
The average transit time (nanosec) for monitored 64 byte
frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.2
nbsEusmPmAvg127
The average transit time (nanosec) for monitored 65-127 byte
frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.3
nbsEusmPmAvg255
The average transit time (nanosec) for monitored 128-255
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.4
nbsEusmPmAvg511
The average transit time (nanosec) for monitored 256-511
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.5
nbsEusmPmAvg1023
The average transit time (nanosec) for monitored 512-1023
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.6
nbsEusmPmAvg1518
The average transit time (nanosec) for monitored 1024-1518
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.7
nbsEusmPmAvg2047
The average transit time (nanosec) for monitored 1519-2047
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.8
nbsEusmPmAvgOvr2047
The average transit time (nanosec) for monitored 2048-plus
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.9
nbsEusmPmMinAllSizes
The minimum transit time (nanosec) for monitored frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.10
nbsEusmPmMin64
The minimum transit time (nanosec) for monitored 64
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.11
nbsEusmPmMin127
The minimum transit time (nanosec) for monitored 65-127
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.12
nbsEusmPmMin255
The minimum transit time (nanosec) for monitored 128-255
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.13
nbsEusmPmMin511
The minimum transit time (nanosec) for monitored 256-511
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.14
nbsEusmPmMin1023
The minimum transit time (nanosec) for monitored 512-1023
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.15
nbsEusmPmMin1518
The minimum transit time (nanosec) for monitored 1024-1518
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.16
nbsEusmPmMin2047
The minimum transit time (nanosec) for monitored 1519-2047
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.17
nbsEusmPmMinOvr2047
The minimum transit time (nanosec) for monitored 2048-plus
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.18
nbsEusmPmMaxAllSizes
The maximum transit time (nanosec) for monitored frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.19
nbsEusmPmMax64
The maximum transit time (nanosec) for monitored 64
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.20
nbsEusmPmMax127
The maximum transit time (nanosec) for monitored 65-127
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.21
nbsEusmPmMax255
The maximum transit time (nanosec) for monitored 128-255
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.22
nbsEusmPmMax511
The maximum transit time (nanosec) for monitored 256-511
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.23
nbsEusmPmMax1023
The maximum transit time (nanosec) for monitored 512-1023
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.24
nbsEusmPmMax1518
The maximum transit time (nanosec) for monitored 1024-1518
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.25
nbsEusmPmMax2047
The maximum transit time (nanosec) for monitored 1519-2047
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.26
nbsEusmPmMaxOvr2047
The maximum transit time (nanosec) for monitored 2048-plus
byte frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.629.202.3.4.1.27
nbsEusmPmFramesAllSizes
The count of all monitored frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.28
nbsEusmPmFrames64
The count of all monitored 64 byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.29
nbsEusmPmFrames127
The count of all monitored 65-127 byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.30
nbsEusmPmFrames255
The count of all monitored 128-255 byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.31
nbsEusmPmFrames511
The count of all monitored 256-511 byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.32
nbsEusmPmFrames1023
The count of all monitored 512-1023 byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.33
nbsEusmPmFrames1518
The count of all monitored 1024-1518 byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.34
nbsEusmPmFrames2047
The count of all monitored 1519-2047 byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.35
nbsEusmPmFramesOvr2047
The count of all monitored 2048-plus byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.36
nbsEusmPmOctetsAllSizes
The count of octets in all monitored frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.37
nbsEusmPmOctets64
The count of octets in all monitored 64 byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.38
nbsEusmPmOctets127
The count of octets in all monitored 65-127 byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.39
nbsEusmPmOctets255
The count of octets in all monitored 128-255 byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.40
nbsEusmPmOctets511
The count of octets in all monitored 256-511 byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.41
nbsEusmPmOctets1023
The count of octets in all monitored 512-1023 byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.42
nbsEusmPmOctets1518
The count of octets in all monitored 1024-1518 byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.43
nbsEusmPmOctets2047
The count of octets in all monitored 1519-2047 byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.44
nbsEusmPmOctetsOvr2047
The count of octets in all monitored 2048-plus byte frames.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.629.202.3.4.1.45
nbsEusmSlotPmInterval
Performance Monitoring time duration (sec). Practical range
allowed is 1 minute to 1 week.
Integer32r/w
Constraints:
range: 60-604800
 .1.3.6.1.4.1.629.202.3.4.1.46
nbsEusmSlotPmSelector
Performance Monitoring traffic direction selector.

coToCpe(2) measures from CO's active trunk port to
CPE's active trunk port.

cpeToCo(3) measures from CPE's active trunk port to
CO's activ…
Enumerationr/w
Enumerated Values:
1notSupported
2coToCpe
3cpeToCo
4cpeTx
5cpeRx
 .1.3.6.1.4.1.629.202.3.4.1.47
nbsEusmSlotPmAction
Traffic Analysis (performance monitoring) activity status.
Enumerationr/w
Enumerated Values:
1notSupported
2inactive
3start
4stop
5inProgress
6complete
7stopping
 .1.3.6.1.4.1.629.202.3.4.1.48
nbsEusmSlotPmCapabilities
This bitmask indicates which performance monitoring selectors
this slot can support. This object is mandatory for all slots
in systems where the nbsEusmSlotPmSelector object is supported.
Each capability is represente…
OctetString
Constraints:
range: 1-1
 .1.3.6.1.4.1.629.202.3.4.1.49