nbsEusmSlotAccControlActionUntag
NBS-EUSM-MIB ·
.1.3.6.1.4.1.629.202.1.1.1.2
Object
column
r/w
Enumeration
permit(2) or deny(3) works on all untagged frames
Context
- MIB
- NBS-EUSM-MIB
- OID
.1.3.6.1.4.1.629.202.1.1.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nbsEusmSlotEntry
- Table
- nbsEusmSlotTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notSupported |
2 | permit |
3 | deny |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsEusmSlotSupportsEusm Is EUSM config and status supported for this slot? | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.1 |
| nbsEusmSlotStormBurstSize deprecated **** DEPRECATED **** | column | Integer32 | .1.3.6.1.4.1.629.202.1.1.1.10 |
| nbsEusmSlotCoSMode If the user selects bothTagDscp(4), and a packet arrives
with both DSCP and a Vlan tag, the DSCP priority system will
take precedence.
tagOnly(3) will use Layer 2 … | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.11 |
| nbsEusmSlotDscpRemark The EUSM can be set to mark egress packets with a new DSCP.
The user can set to remark egress DSCP in one of the
following modes: AF or CS Remarking only applies to IPv4 or
IPv6 p… | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.12 |
| nbsEusmSlotDscpEgressMode The user can set to egress remark DSCP in one of the
following modes:
a) Map CoS class to AF CPs (call it AF-mode)
0: AF12
1: AF22
2: AF32
3: AF42
… | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.13 |
| nbsEusmSlotDscpIngressEf One of the five ingress options EF,AF,CS,ZERO and OTHER | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.14 |
| nbsEusmSlotDscpIngressAf One of the five ingress options EF,AF,CS,ZERO and OTHER | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.15 |
| nbsEusmSlotDscpIngressCs One of the five ingress options EF,AF,CS,ZERO and OTHER | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.16 |
| nbsEusmSlotDscpIngressZeroDscp One of the five ingress options EF,AF,CS,ZERO and OTHER | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.17 |
| nbsEusmSlotDscpIngressAllOther One of the five ingress options EF,AF,CS,ZERO and OTHER | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.18 |
| nbsEusmSlotIometrix Controls whether or not the EUSM should enable Iometrix
Level 1 cNode agent behavior | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.19 |
| nbsEusmSlotManagementVid VLAN Id reserved for EUSM management activities. | column | Integer32 | .1.3.6.1.4.1.629.202.1.1.1.20 |
| nbsEusmSlotUserPortIRAdmin Unit is kilobits per second.
Max possible value is 4,294,967,295 which is large enough
even to represent 1 Terabit communication. This applies to
user ingress traff… | column | Unsigned32 | .1.3.6.1.4.1.629.202.1.1.1.21 |
| nbsEusmSlotUserPortIROper Unit is kilobits per second.
Max possible value is 4,294,967,295 which is large enough
even to represent 1 Terabit communication. This is the actual
value applied t… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.202.1.1.1.22 |
| nbsEusmSlotMaxFlowCfgSize Maximum number of entries in the FlowCfg table. This may
vary from slot to slot if different versions of EUSM software
support different table sizes. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.202.1.1.1.23 |
| nbsEusmSlotMaxVlanTranSize Maximum number of entries in the VLAN Translation table.
This may vary from slot to slot if different versions of
EUSM software support different table sizes. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.202.1.1.1.24 |
| nbsEusmSlotMaxDscpMapSize Maximum number of entries in the DSCP to SLC Priority Map table.
This may vary from slot to slot if different versions of
EUSM software support different table size… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.202.1.1.1.25 |
| nbsEusmSlotMaxCosPrioSize Maximum number of entries in the VLAN CoS to SLC Priority table.
This may vary from slot to slot if different versions of
EUSM software support different table size… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.202.1.1.1.26 |
| nbsEusmSlotAccControlActionTag denyAll(2) filters all tagged frames
denyVlan(3) and permitVlan(4) work on the specified list
permitAll(5) negates access control of tagged frames | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.3 |
| nbsEusmSlotAccControlVidList List of VLAN in a free format, for example 10-12 15 23-43
1000-1050 specifies 3 different ranges of vlan ids and one
isolated vlan id | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.629.202.1.1.1.4 |
| nbsEusmSlotLinkAggrAdmin Depending on the link status of the trunk ports the Link
Aggregation operational status may be different, this is why
it calls for both Admin and Oper objects | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.5 |
| nbsEusmSlotLinkAggrOper | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.6 |
| nbsEusmSlotStormControlBroadcast User-specified maximum allowed Broadcast frames, in
units of 1000 frames/second. The value zero (0)
indicates this feature is disabled, so no cap will
be enforced. | column | Integer32 | .1.3.6.1.4.1.629.202.1.1.1.7 |
| nbsEusmSlotStormControlMulticast User-specified maximum allowed Multicast frames, in
units of 1000 frames/second. The value zero (0)
indicates this feature is disabled, so no cap will
be enforced. | column | Integer32 | .1.3.6.1.4.1.629.202.1.1.1.8 |
| nbsEusmSlotStormControlUnicast User-specified maximum allowed Unicast frames, in
units of 1000 frames/second. The value zero (0)
indicates this feature is disabled, so no cap will
be enforced. | column | Integer32 | .1.3.6.1.4.1.629.202.1.1.1.9 |