nbsEusmSlotDscpRemark
NBS-EUSM-MIB ·
.1.3.6.1.4.1.629.202.1.1.1.12
Object
column
r/w
Enumeration
The EUSM can be set to mark egress packets with a new DSCP. The user can set to remark egress DSCP in one of the following modes: AF or CS Remarking only applies to IPv4 or IPv6 packets. The user can define which type of incoming (ingress )DSCP frames will be remarked.Selection includes the combination of EF,AF,CS,Zero DSCP and all others.
Context
- MIB
- NBS-EUSM-MIB
- OID
.1.3.6.1.4.1.629.202.1.1.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- nbsEusmSlotEntry
- Table
- nbsEusmSlotTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | notSupported |
2 | enable |
3 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| nbsEusmSlotSupportsEusm Is EUSM config and status supported for this slot? | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.1 |
| nbsEusmSlotStormBurstSize deprecated **** DEPRECATED **** | column | Integer32 | .1.3.6.1.4.1.629.202.1.1.1.10 |
| nbsEusmSlotCoSMode If the user selects bothTagDscp(4), and a packet arrives
with both DSCP and a Vlan tag, the DSCP priority system will
take precedence.
tagOnly(3) will use Layer 2 … | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.11 |
| nbsEusmSlotDscpEgressMode The user can set to egress remark DSCP in one of the
following modes:
a) Map CoS class to AF CPs (call it AF-mode)
0: AF12
1: AF22
2: AF32
3: AF42
… | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.13 |
| nbsEusmSlotDscpIngressEf One of the five ingress options EF,AF,CS,ZERO and OTHER | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.14 |
| nbsEusmSlotDscpIngressAf One of the five ingress options EF,AF,CS,ZERO and OTHER | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.15 |
| nbsEusmSlotDscpIngressCs One of the five ingress options EF,AF,CS,ZERO and OTHER | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.16 |
| nbsEusmSlotDscpIngressZeroDscp One of the five ingress options EF,AF,CS,ZERO and OTHER | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.17 |
| nbsEusmSlotDscpIngressAllOther One of the five ingress options EF,AF,CS,ZERO and OTHER | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.18 |
| nbsEusmSlotIometrix Controls whether or not the EUSM should enable Iometrix
Level 1 cNode agent behavior | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.19 |
| nbsEusmSlotAccControlActionUntag permit(2) or deny(3) works on all untagged frames | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.2 |
| nbsEusmSlotManagementVid VLAN Id reserved for EUSM management activities. | column | Integer32 | .1.3.6.1.4.1.629.202.1.1.1.20 |
| nbsEusmSlotUserPortIRAdmin Unit is kilobits per second.
Max possible value is 4,294,967,295 which is large enough
even to represent 1 Terabit communication. This applies to
user ingress traff… | column | Unsigned32 | .1.3.6.1.4.1.629.202.1.1.1.21 |
| nbsEusmSlotUserPortIROper Unit is kilobits per second.
Max possible value is 4,294,967,295 which is large enough
even to represent 1 Terabit communication. This is the actual
value applied t… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.629.202.1.1.1.22 |
| nbsEusmSlotMaxFlowCfgSize Maximum number of entries in the FlowCfg table. This may
vary from slot to slot if different versions of EUSM software
support different table sizes. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.202.1.1.1.23 |
| nbsEusmSlotMaxVlanTranSize Maximum number of entries in the VLAN Translation table.
This may vary from slot to slot if different versions of
EUSM software support different table sizes. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.202.1.1.1.24 |
| nbsEusmSlotMaxDscpMapSize Maximum number of entries in the DSCP to SLC Priority Map table.
This may vary from slot to slot if different versions of
EUSM software support different table size… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.202.1.1.1.25 |
| nbsEusmSlotMaxCosPrioSize Maximum number of entries in the VLAN CoS to SLC Priority table.
This may vary from slot to slot if different versions of
EUSM software support different table size… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.629.202.1.1.1.26 |
| nbsEusmSlotAccControlActionTag denyAll(2) filters all tagged frames
denyVlan(3) and permitVlan(4) work on the specified list
permitAll(5) negates access control of tagged frames | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.3 |
| nbsEusmSlotAccControlVidList List of VLAN in a free format, for example 10-12 15 23-43
1000-1050 specifies 3 different ranges of vlan ids and one
isolated vlan id | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.629.202.1.1.1.4 |
| nbsEusmSlotLinkAggrAdmin Depending on the link status of the trunk ports the Link
Aggregation operational status may be different, this is why
it calls for both Admin and Oper objects | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.5 |
| nbsEusmSlotLinkAggrOper | column | Enumeration | .1.3.6.1.4.1.629.202.1.1.1.6 |
| nbsEusmSlotStormControlBroadcast User-specified maximum allowed Broadcast frames, in
units of 1000 frames/second. The value zero (0)
indicates this feature is disabled, so no cap will
be enforced. | column | Integer32 | .1.3.6.1.4.1.629.202.1.1.1.7 |
| nbsEusmSlotStormControlMulticast User-specified maximum allowed Multicast frames, in
units of 1000 frames/second. The value zero (0)
indicates this feature is disabled, so no cap will
be enforced. | column | Integer32 | .1.3.6.1.4.1.629.202.1.1.1.8 |
| nbsEusmSlotStormControlUnicast User-specified maximum allowed Unicast frames, in
units of 1000 frames/second. The value zero (0)
indicates this feature is disabled, so no cap will
be enforced. | column | Integer32 | .1.3.6.1.4.1.629.202.1.1.1.9 |