MX-DATAIF-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
7

dataIfTable

table
.1.3.6.1.4.1.4935.15.35.1.18 · 1 row entry · 3 columns
Open in standard view
Uses the media5 variant from /opt/observium/mibs/media5.
Command help
Walk dataIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MX-DATAIF-MIB' -M '/opt/observium/mibs/media5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MX-DATAIF-MIB::dataIfTable' 
Data interface configuration table.
dataIfEntry row .1.3.6.1.4.1.4935.15.35.1.18.50
A row in dataIfTable.
Indexes
Column Syntax OID
dataIfCngToneDetectionEnable
Enables fax calling tone (CNG tone) detection.

enable: Upon recognition of the CNG tone, the unit
switches the communication from voice mode to fax
mode and the CNG is transferred using the preferred
fax …
MX-TCMxEnableStater/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4935.15.35.1.18.50.50
dataIfCedFaxToneEnable
Defines the behaviour of the unit upon reception of
a CED fax tone from the network.

enable: Upon reception of a CED tone following a
sent CNG tone, the unit switches the communication
from voice mode to …
MX-TCMxEnableStater/w
Type Values:
0disable
1enable
 .1.3.6.1.4.1.4935.15.35.1.18.50.100
dataIfAnalogCedDetectionBehavior
Defines the behaviour of the unit upon reception of
a CED fax tone from the analog port.

passthrough: In passthrough mode the CED tone does not
trigger a transition from voice to data and is transferred
i…
Enumerationr/w
Enumerated Values:
100passthrough
200faxmode
 .1.3.6.1.4.1.4935.15.35.1.18.50.150

dataIfCodecTable

table
.1.3.6.1.4.1.4935.15.35.1.20 · 1 row entry · 4 columns
Open in standard view
Uses the media5 variant from /opt/observium/mibs/media5.
Command help
Walk dataIfCodecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MX-DATAIF-MIB' -M '/opt/observium/mibs/media5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MX-DATAIF-MIB::dataIfCodecTable' 
Table that contains data interface configuration parameters.
dataIfCodecEntry row .1.3.6.1.4.1.4935.15.35.1.20.1
Table entry of the data interface table.
Indexes
Column Syntax OID
dataIfCodecMediaTypeImageEnable
disable : image media type is not present in the SDP.
pcmu : image media type is present in the SDP for PCMU only.
pcma : image media type is present in the SDP for PCMA only.
pcmu-pcma :…
Enumerationr/w
Enumerated Values:
0disable
1pcmu
2pcma
3pcmu-pcma
4g726
5pcmu-g726
6pcma-g726
7pcmu-pcma-g726
 .1.3.6.1.4.1.4935.15.35.1.20.1.1
dataIfClearChannelCodecPreferred
Indicates the preferred clear channel type of codec
for fax transmission.

This variable increases the relative priority of
the selected codec vs other data-capable codecs.
However, the priority of the pre…
Enumerationr/w
Enumerated Values:
1pcmu
2pcma
5g726-32kbs
6g726-40kbs
7noPreferredCodec
 .1.3.6.1.4.1.4935.15.35.1.20.1.2
dataIfCodecT38Enable
If enabled, the T.38 protocol will be used for Fax transmission.
If signalingProtocolDependent is selected, the signaling protocol
has the control to enable or disable T.38.

This variable's semantics are …
Enumerationr/w
Enumerated Values:
0disable
1enable
2signalingProtocolDependent
 .1.3.6.1.4.1.4935.15.35.1.20.1.5
dataIfCodecT38ProtectionLevel
The number of redundancy packets. This is the standard
redundancy offered by T.38.

Please see dataIfT38FinalFramesRedundancy for additional
reliability options for T.38.
Unsigned32r/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.4935.15.35.1.20.1.6