MX-DATAIF-MIB
This MIB provides information to configure data interface
(such as T.38, Fax, etc.) on a per interface basis.
- Source file
MX-DATAIF-MIB- Last revised
- Identity
dataIfMIB- Base OID
1.3.6.1.4.1.4935.15.35
Imported Objects
| MX-SMI | mediatrixConfig |
| MX-TC | MxEnableState |
| RFC1213-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32 |
Net-SNMP examples using the media5 MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'MX-DATAIF-MIB' -M '/opt/observium/mibs/media5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'MX-DATAIF-MIB::dataIfMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MX-DATAIF-MIB' -M '/opt/observium/mibs/media5:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MX-DATAIF-MIB::dataIfMIB'
Objects (20)
Showing 20 of 20 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.4935.15.35 |
||
.1.3.6.1.4.1.4935.15.35.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.4935.15.35.1.140 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4935.15.35.1.15 |
|
.1.3.6.1.4.1.4935.15.35.1.18 |
||
.1.3.6.1.4.1.4935.15.35.1.18.50 |
||
.1.3.6.1.4.1.4935.15.35.1.18.50.100 |
||
|
Enumeration
|
.1.3.6.1.4.1.4935.15.35.1.18.50.150 |
|
.1.3.6.1.4.1.4935.15.35.1.18.50.50 |
||
.1.3.6.1.4.1.4935.15.35.1.20 |
||
.1.3.6.1.4.1.4935.15.35.1.20.1 |
||
|
Enumeration
|
.1.3.6.1.4.1.4935.15.35.1.20.1.1 |
|
|
Enumeration
|
.1.3.6.1.4.1.4935.15.35.1.20.1.2 |
|
|
Enumeration
|
.1.3.6.1.4.1.4935.15.35.1.20.1.5 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4935.15.35.1.20.1.6 |
|
|
Unsigned32
|
.1.3.6.1.4.1.4935.15.35.1.40 |
|
.1.3.6.1.4.1.4935.15.35.1.90 |
||
.1.3.6.1.4.1.4935.15.35.2 |
||
.1.3.6.1.4.1.4935.15.35.2.1 |
||
.1.3.6.1.4.1.4935.15.35.2.2 |
Dependencies (9) 5 direct · 4 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- MX-SMImedia5
- SNMPv2-TCrfc
- MX-TCmedia5
- IANAifType-MIBrfc
- RFC-1212rfc
- RFC1155-SMIrfc
- RFC1213-MIBrfc
- SNMPv2-CONFrfc
- MX-DATAIF-MIBmedia5selected
Conformance Groups (1)
|
dataIfCngToneDetectionEnable dataIfCedFaxToneEnable dataIfAnalogCedDetectionBehavior dataIfCodecT38Enable dataIfCodecMediaTypeImageEnable dataIfClearChannelCodecPreferred dataIfCodecT38ProtectionLevel dataIfT38FinalFramesRedundancy dataIfT38NoSignalEnable dataIfT38NoSignalTimeout dataIfT38BasePort
This group holds the objects necessary to control data transmission.
|
.1.3.6.1.4.1.4935.15.35.2.2.1
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.4935.15.35.2.1.1Basic data interface requirements.
Required groups
| mandatory | dataIfGroupVer1 |