MPOA-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
21
Rows
21
Columns
175

deviceTypeTable

table
.1.3.6.1.4.1.353.5.8.1.1.1.1 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk deviceTypeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::deviceTypeTable' 
The device type table
represents the mapping of the Lane Data ATM address
to the MAC device capability.
The unique key is the Lane data ATM address and Lec Index
of the LEC associated with the MAC addresses.
This table contains information which was
gathered from its environment about neighboring
machines.
This Device type table represents the information of
other/remote MPOA devices, discovered/gathered by each MPOA
device. This MIB is not the device type of MPS/MPC
itself; it is DISCOVERED information.
deviceTypeEntry row .1.3.6.1.4.1.353.5.8.1.1.1.1.1
An entry in this table and corresponding entries in the
deviceTypeMpsMacAddressTable represent a mapping of a MAC device
capability (i.e. the set of MAC addresses from a device) to the
LEC ATM Address.
Indexes
Column Syntax OID
deviceTypeIndex
Index into this table and also used as one of the indices for
the deviceTypeMpsMacAddressTable. This index has local
significance within the mpoaDeviceGroup.
Entries in the `deviceTypeMpsMacAddressTable' which correspo…
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.353.5.8.1.1.1.1.1.1
deviceTypeLecIndex
LecIndex of LEC that supports this
data ATM address
LecIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.1.1.1.2
deviceTypeRemoteLecAtmAddress
The ATM address learned by LE ARP.
AtmAddr
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.8.1.1.1.1.1.3
deviceTypeType
same as the TLV
Enumeration
Enumerated Values:
1nonMpoa
2mps
3mpc
4mpsAndMpc
 .1.3.6.1.4.1.353.5.8.1.1.1.1.1.4
deviceTypeMpsAtmAddress
Associated MPS address, zeros for non-MPOA and mpc
AtmAddr
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.8.1.1.1.1.1.5
deviceTypeMpcAtmAddress
Associated MPC address, zeros for non-MPOA & mps
AtmAddr
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.8.1.1.1.1.1.6

deviceTypeMpsMacAddressTable

table
.1.3.6.1.4.1.353.5.8.1.1.1.2 · 1 row entry · 1 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk deviceTypeMpsMacAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::deviceTypeMpsMacAddressTable' 
This table contains MPS MAC Address information gathered from
the MPOA DeviceTypeTLV.
deviceTypeMpsMacAddressEntry row .1.3.6.1.4.1.353.5.8.1.1.1.2.1
Each entry represents an MPS MAC Address. Each entry
corresponds to a deviceTypeIndex value for which the
deviceTypeType attribute is `mps' or `mpsAndMpc'.
Indexes
Column Syntax OID
deviceTypeMpsMacAddress
MPS MAC address contained in the Device Type TLV which
is identified by the deviceTypeIndex in the deviceTypeTable.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.353.5.8.1.1.1.2.1.1

mpcConfigTable

table
.1.3.6.1.4.1.353.5.8.1.1.2.2 · 1 row entry · 9 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpcConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpcConfigTable' 
The MPOA Client Configuration Table.
This table contains configuration information
for all MPOA Clients which this agent manages.
mpcConfigEntry row .1.3.6.1.4.1.353.5.8.1.1.2.2.1
MPOA Client Configuration Entry.
Each entry contains configuration information
for one MPOA Client. The configuration information, including
the mpcIndex, must be restored after a re-initialization of an
MPC or a re-in…
Indexes
Column Syntax OID
mpcIndex
A value which uniquely identifies this conceptual
row in the mpcConfigTable. The `mpcNextIndex' object
needs to be used to determine the value of this object.
A row cannot be added, unless the mpcCtrlAtmAddress is uniq…
MpcIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.2.2.1.1
mpcRowStatus
This object allows creation and deletion of
MPOA Clients.

Within each conceptual mpcConfigTable row, writable objects
may be modified, regardless of the value of mpcRowStatus.
It is not necessary to set a…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.353.5.8.1.1.2.2.1.2
mpcConfigMode
Indicates whether this MPC should auto-configure
the next time it is (re-)initialized.
During the (re-)initialization of this MPC, if
the mode is automatic(1), the LECS is contacted and
requests are made for all MPC-p* …
Enumerationr/w
Enumerated Values:
1automatic
2manual
 .1.3.6.1.4.1.353.5.8.1.1.2.2.1.3
mpcCtrlAtmAddr
The MPC's Control ATM Address. There exists one
Control ATM Address per MPC, therefore, the value
of this entry is unique within the table. The control ATM
Address is the address which is used by the MPC in its reques…
AtmConfigAddrr/w
Type Constraints:
range: 1
range: 8
range: 20
 .1.3.6.1.4.1.353.5.8.1.1.2.2.1.4
mpcSCSetupFrameCount
This represents the MPC-p1 Short-cut setup frame count
parameter.

The MPC-p1 value is frames measured over mpcSCFrameTime seconds.
Flow detection is protocol independent. i.e. all network layers
mpcProtoc…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.353.5.8.1.1.2.2.1.5
mpcSCSetupFrameTime
MPC-p2 Short-cut setup frame time, in seconds.
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.353.5.8.1.1.2.2.1.6
mpcInitialRetryTime
MPC-p4 is the initial value for the retry time out
period used for timing out MPOA Resolution Requests
in seconds. Retry time consists of this initial
time-out (MPC-p4) and a retry multiplier (MPC-c1).
If a response is…
Integer32r/w
Constraints:
range: 1-300
 .1.3.6.1.4.1.353.5.8.1.1.2.2.1.7
mpcRetryTimeMaximum
MPC-p5 cumulative max value for Retry Time (MPC-p4).
Retries are attempted at intervals determined by the
algorithm described in the definition of mpcIntialRetryTime.
Integer32r/w
Constraints:
range: 10-300
 .1.3.6.1.4.1.353.5.8.1.1.2.2.1.8
mpcHoldDownTime
MPC-p6 Hold Down Time
Minimum time to wait before reinitiating
a failed resolution attempt. Default is
mpcRetryTimeMaximum * 4.
Integer32r/w
Constraints:
range: 30-1200
 .1.3.6.1.4.1.353.5.8.1.1.2.2.1.9

mpcActualTable

table
.1.3.6.1.4.1.353.5.8.1.1.2.3 · 1 row entry · 8 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpcActualTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpcActualTable' 
MPOA Client Actual Table.
A read-only table which contains state
information and reflects the actual values which
these MPOA Clients are using.  The actual
values may differ from the configured values.
For example, the mpcConfigMode takes affect
only during (re-)initialization of the MPC.
The MPC-p1 to MPC-p6 parameters may differ
from the configured values because, if the
MPC was (re-)initialized and the mpcConfigMode
was set to automatic (1) then some, perhaps all,
of the MPC-p1 to MPC-p6 parameters were retrieved
from the LECS and the values from the LECS may
differ from the configured/default values of the
mpcConfigTable.  NOTE:  after re-initialization
a set to an object in the mpcConfigTable which
changes the value of the object will be reflect
in this Table, except for a set to the
mpcConfigMode which takes effect only during
re-initialization.
mpcActualEntry row .1.3.6.1.4.1.353.5.8.1.1.2.3.1
An entry in the MPC Actual Table.
An entry represents a specific MPOA Client's
state information and the actual values
which are being used by the MPOA Client.
For example, the corresponding mpcConfigEntry contains
defa…
Indexes
No indexes recorded
Column Syntax OID
mpcActualState
This object indicates the actual state
of the MPOA Client.
Enumeration
Enumerated Values:
1unknown
2initialState
3up
4down
 .1.3.6.1.4.1.353.5.8.1.1.2.3.1.1
mpcDiscontinuityTime
The value of sysUpTime on the most recent occasion at
which any one or more of this MPC's counters
experienced a discontinuity. The relevant counters
are the specific instances associated with this
MPC. If discontinui…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.353.5.8.1.1.2.3.1.2
mpcActualConfigMode
Indicates whether this MPC auto-configured
when it was last (re-)initialized.
Enumeration
Enumerated Values:
1automatic
2manual
 .1.3.6.1.4.1.353.5.8.1.1.2.3.1.3
mpcActualSCSetupFrameCount
MPC-p1 Short-cut setup frame count.
In frames measured over mpcShortcutFrameTime seconds.
Flow detection is protocol independent. i.e. all
network layers mpcProtocolEntry share the flow rate
specification.
A value of 1 …
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.353.5.8.1.1.2.3.1.4
mpcActualSCSetupFrameTime
Actual MPC-p2 Short-cut setup frame time, in seconds.
Integer32
Constraints:
range: 1-60
 .1.3.6.1.4.1.353.5.8.1.1.2.3.1.5
mpcActualInitialRetryTime
Actual MPC-p4 is initial value for the
retry time out.
Integer32
Constraints:
range: 1-300
 .1.3.6.1.4.1.353.5.8.1.1.2.3.1.6
mpcActualRetryTimeMaximum
MPC-p5 cumulative maximum value for Retry Time (MPC-p4).
Retries are attempted at intervals determined by the
algorithm described in the definition of
mpcActualInitialRetryTime.
Integer32
Constraints:
range: 30-300
 .1.3.6.1.4.1.353.5.8.1.1.2.3.1.7
mpcActualHoldDownTime
MPC-p6 Hold Down Time
Minimum time to wait before reinitiating a failed
resolution attempt. The default value is
mpcRetryTimeMaximum * 4.
Integer32
Constraints:
range: 30-1200
 .1.3.6.1.4.1.353.5.8.1.1.2.3.1.8

mpcDataAtmAddressTable

table
.1.3.6.1.4.1.353.5.8.1.1.2.4 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpcDataAtmAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpcDataAtmAddressTable' 
A table which shows all the data ATM addresses
associated with  all MPOA Clients.
mpcDataAtmAddressEntry row .1.3.6.1.4.1.353.5.8.1.1.2.4.1
Each row defines one data ATM address associated with
an MPC. NOTE: if an MPC has more than one data ATM
address then there will be another entry which contains
the same mpcIndex subIdentifier, with a different
mpcDat…
Indexes
Column Syntax OID
mpcDataAtmAddress
A data ATM Address which is associated with
an MPOA Client specified by the mpcIndex.
AtmAddr
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.8.1.1.2.4.1.1
mpcDataAtmAddressRowStatus
This object allows creation and deletion of
an MPOA Client's Data ATM Addresses. The
row can be created/deleted by either an NMS
or by the SNMP agent.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.353.5.8.1.1.2.4.1.2

mpcStatisticsTable

table
.1.3.6.1.4.1.353.5.8.1.1.2.5 · 1 row entry · 33 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpcStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpcStatisticsTable' 
A read-only table which contains statistical
information for all MPOA Clients that
this agent manages.
mpcStatisticsEntry row .1.3.6.1.4.1.353.5.8.1.1.2.5.1
Each row in this table contains statistics
for one MPOA Client.
Indexes
No indexes recorded
Column Syntax OID
mpcStatTxMpoaResolveRequests
The number of MPOA Resolve Requests transmitted
by this MPC.

Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.1
mpcStatRxMpoaResolveReplyAcks
The number of positively acknowledged MPC
Resolved Replies received by this MPC with an MPOA
CIE Code of 0x00 (Success).
Discontinuities in the value of this counter can occur at
re-initialization of the management syst…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.2
mpcStatRxMpoaResolveReplyInsufECResources
The number of MPOA Resolution Replies received with
an MPOA CIE Code of 0x81, `Insufficient resources to
accept egress cache entry'.
Discontinuities in the value of this counter can occur
at re-initialization of the man…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.3
mpcStatRxMpoaResolveReplyInsufSCResources
The number of MPOA Resolution Replies received with
an MPOA CIE Code of 0x82, `Insufficient resources to
accept the shortcut'.
Discontinuities in the value of this counter can occur
at re-initialization of the managemen…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.4
mpcStatRxMpoaResolveReplyInsufEitherResources
The number of MPOA Resolution Replies received with
an MPOA CIE Code of 0x83, `Insufficient resources to
accept either shortcut or egress cache entry'.
Discontinuities in the value of this counter can occur
at re-initia…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.5
mpcStatRxMpoaResolveReplyUnsupportedInetProt
The number of MPOA Resolution Replies received with
an MPOA CIE Code of 0x84, `Unsupported Internework
Layer protocol'.
Discontinuities in the value of this counter can occur
at re-initialization of the management syste…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.6
mpcStatRxMpoaResolveReplyUnsupportedMacEncaps
The number of MPOA Resolution Replies received with
an MPOA CIE Code of 0x85, `Unsupported MAC layer encapsulation'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.7
mpcStatRxMpoaResolveReplyUnspecifiedOther
The number of MPOA Resolution Replies received with
an MPOA CIE Code of 0x88, `Unspecified/Other'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initiali…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.8
mpcStatRxMpoaImpRequests
The number of MPOA Cache Imposition Requests received
by this MPC.
Discontinuities in the value of this counter can occur at re-
initialization
of the management system, and/or re-initialization of the MPC,
and at
other…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.9
mpcStatTxMpoaImpReplyAcks
The number of successful MPOA Cache Imposition replies
transmitted by this MPC with an MPOA CIE Code of 0x00
`Success'.
Discontinuities in the value of this counter can occur at re-
initialization
of the management syst…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.10
mpcStatTxMpoaImpReplyInsufECResources
The number of MPOA Cache Imposition Replies transmitted with
an MPOA CIE Code of 0x81, `Insufficient resources to
accept egress cache entry'.
Discontinuities in the value of this counter can occur
at re-initialization o…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.11
mpcStatTxMpoaImpReplyInsufSCResources
The number of MPOA Imposition Replies transmitted with
an MPOA CIE Code of 0x82, `Insufficient resources to
accept shortcut'.
Discontinuities in the value of this counter can occur
at re-initialization of the management…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.12
mpcStatTxMpoaImpReplyInsufEitherResources
The number of MPOA Imposition Replies transmitted with
an MPOA CIE Code of 0x83, `Insufficient resources to
accept either shortcut or egress cache entry'.
Discontinuities in the value of this counter can occur
at re-ini…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.13
mpcStatTxMpoaImpReplyUnsupportedInetProt
The number of MPOA Imposition Replies transmitted with
an MPOA CIE Code of 0x84, `Unsupported Internetwork Layer
protocol'.
Discontinuities in the value of this counter can occur
at re-initialization of the management s…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.14
mpcStatTxMpoaImpReplyUnsupportedMacEncaps
The number of MPOA Imposition Replies transmitted with
an MPOA CIE Code of 0x85, `Unsupported MAC Layer
encapsulation'.
Discontinuities in the value of this counter can occur
at re-initialization of the management syste…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.15
mpcStatTxMpoaImpReplyUnspecifiedOther
The number of MPOA Imposition Replies transmitted with
an MPOA CIE Code of 0x88, `Unspecified/Other'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initi…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.16
mpcStatTxMpoaEgressCachePurgeRequests
The number of MPOA Egress Cache Purge Requests transmitted
by this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at o…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.17
mpcStatRxMpoaEgressCachePurgeReplies
The number of MPOA Egress Cache Purge Replies received by
this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.18
mpcStatRxMpoaKeepAlives
The number of MPOA Keep Alive messages received by this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.19
mpcStatRxMpoaTriggers
The number of MPOA Trigger messages received by this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.20
mpcStatRxMpoaDataPlanePurges
The number of MPOA Data Plane Purge messages received
by this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.21
mpcStatTxMpoaDataPlanePurges
The number of MPOA Data Plane Purge messages transmitted
by this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at oth…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.22
mpcStatRxNhrpPurgeRequests
The number of Purge Requests received by this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indica…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.23
mpcStatTxNhrpPurgeReplies
The number of Purge Replies transmitted by this MPC.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPC, and at other times,
as indi…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.24
mpcStatRxErrUnrecognizedExtensions
The number of Error Indication packets received by
this MPC with the error code `Unrecognized Extension'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-i…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.25
mpcStatRxErrLoopDetecteds
The number of Error Indication packets received by
this MPC with the error code `Loop Detected'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initializa…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.26
mpcStatRxErrProtoAddrUnreachables
The number of Error Indication packets received by this
MPC with the error code `Protocol Address Unreachable'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/o…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.27
mpcStatRxErrProtoErrors
The number of Error Indication packets received by
this MPC with the error code `Protocol Errors'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initiali…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.28
mpcStatRxErrSduSizeExceededs
The number of Error Indication packets received by
this MPC with the error code `SDU Size Exceeded'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initia…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.29
mpcStatRxErrInvalidExtensions
The number of Error Indication packets received by
this MPC with the error code `Invalid Extensions'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initi…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.30
mpcStatRxErrInvalidReplies
The number of Error Indication packets received by
this MPC with the error code `Invalid Reply'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initializa…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.31
mpcStatRxErrAuthenticationFailures
The number of Error Indication packets received by
this MPC with the error code `Authentication Failure'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-i…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.32
mpcStatRxErrHopCountExceededs
The number of Error Indication packets received by
this MPC with the error code `Hop Count Exceeded'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initi…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.5.1.33

mpcProtocolTable

table
.1.3.6.1.4.1.353.5.8.1.1.2.6 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpcProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpcProtocolTable' 
List of protocols, per MPC, for which flow
detection is enabled
mpcProtocolEntry row .1.3.6.1.4.1.353.5.8.1.1.2.6.1
Each row indicates one protocol for which an MPC will
do flow detection. If the LECS was contacted for
configuration information, and the Control Octet of
the MPC-p3 has the value of 0x01, `Enable', then protocol
value…
Indexes
Column Syntax OID
mpcFlowDetectProtocol
The protocol on which flow detection is performed.
If this value was obtained from the LECS then this
value is one of the collection of values returned
in the MPC-p3 parameter.
InternetworkAddrType
Type Values:
0other
1ipV4
2ipV6
3nsap
4hdlc
5bbn1822
6ieee802
7e163
8e164
9f69
10x121
11ipx
12appleTalk
13decnetIV
14banyanVines
15e164WithNsap
 .1.3.6.1.4.1.353.5.8.1.1.2.6.1.1
mpcLECSValue
This object reflects if the current entry is due to
a retrieval from the LECS or not. If this entry is
due to the LECS, then true(1) is the value for this
object, otherwise, false (2).
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.353.5.8.1.1.2.6.1.2
mpcProtocolRowStatus
This object is used by an agent or manager to
create, delete or modify a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.353.5.8.1.1.2.6.1.3

mpcMappingTable

table
.1.3.6.1.4.1.353.5.8.1.1.2.7 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpcMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpcMappingTable' 
A table mapping the `lecIndex' values of
LANE Clients to the `mpcIndex' values of
corresponding MPOA Clients.
mpcMappingEntry row .1.3.6.1.4.1.353.5.8.1.1.2.7.1
Each row defines one lecIndex --> mpcIndex mapping.
The mpcIndex that a lecIndex maps to is not
necessarily unique (an MPC can serve many LECs, however,
a LEC cannot be served by more than one MPC).
Indexes
Column Syntax OID
mpcMappingRowStatus
This object is used by an agent or manager to create, delete
or modify a row in this table.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.353.5.8.1.1.2.7.1.1
mpcMappingIndex
The mpcIndex of the MPOA Client that is performing
flow detection for the LANE Client represented by
the lecIndex.
MpcIndexr/w
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.2.7.1.2

mpcMpsTable

table
.1.3.6.1.4.1.353.5.8.1.1.2.8 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpcMpsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpcMpsTable' 
This is a read-only table which contains
information about the MPSs that these MPCs
know about.
mpcMpsEntry row .1.3.6.1.4.1.353.5.8.1.1.2.8.1
A row created by an MPC. The MPC learns about
an MPS and creates a row.
Indexes
Column Syntax OID
mpcMpsIndex
The MPS's index which is used to identify
a row in this table.
MpsIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.2.8.1.1
mpcMpsAtmAddr
The Control ATM Address of the MPS
AtmAddr
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.8.1.1.2.8.1.2

mpcMpsMacAddressTable

table obsolete
.1.3.6.1.4.1.353.5.8.1.1.2.9 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpcMpsMacAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpcMpsMacAddressTable' 
This is a read-only table which contains
information about all the MPSs' MAC Addresses
that these MPCs know about.
mpcMpsMacAddressEntry row .1.3.6.1.4.1.353.5.8.1.1.2.9.1
A row is created by an MPC. The MPC learns about an
MPS's MAC Address and creates a row.
Indexes
Column Syntax OID
mpcLecIndexobsolete
The lecIndex which represents the associated LEC.
LecIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.2.9.1.1
mpcMpsMacAddressobsolete
The MAC Address of the MPS.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.353.5.8.1.1.2.9.1.2

mpcIngressCacheTable

table
.1.3.6.1.4.1.353.5.8.1.1.2.12 · 1 row entry · 14 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpcIngressCacheTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpcIngressCacheTable' 
This table contains information for MPC Caches for
the ingress MPC.
mpcIngressCacheEntry row .1.3.6.1.4.1.353.5.8.1.1.2.12.1
An entry contains control information
for a row in a MPC's Ingress Cache.
Indexes
Column Syntax OID
mpcIngressCacheDestInetworkAddrType
The type of the destination internetwork layer address.
InternetworkAddrType
Type Values:
0other
1ipV4
2ipV6
3nsap
4hdlc
5bbn1822
6ieee802
7e163
8e164
9f69
10x121
11ipx
12appleTalk
13decnetIV
14banyanVines
15e164WithNsap
 .1.3.6.1.4.1.353.5.8.1.1.2.12.1.1
mpcIngressCacheDestAddr
The destination internetwork layer address for which
this entry is defined.
InternetworkAddr
Type Constraints:
range: 0..60
 .1.3.6.1.4.1.353.5.8.1.1.2.12.1.2
mpcIngressCachePrefixLen
Defines an equivalence class of addresses that match
Prefix Length bit positions of the destination
internetwork layer address.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.2.12.1.3
mpcIngressCacheDestAtmAddr
The Destination ATM Address received in the MPOA
Resolution Reply.
AtmAddr
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.8.1.1.2.12.1.4
mpcIngressCacheSrcAtmAddr
The Source ATM Address for the MPOA Resolution Request.
AtmAddr
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.8.1.1.2.12.1.5
mpcIngressCacheEntryState
The present state of this MPC ingress cache.
The states are:
doesNotExist (1) -- the state is not yet available
inactive (2) -- state exists, entry is not yet
active. For an example, if
…
Enumeration
Enumerated Values:
1doesNotExist
2inactive
3active
4negative
 .1.3.6.1.4.1.353.5.8.1.1.2.12.1.6
mpcIngressCacheEgressCacheTagValid
If the value of this object is true(1), then a valid
Egress Cache Tag is present and the value of the Egress
Cache Tag is in mpcIngressCacheEgressCacheTag. Otherwise,
if this value is false(2), then there was no Egress…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.353.5.8.1.1.2.12.1.7
mpcIngressCacheEgressCacheTag
If a valid Egress Cache Tag is present, then this
object contains the value of that tag. To determine
if this object contains a valid value,
mpcIngressCacheEgressTagValid should be used.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.2.12.1.8
mpcIngressCacheLastNhrpCieCode
The last NHRP CIE code received for this entry. This
value is valid only during the Hold Down period of the
cache entry. This value is undefined otherwise.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.353.5.8.1.1.2.12.1.9
mpcIngressCacheSigErrCode
Error code or Success of the last sinalling request
for this cache entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.2.12.1.10
mpcIngressCacheRetries
The current number of times this MPC has issued a
resolution request since it received a valid reply.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.2.12.1.11
mpcIngressCacheTimeUntilNextResolutionRequest
The amount of time the MPC
must wait before issuing the next resolution request.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.353.5.8.1.1.2.12.1.12
mpcIngressCacheHoldingTime
The time that this MPC's Ingress Cache Entry will remain
valid. If the mpcIngressCacheEntryState is not active
this value will be zero.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.353.5.8.1.1.2.12.1.13
mpcIngressCacheServiceCategory
The service categories supported for this shortcut.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.353.5.8.1.1.2.12.1.14

mpcEgressCacheTable

table
.1.3.6.1.4.1.353.5.8.1.1.2.15 · 1 row entry · 12 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpcEgressCacheTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpcEgressCacheTable' 
This table contains Egress Cache information for
all the MPCs which this agent manages.
mpcEgressCacheEntry row .1.3.6.1.4.1.353.5.8.1.1.2.15.1
An entry in the MPOA Client's Egress Cache table.
Indexes
Column Syntax OID
mpcEgressCacheId
Cache ID Provided by the MPS in the Cache
Imposition Request.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.353.5.8.1.1.2.15.1.1
mpcEgressCacheInetworkAddrType
Type of Internetwork Address in this cache entry.
InternetworkAddrType
Type Values:
0other
1ipV4
2ipV6
3nsap
4hdlc
5bbn1822
6ieee802
7e163
8e164
9f69
10x121
11ipx
12appleTalk
13decnetIV
14banyanVines
15e164WithNsap
 .1.3.6.1.4.1.353.5.8.1.1.2.15.1.2
mpcEgressCacheIDestAddr
The destination internetwork layer address
for which this entry is defined.
InternetworkAddr
Type Constraints:
range: 0..60
 .1.3.6.1.4.1.353.5.8.1.1.2.15.1.3
mpcEgressCachePrefixLen
Defines an equivalence class of addresses that match
Prefix Length bit positions of the destination
internetwork layer address.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.2.15.1.4
mpcEgressCacheEntryState
The present state of this MPC egress cache entry.
The states are:
doesNotExist (1) -- the state is not yet available,
inactive (2) -- state exists, entry is not yet active,
active (3) -- state exists, e…
Enumeration
Enumerated Values:
1doesNotExist
2inactive
3active
4negative
 .1.3.6.1.4.1.353.5.8.1.1.2.15.1.5
mpcEgressCacheEgressCacheTagValid
If the value of this object is true(1), then a valid
Egress Cache Tag is present and the value of the Egress
Cache Tag is in mpcEgressCacheEgressCacheTag. Otherwise,
if this value is false(2), then there was no Egress
…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.353.5.8.1.1.2.15.1.6
mpcEgressCacheEgressCacheTag
If a valid Egress Cache Tag is present, then this
object contains the value of that tag. To determine
if this object contains a valid value,
mpcEgressCacheEgressCacheTagValid should be used.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.2.15.1.7
mpcEgressCacheHoldTime
The remaining time for which this entry is valid.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.353.5.8.1.1.2.15.1.8
mpcEgressCacheDataLinkHeader
The DataLink header that the egress client rebuilds
the original DataLink packet with.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.353.5.8.1.1.2.15.1.9
mpcEgressCacheIngressMpcDataAtmAddr
The Data ATM Address of the ingress MPC that issued
the MPOA Resolution request
AtmAddr
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.8.1.1.2.15.1.10
mpcEgressCacheLecIndex
This is the lecIndex of the LANE Client that this flow
is associated with. This can be used to get the ELAN
name as well as other LANE parameters.
LecIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.2.15.1.11
mpcEgressCacheServiceCategory
This is a bitmap describing the service categories
supported for this shortcut. This value represents
an inclusive OR of the bits:

bit 1 - if rt-VBR is supported,
bit 2 - if nrt-VBR is supported,
bit 4 -…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.353.5.8.1.1.2.15.1.12

mpcMpsMultipleMacAddressTable

table
.1.3.6.1.4.1.353.5.8.1.1.2.16.1 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpcMpsMultipleMacAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpcMpsMultipleMacAddressTable' 
This is a read-only table which contains
information about all the MPSs' MAC Addresses
that these MPCs use during flow detection.
Note that due to the multinetted case an MPC may learn
about more than one MAC address from an MPS,
thus there may be more than one MAC address for the
same MPC - MPS - LecIndex represented in this
Table.  These MacAddresses are differentiated by
the mpcMpsMacAddressIndex.
mpcMpsMultipleMacAddressEntry row .1.3.6.1.4.1.353.5.8.1.1.2.16.1.1
A row is created by an MPC. The MPC learns about a
MPS and the one or more MAC Address of the MPS which
the MPC uses during flow detection. Each row represents
an MPS MAC Address used by an MPC during flow detection.
Indexes
Column Syntax OID
mpcFlowDetectLecIndex
The lecIndex which represents the associated LEC.
LecIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.2.16.1.1.1
mpcMpsMacAddressIndex
This value is used to differentiate MAC Addresses from
the same MPS used by the same MPC during flow detection.
This value should be unique within the scope of this table.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.353.5.8.1.1.2.16.1.1.2
mpcMpsFlowDetectMacAddress
An MPS MAC Address used by an MPC during flow detection.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.353.5.8.1.1.2.16.1.1.3

mpsConfigTable

table
.1.3.6.1.4.1.353.5.8.1.1.3.2 · 1 row entry · 10 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpsConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpsConfigTable' 
The MPOA Server Configuration Table.
This table represents the configuration information for
all MPOA Servers which this agent manages.
mpsConfigEntry row .1.3.6.1.4.1.353.5.8.1.1.3.2.1
MPOA Server Configuration Entry.
Each entry contains configuration information
for one MPOA Server.
Indexes
Column Syntax OID
mpsIndex
A value which uniquely identifies this conceptual
row in the mpsConfigTable. The `mpsNextIndex' object
needs to be used to determine the value of this object.
A row cannot be added, unless the mpsCtrlAtmAddress
is uniq…
MpsIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.3.2.1.1
mpsRowStatus
This object allows creation and deletion of MPOA Servers.
Within each conceptual mpsConfigTable row, objects which are
writable may be modified regardless of the value of
mpsRowStatus. It is not necessary to set a row'…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.353.5.8.1.1.3.2.1.2
mpsConfigMode
Indicates whether this MPS should auto-configure
the next time it is (re-)initialized.
In automatic(1) mode the LECS is contacted and
requests are made for the MPS-p* parameters.
In manual(2) mode, the values of the con…
Enumerationr/w
Enumerated Values:
1automatic
2manual
 .1.3.6.1.4.1.353.5.8.1.1.3.2.1.3
mpsCtrlAtmAddr
The MPS's Control ATM Address. There exists one
Control ATM Address per MPS, therefore, the value
of this entry is unique within the table.
AtmConfigAddrr/w
Type Constraints:
range: 1
range: 8
range: 20
 .1.3.6.1.4.1.353.5.8.1.1.3.2.1.4
mpsKeepAliveTime
MPS-p1 Keep-alive time is max interval between
the MPS sending MPOA Keep-Alives in seconds.
Integer32r/w
Constraints:
range: 1-300
 .1.3.6.1.4.1.353.5.8.1.1.3.2.1.5
mpsKeepAliveLifeTime
MPS-p2 Keep-Alive Lifetime
The length of time an MPC may consider a Keep-Alive
valid in seconds. This value must be at least
three times the mpsKeepAliveTime (MPS-p1).
Integer32r/w
Constraints:
range: 3-1000
 .1.3.6.1.4.1.353.5.8.1.1.3.2.1.6
mpsInitialRetryTime
MPS-p4 is initial value in seconds for the
MPOA retry mechanism.
Integer32r/w
Constraints:
range: 1-300
 .1.3.6.1.4.1.353.5.8.1.1.3.2.1.7
mpsRetryTimeMaximum
MPS-p5 cumulative max value in seconds
for Retry Time (MPS-p4).
Integer32r/w
Constraints:
range: 10-300
 .1.3.6.1.4.1.353.5.8.1.1.3.2.1.8
mpsGiveupTime
MPS-p6 Give Up Time.
Minimum time in seconds to wait before giving up on a
pending resolution request.
Integer32r/w
Constraints:
range: 5-300
 .1.3.6.1.4.1.353.5.8.1.1.3.2.1.9
mpsDefaultHoldingTime
MPS-p7 Default Holding Time in minutes.
The default Holding Time used in NHRP
Resolution Replies. An egress MPS may use
local information to determine a more
appropriate Holding Time.
Integer32r/w
Constraints:
range: 1-120
 .1.3.6.1.4.1.353.5.8.1.1.3.2.1.10

mpsActualTable

table
.1.3.6.1.4.1.353.5.8.1.1.3.3 · 1 row entry · 9 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpsActualTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpsActualTable' 
A read-only table containing identification, status,
and operational information about the MPOA
Servers this agent manages.
mpsActualEntry row .1.3.6.1.4.1.353.5.8.1.1.3.3.1
An entry in the MPS Actual Table.
An entry represents a specific MPOA Server's
status and operation information.
Indexes
No indexes recorded
Column Syntax OID
mpsActualState
This object indicates the current operational
status of the MPOA Server.
Enumeration
Enumerated Values:
1unknown
2initialState
3up
4down
 .1.3.6.1.4.1.353.5.8.1.1.3.3.1.1
mpsDiscontinuityTime
The value of sysUpTime on the most recent occasion at
which any one or more of this MPS's counters
experienced a discontinuity. The relevant counters
are the specific instances associated with this
MPS. If discontinui…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.353.5.8.1.1.3.3.1.2
mpsActualConfigMode
Indicates whether this MPS auto-configured
when it was last (re-)initialized.
Enumeration
Enumerated Values:
1automatic
2manual
 .1.3.6.1.4.1.353.5.8.1.1.3.3.1.3
mpsActualKeepAlive
The maximum amount of time in seconds this MPS waits
between sending MPOA Keep-Alives.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.3.3.1.5
mpsActualKeepAliveLifeTime
The length of time in seconds this MPS
considers a Keep-Alive valid.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.3.3.1.6
mpsActualInitialRetryTime
The actual initial value in seconds for the MPOA
retry mechanism.
Integer32
Constraints:
range: 1-300
 .1.3.6.1.4.1.353.5.8.1.1.3.3.1.7
mpsActualRetryTimeMaximum
The actual cumulative max value in seconds
for Retry Time.
Integer32
Constraints:
range: 30-300
 .1.3.6.1.4.1.353.5.8.1.1.3.3.1.8
mpsActualGiveupTime
Minimum time in seconds that this MPS waits
before giving up on a pending resolution request.
Integer32
Constraints:
range: 5-300
 .1.3.6.1.4.1.353.5.8.1.1.3.3.1.9
mpsActualDefaultHoldingTime
The actual Holding Time in minutes used in
NHRP Resolution Replies.
Integer32
Constraints:
range: 1-120
 .1.3.6.1.4.1.353.5.8.1.1.3.3.1.10

mpsStatisticsTable

table
.1.3.6.1.4.1.353.5.8.1.1.3.4 · 1 row entry · 26 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpsStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpsStatisticsTable' 
This table represents the statistical information
for the MPSs, which this agent manages.
mpsStatisticsEntry row .1.3.6.1.4.1.353.5.8.1.1.3.4.1
Each row in this table contains statistics
for one MPOA server.
Indexes
No indexes recorded
Column Syntax OID
mpsStatRxMpoaResolveRequests
The number of MPOA Resolve Requests received
by this MPS which are translated to NHRP
resolve requests.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-ini…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.1
mpsStatTxMpoaResolveReplyAcks
The number of MPOA Resolve Replies transmitted by this
MPS which contain the MPOA CIE Code of 0x00, `Success'.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.2
mpsStatTxMpoaResolveReplyInsufECResources
The number of MPOA Resolve Replies transmitted by this MPS
which contain the MPOA CIE Code of 0x81, `Insufficient
resources to accept egress cache entry'.
Discontinuities in the value of this counter can occur
at re-ini…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.3
mpsStatTxMpoaResolveReplyInsufSCResources
The number of MPOA Resolve Replies transmitted by this MPS
which contain the MPOA CIE Code of 0x82,
`Insufficient resources to accept shortcut'.
Discontinuities in the value of this counter can occur
at re-initializatio…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.4
mpsStatTxMpoaResolveReplyInsufEitherResources
The number of MPOA Resolve Replies transmitted by this MPS
which contain the MPOA CIE CODE of 0x83, `Insufficient
resources to accept either shortcut or egress cache entry'.
Discontinuities in the value of this counter …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.5
mpsStatTxMpoaResolveReplyUnsupportedInetProt
The number of MPOA Resolve Replies transmitted by this MPS
which contain the MPOA CIE CODE of 0x84, `Unsupported
Internetwork
Layer protocol'.
Discontinuities in the value of this counter can occur
at re-initialization …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.6
mpsStatTxMpoaResolveReplyUnsupportedMacEncaps
The number of MPOA Resolve Replies transmitted by this MPS
which contain the MPOA CIE CODE of 0x85, `Unsupported MAC
layer encapsulation'.
Discontinuities in the value of this counter can occur
at re-initialization of t…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.7
mpsStatTxMpoaResolveReplyUnspecifiedOther
The number of MPOA Resolve Replies transmitted by this MPS
which contain the MPOA CIE CODE of 0x88, `Unspecified/Other'.
Discontinuities in the value of this counter can occur
at re-initialization of the management syst…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.8
mpsStatTxMpoaResolveReplyOther
The number of MPOA Resolve Replies transmitted by this
MPS which are not counted above. NOTE: this would
include NHRP errors.
Discontinuities in the value of this counter can occur
at re-initialization of the manageme…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.9
mpsStatGiveupTimeExpireds
The number of times the MPS Give up Time (MPS-p6)
has expired while waiting for a reply from a
re-originated MPOA resolution request, i.e. a
reply for a translated NHRP resolution request.
Discontinuities in the value o…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.10
mpsStatTxMpoaImpRequests
The number of MPOA Cache Imposition Requests
transmitted by this MPS.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at oth…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.11
mpsStatRxMpoaImpReplyAcks
The number of successful MPOA Cache Imposition Replies
received by this MPS which contain an MPOA CIE Code of 0x00,
`Success'.
Discontinuities in the value of this counter can occur
at re-initialization of the managemen…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.12
mpsStatRxMpoaImpReplyInsufECResources
The number of MPOA Cache Imposition Replies received by
this MPS which contain the MPOA CIE Code of 0x81,
`Insufficient resources to accept egress cache entry'.
Discontinuities in the value of this counter can occur
at …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.13
mpsStatRxMpoaImpReplyInsufSCResources
The number of MPOA Cache Imposition Replies received by
this MPS which contain the MPOA CIE Code of 0x82,
`Insufficient resources to accept shortcut'.
Discontinuities in the value of this counter can occur
at re-initial…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.14
mpsStatRxMpoaImpReplyInsufEitherResources
The number of MPOA Cache Imposition Replies received by
this MPS which contain the MPOA CIE Code of 0x83,
`Insufficient resources to accept either shortcut or
egress cache entry'.
Discontinuities in the value of this co…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.15
mpsStatRxMpoaImpReplyUnsupportedInetProt
The number of MPOA Cache Imposition Replies received by
this MPS which contain the MPOA CIE Code of 0x84,
`Unsupported Internetwork Layer protocol'.
Discontinuities in the value of this counter can occur
at re-initializ…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.16
mpsStatRxMpoaImpReplyUnsupportedMacEncaps
The number of MPOA Cache Imposition Replies received by
this MPS which contain the MPOA CIE Code of 0x85,
`Unsupported MAC layer encapsulation'.
Discontinuities in the value of this counter can occur
at re-initializatio…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.17
mpsStatRxMpoaImpReplyUnspecifiedOther
The number of MPOA Cache Imposition Replies received by
this MPS which contain the MPOA CIE Code of 0x88,
`Unspecified/Other'.
Discontinuities in the value of this counter can occur
at re-initialization of the managemen…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.18
mpsStatRxMpoaImpReplyOther
The number of MPOA Cache Imposition Replies received by
this MPS which are not counted previously. NOTE:
this would include NHRP errors.
Discontinuities in the value of this counter can occur
at re-initialization of th…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.19
mpsStatRxMpoaEgressCachePurgeRequests
The number of MPOA Egress Cache Purges Requests
received by this MPS.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at oth…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.20
mpsStatTxMpoaEgressCachePurgeReplies
The number of MPOA Egress Cache Purge Replies
transmitted by this MPS.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at ot…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.21
mpsStatTxMpoaTriggers
The number of MPOA Trigger messages transmitted by this MPS.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other times,…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.22
mpsStatTxNhrpResolveRequests
Total count of MPOA Resolution Requests received
by the Ingress MPS which were translated to NHRP
Resolution Requests and transmitted to the NHS.
Discontinuities in the value of this counter can occur
at re-initializati…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.23
mpsStatRxNhrpResolveReplies
Total count of NHRP Resolution Replies received
by the Ingress.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS, and at other tim…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.24
mpsStatRxNhrpResolveRequests
Total count of NHRP Resolution Requests received by
the Egress MPS from the NHS.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS,…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.25
mpsStatTxNhrpResolveReplies
Total count of NHRP Resolution Replies transmitted
by the Egress MPS to the NHS.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and/or
re-initialization of the MPS,…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.353.5.8.1.1.3.4.1.26

mpsProtocolTable

table
.1.3.6.1.4.1.353.5.8.1.1.3.5 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpsProtocolTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpsProtocolTable' 
List of protocols, per MPS, for which
MPOA resolution is enabled.
mpsProtocolEntry row .1.3.6.1.4.1.353.5.8.1.1.3.5.1
Each row indicates one protocol for which an MPS
will perform MPOA resolution.
If the LECS was contacted for configuration
information, and the MPS-p3's control octet is set to Enable,
0x01, then protocol values retriev…
Indexes
Column Syntax OID
mpsInternetworkLayerProtocol
MPS-p3 A protocol on which to perform MPOA resolution.
InternetworkAddrType
Type Values:
0other
1ipV4
2ipV6
3nsap
4hdlc
5bbn1822
6ieee802
7e163
8e164
9f69
10x121
11ipx
12appleTalk
13decnetIV
14banyanVines
15e164WithNsap
 .1.3.6.1.4.1.353.5.8.1.1.3.5.1.1
mpsLECSValue
This object reflects if the current entry is due to
a retrieval from the LECS or not. If this entry is
due to the LECS, then true(1) is the value for this object,
otherwise, false (2).
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.353.5.8.1.1.3.5.1.2
mpsProtocolRowStatus
This object allows network managers to enable
resolution for the `mpsInternetworkLayerProtocol'.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.353.5.8.1.1.3.5.1.3

mpsMappingTable

table
.1.3.6.1.4.1.353.5.8.1.1.3.6 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpsMappingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpsMappingTable' 
A table mapping the `lecIndex' values of
LANE Clients to the `mpsIndex' values of
corresponding MPOA Servers.
mpsMappingEntry row .1.3.6.1.4.1.353.5.8.1.1.3.6.1
Each row defines one lecIndex --> mpsIndex mapping.
The mpsIndex that a lecIndex maps to is not
necessarily unique. In other words, there can be
multiple LECs associated with one MPS.
Indexes
Column Syntax OID
mpsMappingRowStatus
Allows creation, enabling/disabling of this row.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.353.5.8.1.1.3.6.1.1
mpsMappingIndex
The mpsMappingIndex of the MPOA Server that is associated with
this LEC. The mpsMappingIndex corresponds to the mpsIndex.
MpsIndexr/w
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.3.6.1.2

mpsIngressCacheTable

table
.1.3.6.1.4.1.353.5.8.1.1.3.7 · 1 row entry · 12 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpsIngressCacheTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpsIngressCacheTable' 
This table tracks all the Ingress Cache information
of the MPSs which this agents manages.
mpsIngressCacheEntry row .1.3.6.1.4.1.353.5.8.1.1.3.7.1
A entry contains parameters and state variables
for a row in a MPS's Ingress Cache.
Indexes
Column Syntax OID
mpsIngressCacheDestInternetworkAddrType
The type of internetwork layer address of the
Destination Address.
InternetworkAddrType
Type Values:
0other
1ipV4
2ipV6
3nsap
4hdlc
5bbn1822
6ieee802
7e163
8e164
9f69
10x121
11ipx
12appleTalk
13decnetIV
14banyanVines
15e164WithNsap
 .1.3.6.1.4.1.353.5.8.1.1.3.7.1.1
mpsIngressCacheDestAddr
The Ingress MPS Destination Internetwork Layer Address.
InternetworkAddr
Type Constraints:
range: 0..60
 .1.3.6.1.4.1.353.5.8.1.1.3.7.1.2
mpsIngressCachePrefixLen
The Prefix Length of the mpsIngressCacheDestAddr.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.3.7.1.3
mpsIngressCacheEntryState
The state of this MPS Ingress cache.
The states are:
doesNotExist (1) -- the state is not yet available
inactive (2) -- state exists, entry is not yet active
For example,if using the Finit…
Enumeration
Enumerated Values:
1doesNotExist
2inactive
3active
4negative
 .1.3.6.1.4.1.353.5.8.1.1.3.7.1.4
mpsIngressCacheSrcInternetworkAddrType
The type of internetwork layer address of the
Source Address.
InternetworkAddrType
Type Values:
0other
1ipV4
2ipV6
3nsap
4hdlc
5bbn1822
6ieee802
7e163
8e164
9f69
10x121
11ipx
12appleTalk
13decnetIV
14banyanVines
15e164WithNsap
 .1.3.6.1.4.1.353.5.8.1.1.3.7.1.5
mpsIngressCacheSrcAddr
The Ingress MPS Source Internetwork Layer Address.
InternetworkAddr
Type Constraints:
range: 0..60
 .1.3.6.1.4.1.353.5.8.1.1.3.7.1.6
mpsIngressCacheSourceMpcCtrlAtmAddr
The ATM Address from the source of this MPOA request.
In other words, the Ingress MPC's Control Atm Address.
AtmAddr
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.8.1.1.3.7.1.7
mpsIngressCacheResolvedAtmAddr
The ATM Address which has been resolved by an Egress MPC.
AtmAddr
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.8.1.1.3.7.1.8
mpsIngressCacheHoldTime
Time interval that this value is valid.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.353.5.8.1.1.3.7.1.9
mpsIngressCacheMpoaRequestId
The request ID contained in the MPOA resolution request
from the local Ingress MPC.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.3.7.1.10
mpsIngressCacheNhrpRequestId
The request ID which this MPS generates to identify the
NHRP resolution request.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.3.7.1.11
mpsIngressCacheServiceCategory
The service categories supported for this shortcut.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.353.5.8.1.1.3.7.1.12

mpsEgressCacheTable

table
.1.3.6.1.4.1.353.5.8.1.1.3.8 · 1 row entry · 14 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpsEgressCacheTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpsEgressCacheTable' 
This table contains information regarding the
Egress MPOA Server Cache Table.
mpsEgressCacheEntry row .1.3.6.1.4.1.353.5.8.1.1.3.8.1
An entry represents an entry in the MPS's Egress
cache Table which keeps track of the state of the
impositions.
Indexes
Column Syntax OID
mpsEgressCacheId
The id which identifies this cache entry.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.353.5.8.1.1.3.8.1.1
mpsEgressCacheDestInternetworkAddrType
The destination protocol address type.
InternetworkAddrType
Type Values:
0other
1ipV4
2ipV6
3nsap
4hdlc
5bbn1822
6ieee802
7e163
8e164
9f69
10x121
11ipx
12appleTalk
13decnetIV
14banyanVines
15e164WithNsap
 .1.3.6.1.4.1.353.5.8.1.1.3.8.1.2
mpsEgressCacheDestAddr
The destination protocol address.
InternetworkAddr
Type Constraints:
range: 0..60
 .1.3.6.1.4.1.353.5.8.1.1.3.8.1.3
mpsEgressCachePrefixLen
The destination prefix length.
Integer32
Constraints:
range: 0-255
 .1.3.6.1.4.1.353.5.8.1.1.3.8.1.4
mpsEgressCacheHoldTime
Time interval that this value is valid.
SNMPv2-TCTimeInterval
Type Constraints:
range: 0..2147483647
Description:
A period of time, measured in units of 0.01 seconds.
 .1.3.6.1.4.1.353.5.8.1.1.3.8.1.5
mpsEgressCacheEntryState
The present states of this MPS egress cache entry.
The states are:
doesNotExist (1) -- the state is not yet available
inactive (2) -- state exists, entry is not yet active
For example,if using the Fi…
Enumeration
Enumerated Values:
1doesNotExist
2inactive
3active
4negative
 .1.3.6.1.4.1.353.5.8.1.1.3.8.1.6
mpsEgressCacheDataLinkHeader
Data-Link Layer Header.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.353.5.8.1.1.3.8.1.7
mpsEgressCacheElanId
The elan id that this Cache Imposition is sent on.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.3.8.1.8
mpsEgressCacheSourceClientAtmAddr
The Ingress NHC's Atm Address used in the
original cache imposition.
AtmAddr
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.8.1.1.3.8.1.9
mpsEgressCacheNhrpRequestId
The request id from the original NHRP Resolution Request,
may be only useful in the Resolving State.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.3.8.1.10
mpsEgressCacheMpoaRequestId
The new request id which is generated for this imposition's
request, may be only useful in the Resolving State.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.3.8.1.11
mpsEgressCacheServiceCategory
The service categories supported for this shortcut.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.353.5.8.1.1.3.8.1.12
mpsEgressCacheNextHopInternetworkAddrType
The NextHop protocol address type.
InternetworkAddrType
Type Values:
0other
1ipV4
2ipV6
3nsap
4hdlc
5bbn1822
6ieee802
7e163
8e164
9f69
10x121
11ipx
12appleTalk
13decnetIV
14banyanVines
15e164WithNsap
 .1.3.6.1.4.1.353.5.8.1.1.3.8.1.13
mpsEgressCacheNextHopAddr
The NextHop protocol address.
InternetworkAddr
Type Constraints:
range: 0..60
 .1.3.6.1.4.1.353.5.8.1.1.3.8.1.14

mpsMpcTable

table
.1.3.6.1.4.1.353.5.8.1.1.3.9 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk mpsMpcTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MPOA-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MPOA-MIB::mpsMpcTable' 
This read-only table contains information about the
MPCs that these MPSs know about.
mpsMpcEntry row .1.3.6.1.4.1.353.5.8.1.1.3.9.1
A row created by an MPS. The MPS learns about the MPC and
creates a row.
Indexes
Column Syntax OID
mpsMpcIndex
The local index for the mpc represented by this entry
MpcIndex
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.353.5.8.1.1.3.9.1.1
mpsMpcCtrlAtmAddr
MPC control ATM address
AtmAddr
Type Constraints:
range: 0
range: 8
range: 20
 .1.3.6.1.4.1.353.5.8.1.1.3.9.1.2