MOXA-CN2600-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
22
Rows
22
Columns
163

opModePortTable

table
.1.3.6.1.4.1.8691.2.11.1.4.1.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk opModePortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::opModePortTable' 
The serial ports' operation mode table.
opModePortEntry row .1.3.6.1.4.1.8691.2.11.1.4.1.1.1.1
The serial port's operation mode entry.
Indexes
Column Syntax OID
portIndex
The serial port index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.1.1.1.1
portApplication
The application of the serial port.
Note that changing this setting may also change the
operation mode.
Enumerationr/w
Enumerated Values:
0disable
1dial-InOut
2terminal
3reverse-Terminal
4device-Control
5redundant-Com
9drdas
11socket
 .1.3.6.1.4.1.8691.2.11.1.4.1.1.1.1.2

deviceControlTable

table
.1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1 · 1 row entry · 6 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk deviceControlTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::deviceControlTable' 
The Device Control application table.
deviceControlEntry row .1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1.1
The Device Control application entry.
Indexes
Column Syntax OID
deviceControlTcpAliveCheck
The TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no TCP…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1.1.1
deviceControlMaxConnection
Max connection is usually used when the user needs
to receive data from different hosts simultaneously.
The factory default is 1. In this case, only one
specific host can access this port of the Terminal Server CN2600
s…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1.1.2
deviceControlIgnoreJammedIp
Previously, when Max connection was set to a value
greater than 1, and the serial device was
transmitting data, if any one of the connected hosts
stopped responding, the serial device would wait
until the data had been …
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1.1.3
deviceControlAllowDriverControl
If Max connection is greater than 1, CN2600 will
ignore driver control commands from all connected
hosts. However, if you set Allow driver control to
YES, control commands will be accepted. Note that
since the Terminal …
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1.1.4
deviceControlConnectionDownRTS
For some applications, serial devices must obtain
the Ethernet link status by reading the RTS signal from the
Terminal Server CN2600 series device server. If this setting is
set to 'always low,' RTS will change its stat…
Enumerationr/w
Enumerated Values:
0always-high
1always-low
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1.1.5
deviceControlConnectionDownDTR
For some applications, serial devices must obtain
the Ethernet link status by reading the DTR signal from the
Terminal Server CN2600 series device server. If this setting is
set to 'goes low,' DTR will change its state …
Enumerationr/w
Enumerated Values:
0always-high
1always-low
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.1.1.1.6

socketTable

table
.1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1 · 1 row entry · 35 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk socketTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::socketTable' 
The Socket application table.
socketEntry row .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1
The Socket application entry.
Indexes
Column Syntax OID
socketTcpAliveCheck
The TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no TCP…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.1
socketInactivityTime
0 ms: TCP connection is not closed when the
serial line is idle.
1-65535 ms: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no serial data activity for the given time…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.2
socketMaxConnection
Max connection is usually used when the user needs
to receive data from different hosts simultaneously.
The factory default is 1. In this case, only one
specific host can access this port of the Terminal Server CN2600
s…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.3
socketIgnoreJammedIp
Previously, when Max connection was set to a value
greater than 1, and the serial device was
transmitting data, if any one of the connected hosts
stopped responding, the serial device would wait
until the data had been …
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.4
socketAllowDriverControl
If Max connection is greater than 1, CN2600 will
ignore driver control commands from all connected
hosts. However, if you set Allow driver control to
YES, control commands will be accepted. Note that
since the Terminal …
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.5
socketTcpPort
The 'TCP port' is the TCP port that the Terminal Server CN2600
series uses to listen to
connections, and that other devices must use to
contact the Terminal Server CN2600 series device server.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.6
socketCmdPort
The 'Command port' is a TCP port used to listen for
IP-Serial Lib commands from the host. In order to
prevent a TCP port conflict with other applications,
the user can set the Command port to another port
if needed. IP…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.7
socketTcpServerConnectionDownRTS
For some applications, serial devices must obtain
the Ethernet link status from the RTS signal sent by the
Terminal Server CN2600 series device server. If this setting is
set to 'goes low,' RTS will change the state to
…
Enumerationr/w
Enumerated Values:
0always-high
1always-low
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.8
socketTcpServerConnectionDownDTR
For some applications, serial devices must obtain
the Ethernet link status from the DTR signal sent by the
Terminal Server CN2600 series device server. If this setting is
set to 'goes low,' DTR will change the state to
…
Enumerationr/w
Enumerated Values:
0always-high
1always-low
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.9
socketTcpClientDestinationAddress1
The Terminal Server CN2600 series can
connect actively to a remote host that
has this IP address.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.10
socketTcpClientDestinationPort1
The Terminal Server CN2600 series can
connect actively to a remote host that has this
TCP port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.11
socketTcpClientDestinationAddress2
The Terminal Server CN2600 series can
connect actively to a remote host that has this IP
address.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.12
socketTcpClientDestinationPort2
The Terminal Server CN2600 series can
connect actively to a remote host that
has this TCP port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.13
socketTcpClientDestinationAddress3
The Terminal Server CN2600 series can
connect actively to a remote host that
has this IP address.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.14
socketTcpClientDestinationPort3
The Terminal Server CN2600 series can
connect actively to a remote host that
has this port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.15
socketTcpClientDestinationAddress4
The Terminal Server CN2600 series can
connect actively to a remote host that
has this IP address.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.16
socketTcpClientDestinationPort4
The Terminal Server CN2600 series can
connect actively to a remote host that
has this port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.17
socketTcpClientDesignatedLocalPort1
The local TCP port used to connect actively to the
remote host.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.18
socketTcpClientDesignatedLocalPort2
The local TCP port used to connect actively to the
remote host.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.19
socketTcpClientDesignatedLocalPort3
The local TCP port used to connect actively to the
remote host.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.20
socketTcpClientDesignatedLocalPort4
The local TCP port used to connect actively to the
remote host.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.21
socketTcpClientConnectionControl
Events that cause the TCP client to drop the
connection.
Enumerationr/w
Enumerated Values:
257startup-None
258anyCharacter-None
260dsrOn-None
264dcdOn-None
514anyCharacter-InactivityTime
1028dsrOn-DSR-Off
2056dcdOn-DCD-Off
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.22
socketUdpDestinationAddress1Begin
The Terminal Server CN2600 series can actively send
UDP packets to remote hosts whose IP
addresses are in the range between this parameter and
socketUdpDestinationAddress1End.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.23
socketUdpDestinationAddress1End
The Terminal Server CN2600 series can actively send
UDP packets to remote hosts whose IP
addresses are in the range between
socketUdpDestinationAddress1Begin and this parameter.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.24
socketUdpDestinationPort1
The Terminal Server CN2600 series can actively send
UDP packets to remote hosts that have this port
number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.25
socketUdpDestinationAddress2Begin
The Terminal Server CN2600 series can actively send
UDP packets to remote hosts whose IP
addresses are in the range between this parameter and
socketUdpDestinationAddress2End.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.26
socketUdpDestinationAddress2End
The Terminal Server CN2600 series can actively send
UDP packets to the remote hosts whose IP
addresses are in the range between
socketUdpDestinationAddress2Begin and this parameter.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.27
socketUdpDestinationPort2
The Terminal Server CN2600 series can actively send
UDP packets to the remote hosts that have this
TCP port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.28
socketUdpDestinationAddress3Begin
The Terminal Server CN2600 series can actively send
UDP packets to remote hosts whose IP
addresses are in the range between this parameter and
socketUdpDestinationAddress3End.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.29
socketUdpDestinationAddress3End
The Terminal Server CN2600 series can actively send
UDP packets to remote hosts whose IP
addresses are in the range between
socketUdpDestinationAddress3Begin and this parameter.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.30
socketUdpDestinationPort3
The Terminal Server CN2600 series can actively send
UDP packets to remote hosts that have this
TCP port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.31
socketUdpDestinationAddress4Begin
The Terminal Server CN2600 series can actively send
UDP packets to remote hosts whose IP
addresses are in the range between this parameter and
socketUdpDestinationAddress4End.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.32
socketUdpDestinationAddress4End
The Terminal Server CN2600 series can actively send
UDP packets to remote hosts whose IP
addresses are in the range between
socketUdpDestinationAddress4Begin and this parameter.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.33
socketUdpDestinationPort4
The Terminal Server CN2600 series can actively send
UDP packets to remote hosts that have this
TCP port number.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.34
socketUdpLocalListenPort
The UDP port that the Terminal Server CN2600 series device
server listens to and that other devices must use
to contact the Terminal Server CN2600 series device server.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.2.1.1.35

redundantComTable

table
.1.3.6.1.4.1.8691.2.11.1.4.1.2.3.1 · 1 row entry · 5 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk redundantComTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::redundantComTable' 
The Redundant COM table.
redundantComEntry row .1.3.6.1.4.1.8691.2.11.1.4.1.2.3.1.1
The Redundant COM entry.
Indexes
Column Syntax OID
redundantComMaxConnection
Max connection is usually used when the user needs
to receive data from different hosts simultaneously.
The factory default is 1. In this case, only one
specific host can access this port of the Terminal Server CN2600
s…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.3.1.1.1
redundantComIgnoreJammedIp
Previously, when Max connection was set to a value
greater than 1, and the serial device was
transmitting data, if any one of the connected hosts
stopped responding, the serial device would wait
until the data had been …
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.3.1.1.2
redundantComAllowDriverControl
If Max connection is greater than 1, CN2600 will
ignore driver control commands from all connected
hosts. However, if you set Allow driver control to
YES, control commands will be accepted. Note that
since the Terminal …
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.3.1.1.3
redundantComConnectionDownRTS
For some applications, serial devices must obtain
the Ethernet link status by reading the RTS signal from the
Terminal Server CN2600 series device server. If this setting is
set to 'always low,' RTS will change its stat…
Enumerationr/w
Enumerated Values:
0always-high
1always-low
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.3.1.1.4
redundantComConnectionDownDTR
For some applications, serial devices must obtain
the Ethernet link status by reading the DTR signal from the
Terminal Server CN2600 series device server. If this setting is
set to 'goes low,' DTR will change its state …
Enumerationr/w
Enumerated Values:
0always-high
1always-low
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.3.1.1.5

drdasTable

table
.1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1 · 1 row entry · 11 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk drdasTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::drdasTable' 
The DRDAS table.
drdasEntry row .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1
The DRDAS entry.
Indexes
Column Syntax OID
drdasTcpAliveCheck
The TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection is idle.
1 to 99 min: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no TCP…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.1
drdasInactivityTime
0 ms: TCP connection is not closed when the
serial line is idle.
1-65535 ms: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no serial data activity for the given time…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.2
drdasIgnoreJammedIp
Previously, when Max connection was set to a value
greater than 1, and the serial device was
transmitting data, if any one of the connected hosts
stopped responding, the serial device would wait
until the data had been …
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.3
drdasPrimaryIpAddress
DRDAS Primary IP Address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.4
drdasBackup1IpAddress
DRDAS Backup 1 IP Address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.5
drdasBackup2IpAddress
DRDAS Backup 2 IP Address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.6
drdasBackup3IpAddress
DRDAS Backup 3 IP Address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.7
drdasTcpPort
The 'TCP port' is the TCP port that the
Terminal Server CN2600 series uses to listen to
connections, and that other devices must use to
contact the Terminal Server CN2600 series device server.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.8
drdasCmdPort
The 'Command port' is a TCP port used to listen for
IP-Serial Lib commands from the host. In order to
prevent a TCP port conflict with other applications,
the user can set the Command port to another port
if needed. IP…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.9
drdasConnectionDownRTS
For some applications, serial devices must obtain
the Ethernet link status by reading the RTS signal from the
Terminal Server CN2600 series device server. If this setting is
set to 'always low,' RTS will change its stat…
Enumerationr/w
Enumerated Values:
0always-high
1always-low
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.10
drdasConnectionDownDTR
For some applications, serial devices must obtain
the Ethernet link status by reading the DTR signal from the
Terminal Server CN2600 series device server. If this setting is
set to 'goes low,' DTR will change its state …
Enumerationr/w
Enumerated Values:
0always-high
1always-low
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.4.1.1.11

terminalTable

table
.1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1 · 1 row entry · 17 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk terminalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::terminalTable' 
The Terminal Application table.
terminalEntry row .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1
The Terminal Application entry.
Indexes
Column Syntax OID
terminalTcpAliveCheck
The TCP alive check time.
0 min: TCP connection will not be closed if the
TCP connection becomes idle.
1 to 99 min: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.1
terminalInactivityTime
0 min: TCP connection will not be closed if the
serial line becomes idle.
0-99 min: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no serial data activity for the gi…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.2
terminalAutoLinkProtocol
If Auto-Link protocol is set to 'None,' the
Terminal Server CN2600 series will not connect to the
host automatically. If Auto-Link protocol is set to
'Telnet,' the Terminal Server CN2600 series will
connect to the host …
Enumerationr/w
Enumerated Values:
0none
1telnet
2rlogin
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.3
terminalPrimaryHostAddress
If specified, designates a 'permanent' host to
which the terminal will always be connected.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-40
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.4
terminalSecondHostAddress
If specified, designates a 'permanent' host to
which the terminal will always be connected.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-40
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.5
terminalTelnetTcpPort
By default, the Telnet TCP port number is set to
23, which is the default TCP port number for Telnet.
If you need to telnet to this Terminal Server CN2600 series
device server's serial port, set the Telnet TCP port
to a…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.6
terminalType
Defines the terminal type for outgoing connections.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-8
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.7
terminalMaxSessions
Configure the max. number of sessions.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.8
terminalChangeSession
Defines the control character used to change the terminal
session.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-2
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.9
terminalQuit
Defines the control character used to quit a terminal
session.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-2
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.10
terminalBreak
Defines the control character used to send a Telnet
BREAK message.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-2
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.11
terminalInterrupt
Defines the control character used to send a Telnet
INTERRUPT message.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-2
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.12
terminalAuthenticationType
The terminal authentication type.
Enumerationr/w
Enumerated Values:
0none
1local
2radius
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.13
terminalAutoLoginPrompt
The prompt string for the automatic login ID. When the
Terminal Server CN2600 series receives this string
from a remote telnet/rlogin server, it will
automatically reply with the user ID.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.14
terminalPasswordPrompt
The prompt string for the automatic login password.
When the Terminal Server CN2600 series receives this
string from a remote telnet/rlogin server, it will
automatically reply with the user password.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.15
terminalLoginUserName
Terminal login ID for automatic login.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.16
terminalLoginPassword
Terminal login password for automatic login.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.5.1.1.17

reverseTerminalTable

table
.1.3.6.1.4.1.8691.2.11.1.4.1.2.6.1 · 1 row entry · 5 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk reverseTerminalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::reverseTerminalTable' 
The Reverse Terminal Application table.
reverseTerminalEntry row .1.3.6.1.4.1.8691.2.11.1.4.1.2.6.1.1
The Reverse Terminal Application entry.
Indexes
Column Syntax OID
reverseTerminalTcpAliveCheck
The TCP alive check time.
0 min: TCP connection will not be closed when the
TCP connection becomes idle.
1 to 99 min: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
n…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.6.1.1.1
reverseTerminalInactivityTime
0 min: TCP connection will not be closed if the
serial line becomes idle.
0-99 min: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no serial data activity for the gi…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.6.1.1.2
reverseTerminalTcpPort
Each of the Terminal Server CN2600 series device server's serial
ports are mapped to a TCP port.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.6.1.1.3
reverseTerminalAuthenticationType
The reverse terminal authentication type.
Enumerationr/w
Enumerated Values:
0none
1local
2radius
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.6.1.1.4
reverseTerminalMapKeys
If data received through Terminal Server CN2600 series device
server's Ethernet port is sent using the 'enter'
command, the data will be transmitted out through
the serial port with an added
1. 'carriage return + line f…
Enumerationr/w
Enumerated Values:
0cr-lf
1cr
2lf
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.6.1.1.5

dialTable

table
.1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1 · 1 row entry · 14 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk dialTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::dialTable' 
The Dial In/Out table.
dialEntry row .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1
The Dial In/Out entry.
Indexes
Column Syntax OID
dialTERMBINMode
Select Yes to enable a Binary Terminal connection.
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.1
dialPPPDMode
Select Yes to enable a PPPD connection.
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.2
dialSLIPDMode
Select Yes to enable a SLIPD Terminal connection.
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.3
dialAuthType
The dial in/out authentication type.
Enumerationr/w
Enumerated Values:
0none
1local
2radius
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.4
dialDisconnectBy
If this field is set to 'dcd-off,' the connection
will be disconnected when the DCD signal is off.
If this field is set to 'dsr-off,' the connection
will be disconnected when the DSR signal is off.
Enumerationr/w
Enumerated Values:
0none
2dcd-off
4dsr-off
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.5
dialDestinationIpAddress
Destination IP address is the IP address of the
remote dial-in/dial-out server.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.6
dialSourceIpAddress
Source IP address is IP address of this serial
port. The Terminal Server CN2600 series will
automatically assign an IP address for the port.
We recommend leaving this field blank.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.7
dialIpNetmask
The IP netmask used for dial-in/dial-out networks
(PPP or SLIP).
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.8
dialTcpIpCompression
Depends on whether the remote user's application
requests compression.
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.9
dialInactivityTime
0 ms: TCP connection will not be closed if the
serial line becomes idle.
1-65535 ms: The Terminal Server CN2600 series device server
automatically closes the TCP connection if there is
no serial data activity for the g…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.10
dialLinkQualityReport
Choose YES if you are using software to collect Link quality
information.
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.11
dialOutgoingPAPID
Dial-out user ID account.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.12
dialPAPPassword
Dial-out user password.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.13
dialIncomingPAPCheck
The Dial in/out incoming PAP check type.
Enumerationr/w
Enumerated Values:
0none
1local
2radius
 .1.3.6.1.4.1.8691.2.11.1.4.1.2.7.1.1.14

dataPackingPortTable

table
.1.3.6.1.4.1.8691.2.11.1.4.1.3.1 · 1 row entry · 7 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk dataPackingPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::dataPackingPortTable' 
The Data Packing table.
dataPackingPortEntry row .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1
The Data Packing entry.
Indexes
Column Syntax OID
portPacketLength
If the value is 0, the Delimiter Process will be
used, regardless of the length of the data
packet. If the data length (in bytes) matches the
configured value, the data will be forced out. The
data length can be configu…
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1.1
portDelimiter1Enable
Enable the first delimiter character.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1.2
portDelimiter1
The first delimiter character, in hex decimal.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-2
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1.3
portDelimiter2Enable
Enable the second delimiter character.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1.4
portDelimiter2
The second delimiter character, in hex decimal.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-2
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1.5
portDelimiterProcess
'delimiterAddOne' or 'delimiterAddTwo': The data
will be transmitted when an additional byte (for
'delimiterAddOne'), or an additional 2 bytes (for
'delimiterAddTwo') of data is received after
receiving the Delimiter.
'…
Enumerationr/w
Enumerated Values:
1doNothing
2delimiterAddOne
4delimiterAddTwo
8stripDelimiter
 .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1.6
portForceTransmit
0: Disable the force transmit timeout.
1 to 65535: Forces the Terminal Server CN2600 series device
server's TCP/IP protocol software to try to pack
serial data received during the specified time into
the same data frame.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.1.3.1.1.7

comParamPortTable

table
.1.3.6.1.4.1.8691.2.11.1.4.2.1 · 1 row entry · 9 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk comParamPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::comParamPortTable' 
The Communication Parameters table.
comParamPortEntry row .1.3.6.1.4.1.8691.2.11.1.4.2.1.1
The Communication Parameters entry.
Indexes
Column Syntax OID
portAlias
Port alias is included to allow easy identification of
the serial devices that are connected to Terminal Server CN2600
series device server's serial port.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.1
portInterface
The serial interface that the port works on.
Enumerationr/w
Enumerated Values:
0rs-232
1rs-422
2rs-485-2-wire
3rs-485-4-wire
 .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.2
portBaudRate
The port's speed in bits per second. You can choose
a standard baud rate by indexing.
Enumerationr/w
Enumerated Values:
0b50
1b75
2b110
3b134
4b150
5b300
6b600
7b1200
8b1800
9b2400
10b4800
11b7200
12b9600
13b19200
14b38400
15b57600
16b115200
17b230400
18b460800
19b921600
 .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.3
portBaudRateManual
The port's speed in bits per second. You can
specify a baud rate manually.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.4
portDataBits
The number of bits in a character for the port.
Enumerationr/w
Enumerated Values:
0bits-5
1bits-6
2bits-7
3bits-8
 .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.5
portStopBits
The number of stop bits for the port.
Enumerationr/w
Enumerated Values:
0bits-1
1bits-1dot5
2bits-2
 .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.6
portParity
The parity bit for the port.
Enumerationr/w
Enumerated Values:
0none
1odd
2even
3mark
4space
 .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.7
portFlowControl
The flow-control method for the port.
Enumerationr/w
Enumerated Values:
0none
1rts-cts
2xon-xoff
3dtr-dsr
 .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.8
portFIFO
Enable or disable the port's FIFO.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.11.1.4.2.1.1.9

dataBufferingPortTable

table
.1.3.6.1.4.1.8691.2.11.1.4.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk dataBufferingPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::dataBufferingPortTable' 
The Data Buffering/Log table.
dataBufferingPortEntry row .1.3.6.1.4.1.8691.2.11.1.4.3.1.1
The Data Buffering/Log entry.
Indexes
Column Syntax OID
portBufferingEnable
Enable off-line port buffering.
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.2.11.1.4.3.1.1.1
portSerialDataLoggingEnable
Enable or disable serial data logging for the port.
Enumerationr/w
Enumerated Values:
0no
1yes
 .1.3.6.1.4.1.8691.2.11.1.4.3.1.1.2

modemSettingsPortTable

table
.1.3.6.1.4.1.8691.2.11.1.4.4.1 · 1 row entry · 4 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk modemSettingsPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::modemSettingsPortTable' 
The Modem Settings table.
modemSettingsPortEntry row .1.3.6.1.4.1.8691.2.11.1.4.4.1.1
The Modem Settings entry.
Indexes
Column Syntax OID
portEnableModem
Enable or disable modem for this port.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.11.1.4.4.1.1.1
portInitialString
Set the modem's initial string to establish the
connection. E.g., 'AT&S0=1' for auto-answer.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-24
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.4.1.1.2
portDialUp
Set the modem's dial-up AT command string.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-8
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.4.1.1.3
portPhoneNumber
Set the number used to dial out.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.4.4.1.1.4

accessibleIpListTable

table
.1.3.6.1.4.1.8691.2.11.1.5.1.1.2 · 1 row entry · 4 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk accessibleIpListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::accessibleIpListTable' 
Accessible IP List table.
accessibleIpListEntry row .1.3.6.1.4.1.8691.2.11.1.5.1.1.2.1
Accessible IP List entry.
Indexes
Column Syntax OID
accessibleIpListIndex
Accessible IP List index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.5.1.1.2.1.1
activeAccessibleIpList
Enable or disable this accessible IP entry.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.11.1.5.1.1.2.1.2
accessibleIpListAddress
Accessible IP address. This value can be the IP address of a
single host if the netmask is set to '255.255.255.255,'
or it can be a network address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.5.1.1.2.1.3
accessibleIpListNetmask
Accessible IP address netmask. The IP address and
netmask are used to specify a group of remote hosts.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.5.1.1.2.1.4

hostTableTable

table
.1.3.6.1.4.1.8691.2.11.1.5.1.4.1 · 1 row entry · 3 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk hostTableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::hostTableTable' 
Host Table.
hostTableEntry row .1.3.6.1.4.1.8691.2.11.1.5.1.4.1.1
Host Table entry.
Indexes
Column Syntax OID
hostTableIndex
The Host Table index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.5.1.4.1.1.1
hostName
The host name of the host table entry.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.5.1.4.1.1.2
hostIpAddress
Related IP address of the host table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.5.1.4.1.1.3

routeTableTable

table
.1.3.6.1.4.1.8691.2.11.1.5.1.5.1 · 1 row entry · 6 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk routeTableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::routeTableTable' 
Route Table.
routeTableEntry row .1.3.6.1.4.1.8691.2.11.1.5.1.5.1.1
Route Table entry.
Indexes
Column Syntax OID
routeTableIndex
The Route Table index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.5.1.5.1.1.1
gatewayRouteTable
The gateway property of the route table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.5.1.5.1.1.2
destinationRouteTable
The destination IP address of the route table entry.
This value can be the IP address of a single host if
the netmask set to
'255.255.255.255,' or it can be a network address.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.5.1.5.1.1.3
netmaskRouteTable
The destination netmask of the route table entry.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.5.1.5.1.1.4
metricRouteTable
The routing metric for this route. The semantics of
this metric are determined by the routing-protocol.
Normally, it represents the cost for the destination.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.5.1.5.1.1.5
interfaceRouteTable
The value that identifies the local interface
through which the next hop of this route should be
reached.
Enumerationr/w
Enumerated Values:
0port1
1port2
2port3
3port4
4port5
5port6
6port7
7port8
8port9
9port10
10port11
11port12
12port13
13port14
14port15
15port16
256lan1
257lan2
 .1.3.6.1.4.1.8691.2.11.1.5.1.5.1.1.6

userTableTable

table
.1.3.6.1.4.1.8691.2.11.1.5.1.6.1 · 1 row entry · 4 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk userTableTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::userTableTable' 
User Table.
userTableEntry row .1.3.6.1.4.1.8691.2.11.1.5.1.6.1.1
User Table entry.
Indexes
Column Syntax OID
userTableIndex
The User Table index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.5.1.6.1.1.1
userNameUserTable
The user name of this entry.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.5.1.6.1.1.2
passwordUserTable
The password of this user entry.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.5.1.6.1.1.3
phoneNumberUserTable
The phone number of this user entry.
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-16
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.5.1.6.1.1.4

portEventSettingsTable

table
.1.3.6.1.4.1.8691.2.11.1.5.2.2.1 · 1 row entry · 4 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk portEventSettingsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::portEventSettingsTable' 
Port Event Settings Table.
portEventSettingsEntry row .1.3.6.1.4.1.8691.2.11.1.5.2.2.1.1
Port Event Settings entry.
Indexes
Column Syntax OID
mailDCDchange
A change in the DCD (Data Carrier Detect) signal
indicates that the modem connection status has
changed. For example, if the DCD signal changes to
low, it indicates that the connection line is down.
When the DCD signal …
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.11.1.5.2.2.1.1.1
trapDCDchange
A change in the DCD (Data Carrier Detect) signal
indicates that the modem connection status has
changed. For example, if the DCD signal changes to
low, it indicates that the connection line is down.
When the DCD signal …
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.11.1.5.2.2.1.1.2
mailDSRchange
A change in the DSR (Data Set Ready) signal
indicates that the data communication equipment is
powered off. For example, if the DSR signal changes
to low, it indicates that the data communication
equipment is powered do…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.11.1.5.2.2.1.1.3
trapDSRchange
A change in the DSR (Data Set Ready) signal
indicates that the data communication equipment is
powered off. For example, if the DSR signal changes
to low, it indicates that the data communication
equipment is powered do…
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.11.1.5.2.2.1.1.4

monitorRemoteIpTable

table
.1.3.6.1.4.1.8691.2.11.1.6.1.1 · 1 row entry · 2 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk monitorRemoteIpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::monitorRemoteIpTable' 
Serial to Network Connections Remote IP table.
monitorRemoteIpEntry row .1.3.6.1.4.1.8691.2.11.1.6.1.1.1
Serial to Network Connections Remote IP entry.
Indexes
Column Syntax OID
remoteIpIndex
Serial to Network Connections Remote IP index.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.6.1.1.1.1
monitorRemoteIp
The remote IP currently connecting to this port.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.8691.2.11.1.6.1.1.1.2

monitorSerialPortStatusTable

table
.1.3.6.1.4.1.8691.2.11.1.6.2.1 · 1 row entry · 9 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk monitorSerialPortStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::monitorSerialPortStatusTable' 
Serial Port Status table.
monitorSerialPortStatusEntry row .1.3.6.1.4.1.8691.2.11.1.6.2.1.1
Serial Port Status entry.
Indexes
Column Syntax OID
monitorTxCount
View the number of bytes transmitted from the port
since the last time the port was initialized.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.1
monitorRxCount
View the number of bytes received by the port since
the last time the port was initialized.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.2
monitorTxTotalCount
View the number of bytes transmitted from the port
since the last time the system was initialized.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.3
monitorRxTotalCount
View the number of bytes received by the port since
the last time the system was initialized.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.4
monitorDSR
View the current DSR status of this port.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.5
monitorDTR
View the current DTR status of this port.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.6
monitorRTS
View the current RTS status of this port.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.7
monitorCTS
View the current CTS status of this port.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.8
monitorDCD
View the current DCD status of this port.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.2.11.1.6.2.1.1.9

monitorSerialPortErrorCountTable

table
.1.3.6.1.4.1.8691.2.11.1.6.3.1 · 1 row entry · 4 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk monitorSerialPortErrorCountTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::monitorSerialPortErrorCountTable' 
Serial Port Error Count table.
monitorSerialPortErrorCountEntry row .1.3.6.1.4.1.8691.2.11.1.6.3.1.1
Serial Port Error Count entry.
Indexes
Column Syntax OID
monitorErrorCountFrame
View the number of 'Frame' errors for this port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.6.3.1.1.1
monitorErrorCountParity
View the number of 'Parity' errors for this port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.6.3.1.1.2
monitorErrorCountOverrun
View the number of 'Overrun' errors for this port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.6.3.1.1.3
monitorErrorCountBreak
View the number of 'Break' errors for this port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.6.3.1.1.4

monitorSerialPortSettingsTable

table
.1.3.6.1.4.1.8691.2.11.1.6.4.1 · 1 row entry · 9 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk monitorSerialPortSettingsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::monitorSerialPortSettingsTable' 
Serial Port Settings table.
monitorSerialPortSettingsEntry row .1.3.6.1.4.1.8691.2.11.1.6.4.1.1
Serial Port Settings entry.
Indexes
Column Syntax OID
monitorBaudRate
View the current baudrate of the port.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.1
monitorDataBits
View the number of bits per byte for the port.
Enumeration
Enumerated Values:
0bits-5
1bits-6
2bits-7
3bits-8
 .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.2
monitorStopBits
View the number of stop bits for the port.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.3
monitorParity
View the parity bit for the port.
Enumeration
Enumerated Values:
0none
8odd
24even
40mark
56space
 .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.4
monitorRTSCTSFlowControl
View if the port is using RTS/CTS flow control.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.5
monitorXONXOFFFlowControl
View if the port is using XON/XOFF flow control.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.6
monitorDTRDSRFlowControl
View if the port is using DTR/DSR flow control.
Enumeration
Enumerated Values:
0off
1on
 .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.7
monitorFIFO
View FIFO status of this port.
Enumeration
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.8
monitorInterface
View the serial interface that the port is using.
Enumeration
Enumerated Values:
0rs-232
1rs-422
2rs-485-2-wire
3rs-485-4-wire
 .1.3.6.1.4.1.8691.2.11.1.6.4.1.1.9

monitorSerialPortBufferingTable

table
.1.3.6.1.4.1.8691.2.11.1.6.5.1 · 1 row entry · 1 columns
Open in standard view
Uses the moxa variant from /opt/observium/mibs/moxa.
Command help
Walk monitorSerialPortBufferingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'MOXA-CN2600-MIB' -M '/opt/observium/mibs/moxa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'MOXA-CN2600-MIB::monitorSerialPortBufferingTable' 
Serial Port Buffering table.
monitorSerialPortBufferingEntry row .1.3.6.1.4.1.8691.2.11.1.6.5.1.1
Serial Port Settings entry.
Indexes
Column Syntax OID
monitorBuffering
View length of buffered data for the port. The length unit is byte.
Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.8691.2.11.1.6.5.1.1.1