LUM-IFOTN-MIB Table View

The optical channel transport unit (otu) group contains infor-
mation and configuration for the Otu layer objects.

ifOtnOtuEntry row .1.3.6.1.4.1.8708.2.50.2.2.1.1

An entry in the ifOtn otu list.

Indexes

ifOtnOtuIndex

Column	Syntax	OID
ifOtnOtuIndex An index assigned to each entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.50.2.2.1.1.1
ifOtnOtuName The management name of the otn otu, for example 'otu:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers.	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.50.2.2.1.1.2
ifOtnOtuConnIfBasicIfIndex An index that describes to which index in ifBasicIf table this object is related.	LUM-TCUnsigned32WithNA Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.50.2.2.1.1.3
ifOtnOtuTxSignalStatus The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.50.2.2.1.1.4
ifOtnOtuRxSignalStatus The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.50.2.2.1.1.5
ifOtnOtuLossOfFrame Loss of frame (LOF). Reference: 6.2.5.1 G.798 alarm: An OTU frame cannot be located. ok: An OTU frame can be located.	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.2.1.1.6
ifOtnOtuRxAlarmIndicationSignal Rx Alarm indication signal (AIS). Indicates if alarm indication signal (AIS) alarm exists or not in receiving direction. Reference: 16.4 G.709, 6.2, 6.3.3 G.798 alarm: An AI…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.2.1.1.7
ifOtnOtuLossOfMultiframe Loss of multiframe (LOM). Indicates loss of multiframe. Reference: 6.2.5.2 G.798 A: Loss of multiframe is active. D: Loss of multiframe inactive.	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.2.1.1.8
ifOtnOtuUpPortId Internal port reference for traffic unit.	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.8708.2.50.2.2.1.1.9
ifOtnOtuCLossOfFrame Loss of frame (LOF). Reference: 6.2.5.1 G.798 alarm: An OTUC frame cannot be located. ok: An OTUC frame can be located.	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.2.1.1.10
ifOtnOtuCRxAlarmIndicationSignal Rx Alarm indication signal (AIS). Indicates if alarm indication signal (AIS) alarm exists or not in receiving direction. Reference: 16.4 G.709, 6.2, 6.3.3 G.798 alarm: An AI…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.2.1.1.11
ifOtnOtuCLossOfMultiframe Loss of multiframe (LOM). Indicates loss of multiframe. Reference: 6.2.5.2 G.798 A: Loss of multiframe is active. D: Loss of multiframe inactive.	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.2.1.1.12

The optical channel data unit (odu) group contains information
and configuration for the Odu layer objects.

ifOtnOduEntry row .1.3.6.1.4.1.8708.2.50.2.3.1.1

An entry in the ifOtn odu list.

Indexes

ifOtnOduIndex

Column	Syntax	OID
ifOtnOduIndex An index assigned to each entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.50.2.3.1.1.1
ifOtnOduName The management name of the otn odu, for example 'odu:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers.	LUM-TCMgmtNameStringr/w Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.50.2.3.1.1.2
ifOtnOduConnIfBasicIfIndex An index that describes to which index in ifBasicIf table this object is related.	LUM-TCUnsigned32WithNAr/w Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.50.2.3.1.1.3
ifOtnOduGcc1Terminated Set if GCC1 should be terminated or not. true - GCC1 should be terminated false - GCC1 should not be terminated	LUM-TCTruthValueWithNA Type Values: 0 true 1 false 2147483646 notAvailable 2147483647 notApplicable Description: Defines a value that can be true, false or not available true - The condition is false false - The condition is not true notAvailable (2147483646) is used when attribute is …	.1.3.6.1.4.1.8708.2.50.2.3.1.1.4
ifOtnOduGcc2Terminated Set if GCC2 should be terminated or not. true - GCC2 should be terminated false - GCC2 should not be terminated	LUM-TCTruthValueWithNA Type Values: 0 true 1 false 2147483646 notAvailable 2147483647 notApplicable Description: Defines a value that can be true, false or not available true - The condition is false false - The condition is not true notAvailable (2147483646) is used when attribute is …	.1.3.6.1.4.1.8708.2.50.2.3.1.1.5
ifOtnOduUsedTcms This attribute indicates which ODU related TCMs that has been created. This is a bit-mask, where 0x00000000 means No TCM 0x00000001 means tcm1 0x00000010 means tcm2 ... 0x00100000…	LUM-TCUnsigned32WithNAr/w Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.50.2.3.1.1.6
ifOtnOduTxSignalStatus The state for outgoing (TX) signal of the interface. This is reflecting the signalStatus of the OTN PM object and any terminated TCMs. down - A major fault has occurred. degraded - The sign…	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.50.2.3.1.1.7
ifOtnOduRxSignalStatus The state for outgoing (RX) signal of the interface. This is reflecting the signalStatus of the OTN PM object and any terminated TCMs. down - A major fault has occurred. degraded - The sign…	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.50.2.3.1.1.8
ifOtnOduType The odu type.	Enumerationr/w Enumerated Values: 1 unused 2 odu0 3 odu1 4 odu2 5 odu3 6 odu4 7 oduFlex 8 oduJ2 9 odu2e 10 oduC2 11 oduC4 2147483647 notApplicable	.1.3.6.1.4.1.8708.2.50.2.3.1.1.9
ifOtnOduParentOduIndex An index that describes to which index in ifOtnOduIf table this SubOdu object is related.	LUM-TCUnsigned32WithNAr/w Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.50.2.3.1.1.10

The optical channel payload unit (opu) group contains information
and configuration for the Opu layer objects.

ifOtnOpuEntry row .1.3.6.1.4.1.8708.2.50.2.4.1.1

An entry in the ifOtn opu list.

Indexes

ifOtnOpuIndex

Column	Syntax	OID
ifOtnOpuIndex An index assigned to each entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.50.2.4.1.1.1
ifOtnOpuName The management name of the otn opu, for example 'opu:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers.	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.50.2.4.1.1.2
ifOtnOpuConnIfBasicIfIndex An index that describes to which index in ifBasicIf table this object is related.	LUM-TCUnsigned32WithNA Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.50.2.4.1.1.3
ifOtnOpuTxSignalStatus The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.50.2.4.1.1.4
ifOtnOpuRxSignalStatus The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.50.2.4.1.1.5
ifOtnOpuTxClientMaintenanceIndication Tx generic alarm indication signal (generic AIS). Indicates if client maintenance signal (PN11) exists or not. alarm: A client maintenance signal is active. ok: Client mainte…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.4.1.1.6
ifOtnOpuTxClientSignalFail Tx Client signal fail (CSF). Indicates if insignal in remote end is failed or not. alarm: Remote end client is faulty. ok: Remote end client is OK. Reference: …	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.4.1.1.7
ifOtnOpuRxPayloadMismatch Rx Payload mismatch (PLM). Monitored overhead: OPUk-PLM Direction: Received from the associated physical interface and, unless the ODUk is terminated, the PLM is sent towards the…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.4.1.1.8
ifOtnOpuTxPayloadMismatch Tx Payload mismatch (PLM). Monitored overhead: OPUk-PLM Direction: Received from the board-internal G.805 Matrix and, if applicable, sent towards the physical interface. Refe…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.4.1.1.9
ifOtnOpuLossOfOpuMultiFrameIdentifier Rx Loss of OPU Multi-frame identifier (LOOMFI). Monitored overhead: OPU4 Multi-Frame Identifier Direction: OPU4 Rx. If the expected 80-frame identifier goes out of expected sequence for a p…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.4.1.1.10
ifOtnOpuRxClientMaintenanceIndication Rx generic alarm indication signal (generic AIS). Indicates if client maintenance signal (PN11) exists or not. alarm: A client maintenance signal is active. ok: Client mainte…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.4.1.1.11
ifOtnOpuConnOduIndex An index that describes to which index in Odu table this object is related.	LUM-TCUnsigned32WithNA Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.50.2.4.1.1.12
ifOtnOpuCRxPayloadMismatch Rx Payload mismatch (PLM). Monitored overhead: OPUCn-PLM Direction: Received from the associated physical interface and, unless the ODUC is terminated, the PLM is sent towards th…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.4.1.1.13

The optical channel payload unit (tp) group contains information
and configuration for the Tp layer objects.

ifOtnTpEntry row .1.3.6.1.4.1.8708.2.50.2.5.1.1

An entry in the ifOtn tp list.

Indexes

ifOtnTpIndex

Column	Syntax	OID
ifOtnTpIndex An index assigned to each entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.50.2.5.1.1.1
ifOtnTpName The management name of the otn tp, for example 'tp:1:2:1', where the first number indicates subrack, the second slot number and the third is the tributary port number.	LUM-TCMgmtNameStringr/w Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.50.2.5.1.1.2
ifOtnTpConnIfBasicIfIndex An index that describes to which index in the ifBasicIf table this object is related.	LUM-TCUnsigned32WithNAr/w Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.50.2.5.1.1.3
ifOtnTpUsedTribSlots The number of tributary slots occupied by this tributary port	LUM-TCUnsigned32WithNA Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.50.2.5.1.1.4
ifOtnTpTribPortId Tributary port id.	LUM-TCUnsigned32WithNAr/w Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.50.2.5.1.1.5
ifOtnTpRxMultiplexStructureIdentifierMismatch Rx Multiplex structure identifier mismatch (MSIM). Indicates received MSI is not equal to expected MSI. alarm: The MSIM shall be declared for the ODU tributary port if the received M…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.5.1.1.6
ifOtnTpTxSignalStatus The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.50.2.5.1.1.7
ifOtnTpRxSignalStatus The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.50.2.5.1.1.8
ifOtnTpXcRefOduIndex An index that describes to which index in ifOtnOduIf table this TP object is contained in.	LUM-TCUnsigned32WithNAr/w Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.50.2.5.1.1.9
ifOtnTpTribSlotMask Tributary slot mask string Format: '<bit-mask>'	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.8708.2.50.2.5.1.1.10
ifOtnTpTribSlotView Tributary slots	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.8708.2.50.2.5.1.1.11
ifOtnTpNotAvailableForUse The ifOtnTpTable is statically populated with entries that may or may not be available for use depending on other configuration items. This attribute states whether the tributary port object is actually possible to allo…	LUM-TCTruthValueWithNA Type Values: 0 true 1 false 2147483646 notAvailable 2147483647 notApplicable Description: Defines a value that can be true, false or not available true - The condition is false false - The condition is not true notAvailable (2147483646) is used when attribute is …	.1.3.6.1.4.1.8708.2.50.2.5.1.1.12

The Open Roadam multi-frame structure format (Flexo) group contains infor-
mation and configuration for the flexO layer objects.

ifOtnFlexoEntry row .1.3.6.1.4.1.8708.2.50.2.6.1.1

An entry in the ifOtn Flexo list.

Indexes

ifOtnFlexoIndex

Column	Syntax	OID
ifOtnFlexoIndex An index assigned to each entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.8708.2.50.2.6.1.1.1
ifOtnFlexoName The management name of the otn flexo, for example 'flexO:1:2:1-2', where the first number indicates subrack, the second slot number and the third/fourth are the physical port numbers.	LUM-TCMgmtNameString Type Constraints: range: 0..255 Description: An octet string containing administrative information, in human-readable form. More or less the same as SnmpAdminString defined in SNMP-FRAMEWORK-MIB.	.1.3.6.1.4.1.8708.2.50.2.6.1.1.2
ifOtnFlexoConnIfBasicIfIndex An index that describes to which index in ifBasicIf table this object is related.	LUM-TCUnsigned32WithNA Type Constraints: range: 0..4294967294 Description: An unsigned32 integer of an object. 4294967293 used to tell that it is not possible to read attribute at the moment. 4294967294 is used to indicate that the attribute is not used on the object	.1.3.6.1.4.1.8708.2.50.2.6.1.1.3
ifOtnFlexoInterfaceGroupId The flexO interface configuration group ID number.	Unsigned32r/w Constraints: range: 1-1048575	.1.3.6.1.4.1.8708.2.50.2.6.1.1.4
ifOtnFlexoInterfaceInstanceId1 The flexO interface group configuration instance ID number.	Unsigned32r/w Constraints: range: 1-254	.1.3.6.1.4.1.8708.2.50.2.6.1.1.5
ifOtnFlexoInterfaceInstanceId2 The flexO interface group configuration instance ID number.	Unsigned32r/w Constraints: range: 1-254	.1.3.6.1.4.1.8708.2.50.2.6.1.1.6
ifOtnFlexoInterfaceInstanceId3 The flexO interface group configuration instance ID number.	Unsigned32r/w Constraints: range: 1-254	.1.3.6.1.4.1.8708.2.50.2.6.1.1.7
ifOtnFlexoInterfaceInstanceId4 The flexO interface group configuration instance ID number.	Unsigned32r/w Constraints: range: 1-254	.1.3.6.1.4.1.8708.2.50.2.6.1.1.8
ifOtnFlexoTxSignalStatus The state for outgoing (TX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.50.2.6.1.1.9
ifOtnFlexoRxSignalStatus The state for incoming (RX) signal of the interface. down - A major fault has occurred. degraded - The signal quality is impaired. up - The signal is OK.	LUM-TCSignalStatusWithNA Type Values: 1 down 2 degraded 3 up 2147483647 notApplicable Description: SignalStatus. notApplicable - used to tell that attribute is not used in current configuration.	.1.3.6.1.4.1.8708.2.50.2.6.1.1.10
ifOtnFlexoLossOfFrameMultiframe Loss of frame-multiframe (LOFLOM). Indicates loss of frame-multiframe. Reference: 6.2.5.1 G.798, 6.2.5.2 G.798 A: Loss of frame-multiframe is active. D: Loss o…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.6.1.1.11
ifOtnFlexoRemoteDefectIndication Remote defect indication (RDI). Applicable for FlexO signal formats. A: RDI indication (in frame) is active. D: RDI indication inactive.	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.6.1.1.12
ifOtnFlexoGroupIdentifierMismatch Group identifier mismatch (GIDM). Group identification field of the FlexO overhead used for defect detection. alarm: Mismatch of accepted and expected GID. ok: accepted and expected GID mat…	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.6.1.1.13
ifOtnFlexoMapMismatch Flex map Mismatch (FMM) mismatch in mapping of FlexO group. A: FMM indication (in frame) active. D: FMM indication inactive.	LUM-TCFaultStatusWithNA Type Values: 1 ok 2 alarm 2147483647 notApplicable Description: A value indicating the current state of a potential fault condition leading to an alarm for an object. ok - indicates that no fault condition is present and no alarm is active or the alarm has been cleared. …	.1.3.6.1.4.1.8708.2.50.2.6.1.1.14