ifOtnTpRxMultiplexStructureIdentifierMismatch

LUM-IFOTN-MIB · .1.3.6.1.4.1.8708.2.50.2.5.1.1.6
Commands MIB view Table view

Object

column LUM-TCFaultStatusWithNA 
Rx Multiplex structure identifier mismatch (MSIM).
              
Indicates received MSI is not equal to expected MSI.
              
alarm: The MSIM shall be declared for the ODU tributary port
       if the received MSI is not equal to the expected MSI.
              
ok: MSIM shall be cleared if the received MSI is equal to the
    expected MSI.
              
reference 19.4.1 G709, 6.2.9.1 G.798

Context

MIB
LUM-IFOTN-MIB
OID
.1.3.6.1.4.1.8708.2.50.2.5.1.1.6
Type
column
Access
readonly
Status
current
Parent
ifOtnTpEntry
Groups
3

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFOTN-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFOTN-MIB::ifOtnTpRxMultiplexStructureIdentifierMismatch'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'LUM-IFOTN-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFOTN-MIB::ifOtnTpRxMultiplexStructureIdentifierMismatch.<ifOtnTpIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'LUM-IFOTN-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'LUM-IFOTN-MIB::ifOtnTpRxMultiplexStructureIdentifierMismatch'

Syntax

LUM-TCFaultStatusWithNA
Source
LUM-TCFaultStatusWithNA
Base type
Enumeration
Type Description
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.
          
ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
          
alarm - indicates that a fault condition is present
and an alarm is active.
          
notApplicable - used to tell that attribute
is not used in current configuration.
          
Note: The list of FaultStatus objects forms the list of all
potential alarms for the system.

Values & Constraints

Type Values
1ok
2alarm
2147483647notApplicable

Conformance

Member of
ifOtnTpGroupV1 ifOtnTpGroupV2 ifOtnTpGroupV3