LUM-IFETH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
3
Rows
3
Columns
40

ifEthPhysicalTable

table
.1.3.6.1.4.1.8708.2.54.2.2.1 · 1 row entry · 22 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifEthPhysicalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFETH-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFETH-MIB::ifEthPhysicalTable' 
The Physical group contains information and
configuration for the eth physical layer.
ifEthPhysicalEntry row .1.3.6.1.4.1.8708.2.54.2.2.1.1
An entry in the ifEth physical list.
Indexes
Column Syntax OID
ifEthPhysicalIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.1
ifEthPhysicalName
The management name of the optical transmission section,
for example 'physical:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.2
ifEthPhysicalConnIfBasicIfIndex
An index that describes to which index in ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.3
ifEthPhysicalAutoNegotiationMode
The wanted auto negotiation mode.

off - auto negotiation process is disabled

on - auto negotiation process is enabled

notApplicable (2147483647) is used when attribute is
not…
LUM-TCOnOff
Type Values:
1off
2on
2147483646notAvailable
2147483647notApplicable
Description:
The configured laser mode.
notApplicable - used to tell that attribute
is not used in current configuration.
notAvailable - used to tell that it is not
possible to read attribute at the moment.
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.4
ifEthPhysicalAutoNegotiationStatus
The result of the auto negotiation procedure

incomplete - the result is still pending

halfDuplex - half duplex

fullDuplex - full duplex

halfDuplexRxPauseOn - h…
LUM-TCAutoNegotiationStatus
Type Values:
1incomplete
2halfDuplex
3fullDuplex
4halfDuplexRxPauseOn
5halfDuplexTxPauseOn
6halfDuplexRxTxPauseOn
7fullDuplexRxPauseOn
8fullDuplexTxPauseOn
9fullDuplexRxTxPauseOn
10fullDuplexFec
11fec
2147483646notAvailable
2147483647notApplicable
Description:
The result of the auto negotiation procedure

incomplete - the result is still pending

halfDuplex - half duplex

fullDuplex - full duplex

halfDuplexRxPauseOn - half duplex, Rx p…
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.5
ifEthPhysicalRxUtilization
Shows a snapshot of the current bandwidth
utilization of the received ethernet signal during
the last second.
LUM-TCUnsigned32WithNA
Constraints:
range: 0-1000
range: 2147483646-2147483647
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.6
ifEthPhysicalTxUtilization
Shows a snapshot of the current bandwidth
utilization of the received ethernet signal during
the last second.
LUM-TCUnsigned32WithNA
Constraints:
range: 0-1000
range: 2147483646-2147483647
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.7
ifEthPhysicalTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.8
ifEthPhysicalRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.9
ifEthPhysicalRemoteLinkFault
Remote link fault (RLF).

Reference: 1000Base-SX/LX: 37.2.1.5 RF1/RF2 IEEE 802.3ah

alarm: Active remote link fault indication.

ok: Inactive remote link fault indication.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.10
ifEthPhysicalLocalLinkFault
Local link fault (LLF).

Reference: 49.2.4.5 => 46.3.4 (link_fault in 46.3.4.2) 49.2.13.3

alarm: Active local link fault indication.

ok: Inactive local link fault indication.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.11
ifEthPhysicalLinkDown
Link down.

alarm: Failure to negotiate a connection with the
other party.

ok: A connection is negotiated.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.12
ifEthPhysicalHighBitErrorRate
High bit error rate (Hi-Ber), BER > 10^(-4).

Reference: 10GBase-R: 49.2.13.2.2 (hi_ber) IEEE 802.3ah

alarm: Active high bit error rate.

ok: Inactive high bit error rate.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.13
ifEthPhysicalPcsLossOfFrame
Rx PCS Loss of frame (block-lock).

Reference: 10GBase-R: 49.2.13.2.2

alarm: Active high bit error rate.

ok: Inactive high bit error rate.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.14
ifEthPhysicalRxLocalLinkFault
Rx Local link fault (LLF).

Reference: 49.2.4.5 => 46.3.4 (link_fault in 46.3.4.2) 49.2.13.3

alarm: Active local link fault indication.

ok: Inactive local link fault indicatio…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.15
ifEthPhysicalTxLocalLinkFault
Tx Local link fault (LLF).

Reference: 49.2.4.5 => 46.3.4 (link_fault in 46.3.4.2) 49.2.13.3

alarm: Active local link fault indication.

ok: Inactive local link fault indicatio…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.16
ifEthPhysicalRxHighBitErrorRate
Rx High bit error rate (Hi-Ber), BER > 10^(-4).

Reference: 10GBase-R: 49.2.13.2.2 (hi_ber) IEEE 802.3ah

alarm: Active high bit error rate.

ok: Inactive high bit error rate.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.17
ifEthPhysicalTxHighBitErrorRate
Tx High bit error rate (Hi-Ber), BER > 10^(-4).

Reference: 10GBase-R: 49.2.13.2.2 (hi_ber) IEEE 802.3ah

alarm: Active high bit error rate.

ok: Inactive high bit error rate.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.18
ifEthPhysicalTxPcsLossOfFrame
Tx PCS Loss of frame (block-lock).

Reference: 10GBase-R: 49.2.13.2.2

alarm: Active high bit error rate.

ok: Inactive high bit error rate.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.19
ifEthPhysicalUId
An unique identifier assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.20
ifEthPhysicalRxPcsLossOfSync
RX PCS Loss of sync.

Reference: 1000Base-X: 36.2.5.2.6 IEEE 802.3

alarm: GbE 'frame' can not be located.

ok: GbE 'frame' is located.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.21
ifEthPhysicalTxPcsLossOfSync
TX PCS Loss of sync.

Reference: 1000Base-X: 36.2.5.2.6 IEEE 802.3

alarm: GbE 'frame' can not be located.

ok: GbE 'frame' is located.
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.54.2.2.1.1.22

ifEthMacTable

table
.1.3.6.1.4.1.8708.2.54.2.3.1 · 1 row entry · 10 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifEthMacTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFETH-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFETH-MIB::ifEthMacTable' 
The Mac group contains information and
configuration for the eth mac layer.
ifEthMacEntry row .1.3.6.1.4.1.8708.2.54.2.3.1.1
An entry in the ifEth mac list.
Indexes
Column Syntax OID
ifEthMacIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.54.2.3.1.1.1
ifEthMacName
The management name of the optical transmission section,
for example 'mac:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the physical port numbers.
LUM-TCMgmtNameString
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.54.2.3.1.1.2
ifEthMacConnIfBasicIfIndex
An index that describes to which index in ifBasicIf table
this object is related.
LUM-TCUnsigned32WithNA
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.54.2.3.1.1.3
ifEthMacRxUtilization
Shows a snapshot of the current bandwidth
utilization of the received ethernet signal during
the last second.
LUM-TCUnsigned32WithNA
Constraints:
range: 0-1000
range: 2147483646-2147483647
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.54.2.3.1.1.4
ifEthMacTxUtilization
Shows a snapshot of the current bandwidth
utilization of the transmitted ethernet signal during
the last second.
LUM-TCUnsigned32WithNA
Constraints:
range: 0-1000
range: 2147483646-2147483647
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.54.2.3.1.1.5
ifEthMacMaxMtuSize
The maximum size of the transmitted and
received frames (in bytes).
LUM-TCUnsigned32WithNA
Constraints:
range: 1518-9600
range: 2147483647-2147483647
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.54.2.3.1.1.6
ifEthMacInterPacketGap
Time between the frames in nano seconds.

Legal values are 64, 72, 80, ... 200, 320, 328,
336, ... 456
LUM-TCUnsigned32WithNA
Constraints:
range: 64-456
range: 2147483647-2147483647
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.54.2.3.1.1.7
ifEthMacFlowControlMode
The mode for handling flow control between
the local device and link partner.

The PAUSE settings has the following meaning
when auto-negotiation is enabled.

Setting 802.3 equivalent
----…
LUM-TCFlowControlMode
Type Values:
1noPause
2rxPause
3txPause
4bothPause
2147483647notApplicable
Description:
The mode for handling flow control between
the local device and link partner.

The PAUSE settings has the following meaning
when auto-negotiation is enabled.

Setting 802.3 equivalent
------- -…
 .1.3.6.1.4.1.8708.2.54.2.3.1.1.8
ifEthMacTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.54.2.3.1.1.9
ifEthMacRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.

notAp…
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.54.2.3.1.1.10

ifEthRsFecTable

table
.1.3.6.1.4.1.8708.2.54.2.4.1 · 1 row entry · 8 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk ifEthRsFecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'LUM-IFETH-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'LUM-IFETH-MIB::ifEthRsFecTable' 
The RS-FEC group contains information and
configuration for the eth-rsFec error correction.
ifEthRsFecEntry row .1.3.6.1.4.1.8708.2.54.2.4.1.1
An entry in the ifEth RS-Fec list.
Indexes
Column Syntax OID
ifEthRsFecIndex
An index assigned to each entry.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.8708.2.54.2.4.1.1.1
ifEthRsFecName
The management name of the RS-FEC object,
for example 'clientRsFec:1:2:1-2', where the first number
indicates subrack, the second slot number and the
third/fourth are the physical port numbers.
LUM-TCMgmtNameStringr/w
Type Constraints:
range: 0..255
Description:
An octet string containing administrative
information, in human-readable form.

More or less the same as SnmpAdminString
defined in SNMP-FRAMEWORK-MIB.
 .1.3.6.1.4.1.8708.2.54.2.4.1.1.2
ifEthRsFecConnIfBasicIfIndex
An index describing to which index in ifBasicIf table
this object is related to.
LUM-TCUnsigned32WithNAr/w
Type Constraints:
range: 0..4294967294
Description:
An unsigned32 integer of an object.

4294967293 used to tell that it is not
possible to read attribute at the moment.

4294967294 is used to indicate that the attribute
is not used on the object
 .1.3.6.1.4.1.8708.2.54.2.4.1.1.3
ifEthRsFecTxSignalStatus
The state for outgoing (TX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.54.2.4.1.1.4
ifEthRsFecRxSignalStatus
The state for incoming (RX) signal
of the interface.

down - A major fault has occurred.

degraded - The signal quality is impaired.

up - The signal is OK.
LUM-TCSignalStatusWithNA
Type Values:
1down
2degraded
3up
2147483647notApplicable
Description:
SignalStatus.
notApplicable - used to tell that attribute
is not used in current configuration.
 .1.3.6.1.4.1.8708.2.54.2.4.1.1.5
ifEthRsFecMode
Set RS-FEC mode.

auto - RS-FEC automatically enabled or disabled, according to detected transceiver type.

forced on - RS-FEC always enabled, regardless of the inserted transceive…
LUM-TCRsFecModer/w
Type Values:
0forcedOff
1forcedOn
2auto
Description:
RS-FEC configuration modes
 .1.3.6.1.4.1.8708.2.54.2.4.1.1.6
ifEthRsFecActualRsFec
The actual RS-FEC configuration.

off - RS-FEC is disabled for inserted transceiver type.
on - RS-FEC is enabled for inserted transceiver type.
undefined - not possible to read attribute at th…
LUM-TCRsFecOnOff
Type Values:
0off
1on
2undefined
Description:
Ethernet RS-FEC enabled/disabled.

off - RS-FEC is disabled for inserted transceiver type.
on - RS-FEC is enabled for inserted transceiver type.
undefined - RS-FEC not configured, no transceiver i…
 .1.3.6.1.4.1.8708.2.54.2.4.1.1.7
ifEthRsFecLanesAlignmentError
FEC-lanes alignment error.

FEC-lanes alignment marker does not contain valid lane identification
bytes to identify the lanes as they are received.

Reference: IEEE 802.3/91.5.3
…
LUM-TCFaultStatusWithNA
Type Values:
1ok
2alarm
2147483647notApplicable
Description:
A value indicating the current state
of a potential fault condition leading to
an alarm for an object.

ok - indicates that no fault condition is present
and no alarm is active or the alarm has been cleared.
…
 .1.3.6.1.4.1.8708.2.54.2.4.1.1.8