ifEthPhysicalAutoNegotiationMode
LUM-IFETH-MIB ·
.1.3.6.1.4.1.8708.2.54.2.2.1.1.4
Object
column
LUM-TCOnOff
The wanted auto negotiation mode.
off - auto negotiation process is disabled
on - auto negotiation process is enabled
notApplicable (2147483647) is used when attribute is
not used in current configuration.
Context
- MIB
- LUM-IFETH-MIB
- OID
.1.3.6.1.4.1.8708.2.54.2.2.1.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ifEthPhysicalEntry
- Table
- ifEthPhysicalTable
- Siblings
- 21
Values & Constraints
Type Values
1 | off |
2 | on |
2147483646 | notAvailable |
2147483647 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifEthPhysicalIndex An index assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.54.2.2.1.1.1 |
| ifEthPhysicalRemoteLinkFault Remote link fault (RLF).
Reference: 1000Base-SX/LX: 37.2.1.5 RF1/RF2 IEEE 802.3ah
alarm: Active remote link fault indication.
ok: Inac… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.54.2.2.1.1.10 |
| ifEthPhysicalLocalLinkFault Local link fault (LLF).
Reference: 49.2.4.5 => 46.3.4 (link_fault in 46.3.4.2) 49.2.13.3
alarm: Active local link fault indication.
ok… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.54.2.2.1.1.11 |
| ifEthPhysicalLinkDown Link down.
alarm: Failure to negotiate a connection with the
other party.
ok: A connection is negotiated. | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.54.2.2.1.1.12 |
| ifEthPhysicalHighBitErrorRate High bit error rate (Hi-Ber), BER > 10^(-4).
Reference: 10GBase-R: 49.2.13.2.2 (hi_ber) IEEE 802.3ah
alarm: Active high bit error rate.
… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.54.2.2.1.1.13 |
| ifEthPhysicalPcsLossOfFrame Rx PCS Loss of frame (block-lock).
Reference: 10GBase-R: 49.2.13.2.2
alarm: Active high bit error rate.
ok: Inactive high bit error ra… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.54.2.2.1.1.14 |
| ifEthPhysicalRxLocalLinkFault Rx Local link fault (LLF).
Reference: 49.2.4.5 => 46.3.4 (link_fault in 46.3.4.2) 49.2.13.3
alarm: Active local link fault indication.
… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.54.2.2.1.1.15 |
| ifEthPhysicalTxLocalLinkFault Tx Local link fault (LLF).
Reference: 49.2.4.5 => 46.3.4 (link_fault in 46.3.4.2) 49.2.13.3
alarm: Active local link fault indication.
… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.54.2.2.1.1.16 |
| ifEthPhysicalRxHighBitErrorRate Rx High bit error rate (Hi-Ber), BER > 10^(-4).
Reference: 10GBase-R: 49.2.13.2.2 (hi_ber) IEEE 802.3ah
alarm: Active high bit error rate.
… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.54.2.2.1.1.17 |
| ifEthPhysicalTxHighBitErrorRate Tx High bit error rate (Hi-Ber), BER > 10^(-4).
Reference: 10GBase-R: 49.2.13.2.2 (hi_ber) IEEE 802.3ah
alarm: Active high bit error rate.
… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.54.2.2.1.1.18 |
| ifEthPhysicalTxPcsLossOfFrame Tx PCS Loss of frame (block-lock).
Reference: 10GBase-R: 49.2.13.2.2
alarm: Active high bit error rate.
ok: Inactive high bit error ra… | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.54.2.2.1.1.19 |
| ifEthPhysicalName The management name of the optical transmission section,
for example 'physical:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are … | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.54.2.2.1.1.2 |
| ifEthPhysicalUId An unique identifier assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.54.2.2.1.1.20 |
| ifEthPhysicalRxPcsLossOfSync RX PCS Loss of sync.
Reference: 1000Base-X: 36.2.5.2.6 IEEE 802.3
alarm: GbE 'frame' can not be located.
ok: GbE 'frame' is located. | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.54.2.2.1.1.21 |
| ifEthPhysicalTxPcsLossOfSync TX PCS Loss of sync.
Reference: 1000Base-X: 36.2.5.2.6 IEEE 802.3
alarm: GbE 'frame' can not be located.
ok: GbE 'frame' is located. | column | LUM-TCFaultStatusWithNA | .1.3.6.1.4.1.8708.2.54.2.2.1.1.22 |
| ifEthPhysicalConnIfBasicIfIndex An index that describes to which index in ifBasicIf table
this object is related. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.54.2.2.1.1.3 |
| ifEthPhysicalAutoNegotiationStatus The result of the auto negotiation procedure
incomplete - the result is still pending
halfDuplex - half duplex
fullDuplex - full duple… | column | LUM-TCAutoNegotiationStatus | .1.3.6.1.4.1.8708.2.54.2.2.1.1.5 |
| ifEthPhysicalRxUtilization Shows a snapshot of the current bandwidth
utilization of the received ethernet signal during
the last second. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.54.2.2.1.1.6 |
| ifEthPhysicalTxUtilization Shows a snapshot of the current bandwidth
utilization of the received ethernet signal during
the last second. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.54.2.2.1.1.7 |
| ifEthPhysicalTxSignalStatus The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.54.2.2.1.1.8 |
| ifEthPhysicalRxSignalStatus The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.54.2.2.1.1.9 |