ifEthMacRxSignalStatus
LUM-IFETH-MIB ·
.1.3.6.1.4.1.8708.2.54.2.3.1.1.10
Object
column
LUM-TCSignalStatusWithNA
The state for incoming (RX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up - The signal is OK.
notApplicable (2147483647) - Attribute is not
used in current configuration.
Context
- MIB
- LUM-IFETH-MIB
- OID
.1.3.6.1.4.1.8708.2.54.2.3.1.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ifEthMacEntry
- Table
- ifEthMacTable
- Siblings
- 9
Values & Constraints
Type Values
1 | down |
2 | degraded |
3 | up |
2147483647 | notApplicable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifEthMacIndex An index assigned to each entry. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.8708.2.54.2.3.1.1.1 |
| ifEthMacName The management name of the optical transmission section,
for example 'mac:1:2:1-2', where the first number indicates
subrack, the second slot number and the third/fourth
are the p… | column | LUM-TCMgmtNameString | .1.3.6.1.4.1.8708.2.54.2.3.1.1.2 |
| ifEthMacConnIfBasicIfIndex An index that describes to which index in ifBasicIf table
this object is related. | column | LUM-TCUnsigned32WithNA | .1.3.6.1.4.1.8708.2.54.2.3.1.1.3 |
| ifEthMacRxUtilization Shows a snapshot of the current bandwidth
utilization of the received ethernet signal during
the last second. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.54.2.3.1.1.4 |
| ifEthMacTxUtilization Shows a snapshot of the current bandwidth
utilization of the transmitted ethernet signal during
the last second. | column | Unsigned32 | .1.3.6.1.4.1.8708.2.54.2.3.1.1.5 |
| ifEthMacMaxMtuSize The maximum size of the transmitted and
received frames (in bytes). | column | Unsigned32 | .1.3.6.1.4.1.8708.2.54.2.3.1.1.6 |
| ifEthMacInterPacketGap Time between the frames in nano seconds.
Legal values are 64, 72, 80, ... 200, 320, 328,
336, ... 456 | column | Unsigned32 | .1.3.6.1.4.1.8708.2.54.2.3.1.1.7 |
| ifEthMacFlowControlMode The mode for handling flow control between
the local device and link partner.
The PAUSE settings has the following meaning
when auto-negotiation is enabled.
… | column | LUM-TCFlowControlMode | .1.3.6.1.4.1.8708.2.54.2.3.1.1.8 |
| ifEthMacTxSignalStatus The state for outgoing (TX) signal
of the interface.
down - A major fault has occurred.
degraded - The signal quality is impaired.
up … | column | LUM-TCSignalStatusWithNA | .1.3.6.1.4.1.8708.2.54.2.3.1.1.9 |