LAN-EMULATION-ELAN-MIB Table View

This table contains all Emulated LANs
(ELANs) this agent manages.  An ELAN
is defined by the ELAN name, a set of
TLVs, and other parameters.  After an
ELAN is created, members of the ELAN
such as the LAN Emulation Server (LES)
or Client (LEC) can be added to this
ELAN entry in their repective tables.
There are four memebers to an ELAN and
they are LECS, LES, BUS (Broadcast and
Unknown Server ) and LEC.  The support
of LECS is optional.  The addition and
deletion of LECS is done in the 
elanLecsConfGroup defined in this MIB.
The addition and deletion of the LEC
are done in the LEC Assignment tables
defined in this ELAN Configuration group.
The addition and deletion of the LES
are also defined in this group.  The
addition and deletion of the BUS are
done in the LES MIB due to the fact that
LEC learns the BUS address only from
the LES it corresponds to.

elanConfEntry row .1.3.6.1.4.1.353.5.3.2.2.2.1

Each entry in this table represents an
Emulated LAN. Objects elanConfIndex
and elanConfRowStatus are required
during row creation and deletion.

Indexes

elanConfIndex

Column	Syntax	OID
elanConfIndexmandatory A value which uniquely identifies a conceptual row in the elanConfTable. If the conceptual row identified by this value of elanConfIndex is recreated following an agent restart, the same value of elanCo…	ElanLocalIndex	.1.3.6.1.4.1.353.5.3.2.2.2.1.1
elanConfNamemandatory The name of this Emulated LAN entry. When this object length is zero then the ELAN name is not specified. The clients assigned to this ELAN will also have a zero length string as the ELAN name. The valu…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.353.5.3.2.2.2.1.2
elanConfTlvIndexmandatory The value of this object identifies one or more rows in the lecsTlvTable which applies to this ELAN. This object is set to zero if 1) LECS is not supported. or 2) there is no TLV associated with this entry.	TlvSelectorIndexTyper/w	.1.3.6.1.4.1.353.5.3.2.2.2.1.3
elanConfLanTypemandatory The LAN type of this ELAN entry.	LAN-EMULATION-CLIENT-MIBLecDataFrameFormatr/w Type Values: 1 unspecified 2 aflane8023 3 aflane8025	.1.3.6.1.4.1.353.5.3.2.2.2.1.4
elanConfMaxFrameSizemandatory The maximum data frame size of this ELAN entry. The maximum AAL-5 SDU size of a data frame that this ELAN can support. The value of this object is returned to the LEC in the LE CONFIGURE response.	LAN-EMULATION-CLIENT-MIBLecDataFrameSizer/w Type Values: 1 unspecified 2 max1516 3 max4544 4 max9234 5 max18190	.1.3.6.1.4.1.353.5.3.2.2.2.1.5
elanConfRowStatusmandatory This object is used to create or delete entries in the elanConfTable.	RowStatusr/w	.1.3.6.1.4.1.353.5.3.2.2.2.1.6

This table contains all LESs for each 
ELAN specified in the elanConfTable.
    Each ELAN can have more than
    one LES providing LAN Emulation 
    services.  Each LES can service only
one ELAN.  The table is indexed by the
elanConfIndex which points to the ELAN
this LES is providing service to, and
elanLesIndex which unquely identifies
a LES.  This table is used for configuration
of an ELAN only, that is, creating a
LES in this table does not instantiate
a LES in the network.  It is done in
the LES MIB.

elanLesEntry row .1.3.6.1.4.1.353.5.3.2.2.3.1

Each entry in this table represents
a LES/Emulated LAN pair. Object
elanLesAtmAddress besides elanLesRowStatus
is also required during row creation.

Indexes

elanConfIndex elanLesIndex

Column	Syntax	OID
elanLesIndexmandatory An arbitrary number which uniquely identifies the LES this entry pertains to.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.2.2.3.1.1
elanLesAtmAddressmandatory The ATM address of the LES entry. If LECS is supported, the value of this object is the LES ATM address LECS returns to the LEC in the CONFIGURE response. If LECS is not supported, the value of this object pertains to…	AtmLaneAddressr/w Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.2.2.3.1.2
elanLesRowStatusmandatory This object is used to create or delete entries in the elanLesfTable.	RowStatusr/w	.1.3.6.1.4.1.353.5.3.2.2.3.1.3

This table contains all policies this
agent supports for assigning a LEC to
an ELAN. 
A set of policies with the same or
different priorities can be selected
by the entity which provides ELAN
configuration service such
as the LECS.  The policy with the
highest priority or with the smallest
elanPolicyPriority , is evaluated
first.  The policies with the same
elanPolicyPriority are evaluated
at the same time with the AND operation.
When LECS receives a configure
request, it checks it's policies selected
from this table to determine which 
ELAN and LES the LEC will join.
This table is indexed by a selector
index and a policy index.  The policy
index unquely identifies a policy and
the selector index allows multiple
policies be selected by one LECS or
an entity that is providing ELAN
configuration service.

elanPolicyEntry row .1.3.6.1.4.1.353.5.3.2.2.4.1

Each entry in this table represents a
policy supported by the entity which
provides ELAN configuration
services. Each policy can be used to
evaluate the CONFIGURE request from
the LEC in determining which ELAN it
bel…

Indexes

elanPolicySelectorIndex elanPolicyIndex

Column	Syntax	OID
elanPolicySelectorIndexmandatory The value of this object indicates a group of policies that can be selected by the ELAN configuration service provider such as the LECS.	PolicySelectorIndexType	.1.3.6.1.4.1.353.5.3.2.2.4.1.1
elanPolicyIndexmandatory The value of this object uniquely identifies a single policy entry in this table.	Integer32 Constraints: range: 1-65000	.1.3.6.1.4.1.353.5.3.2.2.4.1.2
elanPolicyPrioritymandatory The priority of this policy entry. Policies are evaluated by the entity which provides ELAN configuration service (LECS) by their priorities. Policies with the same priority values should be evludated at the same tim…	Integer32r/w Constraints: range: 1-65000	.1.3.6.1.4.1.353.5.3.2.2.4.1.3
elanPolicyTypemandatory The value of this object must reference a definition of a type of policy. Some of such definition exist within the elanAdminPolicyVal subtree. Others may be defined within enterprise specific subtrees. The agent is n…	AutonomousTyper/w	.1.3.6.1.4.1.353.5.3.2.2.4.1.4
elanPolicyRowStatusmandatory This object is used to create or delete entries in the elanPolicyTable.	RowStatusr/w	.1.3.6.1.4.1.353.5.3.2.2.4.1.5

This table is used to assign a LEC
to an ELAN by ATM address.
When the by ATM address policy is 
used, this table is used to specify
the LEC's ATM address or portion of an ATM
address.  The ATM address is used by
the LECS or other entity which serves
the LANE configuration function to
determine the ELAN membership.
          
This table is indexed
by the elanConfIndex which points
to the ELAN this LEC belongs, the
elanLesIndex which points to the
LES this LEC should join, the
LEC's ATM address and an ATM address
mask.  Portions of ATM address
can be used in dertermining ELAN
membership by using both the ATM
address and the mask.

elanLecAtmAddrEntry row .1.3.6.1.4.1.353.5.3.2.2.5.1

Each entry represents a LEC to ELAN
binding.

Indexes

elanConfIndex elanLesIndex elanLecAtmAddress elanLecAtmMask

Column	Syntax	OID
elanLecAtmAddressmandatory The value of this object is the ATM address of a LAN Emulation client. This object and the object elanLecAtmMask are used to form an ATM address or portion of an ATM address to be used by the LECS in determining the EL…	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.2.2.5.1.1
elanLecAtmMaskmandatory The ATM address mask associated with the object elanLecAtmAddress. The value of the mask is an ATM address with the don't care portion set to zero and the valid ATM address portion set to one.	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.2.2.5.1.2
elanLecAtmRowStatusmandatory This object is used to create or destroy entries in this table.	RowStatusr/w	.1.3.6.1.4.1.353.5.3.2.2.5.1.4

This table is used to assign a LEC
to an ELAN by MAC address.
When the byMacAddress policy is 
used, this table is used to specify
the LEC's ELAN membership by ATM
address.  This table is indexed
by the elanConfIndex which points
to the ELAN this LEC belongs, the
elanLesIndex which points to the
LES this LEC should join, and the
LEC's MAC address.

elanLecMacAddrEntry row .1.3.6.1.4.1.353.5.3.2.2.6.1

Each entry represents a LEC to ELAN
binding.

Indexes

elanConfIndex elanLesIndex elanLecMacAddress

Column	Syntax	OID
elanLecMacAddressmandatory The value of this object is the MAC address of a LAN Emulation client. When a CONFIGURE request is received with this MAC address, it will be assigned to the ELAN which elanConfIndex is pointing to.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.353.5.3.2.2.6.1.1
elanLecMacRowStatusmandatory This object is used to create or destroy entries in this table.	RowStatusr/w	.1.3.6.1.4.1.353.5.3.2.2.6.1.2

This table is used to assign a LEC
to an ELAN by Route Descriptor.
    When the by Route Descriptor policy is 
used, this table is used to specify
the LEC's ELAN membership by Route
Descriptor.  This table is indexed
by the elanConfIndex which points
to the ELAN this LEC belongs, the
elanLesIndex which points to the
LES this LEC should join, and the
LEC's Route Descriptors.

elanLecRdEntry row .1.3.6.1.4.1.353.5.3.2.2.7.1

Each entry represents a LEC to ELAN
binding.

Indexes

elanConfIndex elanLesIndex elanLecRdSegId elanLecRdBridgeNum

Column	Syntax	OID
elanLecRdSegIdmandatory The LAN ID portion of the IEEE 802.5 route descriptor associated with this conceptual row.	Integer32 Constraints: range: 0-4095	.1.3.6.1.4.1.353.5.3.2.2.7.1.1
elanLecRdBridgeNummandatory The Bridge Number portion of the IEEE 802.5 route descriptor associated with this conceptual row.	Integer32 Constraints: range: 0-15	.1.3.6.1.4.1.353.5.3.2.2.7.1.2
elanLecRdRowStatusmandatory This object is used to create or destroy entries in this table.	RowStatusr/w	.1.3.6.1.4.1.353.5.3.2.2.7.1.4

This table is used to assign a LEC
to an ELAN by Packet Size. When the by 
Packet Size policy is used, this table 
is used to specifythe LEC's ELAN 
membership by Packet Size.  This table 
is indexed by the elanConfIndex which 
points to the ELAN this LEC belongs, 
the elanLesIndex which points to the
LES this LEC should join, and the
LEC's Packet Size.

elanLecPktSizeEntry row .1.3.6.1.4.1.353.5.3.2.2.8.1

Each entry represents a LEC to ELAN
binding.

Indexes

elanConfIndex elanLesIndex elanLecFrameSize

Column	Syntax	OID
elanLecFrameSizemandatory The maximum AAL-5 SDU size this LEC can support.	LAN-EMULATION-CLIENT-MIBLecDataFrameSize Type Values: 1 unspecified 2 max1516 3 max4544 4 max9234 5 max18190	.1.3.6.1.4.1.353.5.3.2.2.8.1.1
elanLecPktSizeRowStatusmandatory This object is used to create or destroy entries in this table.	RowStatusr/w	.1.3.6.1.4.1.353.5.3.2.2.8.1.2

This table is used to assign a LEC
to an ELAN by ELAN name. When the by 
ELAN name policy is used, this table 
is used to specifythe LEC's ELAN 
membership by ELAN name.  This table 
is indexed by the elanConfIndex which 
points to the ELAN this LEC belongs, 
the elanLesIndex which points to the
LES this LEC should join, and the
LEC's ELAN name.

elanLecNameEntry row .1.3.6.1.4.1.353.5.3.2.2.9.1

Each entry represents a LEC to ELAN
binding.

Indexes

elanConfIndex elanLesIndex elanLecElanName

Column	Syntax	OID
elanLecElanNamemandatory The name of the ELAN this LEC belongs.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.353.5.3.2.2.9.1.1
elanLecNameRowStatusmandatory This object is used to create or destroy entries in this table.	RowStatusr/w	.1.3.6.1.4.1.353.5.3.2.2.9.1.2

This table contains the configuration 
information of all LECS this agent
manages.  This table can also be
used to create, delete or configure
a LECS.

lecsConfEntry row .1.3.6.1.4.1.353.5.3.2.3.1.2.1

Each entry represents a LECS this
agent maintains.
Objects lecsAtmIfIndex, lecsAtmAddrSpec,
and lecsAtmAddrMask cannot be modified
unless the lecsAdminStatus is set to
down(2). And the change does not take
effect unti…

Indexes

lecsConfIndex

Column	Syntax	OID
lecsConfIndexmandatory An arbitrary integer which represents a LECS this agent manages. If the conceptual row identified by this value of lecsConfIndex is recreated following an agent restart, the same value of elanConfIndex must be used to…	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.353.5.3.2.3.1.2.1.1
lecsAtmIfIndexmandatory An ATM interface which the LECS receives CONFIGURE requests from. This value must match an existing value in the ifTable. This object is set to zero when the ATM interface is not specified or there is more than o…	IfIndexOrZeror/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.3.2.3.1.2.1.2
lecsAtmAddrSpecmandatory An ATM address specified by the network or local management that, with the ATM address mask, determines a portion of the ATM address that the LECS on the designated ATM interface will use to derive the act…	AtmLaneAddressr/w Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.2.3.1.2.1.3
lecsAtmAddrMaskmandatory The ATM address mask associated with the object lecsAtmAddrSpec. The value of the mask is an ATM address with the don't care portion set to zero and the valid ATM address portion set to one.	AtmLaneMaskr/w Type Constraints: range: 20	.1.3.6.1.4.1.353.5.3.2.3.1.2.1.4
lecsAtmAddrActualmandatory The resulting ATM address that the LECS is accepting CONFIGURE requests on the interface indicated by the object lecsAtmIfIndex. This address is the result of the specified ATM address, its mask and …	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.2.3.1.2.1.5
lecsPolicySelIndexmandatory The set of policies used by this LECS in dertermining requesters ELAN membership. The policies are defined in the elanPolicyTable. The value of this object must exist in the elanPolicyTable.	PolicySelectorIndexType	.1.3.6.1.4.1.353.5.3.2.3.1.2.1.6
lecsLastInitializedmandatory The value of the sysUpTime since LECS has last entered the state indicated by the object lecsOperStatus.	TIMESTAMP Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.3.2.3.1.2.1.7
lecsOperStatusmandatory This object reflects the actual state of the LECS which may differ from that of the lecsAdminStatus object. This can occur when the interface ifOperStatus is 'down' but the correspondi…	Enumeration Enumerated Values: 1 other 2 up 3 down	.1.3.6.1.4.1.353.5.3.2.3.1.2.1.8
lecsAdminStatusmandatory The desired state of the LECS on this interface as prescribed by the operator. The actions of the agent will, if at all possible, eventually result in the desired state being reflected in the lecsOperStatus.	Enumerationr/w Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.353.5.3.2.3.1.2.1.9
lecsRowStatusmandatory This object is used to create or delete entries in this table.	RowStatusr/w	.1.3.6.1.4.1.353.5.3.2.3.1.2.1.10

This table contains the mapping between 
ELANs and LECS.
          
When a LECS is deleted from the lecsConfTable, 
all entries associated with this entry will 
also be deleted.

lecsElanEntry row .1.3.6.1.4.1.353.5.3.2.3.1.3.1

Each entry represents an ELAN to LECS
mapping.

Indexes

elanConfIndex lecsConfIndex

Column	Syntax	OID
lecsElanRowStatusmandatory This object is used to create or delete an entry from this table.	RowStatusr/w	.1.3.6.1.4.1.353.5.3.2.3.1.3.1.1

This table contains mandatoryly configured
sets of TLVs in this LECS. These sets can
include not only the standard TLVs specified
in the LAN Emulation Spec. 1.0 [1] but
also the additional parameters
exchanged between the LECS and LEC.
This table is indexed by a selector
index, which allows more than one
TLV to be selected by an ELAN; and
the TLV tag, which specified the type
of the TLV; and a TLV index which
is used to distinguish between different
entries with the same TLV tag.
How does the LECS treat the TLVs
that are not specified in this table
in the CONFIGURE requests are not
defined in this MIB.

lecsTlvEntry row .1.3.6.1.4.1.353.5.3.2.3.1.4.1

Each entry represents a set of TLV
encodings for an ELAN represented
by the elanConfIndex. Objects lecsTlvVal
and lecsTlvRowStatus are required during
row creation.

Indexes

lecsTlvSelectorIndex lecsTlvTag lecsTlvIndex

Column	Syntax	OID
lecsTlvSelectorIndexmandatory The value of this object indicates a group of TLVs that can be selected.	TlvSelectorIndexType	.1.3.6.1.4.1.353.5.3.2.3.1.4.1.1
lecsTlvTagmandatory The value of this object represents the type of the contents of the lecsTlvVal field in the entry. The OUI field in this object occupies the first ( or most significant )3 octets. The OUI value 00-A0-3E is used for…	OctetString Constraints: range: 4-4	.1.3.6.1.4.1.353.5.3.2.3.1.4.1.2
lecsTlvIndexmandatory The index of this TLV encoding entry. The value of this object can be used to distinguish between different entries with the same lecsTlvTag value.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.353.5.3.2.3.1.4.1.3
lecsTlvValmandatory The value of this TLV entry. Note that the length is implied by the length of the OCTET STRING.	OctetStringr/w Constraints: range: 0-1024	.1.3.6.1.4.1.353.5.3.2.3.1.4.1.4
lecsTlvRowStatusmandatory This object is used to create or destroy entries in this table.	RowStatusr/w	.1.3.6.1.4.1.353.5.3.2.3.1.4.1.5

This table contains all the CONFIG VCCs of the
LECS.  The CONFIG VCC is used by the LEC to send/
receive ATM LE CONFIGURE request/response to/from
the LECS.  This table is writable if PVC is used
and read only if SVC is used.

lecsVccEntry row .1.3.6.1.4.1.353.5.3.2.3.1.5.1

Each entry represents a CONFIG VCC
between a pair of LEC and LECS.

Indexes

lecsConfIndex lecsVccIfIndex lecsVccVpi lecsVccVci

Column	Syntax	OID
lecsVccIfIndexmandatory The ATM interface which the CONFIG VCC is established. This value must be an existing value in the ifTable. The value of this object is set to zero when the ATM interface is an internal connection.	IfIndexOrZero Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.3.2.3.1.5.1.1
lecsVccVpimandatory The VPI value of the CONFIG VCC. The object lecsVccIfIndex, lecsVccVci and this object uniquely identifies a VCC within an ATM system.	LAN-EMULATION-CLIENT-MIBVpiInteger Type Constraints: range: 0..255	.1.3.6.1.4.1.353.5.3.2.3.1.5.1.2
lecsVccVcimandatory The VCI value of the CONFIG VCC. The object lecsVccIfIndex, lecsVccVpi and this object uniquely identifies a VCC within an ATM system	LAN-EMULATION-CLIENT-MIBVciInteger Type Constraints: range: 0..65535	.1.3.6.1.4.1.353.5.3.2.3.1.5.1.3
lecsVccRowStatusmandatory This object is used to create or destroy entries in this table.	RowStatusr/w	.1.3.6.1.4.1.353.5.3.2.3.1.5.1.4

This table contains error log control 
information of all LECS instances.
This table is an extention to the
lecsConfTable.  It is used to enable
or disable error logs for a particular
LECS entry.

lecsErrCtlEntry row .1.3.6.1.4.1.353.5.3.2.3.2.1.1

Each entry represents a LECS entry
in the lecsConfTable.

Indexes

lecsConfIndex

Column	Syntax	OID
lecsErrCtlAdminStatusmandatory This object is used to enable/disable error logging for the LECS.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.353.5.3.2.3.2.1.1.1
lecsErrCtlOperStatusmandatory This object is used to indicate the result of a set operation to the object lecsErrCtlAdminStatus. If the error log was successfully started, it is in active(2) mode. Otherwise, it is set to either outOfRes(3) or failed…	Enumeration Enumerated Values: 1 other 2 active 3 outOfRes 4 failed 5 disabled	.1.3.6.1.4.1.353.5.3.2.3.2.1.1.2
lecsErrCtlClearLogmandatory This object is used to clear the error log entries associated with this LECS.	Enumerationr/w Enumerated Values: 1 noOp 2 clear	.1.3.6.1.4.1.353.5.3.2.3.2.1.1.3
lecsErrCtlMaxEntriesmandatory The maximum entries of the error log a LECS can support.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.353.5.3.2.3.2.1.1.4
lecsErrCtlLastEntrymandatory The index to the last entry in the error log table associated with this LECS.	LecsErrLogIndexTyper/w Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.353.5.3.2.3.2.1.1.5

This table contains error logs
of the LECS instances enabled
in the lecsErrCtlTable.  This table
is indexed by the LECS instance
index and an arbitrary integer
uniquely identifies an error
log.

lecsErrLogEntry row .1.3.6.1.4.1.353.5.3.2.3.2.2.1

Each entry represents a LEC that
was rejected due to a violation
against the policies or an error.

Indexes

lecsConfIndex lecsErrLogIndex

Column	Syntax	OID
lecsErrLogIndexmandatory An arbitrary integer which uniquely identifies an error log entry. The first entry after reset or clearing the error log is an assigned value (2^32-1). Succeding entries are assigned with descending values consecutive…	LecsErrLogIndexType Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.353.5.3.2.3.2.2.1.1
lecsErrLogAtmAddrmandatory The ATM address of the requester which sends the CONFIGURE request and causes the error to occur. The corresponding error code is specified in the object lecsErrLogErrCode.	AtmLaneAddress Type Constraints: range: 0 range: 20	.1.3.6.1.4.1.353.5.3.2.3.2.2.1.2
lecsErrLogErrCodemandatory The Error code which indicates the cause of the error triggered by the CONFIGURE request sent by the requester indicated by the value of the object lecsErrLogAtmAddr.	Integer32 Constraints: range: 0-22	.1.3.6.1.4.1.353.5.3.2.3.2.2.1.3
lecsErrLogTimemandatory The sysUpTime when this entry was logged by the LECS.	TIMESTAMP Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.353.5.3.2.3.2.2.1.4

A (conceptual) table of statistics 
associated with all
LECS instances on the device.

lecsStatsEntry row .1.3.6.1.4.1.353.5.3.2.3.3.1.1

A (conceptual) row in the
lecsStatsTable which corresponds
to the statistics kept by a particular
instance of a LECS.

Indexes

lecsConfIndex

Column	Syntax	OID
lecsStatSuccessfulmandatory The number of CONFIGURE requests successfully granted since the agent was last initialized.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.2.3.3.1.1.1
lecsStatInBadFramesmandatory The number of mal formed CONFIGURE requests dropped by the LECS.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.2.3.3.1.1.2
lecsStatInvalidParammandatory The number of CONFIGURE requests rejected due to the invalid request parameters error.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.2.3.3.1.1.3
lecsStatInsufResmandatory The number of CONFIGURE requests rejected due to the insufficent resources to grant request error.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.2.3.3.1.1.4
lecsStatAccDeniedmandatory The number of CONFIGURE requests rejected due to the access denied error.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.2.3.3.1.1.5
lecsStatInvalidReqmandatory The number of CONFIGURE requests rejected due to the invalid requester-id error.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.2.3.3.1.1.6
lecsStatInvalidDestmandatory The number of CONFIGURE requests rejected due to the invalid destination error.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.2.3.3.1.1.7
lecsStatInvalidAddrmandatory The number of CONFIGURE requests rejected due to the invalid ATM address error.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.2.3.3.1.1.8
lecsStatNoConfmandatory The number of CONFIGURE requests rejected due to the LE Client is not recognized error.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.2.3.3.1.1.9
lecsStatConfErrormandatory The number of CONFIGURE requests rejected due to the LE_CONFIGURE error.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.2.3.3.1.1.10
lecsStatInsufInfomandatory The number of CONFIGURE requests rejected due to the insufficient information error.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.353.5.3.2.3.3.1.1.11