L2TP-MIB Table View

The L2TP Domain configuration table. This table
contains objects that can be used to configure
the operational characteristics of a tunnel
domain. There is a 1-1 correspondence between
conceptual rows of this table and conceptual
rows of the l2tpDomainStatsTable.

l2tpDomainConfigEntry row .1.3.6.1.2.1.10.95.1.2.1

An L2TP Domain configuration entry. An entry in this
table may correspond to a single endpoint or a group
of tunnel endpoints.

Indexes

l2tpDomainConfigId

Column	Syntax	OID
l2tpDomainConfigId The identifier, usually in the form of a Domain Name (full or partial), describing a single tunnel endpoint or a domain of tunnel endpoints. This is typically used as a 'handle' to identify the tunnel configuration requ…	OctetString Constraints: range: 1-80	.1.3.6.1.2.1.10.95.1.2.1.1
l2tpDomainConfigAdminState This object defines the administrative state of this tunnel domain. Setting this object to disabled(2) causes all tunnels to be immediately disconnected and no further tunnels to be either initiated or accepted. Note th…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.2.1.10.95.1.2.1.2
l2tpDomainConfigDrainTunnels Setting this object to 'true' will prevent any new tunnels and/or sessions from being either initiated or accepted but does NOT disconnect any active tunnels/sessions for this tunnel domain. Setting this object to true(…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.95.1.2.1.3
l2tpDomainConfigAuth This object describes how tunnel peers belonging to this domain are to be authenticated. The value simple(2) indicates that peers are authenticated simply by their host name as described in the Host Name AVP. The value…	Enumerationr/w Enumerated Values: 1 none 2 simple 3 challenge	.1.3.6.1.2.1.10.95.1.2.1.4
l2tpDomainConfigSecret This object is used to configure the shared secret used during the tunnel authentication phase of tunnel establishment. This object MUST be accessible only via requests using both authentication and privacy. The agent M…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.2.1.10.95.1.2.1.5
l2tpDomainConfigTunnelSecurity This object defines whether this tunnel domain requires that all tunnels are to be secured. The value of ipsec(3) indicates that all tunnel packets, control and session, have IP Security headers. The type…	Enumerationr/w Enumerated Values: 1 none 2 other 3 ipSec	.1.3.6.1.2.1.10.95.1.2.1.6
l2tpDomainConfigTunnelHelloInt This object defines the interval in which Hello (or keep-alive) packets are to be sent by local peers belonging to this tunnel domain. The value zero effectively disables the sending of Hello packets. This object may be…	secondsInteger32r/w Constraints: range: 0-3600	.1.3.6.1.2.1.10.95.1.2.1.7
l2tpDomainConfigTunnelIdleTO This object defines the period of time that an established tunnel belonging to this tunnel domain with no active sessions will wait before disconnecting the tunnel. A value of zero indicates that the tunnel will disconn…	secondsInteger32r/w Constraints: range: -1-86400	.1.3.6.1.2.1.10.95.1.2.1.8
l2tpDomainConfigControlRWS This object defines the control channel receive window size for tunnels belonging to this domain. It specifies the maximum number of packets the tunnel peer belonging to this domain can send without waiti…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.10.95.1.2.1.9
l2tpDomainConfigControlMaxRetx This object defines the maximum number of retransmissions which the L2TP stack will attempt for tunnels belonging to this domain before assuming that the peer is no longer responding.	Integer32r/w Constraints: range: 0-32	.1.3.6.1.2.1.10.95.1.2.1.10
l2tpDomainConfigControlMaxRetxTO This object defines the maximum retransmission timeout interval which the L2TP stack will wait for tunnels belonging to this domain before retransmitting a control packet that has not been acknowledged.	secondsInteger32r/w Constraints: range: 1-32	.1.3.6.1.2.1.10.95.1.2.1.11
l2tpDomainConfigPayloadSeq This object determines whether or not session payload packets will be requested to be sent with sequence numbers from tunnel peers belonging to this domain. The value onDemand(1) allows the L2TP implementation to initia…	Enumerationr/w Enumerated Values: 1 onDemand 2 never 3 always	.1.3.6.1.2.1.10.95.1.2.1.12
l2tpDomainConfigReassemblyTO This object defines the number of milliseconds that local peers of this tunnel domain will wait before processing payload packets that were received out of sequence (which are waiting for the packet(s) to put them in se…	L2tpMilliSecondsr/w Type Constraints: range: 0..2147483646	.1.3.6.1.2.1.10.95.1.2.1.13
l2tpDomainConfigProxyPPPAuth This object is used to configure the sending or acceptance of the PPP Proxy Authentication AVP's on the LAC or LNS.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.95.1.2.1.14
l2tpDomainConfigStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' must allow write-access at a minimum to: - l2tpDomainConfigAdminState and l2tpDomainC…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.10.95.1.2.1.15
l2tpDomainConfigStatus The status of this Domain entry. Columnar objects corresponding to this conceptual row may be modified according to their description clauses when this RowStatus object is 'active'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.95.1.2.1.16

The L2TP Domain Status and Statistics table. This
table contains objects that can be used to describe
the current status and statistics of a tunnel domain.
There is a 1-1 correspondence between conceptual
rows of this table and conceptual rows of the
l2tpDomainConfigTable.

l2tpDomainStatsEntry row .1.3.6.1.2.1.10.95.1.3.1

An L2TP Domain Stats entry. An entry in this table
may correspond to a single endpoint or a group of
tunnel endpoints.

Indexes

No indexes recorded

Column	Syntax	OID
l2tpDomainStatsTotalTunnels This object returns the total number of tunnels that have successfully reached the established state for this tunnel domain.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.1
l2tpDomainStatsFailedTunnels This object returns the number of tunnels that failed (eg: connection timeout, unsupported or malformed AVP's etc) to reach the established state for this tunnel domain.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.2
l2tpDomainStatsFailedAuths This object returns the number of failed tunnel connection attempts for this domain because the tunnel peer failed authentication.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.3
l2tpDomainStatsActiveTunnels This object returns the number of tunnels that are currently active for this domain.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.4
l2tpDomainStatsTotalSessions This object returns the total number of sessions that have successfully reached the established state for this tunnel domain.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.5
l2tpDomainStatsFailedSessions This object returns the number of sessions that failed (eg: connection timeout, unsupported or malformed AVP's etc) to reach the established state for this tunnel domain.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.6
l2tpDomainStatsActiveSessions This object returns the number of sessions that are currently active for this domain.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.7
l2tpDomainStatsDrainingTunnels This object indicates if this domain is draining off sessions from all tunnels.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.95.1.3.1.8
l2tpDomainStatsControlRxOctets This object returns the number of control channel octets received for this tunnel domain.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.9
l2tpDomainStatsControlRxPkts This object returns the number of control packets received for this tunnel domain.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.10
l2tpDomainStatsControlTxOctets This object returns the number of control channel octets that were transmitted to tunnel endpoints for this domain.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.11
l2tpDomainStatsControlTxPkts This object returns the number of control packets that were transmitted to tunnel endpoints for this domain.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.12
l2tpDomainStatsPayloadRxOctets This object returns the number of payload channel octets that were received for this tunnel domain.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.13
l2tpDomainStatsPayloadRxPkts This object returns the number of payload packets that were received for this tunnel domain.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.14
l2tpDomainStatsPayloadRxDiscs This object returns the number of received payload packets that were discarded by this tunnel domain.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.15
l2tpDomainStatsPayloadTxOctets This object returns the number of payload channel octets that were transmitted to tunnel peers within this tunnel domain.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.16
l2tpDomainStatsPayloadTxPkts This object returns the number of payload packets that were transmitted to tunnel peers within this tunnel domain.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.3.1.17
l2tpDomainStatsControlHCRxOctets This object is a 64-bit version of l2tpDomainStatsControlRxOctets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.95.1.3.1.18
l2tpDomainStatsControlHCRxPkts This object is a 64-bit version of l2tpDomainStatsControlRxPkts.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.95.1.3.1.19
l2tpDomainStatsControlHCTxOctets This object is a 64-bit version of l2tpDomainStatsControlTxOctets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.95.1.3.1.20
l2tpDomainStatsControlHCTxPkts This object is a 64-bit version of l2tpDomainStatsControlTxPkts.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.95.1.3.1.21
l2tpDomainStatsPayloadHCRxOctets This object is a 64-bit version of l2tpDomainStatsPayloadRxOctets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.95.1.3.1.22
l2tpDomainStatsPayloadHCRxPkts This object is a 64-bit version of l2tpDomainStatsPayloadRxPkts.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.95.1.3.1.23
l2tpDomainStatsPayloadHCRxDiscs This object is a 64-bit version of l2tpDomainStatsPayloadRxDiscs.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.95.1.3.1.24
l2tpDomainStatsPayloadHCTxOctets This object is a 64-bit version of l2tpDomainStatsPayloadTxOctets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.95.1.3.1.25
l2tpDomainStatsPayloadHCTxPkts This object is a 64-bit version of l2tpDomainStatsPayloadTxPkts.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.2.1.10.95.1.3.1.26

The L2TP tunnel configuration table. This
table contains objects that can be used to
(re)configure the operational characteristics
of a single L2TP tunnel. There is a 1-1
correspondence between conceptual rows of
this table and conceptual rows of the
l2tpTunnelStatsTable. Entries in this table
have the same persistency characteristics as
that of the tunnelConfigTable.

l2tpTunnelConfigEntry row .1.3.6.1.2.1.10.95.1.4.1

A L2TP tunnel interface configuration entry.
Entries in this table come and go as a result
of protocol interactions or on management
operations. The latter occurs when a row is
instantiated in the tunnelConfigTable row
…

Indexes

l2tpTunnelConfigIfIndex

Column	Syntax	OID
l2tpTunnelConfigIfIndex This value for this object is equal to the value of ifIndex of the Interfaces MIB for tunnel interfaces of type L2TP.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.95.1.4.1.1
l2tpTunnelConfigDomainId The tunnel domain that this tunnel belongs to. A LNS tunnel endpoint will typically inherit this value from the endpoint domain table. A LAC may be provided with this information during tunnel setup. When a zero length …	OctetStringr/w Constraints: range: 1-80	.1.3.6.1.2.1.10.95.1.4.1.2
l2tpTunnelConfigAuth This object describes how L2TP tunnel peers are to be authenticated. The value 'simple' indicates that peers are authenticated simply by their host name as described in the Host Name AVP. The value 'challenge' indicates…	Enumerationr/w Enumerated Values: 1 none 2 simple 3 challenge	.1.3.6.1.2.1.10.95.1.4.1.3
l2tpTunnelConfigSecret This object is used to configure the shared secret used during the tunnel authentication phase of tunnel establishment. This object cannot be modified when the tunnel is in a connecting or connected state…	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.2.1.10.95.1.4.1.4
l2tpTunnelConfigSecurity This object defines whether this tunnel is to be secured. The value of 'ipSec' indicates that all tunnel packets, control and session, have IP Security headers. The type of IP Security headers (AH, ESP etc) and how they…	Enumerationr/w Enumerated Values: 1 none 2 other 3 ipsec	.1.3.6.1.2.1.10.95.1.4.1.5
l2tpTunnelConfigHelloInterval This object defines the interval in which Hello (or keep-alive) packets are to be sent to the tunnel peer. The value zero effectively disables the sending of Hello packets. Modifications to this object have immediate e…	secondsInteger32r/w Constraints: range: 0-3600	.1.3.6.1.2.1.10.95.1.4.1.6
l2tpTunnelConfigIdleTimeout This object defines the period of time that an established tunnel with no sessions will wait before disconnecting the tunnel. A value of zero indicates that the tunnel will disconnect immediately after the last session …	secondsInteger32r/w Constraints: range: -1-86400	.1.3.6.1.2.1.10.95.1.4.1.7
l2tpTunnelConfigControlRWS This object defines the control channel receive window size. It specifies the maximum number of packets the tunnel peer can send without waiting for an acknowledgement from this peer. This object cannot be modified when…	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.2.1.10.95.1.4.1.8
l2tpTunnelConfigControlMaxRetx This object defines the number of retransmissions which the tunnel will attempt before assuming that the peer is no longer responding. A value of zero indicates that this peer will not attempt to retransmit an unacknowl…	Integer32r/w Constraints: range: 0-32	.1.3.6.1.2.1.10.95.1.4.1.9
l2tpTunnelConfigControlMaxRetxTO This object defines the maximum retransmission timeout interval which the tunnel will wait before retrans- mitting a control packet that has not been acknowledged. Modifications to this object have immedi…	secondsInteger32r/w Constraints: range: 1-32	.1.3.6.1.2.1.10.95.1.4.1.10
l2tpTunnelConfigPayloadSeq This object determines whether or not session payload packets will be requested to be sent with sequence numbers from tunnel peers belonging to this domain. The value onDemand(1) allows the L2TP implementation to initia…	Enumerationr/w Enumerated Values: 1 onDemand 2 never 3 always	.1.3.6.1.2.1.10.95.1.4.1.11
l2tpTunnelConfigReassemblyTO This object defines the number of milliseconds that this tunnel will wait before processing payload packets that were received out of sequence (which are waiting for the packet(s) to put them in sequence). A low value …	L2tpMilliSecondsr/w Type Constraints: range: 0..2147483646	.1.3.6.1.2.1.10.95.1.4.1.12
l2tpTunnelConfigTransport This object defines the underlying transport media that is in use for this tunnel entry. Different tunnel transports may define MIB extensions to the L2TP tunnel table to realize the transport layer. For example if the …	Enumerationr/w Enumerated Values: 1 other 2 none 3 udpIp 4 frameRelay 5 atm	.1.3.6.1.2.1.10.95.1.4.1.13
l2tpTunnelConfigDrainTunnel Setting this object to 'true' will prevent any new session from being either initiated or accepted but does NOT disconnect any active sessions for this tunnel. Note that when this occurs the l2tpTunnelStatsDrainingTunne…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.95.1.4.1.14
l2tpTunnelConfigProxyPPPAuth This object is used to configure the sending or acceptance of the session PPP Proxy Authentication AVP's on the LAC or LNS.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.95.1.4.1.15

The L2TP tunnel status and statistics table. This
table contains objects that can be used to describe
the current status and statistics of a single L2TP
tunnel. There is a 1-1 correspondence between
conceptual rows of this table and conceptual rows of
the l2tpTunnelConfigTable.

l2tpTunnelStatsEntry row .1.3.6.1.2.1.10.95.1.5.1

An L2TP tunnel interface stats entry.

Indexes

No indexes recorded

Column	Syntax	OID
l2tpTunnelStatsLocalTID This object contains the local tunnel Identifier.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.95.1.5.1.1
l2tpTunnelStatsRemoteTID This object contains the remote tunnel Identifier.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.95.1.5.1.2
l2tpTunnelStatsState This field contains the current state of the control tunnel.	Enumeration Enumerated Values: 1 tunnelIdle 2 tunnelConnecting 3 tunnelEstablished 4 tunnelDisconnecting	.1.3.6.1.2.1.10.95.1.5.1.3
l2tpTunnelStatsInitiated This object indicates whether the tunnel was initiated locally or by the remote tunnel peer.	Enumeration Enumerated Values: 1 locally 2 remotely	.1.3.6.1.2.1.10.95.1.5.1.4
l2tpTunnelStatsRemoteHostName This object contains the host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle this object should maintain its value from the last t…	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.10.95.1.5.1.5
l2tpTunnelStatsRemoteVendorName This object identifies the vendor name of the peer's L2TP implementation. If the tunnel is idle this object should maintain its value from the last time it was connected.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.10.95.1.5.1.6
l2tpTunnelStatsRemoteFirmwareRev This object contains the tunnel peer's firmware revision number. If the tunnel is idle this object should maintain its value from the last time it was connected.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.10.95.1.5.1.7
l2tpTunnelStatsRemoteProtocolVer This object describes the protocol version and revision of the tunnel peers implementation. The first octet contains the protocol version. The second octet contains the protocol revision.	OctetString Constraints: range: 2-2	.1.3.6.1.2.1.10.95.1.5.1.8
l2tpTunnelStatsInitialRemoteRWS This object contains the initial remote peer's receive window size as indicated by the tunnel peer (in the RWS AVP) during the tunnel establishment phase. If the tunnel is idle this object should maintain…	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.95.1.5.1.9
l2tpTunnelStatsBearerCaps This object describes the Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected.	Enumeration Enumerated Values: 1 none 2 digital 3 analog 4 digitalAnalog	.1.3.6.1.2.1.10.95.1.5.1.10
l2tpTunnelStatsFramingCaps This object describes the Framing Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected.	Enumeration Enumerated Values: 1 none 2 sync 3 async 4 syncAsync	.1.3.6.1.2.1.10.95.1.5.1.11
l2tpTunnelStatsControlRxPkts This object contains the number of control packets received on the tunnel.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.5.1.12
l2tpTunnelStatsControlRxZLB This object returns a count of the number of Zero Length Body control packet acknowledgement packets that were received.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.5.1.13
l2tpTunnelStatsControlOutOfSeq This object returns a count of the number of control packets that were not received in the correct order (as per the sequence number) on this tunnel including out of window packets.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.5.1.14
l2tpTunnelStatsControlOutOfWin This object contains the number of control packets that were received outside of the offered receive window. It is implementation specific as to whether these packets are queued or discarded.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.5.1.15
l2tpTunnelStatsControlTxPkts This object contains the number of control packets that were transmitted to the tunnel peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.5.1.16
l2tpTunnelStatsControlTxZLB This object contains the number of Zero Length Body control packets transmitted to the tunnel peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.5.1.17
l2tpTunnelStatsControlAckTO This object returns a count of the number of control packet timeouts due to the lack of a timely acknowledgement from the tunnel peer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.5.1.18
l2tpTunnelStatsCurrentRemoteRWS This object contains the current remote receive window size as determined by the local flow control mechanism employed.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.95.1.5.1.19
l2tpTunnelStatsTxSeq This object contains the next send sequence number for the control channel.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.95.1.5.1.20
l2tpTunnelStatsTxSeqAck This object contains the send sequence number that the tunnel peer has acknowledged for the control channel. The flow control state can be determined by subtracting the l2tpTunnelStatsTxSeq from l2tpTunnelStatsTxSeqAck …	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.95.1.5.1.21
l2tpTunnelStatsRxSeq This object contains the next receive sequence number expected to be received on this control channel.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.95.1.5.1.22
l2tpTunnelStatsRxSeqAck This object contains the last receive sequence number that was acknowledged back to the tunnel peer for the control channel.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.95.1.5.1.23
l2tpTunnelStatsTotalSessions This object contains the total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.5.1.24
l2tpTunnelStatsFailedSessions This object contains the total number of sessions that were initiated but failed to reach the established phase.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.5.1.25
l2tpTunnelStatsActiveSessions This object contains the total number of sessions in the established state for this tunnel.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.5.1.26
l2tpTunnelStatsLastResultCode This object contains the last value of the result code as described in the Result Code AVP which caused the tunnel to disconnect.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.95.1.5.1.27
l2tpTunnelStatsLastErrorCode This object contains the last value of the error code as described in the Result Code AVP which caused the tunnel to disconnect.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.95.1.5.1.28
l2tpTunnelStatsLastErrorMessage This object contains the last value of the optional message as described in the Result Code AVP which caused the tunnel to disconnect.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.10.95.1.5.1.29
l2tpTunnelStatsDrainingTunnel This object indicates if this tunnel is draining off sessions. This object will return false(2) when the tunnel is not draining sessions or after the last session has disconnected when the tunnel is in the draining stat…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.95.1.5.1.30

The L2TP session status and statistics table. This
table contains the objects that can be used to
describe the current status and statistics of a
single L2TP tunneled session.

l2tpSessionStatsEntry row .1.3.6.1.2.1.10.95.1.7.1

An L2TP session interface stats entry.

Indexes

l2tpSessionStatsTunnelIfIndex l2tpSessionStatsLocalSID

Column	Syntax	OID
l2tpSessionStatsTunnelIfIndex This object identifies the session's associated L2TP tunnel ifIndex value.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.95.1.7.1.1
l2tpSessionStatsIfIndex This object identifies the ifIndex value of the interface from which PPP packets are being tunneled. For example this could be a DS0 ifIndex on a LAC or it would be the PPP ifIndex on the LNS.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.95.1.7.1.2
l2tpSessionStatsLocalSID This object contains the local assigned session identifier for this session.	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.95.1.7.1.3
l2tpSessionStatsRemoteSID This object contains the remote assigned session identifier for this session. When a session is starting this value may be zero until the remote tunnel endpoint has responded.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.95.1.7.1.4
l2tpSessionStatsUserName This object identifies the peer session name on this interface. This is typically the login name of the remote user. If the user name is unknown to the local tunnel peer then this object will contain a null string.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.10.95.1.7.1.5
l2tpSessionStatsState This object contains the current state of the session.	Enumeration Enumerated Values: 1 sessionIdle 2 sessionConnecting 3 sessionEstablished 4 sessionDisconnecting	.1.3.6.1.2.1.10.95.1.7.1.6
l2tpSessionStatsCallType This object indicates the type of call and the role this tunnel peer is providing for this session. For example, lacIncoming(1) indicates that this tunnel peer is acting as a LAC and generated a Incoming-Call-Request to…	Enumeration Enumerated Values: 1 lacIncoming 2 lnsIncoming 3 lacOutgoing 4 lnsOutgoing	.1.3.6.1.2.1.10.95.1.7.1.7
l2tpSessionStatsCallSerialNumber This object contains the serial number that has been assigned to this session.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.7.1.8
l2tpSessionStatsTxConnectSpeed This object returns the last known transmit baud rate for this session.	bits per secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.7.1.9
l2tpSessionStatsRxConnectSpeed This object returns the last known receive baud rate for this session established.	bits per secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.7.1.10
l2tpSessionStatsCallBearerType This object describes the bearer type of this session.	Enumeration Enumerated Values: 1 none 2 digital 3 analog	.1.3.6.1.2.1.10.95.1.7.1.11
l2tpSessionStatsFramingType This object describes the framing type of this session.	Enumeration Enumerated Values: 1 none 2 sync 3 async	.1.3.6.1.2.1.10.95.1.7.1.12
l2tpSessionStatsPhysChanId This object contains the physical channel identifier for the session.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.7.1.13
l2tpSessionStatsDNIS This object identifies the Dialed Number Information String that the LAC obtained from the network for the session. If no DNIS was provided then a null string will be returned.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.10.95.1.7.1.14
l2tpSessionStatsCLID This object identifies the Calling Line ID that the LAC obtained from the network for the session. If no CLID was provided then a null string will be returned.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.10.95.1.7.1.15
l2tpSessionStatsSubAddress This object identifies the Sub Address that the LAC obtained from the network for the session. If no Sub Address was provided then a null string will be returned.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.10.95.1.7.1.16
l2tpSessionStatsPrivateGroupID This object identifies the Private Group Identifier used for this tunneled session. If no Private Group Identifier was provided then a null string will be returned.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.2.1.10.95.1.7.1.17
l2tpSessionStatsProxyLcp Indicates whether the LAC performed proxy LCP for this session.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.10.95.1.7.1.18
l2tpSessionStatsAuthMethod This object contains the proxy authentication method employed by the LAC for the session. If l2tpSessionProxyLcp is false(2) this object should not be interpreted.	Enumeration Enumerated Values: 1 none 2 text 3 pppChap 4 pppPap 5 pppEap 6 pppMsChapV1 7 pppMsChapV2 8 other	.1.3.6.1.2.1.10.95.1.7.1.19
l2tpSessionStatsSequencingState This object defines which tunnel peers have requested payload sequencing. The value of both(4) indicates that both peers have requested payload sequencing.	Enumeration Enumerated Values: 1 none 2 remote 3 local 4 both	.1.3.6.1.2.1.10.95.1.7.1.20
l2tpSessionStatsOutSequence This object returns the total number of packets received for this session which were received out of sequence.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.7.1.21
l2tpSessionStatsReassemblyTO This object returns the number of reassembly timeouts that have occurred for this session.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.10.95.1.7.1.22
l2tpSessionStatsTxSeq This object contains the next send sequence number for for this session.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.95.1.7.1.23
l2tpSessionStatsRxSeq This object contains the next receive sequence number expected to be received on this session.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.95.1.7.1.24

The L2TP Tunnel index mapping table. This table
is intended to assist management applications
to quickly determine what the ifIndex value is
for a given local tunnel identifier.

l2tpTunnelMapEntry row .1.3.6.1.2.1.10.95.1.8.1

An L2TP tunnel index map entry.

Indexes

l2tpTunnelMapLocalTID

Column	Syntax	OID
l2tpTunnelMapLocalTID This object contains the local tunnel Identifier.	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.95.1.8.1.1
l2tpTunnelMapIfIndex This value for this object is equal to the value of ifIndex of the Interfaces MIB for tunnel interfaces of type L2TP.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.95.1.8.1.2

The L2TP Session index mapping table. This table
is intended to assist management applications
to map interfaces to a tunnel and session
identifier.

l2tpSessionMapEntry row .1.3.6.1.2.1.10.95.1.9.1

An L2TP Session index map entry.

Indexes

l2tpSessionMapIfIndex

Column	Syntax	OID
l2tpSessionMapIfIndex This object identifies the ifIndex value of the interface which is receiving or sending its packets over an L2TP tunnel. For example this could be a DS0 ifIndex on a LAC or a PPP ifIndex on the LNS.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.95.1.9.1.1
l2tpSessionMapTunnelIfIndex This object identifies the sessions associated L2TP tunnel ifIndex value. When this object is set it provides a binding between a particular interface identified by l2tpSessionMapIfIndex to a particular tunnel.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.95.1.9.1.2
l2tpSessionMapLocalSID This object contains the local assigned session identifier for this session.	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.10.95.1.9.1.3
l2tpSessionMapStatus The status of this session map entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.10.95.1.9.1.4

The L2TP UDP/IP transport stats table. This table
contains objects that can be used to describe the
current status and statistics of the UDP/IP L2TP
tunnel transport.

l2tpUdpStatsEntry row .1.3.6.1.2.1.10.95.3.1.1.2.1

An L2TP UDP/IP transport stats entry.

Indexes

l2tpUdpStatsIfIndex

Column	Syntax	OID
l2tpUdpStatsIfIndex This value for this object is equal to the value of ifIndex of the Interfaces MIB for tunnel interfaces of type L2TP and which have a L2TP transport of UDP/IP.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.10.95.3.1.1.2.1.1
l2tpUdpStatsPeerPort This object reflects the peer's UDP port number used for this tunnel. When not known a value of zero should be returned.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.95.3.1.1.2.1.2
l2tpUdpStatsLocalPort This object reflects the local UDP port number that this tunnel is bound to.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.10.95.3.1.1.2.1.3