L2TP-MIB
The MIB module that describes managed objects of
general use by the Layer Two Transport Protocol.
- Source file
L2TP-MIB- Last revised
- Identity
l2tp- Base OID
1.3.6.1.2.1.10.95
Imported Objects
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) transmission Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the rfc MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'L2TP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'L2TP-MIB::l2tp'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'L2TP-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'L2TP-MIB::l2tp'
Objects (155)
Showing 155 of 155 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.2.1.10.95 |
||
.1.3.6.1.2.1.10.95.0 |
||
.1.3.6.1.2.1.10.95.1 |
||
.1.3.6.1.2.1.10.95.1.1 |
||
.1.3.6.1.2.1.10.95.1.1.1 |
||
|
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.1.1.1 |
|
|
.1.3.6.1.2.1.10.95.1.1.1.2 |
|
.1.3.6.1.2.1.10.95.1.1.2 |
||
|
OctetString
|
.1.3.6.1.2.1.10.95.1.1.2.1 |
|
.1.3.6.1.2.1.10.95.1.1.2.2 |
||
.1.3.6.1.2.1.10.95.1.1.2.3 |
||
.1.3.6.1.2.1.10.95.1.1.2.4 |
||
.1.3.6.1.2.1.10.95.1.2 |
||
.1.3.6.1.2.1.10.95.1.2.1 |
||
|
OctetString
|
.1.3.6.1.2.1.10.95.1.2.1.1 |
|
|
Integer32
|
.1.3.6.1.2.1.10.95.1.2.1.10 |
|
|
secondsInteger32
|
.1.3.6.1.2.1.10.95.1.2.1.11 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.2.1.12 |
|
.1.3.6.1.2.1.10.95.1.2.1.13 |
||
.1.3.6.1.2.1.10.95.1.2.1.14 |
||
.1.3.6.1.2.1.10.95.1.2.1.15 |
||
.1.3.6.1.2.1.10.95.1.2.1.16 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.2.1.2 |
|
.1.3.6.1.2.1.10.95.1.2.1.3 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.2.1.4 |
|
|
OctetString
|
.1.3.6.1.2.1.10.95.1.2.1.5 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.2.1.6 |
|
|
secondsInteger32
|
.1.3.6.1.2.1.10.95.1.2.1.7 |
|
|
secondsInteger32
|
.1.3.6.1.2.1.10.95.1.2.1.8 |
|
|
Integer32
|
.1.3.6.1.2.1.10.95.1.2.1.9 |
|
.1.3.6.1.2.1.10.95.1.3 |
||
.1.3.6.1.2.1.10.95.1.3.1 |
||
.1.3.6.1.2.1.10.95.1.3.1.1 |
||
.1.3.6.1.2.1.10.95.1.3.1.10 |
||
.1.3.6.1.2.1.10.95.1.3.1.11 |
||
.1.3.6.1.2.1.10.95.1.3.1.12 |
||
.1.3.6.1.2.1.10.95.1.3.1.13 |
||
.1.3.6.1.2.1.10.95.1.3.1.14 |
||
.1.3.6.1.2.1.10.95.1.3.1.15 |
||
.1.3.6.1.2.1.10.95.1.3.1.16 |
||
.1.3.6.1.2.1.10.95.1.3.1.17 |
||
.1.3.6.1.2.1.10.95.1.3.1.18 |
||
.1.3.6.1.2.1.10.95.1.3.1.19 |
||
.1.3.6.1.2.1.10.95.1.3.1.2 |
||
.1.3.6.1.2.1.10.95.1.3.1.20 |
||
.1.3.6.1.2.1.10.95.1.3.1.21 |
||
.1.3.6.1.2.1.10.95.1.3.1.22 |
||
.1.3.6.1.2.1.10.95.1.3.1.23 |
||
.1.3.6.1.2.1.10.95.1.3.1.24 |
||
.1.3.6.1.2.1.10.95.1.3.1.25 |
||
.1.3.6.1.2.1.10.95.1.3.1.26 |
||
.1.3.6.1.2.1.10.95.1.3.1.3 |
||
.1.3.6.1.2.1.10.95.1.3.1.4 |
||
.1.3.6.1.2.1.10.95.1.3.1.5 |
||
.1.3.6.1.2.1.10.95.1.3.1.6 |
||
.1.3.6.1.2.1.10.95.1.3.1.7 |
||
.1.3.6.1.2.1.10.95.1.3.1.8 |
||
.1.3.6.1.2.1.10.95.1.3.1.9 |
||
.1.3.6.1.2.1.10.95.1.4 |
||
.1.3.6.1.2.1.10.95.1.4.1 |
||
.1.3.6.1.2.1.10.95.1.4.1.1 |
||
|
secondsInteger32
|
.1.3.6.1.2.1.10.95.1.4.1.10 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.4.1.11 |
|
.1.3.6.1.2.1.10.95.1.4.1.12 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.4.1.13 |
|
.1.3.6.1.2.1.10.95.1.4.1.14 |
||
.1.3.6.1.2.1.10.95.1.4.1.15 |
||
|
OctetString
|
.1.3.6.1.2.1.10.95.1.4.1.2 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.4.1.3 |
|
|
OctetString
|
.1.3.6.1.2.1.10.95.1.4.1.4 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.4.1.5 |
|
|
secondsInteger32
|
.1.3.6.1.2.1.10.95.1.4.1.6 |
|
|
secondsInteger32
|
.1.3.6.1.2.1.10.95.1.4.1.7 |
|
|
Integer32
|
.1.3.6.1.2.1.10.95.1.4.1.8 |
|
|
Integer32
|
.1.3.6.1.2.1.10.95.1.4.1.9 |
|
.1.3.6.1.2.1.10.95.1.5 |
||
.1.3.6.1.2.1.10.95.1.5.1 |
||
|
Integer32
|
.1.3.6.1.2.1.10.95.1.5.1.1 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.5.1.10 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.5.1.11 |
|
.1.3.6.1.2.1.10.95.1.5.1.12 |
||
.1.3.6.1.2.1.10.95.1.5.1.13 |
||
.1.3.6.1.2.1.10.95.1.5.1.14 |
||
.1.3.6.1.2.1.10.95.1.5.1.15 |
||
.1.3.6.1.2.1.10.95.1.5.1.16 |
||
.1.3.6.1.2.1.10.95.1.5.1.17 |
||
.1.3.6.1.2.1.10.95.1.5.1.18 |
||
|
Unsigned32
|
.1.3.6.1.2.1.10.95.1.5.1.19 |
|
|
Integer32
|
.1.3.6.1.2.1.10.95.1.5.1.2 |
|
|
Integer32
|
.1.3.6.1.2.1.10.95.1.5.1.20 |
|
|
Integer32
|
.1.3.6.1.2.1.10.95.1.5.1.21 |
|
|
Integer32
|
.1.3.6.1.2.1.10.95.1.5.1.22 |
|
|
Integer32
|
.1.3.6.1.2.1.10.95.1.5.1.23 |
|
.1.3.6.1.2.1.10.95.1.5.1.24 |
||
.1.3.6.1.2.1.10.95.1.5.1.25 |
||
.1.3.6.1.2.1.10.95.1.5.1.26 |
||
|
Integer32
|
.1.3.6.1.2.1.10.95.1.5.1.27 |
|
|
Integer32
|
.1.3.6.1.2.1.10.95.1.5.1.28 |
|
.1.3.6.1.2.1.10.95.1.5.1.29 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.5.1.3 |
|
.1.3.6.1.2.1.10.95.1.5.1.30 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.5.1.4 |
|
.1.3.6.1.2.1.10.95.1.5.1.5 |
||
.1.3.6.1.2.1.10.95.1.5.1.6 |
||
.1.3.6.1.2.1.10.95.1.5.1.7 |
||
|
OctetString
|
.1.3.6.1.2.1.10.95.1.5.1.8 |
|
|
Integer32
|
.1.3.6.1.2.1.10.95.1.5.1.9 |
|
.1.3.6.1.2.1.10.95.1.7 |
||
.1.3.6.1.2.1.10.95.1.7.1 |
||
.1.3.6.1.2.1.10.95.1.7.1.1 |
||
|
bits per secondSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.10.95.1.7.1.10 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.7.1.11 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.7.1.12 |
|
.1.3.6.1.2.1.10.95.1.7.1.13 |
||
.1.3.6.1.2.1.10.95.1.7.1.14 |
||
.1.3.6.1.2.1.10.95.1.7.1.15 |
||
.1.3.6.1.2.1.10.95.1.7.1.16 |
||
.1.3.6.1.2.1.10.95.1.7.1.17 |
||
.1.3.6.1.2.1.10.95.1.7.1.18 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.7.1.19 |
|
.1.3.6.1.2.1.10.95.1.7.1.2 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.7.1.20 |
|
.1.3.6.1.2.1.10.95.1.7.1.21 |
||
.1.3.6.1.2.1.10.95.1.7.1.22 |
||
|
Integer32
|
.1.3.6.1.2.1.10.95.1.7.1.23 |
|
|
Integer32
|
.1.3.6.1.2.1.10.95.1.7.1.24 |
|
|
Integer32
|
.1.3.6.1.2.1.10.95.1.7.1.3 |
|
|
Integer32
|
.1.3.6.1.2.1.10.95.1.7.1.4 |
|
.1.3.6.1.2.1.10.95.1.7.1.5 |
||
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.7.1.6 |
|
|
Enumeration
|
.1.3.6.1.2.1.10.95.1.7.1.7 |
|
.1.3.6.1.2.1.10.95.1.7.1.8 |
||
|
bits per secondSNMPv2-SMIUnsigned32
|
.1.3.6.1.2.1.10.95.1.7.1.9 |
|
.1.3.6.1.2.1.10.95.1.8 |
||
.1.3.6.1.2.1.10.95.1.8.1 |
||
|
Integer32
|
.1.3.6.1.2.1.10.95.1.8.1.1 |
|
.1.3.6.1.2.1.10.95.1.8.1.2 |
||
.1.3.6.1.2.1.10.95.1.9 |
||
.1.3.6.1.2.1.10.95.1.9.1 |
||
.1.3.6.1.2.1.10.95.1.9.1.1 |
||
.1.3.6.1.2.1.10.95.1.9.1.2 |
||
|
Integer32
|
.1.3.6.1.2.1.10.95.1.9.1.3 |
|
.1.3.6.1.2.1.10.95.1.9.1.4 |
||
.1.3.6.1.2.1.10.95.3 |
||
.1.3.6.1.2.1.10.95.3.1 |
||
.1.3.6.1.2.1.10.95.3.1.1 |
||
.1.3.6.1.2.1.10.95.3.1.1.2 |
||
.1.3.6.1.2.1.10.95.3.1.1.2.1 |
||
.1.3.6.1.2.1.10.95.3.1.1.2.1.1 |
||
|
Integer32
|
.1.3.6.1.2.1.10.95.3.1.1.2.1.2 |
|
|
Integer32
|
.1.3.6.1.2.1.10.95.3.1.1.2.1.3 |
|
.1.3.6.1.2.1.10.95.3.1.2 |
||
.1.3.6.1.2.1.10.95.4 |
||
.1.3.6.1.2.1.10.95.4.1 |
||
.1.3.6.1.2.1.10.95.4.2 |
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- SNMP-FRAMEWORK-MIBrfc
- L2TP-MIBrfcselected
Type Definitions (1)
| Integer32 |
range: 0..2147483646 |
Conformance Groups (8)
Compliance Statements (2)
OID
.1.3.6.1.2.1.10.95.4.2.1When this MIB is implemented with support for
read-create and read-write, then such an
implementation can claim full compliance. Such
an implementation can then be both monitored
and configured with this MIB.
read-create and read-write, then such an
implementation can claim full compliance. Such
an implementation can then be both monitored
and configured with this MIB.
Required groups
| mandatory | l2tpConfigGroup | |
| mandatory | l2tpStatsGroup | |
| mandatory | l2tpTrapGroup | |
| optional | l2tpIpUdpGroup |
This group is mandatory for implementations that support L2TP over UDP/IP. |
| optional | l2tpDomainGroup |
This group is optional for L2TP devices that group tunnel endpoints into tunnel domains. |
| optional | l2tpMappingGroup |
This group is optional for L2TP devices that provide index mapping. |
| optional | l2tpSecurityGroup |
This group is optional for SNMP agents which support both authentication and privacy of SNMP messages for the management of L2TP keys. |
| optional | l2tpHCPacketGroup |
This group is mandatory for implementations that support the l2tpDomainGroup AND could potentially overflow the L2TP Domain 32-bit counters is less than one hour. |
OID
.1.3.6.1.2.1.10.95.4.2.2When this MIB is implemented without support for
read-create and read-write (i.e. in read-only mode),
then such an implementation can claim read-only
compliance. Such an implementation can then be
monitored but can not be configured with this MIB.
read-create and read-write (i.e. in read-only mode),
then such an implementation can claim read-only
compliance. Such an implementation can then be
monitored but can not be configured with this MIB.
Required groups
| mandatory | l2tpConfigGroup | |
| mandatory | l2tpStatsGroup | |
| mandatory | l2tpTrapGroup | |
| optional | l2tpIpUdpGroup |
This group is mandatory for implementations that support L2TP over UDP/IP. |
| optional | l2tpDomainGroup |
This group is optional for L2TP devices that group tunnel endpoints into tunnel domains. |
| optional | l2tpMappingGroup |
This group is optional for L2TP devices that provide index mapping. |
| optional | l2tpSecurityGroup |
This group is optional for SNMP agents which support both authentication and privacy of SNMP messages for the management of L2TP keys. |
| optional | l2tpHCPacketGroup |
This group is mandatory for implementations that support the l2tpDomainGroup AND could potentially overflow the L2TP Domain 32-bit counters is less than one hour. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| l2tpAdminState | readonly | Write access is not required. | |
| l2tpDrainTunnels | readonly | Write access is not required. | |
| l2tpTunnelConfigDomainId | readonly | Write access is not required. | |
| l2tpTunnelConfigHelloInterval | readonly | Write access is not required. | |
| l2tpTunnelConfigIdleTimeout | readonly | Write access is not required. | |
| l2tpTunnelConfigControlRWS | readonly | Write access is not required. | |
| l2tpTunnelConfigControlMaxRetx | readonly | Write access is not required. | |
| l2tpTunnelConfigControlMaxRetxTO | readonly | Write access is not required. | |
| l2tpTunnelConfigPayloadSeq | readonly | Write access is not required. | |
| l2tpTunnelConfigReassemblyTO | readonly | Write access is not required. | |
| l2tpTunnelConfigTransport | readonly | Write access is not required. | |
| l2tpTunnelConfigDrainTunnel | readonly | Write access is not required. | |
| l2tpTunnelConfigProxyPPPAuth | readonly | Write access is not required. | |
| l2tpDomainConfigAdminState | readonly | Write access is not required. | |
| l2tpDomainConfigDrainTunnels | readonly | Write access is not required. | |
| l2tpDomainConfigTunnelHelloInt | readonly | Write access is not required. | |
| l2tpDomainConfigTunnelIdleTO | readonly | Write access is not required. | |
| l2tpDomainConfigControlRWS | readonly | Write access is not required. | |
| l2tpDomainConfigControlMaxRetx | readonly | Write access is not required. | |
| l2tpDomainConfigControlMaxRetxTO | readonly | Write access is not required. | |
| l2tpDomainConfigPayloadSeq | readonly | Write access is not required. | |
| l2tpDomainConfigReassemblyTO | readonly | Write access is not required. | |
| l2tpDomainConfigProxyPPPAuth | readonly | Write access is not required. | |
| l2tpDomainConfigStorageType | readonly | Write access is not required. | |
| l2tpDomainConfigStatus | readonly | Write access is not required. | |
| l2tpSessionMapTunnelIfIndex | readonly | Write access is not required. | |
| l2tpSessionMapStatus | readonly | Write access is not required. | |
| l2tpDomainConfigAuth | readonly | Write access is not required. | |
| l2tpDomainConfigSecret | readonly | Write access is not required. | |
| l2tpDomainConfigTunnelSecurity | readonly | Write access is not required. | |
| l2tpTunnelConfigAuth | readonly | Write access is not required. | |
| l2tpTunnelConfigSecret | readonly | Write access is not required. | |
| l2tpTunnelConfigSecurity | readonly | Write access is not required. |
Notifications / Traps (1)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.2.1.10.95.0.1 |
A l2tpTunnelAuthFailure trap signifies that an
attempt to establish a tunnel to a remote peer has failed authentication. |