IPE-SYSTEM-MIB Table View

ipeSysOpProgramPmonRmonClear

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.1.3.3.1.2

PMON data clear control
0:FIXED VALUE 1:REQUEST

ipeSysOpProgramPmonRmonClearResult

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.5.1.3.3.1.3

PMON data clear control response
1:COMPLETED
2:FAILED
3:EXECUTING

Enumeration

Enumerated Values:

0	invalid
1	completed
2	failed
3	executing

.1.3.6.1.4.1.119.2.3.69.5.1.3.3.1.4

ipeFsFileInfoTable

table

.1.3.6.1.4.1.119.2.3.69.5.2.1 · 1 row entry · 12 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeFsFileInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeFsFileInfoTable'

Table of file information.

ipeFsFileInfoEntry row .1.3.6.1.4.1.119.2.3.69.5.2.1.1

Entry of file information.

Indexes

ipeFsFileInfoIndex

Column Syntax OID

ipeFsFileInfoIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.2.1.1.1

ipeFsFileInfoNEAddress

reserved.

ipeFsUpdateFileStatusDetail

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.2.1.1.2

ipeFsFileListType

Type for acquisition

0:Invalidity
1: IDU
2: ODU
3: MODEM Parameter
4: FPGA(Other slot)
5: FPGA(Ctrl)
6: MSE
7: Software Key License
8: Network Config
9: Equipment Config
10: User Config
11: Server Certifi…

Enumerationr/w

Enumerated Values:

0	invalid
1	idu
2	odu
3	mdprm
4	raFpga
5	ipeFpga
7	softkey
8	cfgNet
9	cfgEqu
10	cfgUser
11	https
12	pmon
13	rmon
14	log
15	inventory
16	mac
17	all

.1.3.6.1.4.1.119.2.3.69.5.2.1.1.3

ipeFsFileListCurrent

Current file list (Flash-ROM).

The list of the type set to ipeFsFileListType is acquired.

Form of file list:

It's 1 item by 'file name (It included in a path),file
size,CRC…

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.5.2.1.1.4

ipeFsFileListTemp

Temporary file list (DRAM).

The list of the type set to ipeFsFileListType is acquired.

Form of file list:

It's 1 item by 'file name (It isn't included in a pass),file
size,C…

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.5.2.1.1.5

ipeFsUpdateFileDetail

File update control.

Thing to specify object file after it downloads it by
'ipeSysOpFileDownloadCtrl','ipeFsUsbCommand' and to demand file
update.

Ex) Filename1

*The object f…

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.5.2.1.1.6

ipeFsUpdateFileStatus

Update result.
0:Invalidity
1:Success
2:Failed
3:Executing
4:Checking
5:Success but some restricted UserName(s) are ignored

*'0:Invalidity' is used as an initial state.

*The slot result of …

Enumeration

Enumerated Values:

0	invalid
1	success
2	failure
3	executing
4	checking
5	successWithoutRestrictedUser

.1.3.6.1.4.1.119.2.3.69.5.2.1.1.7

Update result is detailed.

OCT: Update result of each slot
1: Completed
2: Failed

The slot for which the current state is used becomes the
following.

OCT[0] : Ma…

OctetString

Constraints:
range: 42-42

.1.3.6.1.4.1.119.2.3.69.5.2.1.1.8

ipeFsUpdateFileProgressBase

Progress of update (denominator).

*Pertinent details: ipeSysOpFileDownloadModule
*Pertinent details: ipeFsUpdateFileStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.5.2.1.1.9

ipeFsUpdateFileProgress

Progress of update (molecule).

*Pertinent details: ipeSysOpFileDownloadModule
*Pertinent details: ipeFsUpdateFileStatus

ipeFsUpdateFileUpdateList

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.5.2.1.1.10

Definition of update slot number.

Form of file list:
When downloading it to ODU/FPGA/MDPRM, the forwarding site slot
number is enumerated by a comma end.

Ex) 0,5,1,6,10...
The slot number…

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.5.2.1.1.11

ipeFsUpdateFileConfigPartial

Specify Equipment Configuration Partial Download pattern.
If this object is set with ipeFsUpdateFileDetail, the system will
perform the partial download, otherwise the system will perform
the normal download. And Partia…

OctetStringr/w

Constraints:
range: 4-4

.1.3.6.1.4.1.119.2.3.69.5.2.1.1.12

ipeFsUsbInfoTable

table

.1.3.6.1.4.1.119.2.3.69.5.2.2 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeFsUsbInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeFsUsbInfoTable'

Table of USB memory information.

ipeFsUsbInfoEntry row .1.3.6.1.4.1.119.2.3.69.5.2.2.1

Entry of USB mamory information.

Indexes

ipeFsUsbInfoIndex

Column Syntax OID

ipeFsUsbInfoIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.2.2.1.1

ipeFsUsbInfoNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.2.2.1.2

ipeFsUsbCommand

USB control mode/USB file path/Program type specification.

[Mode],[Arg1],[Type]
Mode:USB control mode
0:DL, 1:UL
Arg1:object file path -1 (original file path (path from a
chroot subordinate) When …

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.5.2.2.1.3

ipeFsUsbProcStatus

Status of USB memory control result.

The classification of a setting value and the meaning are as
follows.
0:Invalidity
1:NORMAL:Normal end
2:NORMAL:Executing
98:ERROR:The lack of free space on dis…

Enumeration

Enumerated Values:

0	invalid
1	completed
2	executing
98	diskFullError
99	noSuchFileError
101	unKnownFileError
102	notInsertError
103	accessError
127	otherError

.1.3.6.1.4.1.119.2.3.69.5.2.2.1.4

ipeFsUsbList

File list format.

Form of file list:

It's 1 item by 'file name (path from a chroot subordinate),file
size,CRC'.
Each item is divided at space.

*CRC is fixed '0'.
…

SNMPv2-TCDisplayString

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.119.2.3.69.5.2.2.1.5

ipeFsUsbConnectStatus

Status of connection USB memory.

1:Connect
2:Not connect

Enumeration

Enumerated Values:

1	usbConnect
2	usbNoConnect

.1.3.6.1.4.1.119.2.3.69.5.2.2.1.6

ipeCfgSystemTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgSystemTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgSystemTable'

Table of System Item Information.

ipeCfgSystemEntry row .1.3.6.1.4.1.119.2.3.69.5.3.1.1

Entry of System Item Information.

Indexes

ipeCfgSystemIndex

Column	Syntax	OID
ipeCfgSystemIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.5.3.1.1.1`
ipeCfgSystemNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.3.1.1.2`
ipeCfgNeName PASOLINK unit name. White space characters are not allowed for head or tail of characters.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.5.3.1.1.3`
ipeCfgAreaName Area name. White space characters are not allowed for head or tail of characters.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.5.3.1.1.4`
ipeCfgMemo Memorandum. White space characters are not allowed for head or tail of characters.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.5.3.1.1.5`

ipeCfgOemTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.2 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgOemTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgOemTable'

Table of Equipment Item Information.

ipeCfgOemEntry row .1.3.6.1.4.1.119.2.3.69.5.3.2.1

Entry of Equipment Item Information.

Indexes

ipeCfgOemIndex

Column	Syntax	OID
ipeCfgOemIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.5.3.2.1.1`
ipeCfgOemNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.3.2.1.2`
ipeCfgOemSysDescr System Description. The space of the begininng and end dose not permit it.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.5.3.2.1.3`
ipeCfgOemSysContact System contact. The space of the begininng and end dose not permit it.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.5.3.2.1.4`
ipeCfgOemSysName System name. The space of the begininng and end dose not permit it.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.5.3.2.1.5`
ipeCfgOemSysLocation System location. The space of the begininng and end dose not permit it.	SNMPv2-TCDisplayStringr/w Type Constraints: `range: 0..255` Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	`.1.3.6.1.4.1.119.2.3.69.5.3.2.1.6`

ipeCfgAuxInTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.3.1 · 1 row entry · 9 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgAuxInTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgAuxInTable'

Aux Input Table

ipeCfgAuxInEntry row .1.3.6.1.4.1.119.2.3.69.5.3.3.1.1

Indexes

ipeCfgAuxInIndex

Column Syntax OID

ipeCfgAuxInIndex

Index of this table.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.1

ipeCfgAuxInNEAddress

reserved.

ipeCfgNtpServiceNEAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.2

ipeCfgAuxInItemName

Item Name

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.3

ipeCfgAuxInItemType

Item Type

Enumerationr/w

Enumerated Values:

1	alarmInOpen
2	alarmInClose
3	status

.1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.4

ipeCfgAuxInOpenState

Status Strings (Event Off (Open))

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.5

ipeCfgAuxInCloseState

Status Strings (Event On (Close))

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.6

ipeCfgAuxInSeverity

Severity (X.733)

Enumerationr/w

Enumerated Values:

0	invalid
1	critical
2	major
3	minor
4	warning

.1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.7

ipeCfgAuxInAlarmType

Alarm Type (X.733)

AlarmTypeValuer/w

Type Values:

0	invalid
1	communicationsAlarm
2	qualityOfServiceAlarm
3	processingErrorAlarm
4	equipmentAlarm
5	environmentalAlarm
6	integrityViolationAlarm
7	operationalViolationAlarm
8	physicalViolationAlarm
9	securityViolationAlarm
10	timeDomainViolationAlarm

.1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.8

ipeCfgAuxInProbableCause

Probable Cause (X.733)

ProbableCauseValuer/w

Type Values:

0	invalid
1	aIS
2	callSetUpFailure
3	degradedSignal
4	farEndReceiverFailure
5	framingError
6	lossOfFrame
7	lossOfPointer
8	lossOfSignal
9	payloadTypeMismatch
10	transmissionError
11	remoteAlarmInterface
12	excessiveBER
13	pathTraceMismatch
14	unavailable
15	signalLabelMismatch
16	lossOfMultiFrame
17	receiveFailure
18	transmitFailure
19	modulationFailure
20	demodulationFailure
21	broadcastChannelFailure
22	connectionEstablishmentError
23	invalidMessageReceived
24	localNodeTransmissionError
25	remoteNodeTransmissionError
26	routingFailure
51	backplaneFailure
52	dataSetProblem
53	equipmentIdentifierDuplication
54	externalIFDeviceProblem
55	lineCardProblem
56	multiplexerProblem
57	nEIdentifierDuplication
58	powerProblem
59	processorProblem
60	protectionPathFailure
61	receiverFailure
62	replaceableUnitMissing
63	replaceableUnitTypeMismatch
64	synchronizationSourceMismatch
65	terminalProblem
66	timingProblem
67	transmitterFailure
68	trunkCardProblem
69	replaceableUnitProblem
70	realTimeClockFailure
71	antennaFailure
72	batteryChargingFailure
73	diskFailure
74	frequencyHoppingFailure
75	iODeviceError
76	lossOfSynchronisation
77	lossOfRedundancy
78	powerSupplyFailure
79	signalQualityEvaluationFailure
80	tranceiverFailure
81	protectionMechanismFailure
82	protectingResourceFailure
101	airCompressorFailure
102	airConditioningFailure
103	airDryerFailure
104	batteryDischarging
105	batteryFailure
106	commercialPowerFailure
107	coolingFanFailure
108	engineFailure
109	fireDetectorFailure
110	fuseFailure
111	generatorFailure
112	lowBatteryThreshold
113	pumpFailure
114	rectifierFailure
115	rectifierHighVoltage
116	rectifierLowFVoltage
117	ventilationsSystemFailure
118	enclosureDoorOpen
119	explosiveGas
120	fire
121	flood
122	highHumidity
123	highTemperature
124	highWind
125	iceBuildUp
126	intrusionDetection
127	lowFuel
128	lowHumidity
129	lowCablePressure
130	lowTemperatue
131	lowWater
132	smoke
133	toxicGas
134	coolingSystemFailure
135	externalEquipmentFailure
136	externalPointFailure
151	storageCapacityProblem
152	memoryMismatch
153	corruptData
154	outOfCPUCycles
155	sfwrEnvironmentProblem
156	sfwrDownloadFailure
157	lossOfRealTimel
158	applicationSubsystemFailure
159	configurationOrCustomisationError
160	databaseInconsistency
161	fileError
162	outOfMemory
163	softwareError
164	timeoutExpired
165	underlayingResourceUnavailable
166	versionMismatch
201	bandwidthReduced
202	congestion
203	excessiveErrorRate
204	excessiveResponseTime
205	excessiveRetransmissionRate
206	reducedLoggingCapability
207	systemResourcesOverload
500	adapterError
501	applicationSubsystemFailture
502	bandwidthReducedX733
503	callEstablishmentError
504	communicationsProtocolError
505	communicationsSubsystemFailure
506	configurationOrCustomizationError
507	congestionX733
508	coruptData
509	cpuCyclesLimitExceeded
510	dataSetOrModemError
511	degradedSignalX733
512	dteDceInterfaceError
513	enclosureDoorOpenX733
514	equipmentMalfunction
515	excessiveVibration
516	fileErrorX733
517	fireDetected
518	framingErrorX733
519	heatingVentCoolingSystemProblem
520	humidityUnacceptable
521	inputOutputDeviceError
522	inputDeviceError
523	lanError
524	leakDetected
525	localNodeTransmissionErrorX733
526	lossOfFrameX733
527	lossOfSignalX733
528	materialSupplyExhausted
529	multiplexerProblemX733
530	outOfMemoryX733
531	ouputDeviceError
532	performanceDegraded
533	powerProblems
534	pressureUnacceptable
535	processorProblems
536	pumpFailureX733
537	queueSizeExceeded
538	receiveFailureX733
539	receiverFailureX733
540	remoteNodeTransmissionErrorX733
541	resourceAtOrNearingCapacity
542	responseTimeExecessive
543	retransmissionRateExcessive
544	softwareErrorX733
545	softwareProgramAbnormallyTerminated
546	softwareProgramError
547	storageCapacityProblemX733
548	temperatureUnacceptable
549	thresholdCrossed
550	timingProblemX733
551	toxicLeakDetected
552	transmitFailureX733
553	transmiterFailure
554	underlyingResourceUnavailable
555	versionMismatchX733
600	authenticationFailure
601	breachOfConfidentiality
602	cableTamper
603	delayedInformation
604	denialOfService
605	duplicateInformation
606	informationMissing
607	informationModificationDetected
608	informationOutOfSequence
609	keyExpired
610	nonRepudiationFailure
611	outOfHoursActivity
612	outOfService
613	proceduralError
614	unauthorizedAccessAttempt
615	unexpectedInformation
1024	other

.1.3.6.1.4.1.119.2.3.69.5.3.3.1.1.9

ipeCfgAuxOutTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.3.2 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgAuxOutTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgAuxOutTable'

AUX Output Table

ipeCfgAuxOutEntry row .1.3.6.1.4.1.119.2.3.69.5.3.3.2.1

Indexes

ipeCfgAuxOutIndex

Column	Syntax	OID
ipeCfgAuxOutIndex Index of this table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.5.3.3.2.1.1`
ipeCfgAuxOutNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.3.3.2.1.2`
ipeCfgAuxOutItemName Item Name	OctetStringr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.119.2.3.69.5.3.3.2.1.3`
ipeCfgAuxOutOpenState Status Strings (Event Off (Open))	OctetStringr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.119.2.3.69.5.3.3.2.1.4`
ipeCfgAuxOutCloseState Status Strings (Event On (Close))	OctetStringr/w Constraints: `range: 0-32`	`.1.3.6.1.4.1.119.2.3.69.5.3.3.2.1.5`

ipeCfgNtpServiceTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.4.1 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgNtpServiceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgNtpServiceTable'

Table of NTP configuration information.

ipeCfgNtpServiceEntry row .1.3.6.1.4.1.119.2.3.69.5.3.4.1.1

Entry of NTP configuration information.

Indexes

ipeCfgNtpServiceIndex

Column Syntax OID

ipeCfgNtpServiceIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.1

reserved.

ipeCfgNtpServerMulticastPort

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.2

ipeCfgNtpServiceEnable

NTP control enable.

Enumerationr/w

Enumerated Values:

0	invalid
1	disabled
2	enabled

.1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.3

ipeCfgNtpServerMode

NTP server mode.

Enumerationr/w

Enumerated Values:

0	invalid
1	unicast
2	multicast
3	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.4

ipeCfgNtpClientMode

NTP client mode.

Enumerationr/w

Enumerated Values:

0	invalid
1	unicast
2	multicast
3	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.5

ipeCfgNtpServerStratum

NTP Stratum.

Integer32r/w

Constraints:
range: 2-15

.1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.6

NTP server multicast port.

ipeCfgNtpServerMulticastIntervalTime

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.7

Value of NTP multicast polling time.

Integer32r/w

Constraints:
range: 4-17

.1.3.6.1.4.1.119.2.3.69.5.3.4.1.1.8

ipeCfgNtpServerTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.4.2 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgNtpServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgNtpServerTable'

Table of NTP server information.

ipeCfgNtpServerEntry row .1.3.6.1.4.1.119.2.3.69.5.3.4.2.1

Entry of NTP server information.

Indexes

ipeCfgNtpServerIndex

Column	Syntax	OID
ipeCfgNtpServerIndex Index of this table.	Integer32 Constraints: `range: 1-4`	`.1.3.6.1.4.1.119.2.3.69.5.3.4.2.1.1`
ipeCfgNtpServerNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.3.4.2.1.2`
ipeCfgNtpServerAddress IP Address of NTP server.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.3.4.2.1.3`
ipeCfgNtpVersion Version of supported NTP message.	Integer32r/w Constraints: `range: 3-4`	`.1.3.6.1.4.1.119.2.3.69.5.3.4.2.1.4`
ipeCfgNtpPollTime NTP Polling Time, in seconds as a power of two. For instance, a value of six indicates a interval of 64 seconds. Note) The value less than 6 is rejected by the agent because of the system recommendation. …	Integer32r/w Constraints: `range: 4-17`	`.1.3.6.1.4.1.119.2.3.69.5.3.4.2.1.5`

ipeCfgFtpServerTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.7.1 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgFtpServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgFtpServerTable'

Table of FTP server configuration information.

ipeCfgFtpServerEntry row .1.3.6.1.4.1.119.2.3.69.5.3.7.1.1

Entry of FTP server configuration information.

Indexes

ipeCfgFtpServerIndex

Column Syntax OID

ipeCfgFtpServerIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.3.7.1.1.1

ipeCfgFtpServerNEAddress

reserved.

ipeCfgFtpServerCommandTcpPort

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.7.1.1.2

ipeCfgFtpServerEnable

FTP control enable.

Enumerationr/w

Enumerated Values:

0	invalid
1	serviceDisable
2	serviceEnable
3	alwaysEnable

.1.3.6.1.4.1.119.2.3.69.5.3.7.1.1.3

Port number of FTP command.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.119.2.3.69.5.3.7.1.1.4

ipeCfgFtpServerDataTcpPort

Port number of FTP data transfer.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.119.2.3.69.5.3.7.1.1.5

ipeCfgFtpServerMaxSession

Number of max connections.

Integer32r/w

Constraints:
range: 1-3

.1.3.6.1.4.1.119.2.3.69.5.3.7.1.1.6

ipeCfgFtpServerAutoDisable

FTP automatic stop control enable.

Enumerationr/w

Enumerated Values:

0	invalid
1	disabled
2	enabled

.1.3.6.1.4.1.119.2.3.69.5.3.7.1.1.7

ipeCfgSftpServerTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.8.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgSftpServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgSftpServerTable'

Table of SFTP server configuration information.

ipeCfgSftpServerEntry row .1.3.6.1.4.1.119.2.3.69.5.3.8.1.1

Entry of SFTP server configuration information.

Indexes

ipeCfgSftpServerIndex

Column Syntax OID

ipeCfgSftpServerIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.3.8.1.1.1

ipeCfgSftpServerNEAddress

reserved.

ipeCfgSftpServerAutoDisable

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.8.1.1.2

ipeCfgSftpServerEnable

SFTP control enable.

Enumerationr/w

Enumerated Values:

0	invalid
1	serviceDisable
2	serviceEnable
3	alwaysEnable

.1.3.6.1.4.1.119.2.3.69.5.3.8.1.1.3

SFTP automatic stop control enable.

Enumerationr/w

Enumerated Values:

0	invalid
1	disabled
2	enabled

.1.3.6.1.4.1.119.2.3.69.5.3.8.1.1.4

ipeCfgHttpServerTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.9.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgHttpServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgHttpServerTable'

Table of HTTP configuration information.

ipeCfgHttpServerEntry row .1.3.6.1.4.1.119.2.3.69.5.3.9.1.1

Entry of HTTP configuration information.

Indexes

ipeCfgHttpServerIndex

Column Syntax OID

ipeCfgHttpServerIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.3.9.1.1.1

ipeCfgHttpServerNEAddress

reserved.

ipeCfgHttpsServerNEAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.9.1.1.2

ipeCfgHttpServerEnable

HTTP control enable.

Enumerationr/w

Enumerated Values:

0	invalid
1	disabled
2	enabled

.1.3.6.1.4.1.119.2.3.69.5.3.9.1.1.3

ipeCfgHttpServerTcpPort

Port number of HTTP.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.119.2.3.69.5.3.9.1.1.4

ipeCfgHttpsServerTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.10.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgHttpsServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgHttpsServerTable'

Table of HTTPS configuration information.

ipeCfgHttpsServerEntry row .1.3.6.1.4.1.119.2.3.69.5.3.10.1.1

Entry of HTTPS configuration information.

Indexes

ipeCfgHttpsServerIndex

Column Syntax OID

ipeCfgHttpsServerIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.3.10.1.1.1

reserved.

ipeCfgSnmpServerNEAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.10.1.1.2

ipeCfgHttpsServerEnable

HTTPS control enable.

Enumerationr/w

Enumerated Values:

0	invalid
1	disabled
2	enabled

.1.3.6.1.4.1.119.2.3.69.5.3.10.1.1.3

ipeCfgHttpsServerTcpPort

TCP port number of HTTPS.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.119.2.3.69.5.3.10.1.1.4

ipeCfgSnmpServerTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.11.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgSnmpServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgSnmpServerTable'

A table of SNMP configuration information.

ipeCfgSnmpServerEntry row .1.3.6.1.4.1.119.2.3.69.5.3.11.1.1

A set of SNMP configuration information.

Indexes

ipeCfgSnmpServerIndex

Column Syntax OID

ipeCfgSnmpServerIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.3.11.1.1.1

reserved.

ipeCfgSnmpCommunityNEAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.11.1.1.2

ipeCfgSnmpV1V2cEnable

Indicates the SNMP entity is permitted to receive & process
SNMPv1/v2c PDU or is not permitted to do.

Even if it is disabled, SNMPv1/v2c Traps is sent.

Enumerationr/w

Enumerated Values:

0	invalid
1	disabled
2	enabled

.1.3.6.1.4.1.119.2.3.69.5.3.11.1.1.3

ipeCfgSnmpV3Enable

Indicates the SNMP entity is permitted to receive & process
SNMPv3 PDU or is not permitted to do.

Even if it is disabled, SNMPv3 Traps is sent.

Enumerationr/w

Enumerated Values:

0	invalid
1	disabled
2	enabled

.1.3.6.1.4.1.119.2.3.69.5.3.11.1.1.4

ipeCfgSnmpServerPort

A UDP port number to receive all SNMP Request-PDU.
The reboot of the system is necessary to reflect setting.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.119.2.3.69.5.3.11.1.1.5

ipeCfgSnmpCommunityTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.11.2 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgSnmpCommunityTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgSnmpCommunityTable'

A table of SNMP community information.

ipeCfgSnmpCommunityEntry row .1.3.6.1.4.1.119.2.3.69.5.3.11.2.1

A set of SNMP community information.

Indexes

ipeCfgSnmpCommunityIndex

Column Syntax OID

ipeCfgSnmpCommunityIndex

Index of this table.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.119.2.3.69.5.3.11.2.1.1

reserved.

ipeCfgSnmpCommunityAccessLevel

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.11.2.1.2

ipeCfgSnmpCommunityName

This entity's community name.

Please use ASCII code.

The characters which can be used are '-', '_','0'-'9', 'a'-'z'
and 'A'-'Z'.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.119.2.3.69.5.3.11.2.1.3

A access level of a connection using this entry's community
name.

Enumerationr/w

Enumerated Values:

0	invalid
1	operatorLevel
2	configLevel
3	adminLevel

.1.3.6.1.4.1.119.2.3.69.5.3.11.2.1.4

ipeCfgSnmpCommunityAccessAddress

An address which is permitted to use this entry's community
name.
When masking in ipeCfgSnmpCommunityAccessPrefixLength, the host
address part has to be a zero, if any.

Also the following address can't be…

ipeCfgSnmpCommunityAccessPrefixLength

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.11.2.1.5

A prefix length of ipeCfgSnmpCommunityAccessAddress.

Integer32r/w

Constraints:
range: 0-32

.1.3.6.1.4.1.119.2.3.69.5.3.11.2.1.6

ipeCfgSnmpCommunityRowStatus

This RowStatus has a status only active(1).
You can SET only createAndGo(4) or Destroy(6).

1) how to create
To create a new row, you must SET objects indicated below.

ipeCfgSnmpCommunityNa…

Enumerationr/w

Enumerated Values:

1	active
4	createAndGo
6	destroy

.1.3.6.1.4.1.119.2.3.69.5.3.11.2.1.7

ipeCfgSnmpTrapTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.11.3 · 1 row entry · 14 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgSnmpTrapTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgSnmpTrapTable'

A table of notification information.

ipeCfgSnmpTrapEntry row .1.3.6.1.4.1.119.2.3.69.5.3.11.3.1

A set of notification information.

Indexes

ipeCfgSnmpTrapEntryIndex

Column Syntax OID

ipeCfgSnmpTrapEntryIndex

Index of this table.

Integer32

Constraints:
range: 1-6

.1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.1

ipeCfgSnmpTrapEntryNEAddress

reserved.

ipeCfgSnmpTrapTargetAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.2

ipeCfgSnmpTrapVersion

A version of this entry's notification.

Enumerationr/w

Enumerated Values:

0	invalid
1	v1
2	v2c
3	v3

.1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.3

ipeCfgSnmpTrapNotifyType

A notification type of this entry's notification.

Enumerationr/w

Enumerated Values:

0	invalid
1	trap
2	inform

.1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.4

Destination IP address of this entry's notification.

The following address can't be used.
127.0.0.0/8 Loopback
0.0.0.0/0 Current network
224.0.0.0/4 Multicasts (former Class D)
240.0.0.0/4 Reserved (fo…

ipeCfgSnmpTrapSecurityName

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.5

ipeCfgSnmpTrapTargetPort

Destination UDP port this entry's notification.

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.6

A security name.
The meaning is different depending on ipeCfgSnmpTrapVersion.

v1/v2c : It's meaning a community name.
v3 : It's meaning a user name.

Please use ASCII code.
…

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.7

ipeCfgSnmpTrapSecurityLevel

A security level of this entry's notification.

When ipeCfgSnmpTrapVersion is v1(1) or v2c(2), you have to SET
noAuthNoPriv(1).

Enumerationr/w

Enumerated Values:

0	invalid
1	noAuthNoPriv
2	authNoPriv
3	authPriv

.1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.8

ipeCfgSnmpTrapEngineId

A snmpEngineID which this entry's notification uses.(5-32 octet)
ipeCfgSnmpTrapNotifyType is effective only at the time of
inform(2).
A snmpEngineID of a destination SNMP entity.

When there was the same c…

OctetStringr/w

Constraints:
range: 5-32

.1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.9

ipeCfgSnmpTrapAuthAlgorithm

Authentication protocol.

ipeCfgSnmpTrapNotifyType is effective for the SET only at the
time of inform(2). Even if it is done SET in the case of trap(1),
I am ignored. In addition, a value of
ipeCfgAccount…

Enumerationr/w

Enumerated Values:

0	invalid
1	md5
2	sha

.1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.10

ipeCfgSnmpTrapAuthKey

Authenticate password for SNMP inform PDU.
This object expects encrypted password by blowfish, not original
password. Therefore, the size of this object is not same as
original password size (8..31).

When…

OctetStringr/w

Constraints:
range: 8-128

.1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.11

ipeCfgSnmpTrapPrivAlgorithm

privacy protocol.

ipeCfgSnmpTrapNotifyType is effective for the SET only at the
time of inform(2). Even if it is done SET in the case of trap(1),
I am ignored. In addition, a value of
ipeCfgAccountUserSnm…

Enumerationr/w

Enumerated Values:

0	invalid
1	des
2	aes

.1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.12

ipeCfgSnmpTrapPrivKey

Privacy password for SNMP inform PDU.
This object expects encrypted password by blowfish, not original
password. Therefore, the size of this object is not same as
orignal password size (8..31).

When the o…

OctetStringr/w

Constraints:
range: 8-128

.1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.13

ipeCfgSnmpTrapRowStatus

This RowStatus has a status only active(1).
You can SET only createAndGo(4) or destroy(6).

1) how to create
1.1) SNMPv1/v2c
To create a new row, you must SET objects indicated below.

ipeCf…

Enumerationr/w

Enumerated Values:

1	active
4	createAndGo
6	destroy

.1.3.6.1.4.1.119.2.3.69.5.3.11.3.1.14

ipeCfgAccountUserInfoTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.12.1 · 1 row entry · 11 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgAccountUserInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgAccountUserInfoTable'

Table of user Information.

ipeCfgAccountUserInfoEntry row .1.3.6.1.4.1.119.2.3.69.5.3.12.1.1

Entry of user information.

Indexes

ipeCfgAccountUserIndex

Column Syntax OID

ipeCfgAccountUserIndex

Index of this table.

Integer32

Constraints:
range: 1-102

.1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.1

ipeCfgAccountUserNEAddress

reserved.

ipeCfgAccountUserSnmpV3SecurityLevel

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.2

ipeCfgAccountUserName

User Name.
An overlap of a user name isn't permitted.

Please use ASCII code.

The characters which can be used are '-', '_','0'-'9', 'a'-'z'
and 'A'-'Z'.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.3

ipeCfgAccountUserKey

User password encrypted by blowfish.
Acceptable characters for this object is shown below.

'-', '_','0'-'9', 'a'-'z' and 'A'-'Z'.

OctetStringr/w

Constraints:
range: 8-128

.1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.4

ipeCfgAccountUserGroup

This object defines the privilege for the user.
Acceptable characters for this object is shown below.

'-', '_','0'-'9', 'a'-'z' and 'A'-'Z'.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.5

SNMPv3 security level.

Setting for SET/GET/TRAP at the time of the SNMPv3 use(INFORM is
inapplicable)

Enumerationr/w

Enumerated Values:

0	invalid
1	noAuthNoPriv
2	authNoPriv
3	authPriv

.1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.6

ipeCfgAccountUserSnmpV3AuthAlgorithm

Hash calculate algorithm of authenticate password.

Setting for SET/GET/TRAP at the time of the SNMPv3 use(INFORM is
inapplicable)

Enumerationr/w

Enumerated Values:

0	invalid
1	md5
2	sha

.1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.7

ipeCfgAccountUserSnmpV3AuthKey

Authenticate password for SNMP SET/GET/TRAP PDU.
This object expects encrypted password by blowfish, not original
password. Therefore, the size of this object is not same as
orignal password (8..31).

When…

OctetStringr/w

Constraints:
range: 8-128

.1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.8

ipeCfgAccountUserSnmpV3PrivAlgorithm

Cipher algorithm.

Setting for SET/GET/TRAP at the time of the SNMPv3 use(INFORM is
inapplicable)

Enumerationr/w

Enumerated Values:

0	invalid
1	des
2	aes

.1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.9

ipeCfgAccountUserSnmpV3PrivKey

Privacy password for SNMP SET/GET/TRAP PDU.
This object expects encrypted password by blowfish, not original
password. Therefore, the size of this object is not same as
orignal password (8..31).

When the …

OctetStringr/w

Constraints:
range: 8-128

.1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.10

ipeCfgAccountUserRowStatus

This RowStatus has a status only active(1).

1) creating a entry
When you make a new entry, you must SET objects indicated below.

ipeCfgAccountUserIndex
ipeCfgAccountUserName
ipeCfgAccountU…

Enumerationr/w

Enumerated Values:

1	active
4	createAndGo
6	destroy

.1.3.6.1.4.1.119.2.3.69.5.3.12.1.1.11

ipeCfgAccountGroupInfoTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.12.2 · 1 row entry · 12 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgAccountGroupInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgAccountGroupInfoTable'

Table of Group Information.

ipeCfgAccountGroupInfoEntry row .1.3.6.1.4.1.119.2.3.69.5.3.12.2.1

Entry of Group Information.

Indexes

ipeCfgAccountGroupIndex

Column Syntax OID

ipeCfgAccountGroupIndex

Index of this table.

Integer32

Constraints:
range: 1-10

.1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.1

ipeCfgAccountGroupNEAddress

reserved.

ipeCfgAccountGroupAccessLevel

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.2

ipeCfgAccountGroupName

Group name.
An overlap of a group name isn't permitted.

Please use ASCII code.

The characters which can be used are '-', '_','0'-'9', 'a'-'z'
and 'A'-'Z'.

OctetStringr/w

Constraints:
range: 1-31

.1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.3

ipeCfgAccountGroupTelnet

TELNET enable.

Enumerationr/w

Enumerated Values:

0	invalid
1	disabled
2	enabled

.1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.4

ipeCfgAccountGroupSsh

SSH enable.

Enumerationr/w

Enumerated Values:

0	invalid
1	disabled
2	enabled

.1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.5

ipeCfgAccountGroupFtp

FTP enable.

Enumerationr/w

Enumerated Values:

0	invalid
1	disabled
2	enabled

.1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.6

ipeCfgAccountGroupSftp

SFTP enable.

Enumerationr/w

Enumerated Values:

0	invalid
1	disabled
2	enabled

.1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.7

ipeCfgAccountGroupHttp

HTTP enable.

Enumerationr/w

Enumerated Values:

0	invalid
1	disabled
2	enabled

.1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.8

ipeCfgAccountGroupHttps

HTTPS enable.

Enumerationr/w

Enumerated Values:

0	invalid
1	disabled
2	enabled

.1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.9

ipeCfgAccountGroupSnmp

SNMP enable.

Enumerationr/w

Enumerated Values:

0	invalid
1	disabled
2	enabled

.1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.10

Access level.

Enumerationr/w

Enumerated Values:

0	invalid
1	operatorLevel
2	configLevel
3	adminLevel

.1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.11

ipeCfgAccountGroupRowStatus

This RowStatus has a status only 'active(1)'.

1) creating a entry.
When you make a new entry, you must SET objects indicated below.

ipeCfgAccountGroupName
ipeCfgAccountGroupTelnet
ipeCfgAc…

Enumerationr/w

Enumerated Values:

1	active
4	createAndGo
6	destroy

.1.3.6.1.4.1.119.2.3.69.5.3.12.2.1.12

ipeCfgUserAccountAuthTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.12.4 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgUserAccountAuthTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgUserAccountAuthTable'

Configure user authentication method about Web LCT.

ipeCfgUserAccountAuthEntry row .1.3.6.1.4.1.119.2.3.69.5.3.12.4.1

...

Indexes

ipeCfgUserAccountAuthIndex

Column Syntax OID

ipeCfgUserAccountAuthIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.3.12.4.1.1

ipeCfgUserAccountAuthNEAddress

Reserved object for northbound interface.

ipeCfgUserAccountAuthMode

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.12.4.1.2

Indicate the user authentication mode.

mode1 : local authentication only.
mode2 : local and LDAP authentication. (NOT SUPPORTED)
mode3 : local and RADIUS authentication.

mode2 will be supp…

Enumerationr/w

Enumerated Values:

0	invalid
1	mode1
2	mode2
3	mode3

.1.3.6.1.4.1.119.2.3.69.5.3.12.4.1.3

ipeCfgUserAccountAuthOrder

Indicate the user authentication order.
This object is effective only if ipeCfgUserAccountAuthMode
is set to mode2 or mode3.
External authentication means authentication with RADIUS or
LDAP.

localAuthFirs…

Enumerationr/w

Enumerated Values:

0	invalid
1	localAuthFirst
2	externalAuthFirst

.1.3.6.1.4.1.119.2.3.69.5.3.12.4.1.4

ipeCfgUserAccountAuthTrapEnable

Enable or disable user login trap.
In case this object is set to enable, the system sends trap
when user attempt to login to Web LCT.

Enumerationr/w

Enumerated Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.5.3.12.4.1.5

ipeCfgUserAccountAuthTrapLocal

Indicate authentication result of local authentication.
This object is dedicated for login control trap.
If you read this object, the system returns invalid(0).

Enumeration

Enumerated Values:

0	invalid
1	success
2	failure

.1.3.6.1.4.1.119.2.3.69.5.3.12.4.1.6

ipeCfgUserAccountAuthTrapExternal

Indicate authentication result of externel authentication.
This object is dedicated for login control trap.
If you read this object, the system returns invalid(0).

Enumeration

Enumerated Values:

0	invalid
1	success
2	failure

.1.3.6.1.4.1.119.2.3.69.5.3.12.4.1.7

ipeCfgDhcpServerTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.13.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgDhcpServerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgDhcpServerTable'

DHCPserver table.

ipeCfgDhcpServerEntry row .1.3.6.1.4.1.119.2.3.69.5.3.13.1.1

entry of DHCPserver table.

Indexes

ipeCfgDhcpServerIndex

Column Syntax OID

ipeCfgDhcpServerIndex

Index of this table.

Integer32

Constraints:
range: 1-2

.1.3.6.1.4.1.119.2.3.69.5.3.13.1.1.1

ipeCfgDhcpServerNEAddress

reserved.

ipeCfgDhcpLeaseAddrRangeBegin

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.13.1.1.2

ipeCfgDhcpServerEnable

Effective/invalid setting of DHCP.
value range:start(1)
stop(2)
restart(3)
DHCPD has already started. When the start is specified, DHCPD
restart.

Enumerationr/w

Enumerated Values:

1	start
2	stop
3	restart

.1.3.6.1.4.1.119.2.3.69.5.3.13.1.1.3

Beginning IPaddress within the range of lease address.
value range:Dotted decimal notation
denial value:0.0.0.0 , 127.0.0.1 , 255.255.255.255
ipeCfgDhcpLeaseAddrRangeBegin don't same as
ipeCfgPortLctIpAddress value

ipeCfgDhcpLeaseAddrRangeEnd

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.13.1.1.4

End IPaddress within the range of lease address.
value range:Dotted decimal notation
denial value:0.0.0.0 , 127.0.0.1 , 255.255.255.255
ipeCfgDhcpLeaseAddrRangeEnd don't same as ipeCfgPortLctIpAddress
value

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.13.1.1.5

ipeCfgStpBridgeTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.14.1 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgStpBridgeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgStpBridgeTable'

STP state setting table.

ipeCfgStpBridgeEntry row .1.3.6.1.4.1.119.2.3.69.5.3.14.1.1

entry of STP state setting table.

Indexes

ipeCfgStpBridgeIndex

Column Syntax OID

ipeCfgStpBridgeIndex

Index of this table.

Integer32

Constraints:
range: 1-20

.1.3.6.1.4.1.119.2.3.69.5.3.14.1.1.1

ipeCfgStpBridgeNEAddress

reserved.

ipeCfgStpBridgeForwardDelay

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.14.1.1.2

ipeCfgStpEnable

Effective/invalid setting of STP.
value :enabled
disabled

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.14.1.1.3

ipeCfgStpPriority

Bridge priority.
value range:0 to 65535

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.119.2.3.69.5.3.14.1.1.4

ipeCfgStpBridgeMaxAge

MaxAge (in units of hundredths of a second).
value range:600 to 4000
rule: 2 * (ipeCfgStpBridgeForwardDelay - 1) =>
ipeCfgStpBridgeMaxAge
ipeCfgStpBridgeMaxAge >= 2 * (ipeCfgStpBridgeHelloTime + 1)

Integer32r/w

Constraints:
range: 600-4000

.1.3.6.1.4.1.119.2.3.69.5.3.14.1.1.5

ipeCfgStpBridgeHelloTime

HelloTime (in units of hundredths of a second).
value range:100 to 1000
rule:ipeCfgStpBridgeMaxAge >= 2x(ipeCfgStpBridgeHelloTime + 1)

Integer32r/w

Constraints:
range: 100-1000

.1.3.6.1.4.1.119.2.3.69.5.3.14.1.1.6

ForwardDelay (in units of hundredths of a second).
value range:400 to 3000
rule: 2 * (ipeCfgStpBridgeForwardDelay - 1) >=
ipeCfgStpBridgeMaxAge

Integer32r/w

Constraints:
range: 400-3000

.1.3.6.1.4.1.119.2.3.69.5.3.14.1.1.7

ipeCfgStpPortTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.14.2 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgStpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgStpPortTable'

STP port information table.

ipeCfgStpPortEntry row .1.3.6.1.4.1.119.2.3.69.5.3.14.2.1

entry of STP port information table.

Indexes

ipeCfgStpPortIfIndex

Column Syntax OID

ipeCfgStpPortIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …

.1.3.6.1.4.1.119.2.3.69.5.3.14.2.1.1

ipeCfgStpPortNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.14.2.1.2

ipeCfgStpPortPriority

Port priority.
value range:0 to 63

Integer32r/w

Constraints:
range: 0-63

.1.3.6.1.4.1.119.2.3.69.5.3.14.2.1.3

ipeCfgStpPortPathCost

Pathcost.
value range:1 to 65535

Integer32r/w

Constraints:
range: 1-65535

.1.3.6.1.4.1.119.2.3.69.5.3.14.2.1.4

ipeCfgStpPortEdgeEnable

Effective/invalid setting of BPDU.
value range:enabled(1)
disabled(2)

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.14.2.1.5

ipeCfgPortModemTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.15.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgPortModemTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgPortModemTable'

MODEM port set up information table.

ipeCfgPortModemEntry row .1.3.6.1.4.1.119.2.3.69.5.3.15.1.1

entry of MODEM port set up information table.

Indexes

ipeCfgPortModemIfIndex

Column Syntax OID

ipeCfgPortModemIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.5.3.15.1.1.1

ipeCfgPortModemNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.15.1.1.2

ipeCfgPortModemEnable

Effective/invalid setting of MODEM port.
value range: enabled(1)
disabled(2)

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.15.1.1.3

ipeCfgPortLctTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.15.2 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgPortLctTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgPortLctTable'

LCT port set up information table.

ipeCfgPortLctEntry row .1.3.6.1.4.1.119.2.3.69.5.3.15.2.1

entry of LCT port set up information table.

Indexes

ipeCfgPortLctIfIndex

Column Syntax OID

ipeCfgPortLctIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.5.3.15.2.1.1

ipeCfgPortLctNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.15.2.1.2

ipeCfgPortLctIpAddress

IPaddress of LCT port.
It makes an error of the Internet Protocol address setting that
overlaps in the port in the device.
The object port and the range of the value are described as
follows.
Object port: Lct, InbandMng…

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.15.2.1.3

ipeCfgPortLctNetMask

Subnet mask of LCT port.
When it isn't proper as subnetmask, it'll be an error.
Value range:0x00000000-0xfffffffc(0-30bit)

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.15.2.1.4

ipeCfgPortLctEnable

Effective/invalid setting of LCT port.
value range: enabled
disabled

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.15.2.1.5

ipeCfgPortLctMtu

MTU value of LCT.
value range:256 to 1500

Integer32r/w

Constraints:
range: 256-1500

.1.3.6.1.4.1.119.2.3.69.5.3.15.2.1.6

ipeCfgPortLctAutoNeg

Effective/invalid setting of LCT AUTO NEGOTIATION.
value range: enabled
disabled

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.15.2.1.7

ipeCfgPortEtherTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.15.3 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgPortEtherTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgPortEtherTable'

NMS/NE1 port set up information table.

ipeCfgPortEtherEntry row .1.3.6.1.4.1.119.2.3.69.5.3.15.3.1

entry of NMS/NE1 port set up information table.

Indexes

ipeCfgPortEtherIfIndex

Column Syntax OID

ipeCfgPortEtherIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.5.3.15.3.1.1

ipeCfgPortEtherNEAddress

reserved.

ipeCfgPortEtherSpecialFilter

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.15.3.1.2

ipeCfgPortEtherEnable

Effective/invalid setting of NMS/NE1 port.
value range: enabled(1)
disabled(2)

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.15.3.1.3

ipeCfgPortEtherAutoNeg

Auto negotiation invalid effective/setting of NMS/NE1 port.
value range: enabled(1)
disabled(2)

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.15.3.1.4

Setting of whether a special broadcast packet is blocked.

Enumerationr/w

Enumerated Values:

1	true
2	false

.1.3.6.1.4.1.119.2.3.69.5.3.15.3.1.5

ipeCfgPortEtherLldpMode

Switch to select MAC address of LLDP Frame.

standardMode : MAC address of LLDP Frame is
01-80-C2-00-00-0E.
proprietaryMode : MAC address of LLDP Frame is configured in
…

Enumerationr/w

Enumerated Values:

0	invalid
1	standardMode
2	proprietaryMode

.1.3.6.1.4.1.119.2.3.69.5.3.15.3.1.6

ipeCfgPortNe2Table

table

.1.3.6.1.4.1.119.2.3.69.5.3.15.4 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgPortNe2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgPortNe2Table'

NE2 port set up information table.

ipeCfgPortNe2Entry row .1.3.6.1.4.1.119.2.3.69.5.3.15.4.1

entry of NE2 port set up information table.

Indexes

ipeCfgPortNe2IfIndex

Column Syntax OID

ipeCfgPortNe2IfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.5.3.15.4.1.1

ipeCfgPortNe2NEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.15.4.1.2

ipeCfgPortNe2IpAddress

NE2 port IP Address.
value range:0x00000000 - 0xdfffffff(0.0.0.0 - 223.255.255.255)
The ppp function is restarted when setting it.

ipeCfgPortNe2NeighborMibEnable

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.15.4.1.3

ipeCfgPortNe2Enable

NE2 port enable.
value range:enabled(1)
disabled(2)

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.15.4.1.4

ipeCfgPortNe2Speed

NE2 port baud rate.
value range:9600bps(9600)
19200bps(19200)
The ppp function is restarted when setting it.

Enumerationr/w

Enumerated Values:

9600	speed9600
19200	speed19200

.1.3.6.1.4.1.119.2.3.69.5.3.15.4.1.5

NE2 port neighbor detection enable.
value range:enabled(1)
disabled(2)
The ppp function is restarted when setting it.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.15.4.1.6

ipeCfgPortE1Table

table

.1.3.6.1.4.1.119.2.3.69.5.3.15.5 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgPortE1Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgPortE1Table'

E1 port set up information table.

ipeCfgPortE1Entry row .1.3.6.1.4.1.119.2.3.69.5.3.15.5.1

entry of E1 port set up information table.

Indexes

ipeCfgPortE1IfIndex

Column Syntax OID

ipeCfgPortE1IfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.5.3.15.5.1.1

ipeCfgPortE1NEAddress

reserved.

ipeCfgPortE1ChannelNumber

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.15.5.1.2

ipeCfgPortE1Enable

Effective/invalid setting of E1 port.
value range: enabled(1)
disabled(2)

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.15.5.1.3

Use channel of E1 port.
value range:1 to 16

Integer32r/w

Constraints:
range: 1-16

.1.3.6.1.4.1.119.2.3.69.5.3.15.5.1.4

ipeCfgPortInbandTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.15.6 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgPortInbandTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgPortInbandTable'

InBand Management VLAN port set up information table.

ipeCfgPortInbandEntry row .1.3.6.1.4.1.119.2.3.69.5.3.15.6.1

entry of INBAND Management VLAN port set up information table.

Indexes

ipeCfgPortInbandIfIndex

Column Syntax OID

ipeCfgPortInbandIfIndex

Index of this table.

ipeCfgPortInbandNEAddress

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.1

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.2

ipeCfgPortInbandIpAddressobsolete

IPaddress of INBAND Management VLAN port.
It makes an error of the Internet Protocol address setting that
overlaps in the port in the device.
The object port and the range of the value are described as
follows.
Object p…

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.3

ipeCfgPortInbandNetMaskobsolete

Subnet mask of INBAND Management VLAN port.
When it isn't proper as subnetmask, it'll be an error.
Value range:0x00000000 - 0xfffffffc(0 - 30bit)

ipeCfgPortMainEtherIfIndex

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.4

ipeCfgPortInbandEnable

Effective/invalid setting of INBAND Management VLAN port.
value range: enabled(1)
disabled(2)

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.5

ipeCfgPortInbandVlanId

VLAN ID of INBAND Management VLAN port.
value range:1 to 4094

Integer32r/w

Constraints:
range: 1-4094

.1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.6

ipeCfgPortInbandMtuobsolete

MTU value of INBAND Management VLAN port.
value range:256 to 1500

Integer32r/w

Constraints:
range: 256-1500

.1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.7

ipeCfgPortInbandCos

CoS value of INBAND Management VLAN port

Integer32r/w

Constraints:
range: 0-7

.1.3.6.1.4.1.119.2.3.69.5.3.15.6.1.8

ipeCfgPortMainEtherTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.15.7 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgPortMainEtherTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgPortMainEtherTable'

Main traffic ether port set up information table.

ipeCfgPortMainEtherEntry row .1.3.6.1.4.1.119.2.3.69.5.3.15.7.1

entry of main traffic ether port set up information table.

Indexes

Column Syntax OID

ipeCfgPortMainEtherIfIndex

Index of this table.

ipeCfgPortMainEtherNEAddress

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.5.3.15.7.1.1

reserved.

ipeCfgPortMainEtherLldpMode

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.15.7.1.2

Switch to select MAC address of LLDP Frame.

standardMode : MAC address of LLDP Frame is 01-80-C2-00-00-0E.
proprietaryMode : MAC address of LLDP Frame is configured in
ipeCfgLldpProp…

Enumerationr/w

Enumerated Values:

0	invalid
1	standardMode
2	proprietaryMode

.1.3.6.1.4.1.119.2.3.69.5.3.15.7.1.3

ipeCfgBridgeTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.16.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgBridgeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgBridgeTable'

Bridge set up information table.

ipeCfgBridgeEntry row .1.3.6.1.4.1.119.2.3.69.5.3.16.1.1

entry of Bridge set up information table.

Indexes

ipeCfgBridgeIndex

Column	Syntax	OID
ipeCfgBridgeIndex Index of this table.	Integer32 Constraints: `range: 1-20`	`.1.3.6.1.4.1.119.2.3.69.5.3.16.1.1.1`
ipeCfgBridgeNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.3.16.1.1.2`
ipeCfgBridgeIpAddress IPAddress set to bridge. Value range:0x00000000 - 0xdfffffff(0.0.0.0 - 223.255.255.255) It makes an error of the Internet Protocol address setting that overlaps in the port in the device. It becomes the f…	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.3.16.1.1.3`
ipeCfgBridgeNetMask Netmask set to bridge. When it isn't proper as subnetmask, it'll be an error. Value range:0x00000000 - 0xfffffffc(0 - 30bit) There can not be relation and it sets, and it refer the number of branch.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.3.16.1.1.4`
ipeCfgBridgeMtu MTU value of bridge. value range:256 to 1500 There can not be relation and it sets, and it refer the number of branch.	Integer32r/w Constraints: `range: 256-1500`	`.1.3.6.1.4.1.119.2.3.69.5.3.16.1.1.5`

ipeCfgBridgePortTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.16.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgBridgePortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgBridgePortTable'

Bridge set up information table.

ipeCfgBridgePortEntry row .1.3.6.1.4.1.119.2.3.69.5.3.16.2.1

entry of Bridge set up information table.

Indexes

ipeCfgBridgePortIfIndex

Column	Syntax	OID
ipeCfgBridgePortIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.5.3.16.2.1.1`
ipeCfgBridgePortNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.3.16.2.1.2`
ipeCfgBridgePortBridgeIndex Index value of bridge.	Integer32r/w Constraints: `range: 0-20`	`.1.3.6.1.4.1.119.2.3.69.5.3.16.2.1.3`

ipeCfgPripTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.17.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgPripTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgPripTable'

PRIP set up information table.

ipeCfgPripEntry row .1.3.6.1.4.1.119.2.3.69.5.3.17.1.1

entry of PRIP set up information table.

Indexes

ipeCfgPripIndex

Column Syntax OID

ipeCfgPripIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.3.17.1.1.1

ipeCfgPripNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.17.1.1.2

ipeCfgPripRouteEnable

Enable or disables PRIP.

enabled(1):PRIP is enabled.
disabled(2):PRIP is disabled.

Enumerationr/w

Enumerated Values:

0	invalid
1	enabled
2	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.17.1.1.3

ipeCfgPripUdpPort

Setting of UDP port number used with PRIP.

Either of 8520 or 520 is set.

This setting is valid since PRIP will start next time.

Enumerationr/w

Enumerated Values:

520	ripdefaultport
8520	pripdefaultport

.1.3.6.1.4.1.119.2.3.69.5.3.17.1.1.4

ipeCfgPripPortTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.17.2 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgPripPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgPripPortTable'

PRIP set up information table.(per port)

ipeCfgPripPortEntry row .1.3.6.1.4.1.119.2.3.69.5.3.17.2.1

entry of PRIP set up information table.(per port)

Indexes

ipeCfgPripPortIfIndex

Column Syntax OID

ipeCfgPripPortIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.5.3.17.2.1.1

ipeCfgPripPortNEAddress

reserved.

ipeCfgPripPortPropagateNetEnable

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.17.2.1.2

ipeCfgPripPortEnable

Setting of some port when PRIP will be enabled.

enabled(1) : this port is enabled.
disabled(2) : this port is disable.

Enumerationr/w

Enumerated Values:

0	invalid
1	enabled
2	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.17.2.1.3

Propagate setting for neighbor NE.

enabled(1) : this port is propagated.
disabled(2) : this port is not propagated.
(Do not register in the RIP route.)

Enumerationr/w

Enumerated Values:

0	invalid
1	enabled
2	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.17.2.1.4

ipeCfgNaptTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.18.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgNaptTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgNaptTable'

NAPT set up information table.

ipeCfgNaptEntry row .1.3.6.1.4.1.119.2.3.69.5.3.18.1.1

entry of NAPT set up information table.

Indexes

ipeCfgNaptIndex

Column Syntax OID

ipeCfgNaptIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.3.18.1.1.1

ipeCfgNaptNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.18.1.1.2

ipeCfgNaptEnable

Address translation invalid effective/setting by NAPT.
value range: enabled
disabled

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.119.2.3.69.5.3.18.1.1.3

ipeCfgStaticRouteTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.19.1 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgStaticRouteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgStaticRouteTable'

Static Routing set up information table.

ipeCfgStaticRouteEntry row .1.3.6.1.4.1.119.2.3.69.5.3.19.1.1

entry of Static Routing set up information table.

Indexes

ipeCfgRouteIndex

Column Syntax OID

ipeCfgRouteIndex

Index of this table.

Integer32

Constraints:
range: 1-128

.1.3.6.1.4.1.119.2.3.69.5.3.19.1.1.1

ipeCfgRouteNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.19.1.1.2

ipeCfgRouteDest

Static routing object destination address.
When masking in ipeCfgRouteMask, the host address part has to be
a zero, if any.
Value range:0x00000000-0xdfffffff(0.0.0.0-223.255.255.255)
The value acquisition when unsetting…

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.19.1.1.3

ipeCfgRouteMask

Static routing object subnet mask.
When it isn't proper as subnetmask, it'll be an error.
Value range:0x00000000-0xffffffff(0-32bit)
Only when ipeCfgRouteDest is 0, 0bit is allowed.
The value acquisition when unsetting …

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.19.1.1.4

ipeCfgRouteNextHop

Static routing object gateway address.
Value range:0x00000001 - 0xdfffffff(0.0.0.1 - 223.255.255.255)
The value acquisition when unsetting it returns NoSuchObject.

ipeCfgAccessListRuleEnableIndex

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.19.1.1.5

ipeCfgRouteRowStatus

This RowStatus has a status only 'active(1)'.

1) creating a entry
When you make a new entry, you must SET objects indicated below.
* ipeCfgRouteDest
* ipeCfgRouteMask
* ipeCfgRouteNextHop
* ipeCfgRouteRo…

Enumerationr/w

Enumerated Values:

1	active
4	createAndGo
6	destroy

.1.3.6.1.4.1.119.2.3.69.5.3.19.1.1.6

ipeCfgAccessListRuleTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.21.1 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgAccessListRuleTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgAccessListRuleTable'

Table of Access List(Rule).

ipeCfgAccessListRuleEntry row .1.3.6.1.4.1.119.2.3.69.5.3.21.1.1

Entry of Access List(Rule).

Indexes

Column Syntax OID

ipeCfgAccessListRuleEnableIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.3.21.1.1.1

ipeCfgAccessListRuleNEAddress

reserved.

ipeCfgAccessListInputRuleEnable

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.21.1.1.2

IP Access Control Input Filter Rule

Enumerationr/w

Enumerated Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.5.3.21.1.1.3

ipeCfgAccessListForwardRuleEnable

IP Access Control Forwarding Filter Rule

Enumerationr/w

Enumerated Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.5.3.21.1.1.4

ipeCfgAccessListInputDefaultAction

IP Access Control Input Default Action.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.119.2.3.69.5.3.21.1.1.5

ipeCfgAccessListForwardDefaultAction

IP Access Control Forwarding Default Action

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.119.2.3.69.5.3.21.1.1.6

ipeCfgAccessListInputTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.21.2 · 1 row entry · 9 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgAccessListInputTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgAccessListInputTable'

Table of Access List(Input Direction).

ipeCfgAccessListInputEntry row .1.3.6.1.4.1.119.2.3.69.5.3.21.2.1

Entry of Access List(Input Direction).

Indexes

ipeCfgAccessListInputOrderNum

Column Syntax OID

ipeCfgAccessListInputOrderNum

Index of table(1-50).

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.1

ipeCfgAccessListInputNEAddress

reserved.

ipeCfgAccessListInputInIfIndex

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.2

IP Access Control Input Filter Interface.

The value 'inband' is not supported.

Enumerationr/w

Enumerated Values:

0	any
3	inband
4	ne2
11	bridge1
12	bridge2
13	bridge3
14	bridge4
15	bridge5
16	bridge6
17	bridge7
18	bridge8
19	bridge9
20	bridge10
21	bridge11
22	bridge12
23	bridge13
24	bridge14
25	bridge15
26	bridge16
27	bridge17
28	bridge18
29	bridge19
30	bridge20

.1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.3

ipeCfgAccessListInputSrcIpAddress

IP Access Control Input Filter Source IP Address

ipeCfgAccessListInputSrcNetMask

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.4

IP Access Control Input Filter Source Subnet Mask.
'0.0.0.0' matches all IP addresses. i.e. '0.0.0.0' acts as
'Any'.

ipeCfgAccessListInputProtocol

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.5

IP Access Control Input Filter Protocol.
'-1' acts as 'Any'.

ipeCfgAccessListInputDstPortNum

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.6

IP Access Control Input Filter Port Number.
'-1' acts as 'Any'.

ipeCfgAccessListInputAction

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.7

IP Access Control Input Filter Action.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.8

ipeCfgAccessListInputRowStatus

This RowStatus has a status only 'active(1)'.

1) creating a entry
When you make a new entry, you must SET objects indicated below.
ipeCfgAccessListInputAction
ipeCfgAccessListInputRowStatus <- createAndG…

Enumerationr/w

Enumerated Values:

1	active
4	createAndGo
6	destroy

.1.3.6.1.4.1.119.2.3.69.5.3.21.2.1.9

ipeCfgAccessListForwardTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.21.3 · 1 row entry · 13 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgAccessListForwardTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgAccessListForwardTable'

Table of Access List(Forward Direction).

ipeCfgAccessListForwardEntry row .1.3.6.1.4.1.119.2.3.69.5.3.21.3.1

Entry of Access List(Forward Direction).

Indexes

ipeCfgAccessListForwardOrderNum

Column Syntax OID

ipeCfgAccessListForwardOrderNum

Index of table(1-50).

Integer32

Constraints:
range: 1-50

.1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.1

ipeCfgAccessListForwardNEAddress

reserved.

ipeCfgAccessListForwardInIfIndex

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.2

IP Access Control Forward Filter Input

Enumerationr/w

Enumerated Values:

0	any
3	inband
4	ne2
11	bridge1
12	bridge2
13	bridge3
14	bridge4
15	bridge5
16	bridge6
17	bridge7
18	bridge8
19	bridge9
20	bridge10
21	bridge11
22	bridge12
23	bridge13
24	bridge14
25	bridge15
26	bridge16
27	bridge17
28	bridge18
29	bridge19
30	bridge20

.1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.3

ipeCfgAccessListForwardOutIfIndex

IP Access Control Forward Filter Output Interface.

The value 'inband' is not supporte

Enumerationr/w

Enumerated Values:

0	any
3	inband
4	ne2
11	bridge1
12	bridge2
13	bridge3
14	bridge4
15	bridge5
16	bridge6
17	bridge7
18	bridge8
19	bridge9
20	bridge10
21	bridge11
22	bridge12
23	bridge13
24	bridge14
25	bridge15
26	bridge16
27	bridge17
28	bridge18
29	bridge19
30	bridge20

.1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.4

ipeCfgAccessListForwardSrcIpAddress

IP Access Control Forward Filter Source IP Address.

ipeCfgAccessListForwardSrcNetMask

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.5

IP Access Control Forward Filter Source Subnet Mask.
'0.0.0.0' matches all IP addresses. i.e. '0.0.0.0' acts as 'Any'

ipeCfgAccessListForwardDstIpAddress

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.6

IP Access Control Forward Filter Destination IP Address.

ipeCfgAccessListForwardDstNetMask

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.7

IP Access Control Forward Filter Destination Subnet Mask.
'0.0.0.0' matches all IP addresses. i.e. '0.0.0.0' acts as
'Any'.

ipeCfgAccessListForwardProtocol

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.8

IP Access Control Forward Filter Protocol.
'-1' acts as 'Any'.

ipeCfgAccessListForwardSrcPortNum

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.9

IP Access Control Forward Filter Source Port Number.
'-1' acts as 'Any'.

ipeCfgAccessListForwardDstPortNum

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.10

IP Access Control Forward Filter Destination Port Number.
'-1' acts as 'Any'.

ipeCfgAccessListForwardAction

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.11

IP Access Control Forward Filter Action.

Enumerationr/w

Enumerated Values:

1	permit
2	deny

.1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.12

ipeCfgAccessListForwardRowStatus

This RowStatus has a status only 'active(1)'.

1) creating a entry
When you make a new entry, you must SET objects indicated below.
ipeCfgAccessListForwardAction
ipeCfgAccessListForwardRowStatus <- create…

Enumerationr/w

Enumerated Values:

1	active
4	createAndGo
6	destroy

.1.3.6.1.4.1.119.2.3.69.5.3.21.3.1.13

ipeCfgAutoIpTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.22.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgAutoIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgAutoIpTable'

Table of AutoIP configuration information.

ipeCfgAutoIpEntry row .1.3.6.1.4.1.119.2.3.69.5.3.22.1.1

Entry of AutoIP configuration information.

Indexes

ipeCfgAutoIpIndex

Column	Syntax	OID
ipeCfgAutoIpIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.5.3.22.1.1.1`
ipeCfgAutoIpNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.3.22.1.1.2`
ipeCfgAutoIpNetworkAddress Aggregation Net of AutoIP. A set value becomes a binary. Value range:0x00000000-0xdfffffff(0.0.0.0-223.255.255.255) If this value is changed in state of 'now setting' or 'automatic setting', AutoIP will set IP Address a…	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.3.22.1.1.3`
ipeCfgAutoIpNetMask Aggregation NetMask of AutoIp. A set value becomes a binary. Value range:0x80000000-0xfffffffc(1-30bit) If this value is changed in state of 'now setting' or 'automatic setting', AutoIP will set IP Address again.	SNMPv2-SMIIpAddressr/w Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.3.22.1.1.4`

ipeCfgSysNE1PortTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.25 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgSysNE1PortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgSysNE1PortTable'

NE1 Port Mode Configuration Table.

ipeCfgSysNE1PortEntry row .1.3.6.1.4.1.119.2.3.69.5.3.25.1

Indexes

ipeCfgSysNE1PortIndex

Column Syntax OID

ipeCfgSysNE1PortIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.3.25.1.1

ipeCfgSysNE1PortNEAddress

reserved.

ipeCfgRadiusAuthServerExtIndex

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.25.1.2

ipeCfgSysNE1PortMode

NE1 Port Mode Configuration

Enumerationr/w

Enumerated Values:

0	invalid
1	userPort
2	mgmtPort

.1.3.6.1.4.1.119.2.3.69.5.3.25.1.3

ipeCfgRadiusGeneralTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.27.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgRadiusGeneralTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgRadiusGeneralTable'

Configure RADIUS parameters.

ipeCfgRadiusGeneralEntry row .1.3.6.1.4.1.119.2.3.69.5.3.27.1.1

...

Indexes

ipeCfgRadiusGeneralIndex

Column	Syntax	OID
ipeCfgRadiusGeneralIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.5.3.27.1.1.1`
ipeCfgRadiusGeneralNEAddress Reserved object for northbound interface.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.3.27.1.1.2`
ipeCfgRadiusGeneralAuthClientRetransmit Indicate maximum retransmit number of Access-Request message. The system retransmits Access-Request message to server according to this configuration.	Integer32r/w Constraints: `range: 0-255`	`.1.3.6.1.4.1.119.2.3.69.5.3.27.1.1.3`
ipeCfgRadiusGeneralAuthClientTimeout Indicate timeout period for response to Access-Request message. In case response (Access-Accept message) is not received in this period, the system will retransmit message.	secondsInteger32r/w Constraints: `range: 0-65535`	`.1.3.6.1.4.1.119.2.3.69.5.3.27.1.1.4`

ipeCfgRadiusAuthServerExtTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.27.2 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgRadiusAuthServerExtTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgRadiusAuthServerExtTable'

Configure RADIUS authentication server parameters.

ipeCfgRadiusAuthServerExtEntry row .1.3.6.1.4.1.119.2.3.69.5.3.27.2.1

...

Indexes

Column Syntax OID

ipeCfgRadiusAuthServerExtIndex

Index of this table.

Integer32

Constraints:
range: 1-3

.1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.1

ipeCfgRadiusAuthServerNEAddress

Reserved object for northbound interface.

ipeCfgRadiusAuthServerAddressType

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.2

Indicate IP address type of this server.

ipv4 : server has IPv4 address.
ipv6 : server has IPv6 address. (NOT SUPPORTED)

ipv6 will be supprted in future version.

Enumerationr/w

Enumerated Values:

0	invalid
1	ipv4
2	ipv6

.1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.3

ipeCfgRadiusAuthServerAddress

Indicate IP address of this server.

ipeCfgRadiusAuthClientServerPortNumber

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.4

Indicate port number of RADIUS authentication protocol on
this server.

Integer32r/w

Constraints:
range: 0-65535

.1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.5

ipeCfgRadiusAuthClientPasswordType

Indicate password authentication type. The system select
password attribute on Access-Request message.

user : use User-Password attribute.
chap : use CHAP-Password attribute.

See RFC 2865 f…

Enumerationr/w

Enumerated Values:

0	invalid
1	user
2	chap

.1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.6

ipeCfgRadiusAuthClientSecretKey

Indicate RADIUS shared secret encrypted by blowfish.
This object is used to confirm received RADIUS message is
sent from authenticated server.
This object is also used to encrypt User-Password attribute
on Access-Reque…

OctetStringr/w

Constraints:
range: 8-128

.1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.7

ipeCfgRadiusAuthServerExtRowStatus

The row status of this table.

SNMPv2-TCRowStatusr/w

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.119.2.3.69.5.3.27.2.1.8

ipeCfgRadiusPrivLevelGeneralTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.27.3 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgRadiusPrivLevelGeneralTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgRadiusPrivLevelGeneralTable'

Configure general privilege level for RADIUS
authetication.

ipeCfgRadiusPrivLevelGeneralEntry row .1.3.6.1.4.1.119.2.3.69.5.3.27.3.1

...

Indexes

ipeCfgRadiusPrivLevelGeneralIndex

Column Syntax OID

ipeCfgRadiusPrivLevelGeneralIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.3.27.3.1.1

ipeCfgRadiusPrivLevelGeneralNEAddress

Reserved object for northbound interface.

ipeCfgRadiusPrivLevelGeneralDefaultAction

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.27.3.1.2

Indicate system default action in case privilege level
is not specified on Access-Accept message or received
privilege level is set to disable in
ipeCfgRadiusGroupPrivLevelMappingEnable.

denyLogin …

Enumerationr/w

Enumerated Values:

0	invalid
1	denyLogin
2	useDefaultGroup

.1.3.6.1.4.1.119.2.3.69.5.3.27.3.1.3

ipeCfgRadiusPrivLevelGeneralDefaultGroup

Indicate default group in case privilege level is not
specified.
This object is effective only if
ipeCfgRadiusPrivLevelGeneralDefaultAction is
useDefaultGroup.

The value of this object should be registere…

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.119.2.3.69.5.3.27.3.1.4

ipeCfgRadiusGroupPrivLevelMappingTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.27.4 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgRadiusGroupPrivLevelMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgRadiusGroupPrivLevelMappingTable'

Configure privilege level mapping for RADIUS
authentication.

ipeCfgRadiusGroupPrivLevelMappingEntry row .1.3.6.1.4.1.119.2.3.69.5.3.27.4.1

...

Indexes

ipeCfgRadiusGroupPrivLevelMappingPrivLevel

Column Syntax OID

ipeCfgRadiusGroupPrivLevelMappingPrivLevel

The index of this table.
The value corresponds to received privilege level on
Access-Accept message.

Integer32

Constraints:
range: 0-15

.1.3.6.1.4.1.119.2.3.69.5.3.27.4.1.1

ipeCfgRadiusGroupPrivLevelMappingNEAddress

Reserved object for northbound interface.

ipeCfgRadiusGroupPrivLevelMappingEnable

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.3.27.4.1.2

Enable or disable privilege level mapping on this
privilege level.

disable : privilege level mapping is disabled.
enable : privilege level mapping is enabled.

The system default value of t…

Enumerationr/w

Enumerated Values:

0	invalid
1	disable
2	enable

.1.3.6.1.4.1.119.2.3.69.5.3.27.4.1.3

ipeCfgRadiusGroupPrivLevelMappingGroup

Indicate group name correspond to privilege level.
This object is effective only if
ipeCfgRadiusGroupPrivLevelMappingEnable is enable.
When the system received Access-Accept message with certain
privilege level, login …

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.119.2.3.69.5.3.27.4.1.4

ipeCfgLldpTable

table

.1.3.6.1.4.1.119.2.3.69.5.3.28.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeCfgLldpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeCfgLldpTable'

LLDP set up information table.

ipeCfgLldpEntry row .1.3.6.1.4.1.119.2.3.69.5.3.28.1.1

entry of LLDP set up information table.

Indexes

ipeCfgLldpIndex

Column	Syntax	OID
ipeCfgLldpIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.5.3.28.1.1.1`
ipeCfgLldpNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.3.28.1.1.2`
ipeCfgLldpProprietaryModeMacAddress MAC address of LLDP Frame in NEC mode. This object is effective only if ipeCfgPortXXXXXLldpMode is set to proprietaryMode.	SNMPv2-TCMacAddressr/w Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.5.3.28.1.1.3`

ipeNeighborInfoTable

table

.1.3.6.1.4.1.119.2.3.69.5.4.1 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeNeighborInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeNeighborInfoTable'

Neighbor NE table.

ipeNeighborInfoEntry row .1.3.6.1.4.1.119.2.3.69.5.4.1.1

Neighbor NE entry.

Indexes

ipeNeighborInfoIndex

Column	Syntax	OID
ipeNeighborInfoIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.5.4.1.1.1`
ipeNeighborInfoNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.4.1.1.2`
ipeNeighborIpAddress [iPASOLINK200/400/1000series/EX/iX] Neighbor NE is displayed as unit of registration every eight bytes of Internet Protocol address (4byte) + Node TYPE(4byte).The number of maximum registration is 30 (240byte). attentio…	OctetString Constraints: `range: 0-240`	`.1.3.6.1.4.1.119.2.3.69.5.4.1.1.3`

ipeStsNtpStatisticsTable

table

.1.3.6.1.4.1.119.2.3.69.5.6.1.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeStsNtpStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeStsNtpStatisticsTable'

Table of NTP statistics.

ipeStsNtpStatisticsEntry row .1.3.6.1.4.1.119.2.3.69.5.6.1.1.1

Entry of NTP statistics.

Indexes

ipeStsNtpStatisticsIndex

Column Syntax OID

ipeStsNtpStatisticsIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.6.1.1.1.1

ipeStsNtpStatisticsNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.6.1.1.1.2

ipeStsNtpSyncStatusInfo

Synchronous state information.

OctetString

Constraints:
range: 1-1024

.1.3.6.1.4.1.119.2.3.69.5.6.1.1.1.3

ipeStsNtpSetTime

Presence of time manual setting.

Enumeration

Enumerated Values:

0	notSetManually
1	setManually

.1.3.6.1.4.1.119.2.3.69.5.6.1.1.1.4

ipeStsFtpStatusTable

table

.1.3.6.1.4.1.119.2.3.69.5.6.2.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeStsFtpStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeStsFtpStatusTable'

Table of FTP status.

ipeStsFtpStatusEntry row .1.3.6.1.4.1.119.2.3.69.5.6.2.1.1

Entry of FTP status.

Indexes

ipeStsFtpStatusIndex

Column	Syntax	OID
ipeStsFtpStatusIndex Index of this table.	Integer32 Constraints: `range: 1-3`	`.1.3.6.1.4.1.119.2.3.69.5.6.2.1.1.1`
ipeStsFtpStatusNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.6.2.1.1.2`
ipeStsFtpStatusLoginUser Name of Connected user.	OctetString Constraints: `range: 1-31`	`.1.3.6.1.4.1.119.2.3.69.5.6.2.1.1.3`
ipeStsFtpStatusLoginIpAddress IP Address of Connected user .	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.6.2.1.1.4`
ipeStsFtpStatusSessionId Session information of Connected User.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.5.6.2.1.1.5`

ipeStsSftpStatusTable

table

.1.3.6.1.4.1.119.2.3.69.5.6.3.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeStsSftpStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeStsSftpStatusTable'

Table of SFTP status .

ipeStsSftpStatusEntry row .1.3.6.1.4.1.119.2.3.69.5.6.3.1.1

Entry of SFTP status .

Indexes

ipeStsSftpStatusIndex

Column	Syntax	OID
ipeStsSftpStatusIndex Index of this table.	Integer32 Constraints: `range: 1-3`	`.1.3.6.1.4.1.119.2.3.69.5.6.3.1.1.1`
ipeStsSftpStatusNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.6.3.1.1.2`
ipeStsSftpStatusLoginUser Name of Connected user.	OctetString Constraints: `range: 1-31`	`.1.3.6.1.4.1.119.2.3.69.5.6.3.1.1.3`
ipeStsSftpStatusLoginIpAddress IP Address of Connected user .	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.6.3.1.1.4`
ipeStsSftpStatusSessionId Session information of Connected User.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.5.6.3.1.1.5`

ipeStsHttpStatusTable

table

.1.3.6.1.4.1.119.2.3.69.5.6.4.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeStsHttpStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeStsHttpStatusTable'

Table of HTTP status.

ipeStsHttpStatusEntry row .1.3.6.1.4.1.119.2.3.69.5.6.4.1.1

Entry of HTTP status.

Indexes

ipeStsHttpStatusIndex

Column	Syntax	OID
ipeStsHttpStatusIndex Index of this table.	Integer32 Constraints: `range: 1-5`	`.1.3.6.1.4.1.119.2.3.69.5.6.4.1.1.1`
ipeStsHttpStatusNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.6.4.1.1.2`
ipeStsHttpStatusLoginUser Name of Connected user.	OctetString Constraints: `range: 1-31`	`.1.3.6.1.4.1.119.2.3.69.5.6.4.1.1.3`
ipeStsHttpStatusLoginIpAddress IP Address of Connected user .	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.6.4.1.1.4`
ipeStsHttpStatusSessionId Session information of Connected User.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.5.6.4.1.1.5`

ipeStsHttpsStatusTable

table

.1.3.6.1.4.1.119.2.3.69.5.6.5.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeStsHttpsStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeStsHttpsStatusTable'

Table of HTTPS status.

ipeStsHttpsStatusEntry row .1.3.6.1.4.1.119.2.3.69.5.6.5.1.1

Entry of HTTPS status.

Indexes

ipeStsHttpsStatusIndex

Column	Syntax	OID
ipeStsHttpsStatusIndex Index of this table.	Integer32 Constraints: `range: 1-5`	`.1.3.6.1.4.1.119.2.3.69.5.6.5.1.1.1`
ipeStsHttpsStatusNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.6.5.1.1.2`
ipeStsHttpsStatusLoginUser Name of Connected user.	OctetString Constraints: `range: 1-31`	`.1.3.6.1.4.1.119.2.3.69.5.6.5.1.1.3`
ipeStsHttpsStatusLoginIpAddress IP Address of Connected user.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.6.5.1.1.4`
ipeStsHttpsStatusSessionId Session information of Connected User.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.5.6.5.1.1.5`

ipeStsStpBridgeTable

table

.1.3.6.1.4.1.119.2.3.69.5.6.6.1 · 1 row entry · 9 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeStsStpBridgeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeStsStpBridgeTable'

Table of STP status.

ipeStsStpBridgeEntry row .1.3.6.1.4.1.119.2.3.69.5.6.6.1.1

entry of STP status.

Indexes

ipeStsStpBridgeIndex

Column Syntax OID

ipeStsStpBridgeIndex

Index of this table.

Integer32

Constraints:
range: 1-20

.1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.1

ipeStsStpBridgeNEAddress

reserved.

ipeStsStpBridgeProtocolSpecification

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.2

An indication of what version of the Spanning Tree Protocol is
being run. The value 'decLb100(2)' indicates the DEC LANbridge
100 Spanning Tree protocol. IEEE 802.1d implementations will
return 'ieee8021d(3)'. If fut…

Enumeration

Enumerated Values:

1	unknown
2	decLb100
3	ieee8021d

.1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.3

ipeStsStpBridgeDesignatedRoot

The bridge identifier of the root of the spanning tree as
determined by the Spanning Tree Protocol as executed by this
node. This value is used as the Root Identifier parameter in all
Configuration Bridge PDUs originat…

BRIDGE-MIBBridgeId

Type Constraints:
range: 8

.1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.4

ipeStsStpBridgeRootCost

The cost of the path to the root as seen from this bridge.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.5

ipeStsStpBridgeRootPort

The port number of the port which offers the lowest cost path
from this bridge to the root bridge.

ipeStsStpBridgeForwardDelay

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.6

ipeStsStpBridgeMaxAge

The maximum age of Spanning Tree Protocol information learned
from the network on any port before it is discarded, in units of
hundredths of
a second. This is the actual value that this bridge is currently
using.

BRIDGE-MIBTimeout

.1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.7

ipeStsStpBridgeHelloTime

The amount of time between the transmission of Configuration
bridge PDUs by this node on any port when it is the root of the
spanning tree or trying to become so, in units of hundredths of a
second. This is the actual v…

BRIDGE-MIBTimeout

.1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.8

This time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the
port stays in each of the Li…

BRIDGE-MIBTimeout

.1.3.6.1.4.1.119.2.3.69.5.6.6.1.1.9

ipeStsStpPortTable

table

.1.3.6.1.4.1.119.2.3.69.5.6.6.2 · 1 row entry · 8 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeStsStpPortTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeStsStpPortTable'

table of STP port status.
When the system is running on the mplsTp mode, this table may
return wrong value. (must not use this table on mplsTp mode).

ipeStsStpPortEntry row .1.3.6.1.4.1.119.2.3.69.5.6.6.2.1

entry of STP port status table.

Indexes

ipeStsStpPortIfIndex ipeStsStpPortBridgeIndex

Column Syntax OID

ipeStsStpPortIfIndex

Index of this table.

Type Constraints:
range: 1..2147483647

Description:

.1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.1

ipeStsStpPortBridgeIndex

Index of this table.

Integer32

Constraints:
range: 1-20

.1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.2

ipeStsStpPortNEAddress

reserved.

ipeStsStpPortDesignatedRoot

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.3

ipeStsStpPortPortState

The port's current state as defined by application of the
Spanning Tree Protocol.

Enumeration

Enumerated Values:

1	disabled
2	blocking
3	listening
4	learning
5	forwarding
6	broken

.1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.4

The unique Bridge Identifier of the Bridge recorded as the Root
in the Configuration BPDUs transmitted by the Designated Bridge
for the segment to which the port is attached.

BRIDGE-MIBBridgeId

Type Constraints:
range: 8

.1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.5

ipeStsStpPortDesignatedCost

The path cost of the Designated Port of the segment connected to
this port. This value is compared to the Root Path Cost field in
received bridge PDUs.

ipeStsStpPortDesignatedBridge

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.6

The Bridge Identifier of the bridge which this port considers to
be the Designated Bridge for this port's segment.

BRIDGE-MIBBridgeId

Type Constraints:
range: 8

.1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.7

ipeStsStpPortDesignatedPort

The Port Identifier of the port on the Designated Bridge for
this port's segment.

OctetString

Constraints:
range: 2-2

.1.3.6.1.4.1.119.2.3.69.5.6.6.2.1.8

ipeStsPortEtherTable

table

.1.3.6.1.4.1.119.2.3.69.5.6.7.1 · 1 row entry · 6 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeStsPortEtherTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeStsPortEtherTable'

Table of port status.

ipeStsPortEtherEntry row .1.3.6.1.4.1.119.2.3.69.5.6.7.1.1

entry of port status table.

Indexes

ipeStsPortEtherIfIndex

Column	Syntax	OID
ipeStsPortEtherIfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.5.6.7.1.1.1`
ipeStsPortEtherNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.6.7.1.1.2`
ipeStsPortEtherLinkUp Link Up/Down of I/F. value range:1 LinkUp 2 LinkDown	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.5.6.7.1.1.3`
ipeStsPortEtherSpeed SpeedI of I/F. value range:10 10Mb/s 100 100Mb/s 1000 1000Mb/s	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.5.6.7.1.1.4`
ipeStsPortEtherDuplex Duplex of I/F. value range:1 half duplex 2 full duplex	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.5.6.7.1.1.5`
ipeStsPortEtherFlowControl FlowControl of I/F. value range:0 flowctl none 1 receive only 2 transfer only 3 receive and transfer	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.5.6.7.1.1.6`

ipeStsPortNe2Table

table

.1.3.6.1.4.1.119.2.3.69.5.6.7.2 · 1 row entry · 3 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeStsPortNe2Table

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeStsPortNe2Table'

Table of NE2 port status table.

ipeStsPortNe2Entry row .1.3.6.1.4.1.119.2.3.69.5.6.7.2.1

entry of NE2 port status entry.

Indexes

ipeStsPortNe2IfIndex

Column	Syntax	OID
ipeStsPortNe2IfIndex Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.5.6.7.2.1.1`
ipeStsPortNe2NEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.6.7.2.1.2`
ipeStsPortNe2LinkUp Link Up/Down of I/F.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.5.6.7.2.1.3`

ipeStsBridgeFdbTable

table obsolete

.1.3.6.1.4.1.119.2.3.69.5.6.8.1 · 1 row entry · 5 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeStsBridgeFdbTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeStsBridgeFdbTable'

Learning MAC table of bridge.

ipeStsBridgeFdbEntry row .1.3.6.1.4.1.119.2.3.69.5.6.8.1.1

Learning MAC table entry of bridge.

Indexes

ipeStsBridgeFdbBridgeIndex ipeStsBridgeFdbIfIndex ipeStsBridgeFdbIndex

Column	Syntax	OID
ipeStsBridgeFdbBridgeIndexobsolete Index of this table.	Integer32 Constraints: `range: 1-20`	`.1.3.6.1.4.1.119.2.3.69.5.6.8.1.1.1`
ipeStsBridgeFdbIfIndexobsolete Index of this table.	IF-MIBInterfaceIndex Type Constraints: `range: 1..2147483647` Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	`.1.3.6.1.4.1.119.2.3.69.5.6.8.1.1.2`
ipeStsBridgeFdbIndexobsolete Index of this table.	Integer32 Constraints: `range: 1-63`	`.1.3.6.1.4.1.119.2.3.69.5.6.8.1.1.3`
ipeStsBridgeFdbNEAddressobsolete reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.6.8.1.1.4`
ipeStsBridgeFdbAddressobsolete Learning MAC address of bridge. When Snmpwalk is done, it becomes operation like ReadCreate.	SNMPv2-TCMacAddress Type Constraints: `range: 6` Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	`.1.3.6.1.4.1.119.2.3.69.5.6.8.1.1.5`

ipeStsAutoIpTable

table

.1.3.6.1.4.1.119.2.3.69.5.6.9.1 · 1 row entry · 4 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeStsAutoIpTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeStsAutoIpTable'

Table of AutoIP status.

ipeStsAutoIpEntry row .1.3.6.1.4.1.119.2.3.69.5.6.9.1.1

entry of AutoIP status table.

Indexes

ipeStsAutoIpIndex

Column	Syntax	OID
ipeStsAutoIpIndex Index of this table.	Integer32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.119.2.3.69.5.6.9.1.1.1`
ipeStsAutoIpNEAddress reserved.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.6.9.1.1.2`
ipeStsAutoIpState AutoIP state information. Valid Value (1:before setting<initial value>,2:now setting, 3:automatic setting,4:manual setting).	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.119.2.3.69.5.6.9.1.1.3`
ipeStsAutoIpTempAddress Temporary IP Address of AutoIP setting. initial value = 0.0.0.0 other value = Temporary IP Address If AutoIP state information is 3, Temporary IP Address is valid value.	SNMPv2-SMIIpAddress Type Constraints: `range: 4`	`.1.3.6.1.4.1.119.2.3.69.5.6.9.1.1.4`

ipeAccessTable

table

.1.3.6.1.4.1.119.2.3.69.5.7.1 · 1 row entry · 7 columns

Open in standard view

Uses the nec variant from /opt/observium/mibs/nec.

Command help

Walk ipeAccessTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IPE-SYSTEM-MIB' -M '/opt/observium/mibs/nec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IPE-SYSTEM-MIB::ipeAccessTable'

A table of SNMP access information.

ipeAccessEntry row .1.3.6.1.4.1.119.2.3.69.5.7.1.1

A set of SNMP access information.
All OID don't check that a set value is valid or invalid.

Indexes

ipeAccessIndex

Column Syntax OID

ipeAccessIndex

Index of this table.

Integer32

Constraints:
range: 1-1

.1.3.6.1.4.1.119.2.3.69.5.7.1.1.1

ipeAccessNEAddress

reserved.

Type Constraints:
range: 4

.1.3.6.1.4.1.119.2.3.69.5.7.1.1.2

ipeAccessUserName

A user name which is used for CTRL-TRAP and logging.
When you send SET-Request, it is necessary to SET this OID to
first 'variable-bindings' of the SET-Request PDU.

Please use an ASCII code.
…

OctetStringr/w

Constraints:
range: 1-32

.1.3.6.1.4.1.119.2.3.69.5.7.1.1.3

ipeAccessFromAddress

A source IP address which is used for CTRL-TRAP and logging.
The use is optional.

When this OID is read, 0.0.0.0 is returned.