INFINERA-TP-BMMOCGPTP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
15

bmmOcgPtpTable

table
.1.3.6.1.4.1.21296.2.2.2.2.3.1 · 1 row entry · 15 columns
Open in standard view
Uses the infinera variant from /opt/observium/mibs/infinera.
Command help
Walk bmmOcgPtpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'INFINERA-TP-BMMOCGPTP-MIB' -M '/opt/observium/mibs/infinera:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'INFINERA-TP-BMMOCGPTP-MIB::bmmOcgPtpTable' 
A list of BmmOcgPtp entries. Each entry is uniquely identified by the value of ifIndex.
bmmOcgPtpEntry row .1.3.6.1.4.1.21296.2.2.2.2.3.1.1
A BmmOcgPtp entry containing information pertaining to Infinera BMM OCG PTP interfaces.
This table is a subclass of IfCommon. Entries will exist in this table only for interfaces
of type BMM OCG PTP.
Indexes
Column Syntax OID
bmmOcgPtpDiscoveredOcgTP
This refers to the name of the LM/BMM OCG PTP to which this fiber is connected.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.1
bmmOcgPtpProvisionedOcgTP
This refers to the name of the LM/BMM OCG PTP to which this fiber is configured.
If the configured does not match the discovered, a mismatch alarm shall be raised.
If this attribute is a zero-length string, the attribut…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.2
bmmOcgPtpOcgNumber
The OCG number that this BMM OCG TP is associated to. This maps 1-to-1 with the DLM/XLM type.
Auto-discovery processes needs to ensure that the ocgNumber and the DLM/XLM type are
compatible before turning the DLM on.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.3
bmmOcgPtpOcgPowerControlLoop
Parameter that indicates whether OCG Control Loop is enabled or disabled.
INFINERA-TC-MIBInfnPowerControlLoopr/w
Type Values:
1disabled
2enabled
 .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.4
bmmOcgPtpTargetRxOcgPower
The target power per OCG, computed by the BMM.
INFINERA-TC-MIBFloatTenths
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
 .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.5
bmmOcgPtpMuxInsertionLoss
The insertion loss from the OCG input to the TX EDFA Input.
INFINERA-TC-MIBFloatTenths
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
 .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.6
bmmOcgPtpDeMuxInsertionLoss
The insertion loss from the RX EDFA Output to the OCG Output.
INFINERA-TC-MIBFloatTenths
Description:
An integer representation of a fractional number. The transmitted value is the actual value
multiplied by 10 and rounded to the nearest Integer. The management station should divide
the transmitted value by 10 to derive…
 .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.7
bmmOcgPtpPmHistStatsEnable
Flag to enable or disable PM collection.
INFINERA-TC-MIBInfnPmHistStatsControlr/w
Type Values:
1enabled
2disabled
3unknown
 .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.8
bmmOcgPtpOcgPortConfig
Parameter that indicates whether the BMM OCG is configured as Express or Add/Drop.
INFINERA-TC-MIBInfnOcgPortConfig
Type Values:
1unknown
2addDrop
3express
4manual
 .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.9
bmmOcgPtpOcgSignalType
Signal type carried over OCG.
INFINERA-TC-MIBInfnSignalTyper/w
Type Values:
1normal
2manual
3openAutomatedAddDrop
4openAutomatedExpress
 .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.10
bmmOcgPtpOcgActiveChannelMap
By default, the ocgChannelMap attribute is Zero which implies that the OCG is not carrying alien
wavelengths.If the OCG is carrying alien waves (as defined by the ALIEN attribute),
the OCG value should be set to a list…
INFINERA-TC-MIBInfnOcgChannelMapr/w
Type Values:
0ch1
1ch2
2ch3
3ch4
4ch5
5ch6
6ch7
7ch8
8ch9
9ch10
 .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.11
bmmOcgPtpDiscoveredRemoteTP
Discovered Remote TP
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.12
bmmOcgPtpAutoDiscSoakTime
 SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.13
bmmOcgPtpShutterState
 INFINERA-TC-MIBInfnShutterStater/w
Type Values:
1open
2closed
3closedDemux
4closedMux
 .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.14
bmmOcgPtpProvOpenWaveRemotePtp
OCG value should be set to Manual in order to provision this attribute
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.15