bmmOcgPtpShutterState
INFINERA-TP-BMMOCGPTP-MIB ·
.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.14
Object
No description available.
Context
- MIB
- INFINERA-TP-BMMOCGPTP-MIB
- OID
.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- bmmOcgPtpEntry
- Table
- bmmOcgPtpTable
- Siblings
- 14
Syntax
INFINERA-TC-MIBInfnShutterState
- Source
- INFINERA-TC-MIBInfnShutterState
- Base type
Enumeration
Values & Constraints
Type Values
1 | open |
2 | closed |
3 | closedDemux |
4 | closedMux |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bmmOcgPtpDiscoveredOcgTP This refers to the name of the LM/BMM OCG PTP to which this fiber is connected. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.1 |
| bmmOcgPtpOcgSignalType Signal type carried over OCG. | column | INFINERA-TC-MIBInfnSignalType | .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.10 |
| bmmOcgPtpOcgActiveChannelMap By default, the ocgChannelMap attribute is Zero which implies that the OCG is not carrying alien
wavelengths.If the OCG is carrying alien waves (as defined by the ALIEN attribute)… | column | INFINERA-TC-MIBInfnOcgChannelMap | .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.11 |
| bmmOcgPtpDiscoveredRemoteTP Discovered Remote TP | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.12 |
| bmmOcgPtpAutoDiscSoakTime | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.13 |
| bmmOcgPtpProvOpenWaveRemotePtp OCG value should be set to Manual in order to provision this attribute | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.15 |
| bmmOcgPtpProvisionedOcgTP This refers to the name of the LM/BMM OCG PTP to which this fiber is configured.
If the configured does not match the discovered, a mismatch alarm shall be raised.
If this attribu… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.2 |
| bmmOcgPtpOcgNumber The OCG number that this BMM OCG TP is associated to. This maps 1-to-1 with the DLM/XLM type.
Auto-discovery processes needs to ensure that the ocgNumber and the DLM/XLM type are
… | column | Integer32 | .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.3 |
| bmmOcgPtpOcgPowerControlLoop Parameter that indicates whether OCG Control Loop is enabled or disabled. | column | INFINERA-TC-MIBInfnPowerControlLoop | .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.4 |
| bmmOcgPtpTargetRxOcgPower The target power per OCG, computed by the BMM. | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.5 |
| bmmOcgPtpMuxInsertionLoss The insertion loss from the OCG input to the TX EDFA Input. | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.6 |
| bmmOcgPtpDeMuxInsertionLoss The insertion loss from the RX EDFA Output to the OCG Output. | column | INFINERA-TC-MIBFloatTenths | .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.7 |
| bmmOcgPtpPmHistStatsEnable Flag to enable or disable PM collection. | column | INFINERA-TC-MIBInfnPmHistStatsControl | .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.8 |
| bmmOcgPtpOcgPortConfig Parameter that indicates whether the BMM OCG is configured as Express or Add/Drop. | column | INFINERA-TC-MIBInfnOcgPortConfig | .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.9 |