bmmOcgPtpOcgActiveChannelMap

INFINERA-TP-BMMOCGPTP-MIB · .1.3.6.1.4.1.21296.2.2.2.2.3.1.1.11
MIB view Table view

Object

column r/w INFINERA-TC-MIBInfnOcgChannelMap 
By default, the ocgChannelMap attribute is Zero which implies that the OCG is not carrying alien
wavelengths.If the OCG is carrying alien waves (as defined by the ALIEN attribute), 
the OCG value should be set to a list of active channels on the alien OCG populated.

Context

MIB
INFINERA-TP-BMMOCGPTP-MIB
OID
.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.11
Type
column
Access
readwrite
Status
current
Parent
bmmOcgPtpEntry
Table
bmmOcgPtpTable
Siblings
14

Syntax

INFINERA-TC-MIBInfnOcgChannelMap
Source
INFINERA-TC-MIBInfnOcgChannelMap
Base type
Bits

Values & Constraints

Type Values
0ch1
1ch2
2ch3
3ch4
4ch5
5ch6
6ch7
7ch8
8ch9
9ch10

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
bmmOcgPtpDiscoveredOcgTP
This refers to the name of the LM/BMM OCG PTP to which this fiber is connected.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.1
bmmOcgPtpOcgSignalType
Signal type carried over OCG.
columnINFINERA-TC-MIBInfnSignalType.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.10
bmmOcgPtpDiscoveredRemoteTP
Discovered Remote TP
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.12
bmmOcgPtpAutoDiscSoakTimecolumnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.13
bmmOcgPtpShutterStatecolumnINFINERA-TC-MIBInfnShutterState.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.14
bmmOcgPtpProvOpenWaveRemotePtp
OCG value should be set to Manual in order to provision this attribute
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.15
bmmOcgPtpProvisionedOcgTP
This refers to the name of the LM/BMM OCG PTP to which this fiber is configured. If the configured does not match the discovered, a mismatch alarm shall be raised. If this attribu…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.2
bmmOcgPtpOcgNumber
The OCG number that this BMM OCG TP is associated to. This maps 1-to-1 with the DLM/XLM type. Auto-discovery processes needs to ensure that the ocgNumber and the DLM/XLM type are …
columnInteger32.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.3
bmmOcgPtpOcgPowerControlLoop
Parameter that indicates whether OCG Control Loop is enabled or disabled.
columnINFINERA-TC-MIBInfnPowerControlLoop.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.4
bmmOcgPtpTargetRxOcgPower
The target power per OCG, computed by the BMM.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.5
bmmOcgPtpMuxInsertionLoss
The insertion loss from the OCG input to the TX EDFA Input.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.6
bmmOcgPtpDeMuxInsertionLoss
The insertion loss from the RX EDFA Output to the OCG Output.
columnINFINERA-TC-MIBFloatTenths.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.7
bmmOcgPtpPmHistStatsEnable
Flag to enable or disable PM collection.
columnINFINERA-TC-MIBInfnPmHistStatsControl.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.8
bmmOcgPtpOcgPortConfig
Parameter that indicates whether the BMM OCG is configured as Express or Add/Drop.
columnINFINERA-TC-MIBInfnOcgPortConfig.1.3.6.1.4.1.21296.2.2.2.2.3.1.1.9