IEC-62439-3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
4
Rows
4
Columns
52

lreInterfaceConfigTable

table
.1.0.62439.2.21.0.1.0.1 · 1 row entry · 19 columns
Open in standard view 
list of PRP/HSR LREs. Each entry corresponds to one PRP/HSR Link Redundancy 
Entity (LRE), each representing a pair of LAN ports A and B. Basic devices 
supporting PRP/HSR may have only one LRE and thus one entry in the table, 
while more complex
devices may have several entries for multiple LREs.
lreInterfaceConfigEntry entry .1.0.62439.2.21.0.1.0.1.1
each entry contains management information applicable to a particular LRE.
Indexes
lreInterfaceConfigIndex
Column Syntax OID
lreInterfaceConfigIndex
A unique value for each LRE.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.0.1.0.1.1.1
lreRowStatus
indicates the status of the LRE table entry
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.0.62439.2.21.0.1.0.1.1.2
lreNodeType
specifies the operation mode of the LRE:PRP mode 1(1), HSR mode(2)
Note: PRP mode 0 is considered deprecated and is not supported by this revision
of the MIB
Enumerationr/w
Enumerated Values:
1prpmode1
2hsr
 .1.0.62439.2.21.0.1.0.1.1.3
lreNodeName
specifies this LRE's node name
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.0.62439.2.21.0.1.0.1.1.4
lreVersionName
specifies the version of this LRE's software
OctetString
Constraints:
range: 1-32
 .1.0.62439.2.21.0.1.0.1.1.5
lreMacAddress
Specified the MAC address to be used by this LRE, MAC addresses are
identical for all ports of a single LRE
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.0.62439.2.21.0.1.0.1.1.6
lrePortAdminStateA
Specifies whether the port A shall be active or not Active
through administrative action (Default: active).
Enumerationr/w
Enumerated Values:
1notActive
2active
 .1.0.62439.2.21.0.1.0.1.1.7
lrePortAdminStateB
Specifies whether the port B shall be active or not Active
through administrative action (Default: active).
Enumerationr/w
Enumerated Values:
1notActive
2active
 .1.0.62439.2.21.0.1.0.1.1.8
lreLinkStatusA
shows the actual link status of the LRE's port A
Enumeration
Enumerated Values:
1up
2down
 .1.0.62439.2.21.0.1.0.1.1.9
lreLinkStatusB
shows the actual link status of the LRE's port B
Enumeration
Enumerated Values:
1up
2down
 .1.0.62439.2.21.0.1.0.1.1.10
lreDuplicateDiscard
specifies whether a duplicate discard algorithm is used at
reception (Default: discard).
Enumerationr/w
Enumerated Values:
1doNotDiscard
2discard
 .1.0.62439.2.21.0.1.0.1.1.11
lreTransparentReception
if removeRCT is configured, the RCT is removed when
forwarding to the upper
layers, only applicable for PRP LRE (Default: removeRCT).
Enumerationr/w
Enumerated Values:
1removeRCT
2passRCT
 .1.0.62439.2.21.0.1.0.1.1.12
lreHsrLREMode
This enumeration is only applicable if the LRE is an HSR bridging node or RedBox.
It shows the mode of the HSR LRE:
(1) Default mode: The HSR LRE is in mode h and bridges tagged HSR traffic
(2) Optional mode: The HSR LR…
Enumerationr/w
Enumerated Values:
1modeh
2moden
3modet
4modeu
5modem
 .1.0.62439.2.21.0.1.0.1.1.13
lreSwitchingEndNode
This enumeration shows which feature is enabled in this
particular LRE:
(1): an unspecified non-bridging node, e.g. SRP.
(2): an unspecified bridging node, e.g. RSTP.
(3): a PRP node/RedBox.
(4): an HSR RedBox with regu…
Enumerationr/w
Enumerated Values:
1nonbridgingnode
2bridgingunspecified
3prpnode
4hsrredboxsan
5hsrnode
6hsrredboxhsr
7hsrredboxprpa
8hsrredboxprpb
 .1.0.62439.2.21.0.1.0.1.1.14
lreRedBoxIdentity
Applicable to RedBox HSR-PRP A and RedBox HSR-PRP B. One ID
is used by
one pair of RedBoxes (one configured to A and one configured to B)
coupling an HSR ring to a PRP network. The integer value states the value
of th…
Enumerationr/w
Enumerated Values:
2id1a
3id1b
4id2a
5id2b
6id3a
7id3b
8id4a
9id4b
10id5a
11id5b
12id6a
13id6b
14id7a
15id7b
 .1.0.62439.2.21.0.1.0.1.1.15
lreEvaluateSupervision
True if the LRE evaluates received supervision frames. False if it
drops the supervision frames without evaluating. Note: LREs are required
to send supervision frames, but reception is optional.
Default value is depend…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.0.62439.2.21.0.1.0.1.1.16
lreNodesTableClear
specifies that the Node Table is to be cleared
Enumerationr/w
Enumerated Values:
0noOp
1clearNodeTable
 .1.0.62439.2.21.0.1.0.1.1.17
lreProxyNodeTableClear
specifies that the Proxy Node Table is to be cleared
Enumerationr/w
Enumerated Values:
0noOp
1clearProxyNodeTable
 .1.0.62439.2.21.0.1.0.1.1.18
lreDupListResideMaxTime
the longest time an entry may reside in the duplicates list,
expressed as the number of seconds multiplied by 65536;
the default value is 26214 x 15 us, or 400 ms; too low a value can
cause broadcast storms
binaryFractionOfSecondSecondFractionr/w
Textual Convention: SecondFraction Integer32
 .1.0.62439.2.21.0.1.0.1.1.19

lreInterfaceStatsTable

table
.1.0.62439.2.21.1.1.0.1 · 1 row entry · 26 columns
Open in standard view 
list of PRP/HSR LREs. Each entry corresponds
to one PRP/HSR Link Redundancy Entity (LRE), each representing a
pair of LAN ports A and B and a port C towards the application/interlink. Basic devices supporting PRP/HSR may have only one LRE and thus one entry in
the table, while more complex devices may have several entries for multiple LREs.
lreInterfaceStatsEntry entry .1.0.62439.2.21.1.1.0.1.1
An entry containing management information applicable to a particular LRE.
Indexes
lreInterfaceStatsIndex
Column Syntax OID
lreInterfaceStatsIndex
A unique value for each LRE.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.1
lreCntTxA
number of frames sent over port A that are HSR tagged or
fitted with a PRP
Redundancy Control Trailer.
Only frames that are HSR tagged or do have a PRP RCT are counted.
A frame aborted during the transmission is not co…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.2
lreCntTxB
number of frames sent over port B that are HSR tagged or
fitted with a PRP
Redundancy Control Trailer.
Only frames that are HSR tagged or do have a PRP RCT are counted.
A frame aborted during the transmission is not co…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.3
lreCntTxC
number of frames sent towards the application interface of
the DANP or DANH
or over the interlink of the RedBox. Frames with and without PRP RCT or HSR
tag are counted, but not link-local frames.
A frame aborted during…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.4
lreCntErrWrongLanA
number of frames with the wrong LAN identifier received on LRE port A.
Initial value = 0. Only applicable to PRP ports.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.5
lreCntErrWrongLanB
number of frames with the wrong LAN identifier received on LRE port B.
Initial value = 0. Only applicable to PRP ports.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.6
lreCntErrWrongLanC
number of frames with the wrong LAN identifier received on the interlink of
a RedBox. Only applicable to HSR RedBoxes in HSR-PRP configuration
(hsrredboxprpa and hsrredboxprpb).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.7
lreCntRxA
number of frames received on a LRE port A. Only frames that
are HSR tagged
or fitted with a PRP Redundancy Control Trailer are counted.
Frames that are not forwarded anywhere (e.g. because the sender of the frame
is i…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.8
lreCntRxB
number of frames received on a LRE port B. Only frames that
are HSR tagged
or fitted with a PRP Redundancy Control Trailer are counted. Frames that are
not forwarded anywhere (e.g. because the sender of the frame is in…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.9
lreCntRxC
number of frames received from the application interface of a
DANP or DANH or
the number of number of frames received on the interlink of a RedBox. Frames
with and without PRP RCT or HSR tag are counted, but not link-l…
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.10
lreCntErrorsA
number of frames with errors received on this LRE port A. Initial value 0.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.11
lreCntErrorsB
number of frames with errors received on this LRE port B. Initial value = 0.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.12
lreCntErrorsC
number of frames with errors received on the application interface of a DANP
or DANH or on the interlink of a RedBox. Initial value = 0.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.13
lreCntNodes
number of nodes in the Nodes Table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.0.62439.2.21.1.1.0.1.1.14
lreCntProxyNodes
number of nodes in the Proxy Node Table. Only applicable to
RedBox. Initial value = 0.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.0.62439.2.21.1.1.0.1.1.15
lreCntUniqueA
number of entries in the duplicate detection mechanism on
port A for which no duplicate was received.
Initial value = 0.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.16
lreCntUniqueB
number of entries in the duplicate detection mechanism on port B for which
no duplicate was received.
Initial value = 0.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.17
lreCntUniqueC
number of entries in the duplicate detection mechanism on the
application interface
of the DAN or the interlink of the RedBox for which no duplicate was received.
Initial value = 0.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.18
lreCntDuplicateA
number of entries in the duplicate detection mechanism on port A for which
one single duplicate was received. Initial value 0.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.19
lreCntDuplicateB
number of entries in the duplicate detection mechanism on port B for which
one single duplicate was received. Initial value 0.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.20
lreCntDuplicateC
number of entries in the duplicate detection mechanism on the application interface
of the DAN or the interlink of the RedBox for which one single duplicate was received.
Initial value 0.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.21
lreCntMultiA
number of entries in the duplicate detection mechanism on port A for which
more than one duplicate was received. Initial value 0.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.22
lreCntMultiB
number of entries in the duplicate detection mechanism on port B for which
more than one duplicate was received. Initial value 0.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.23
lreCntMultiC
number of entries in the duplicate detection mechanism on the application interface
of the DAN or the interlink of the RedBox for which more than one duplicate was received.
Initial value = 0.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.24
lreCntOwnRxA
number of HSR tagged frames received on Port A that originated from this
device. Frames originate from this device if the source MAC matches the
MAC of the LRE, or if the source MAC appears in the proxy node table (if …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.25
lreCntOwnRxB
number of HSR tagged frames received on Port B that originated from this
device. Frames originate from this device if the source MAC matches the
MAC of the LRE, or if the source MAC appears in the proxy node table (if …
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.1.1.26

lreNodesTable

table
.1.0.62439.2.21.1.1.0.2 · 1 row entry · 5 columns
Open in standard view 
The node table (if it exists on that node) contains information about 
all remote LRE, which advertised themselves through supervision frames
lreNodesEntry entry .1.0.62439.2.21.1.1.0.2.1
Each entry in the node table (if it exists) contains information about
a particular remote LRE registered in the node table, which advertised itself
through supervision frames.
Indexes
lreInterfaceStatsIndex lreNodesIndex
Column Syntax OID
lreNodesIndex
Unique value for each node in the LRE node table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.2.1.1
lreNodesMacAddress
Each MAC address corresponds to a single Doubly Attached Node
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.0.62439.2.21.1.1.0.2.1.2
lreTimeLastSeenA
Time in TimeTicks (1/100s) since the last frame from this remote LRE was
received over LAN A. Initialized with a value of 0 upon node registration
in the node table.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.2.1.3
lreTimeLastSeenB
Time in TimeTicks (1/100s) since the last frame from this remote LRE was
received over LAN B. Initialized with a value of 0 upon node registration
in the node table.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.2.1.4
lreRemNodeType
DAN type, as indicated in the received supervision frame.
Enumeration
Enumerated Values:
0danp
1redboxp
2vdanp
3danh
4redboxh
5vdanh
 .1.0.62439.2.21.1.1.0.2.1.5

lreProxyNodeTable

table
.1.0.62439.2.21.1.1.0.3 · 1 row entry · 2 columns
Open in standard view 
The proxy node table (if implemented) contains information about all 
nodes, for which the LRE acts as a connection to the HSR/PRP network.
lreProxyNodeEntry entry .1.0.62439.2.21.1.1.0.3.1
Each entry in the proxy node table contains information about
a particular node for which the LRE acts as a connection to the HSR or PRP network.
Indexes
lreInterfaceStatsIndex lreProxyNodeIndex
Column Syntax OID
lreProxyNodeIndex
A unique value for each node in the LRE proxy node table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.0.62439.2.21.1.1.0.3.1.1
lreProxyNodeMacAddress
Each entry contains information about a particular node
for which the LRE acts as a proxy for the HSR PRP network.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.0.62439.2.21.1.1.0.3.1.2