lreDupListResideMaxTime
IEC-62439-3-MIB ·
.1.0.62439.2.21.0.1.0.1.1.19
Object
column
r/w
binaryFractionOfSecond SecondFraction
the longest time an entry may reside in the duplicates list, expressed as the number of seconds multiplied by 65536; the default value is 26214 x 15 us, or 400 ms; too low a value can cause broadcast storms
Context
- MIB
- IEC-62439-3-MIB
- OID
.1.0.62439.2.21.0.1.0.1.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Units
- binaryFractionOfSecond
- Parent
- lreInterfaceConfigEntry
- Table
- lreInterfaceConfigTable
- Siblings
- 18
Syntax
binaryFractionOfSecond SecondFraction
- Source
- SecondFraction
- Base type
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lreInterfaceConfigIndex A unique value for each LRE. | column | SNMPv2-SMIUnsigned32 | .1.0.62439.2.21.0.1.0.1.1.1 |
| lreLinkStatusB shows the actual link status of the LRE's port B | column | Enumeration | .1.0.62439.2.21.0.1.0.1.1.10 |
| lreDuplicateDiscard specifies whether a duplicate discard algorithm is used at
reception (Default: discard). | column | Enumeration | .1.0.62439.2.21.0.1.0.1.1.11 |
| lreTransparentReception if removeRCT is configured, the RCT is removed when
forwarding to the upper
layers, only applicable for PRP LRE (Default: removeRCT). | column | Enumeration | .1.0.62439.2.21.0.1.0.1.1.12 |
| lreHsrLREMode This enumeration is only applicable if the LRE is an HSR bridging node or RedBox.
It shows the mode of the HSR LRE:
(1) Default mode: The HSR LRE is in mode h and bridges tagged H… | column | Enumeration | .1.0.62439.2.21.0.1.0.1.1.13 |
| lreSwitchingEndNode This enumeration shows which feature is enabled in this
particular LRE:
(1): an unspecified non-bridging node, e.g. SRP.
(2): an unspecified bridging node, e.g. RSTP.
(3): a PRP n… | column | Enumeration | .1.0.62439.2.21.0.1.0.1.1.14 |
| lreRedBoxIdentity Applicable to RedBox HSR-PRP A and RedBox HSR-PRP B. One ID
is used by
one pair of RedBoxes (one configured to A and one configured to B)
coupling an HSR ring to a PRP network. T… | column | Enumeration | .1.0.62439.2.21.0.1.0.1.1.15 |
| lreEvaluateSupervision True if the LRE evaluates received supervision frames. False if it
drops the supervision frames without evaluating. Note: LREs are required
to send supervision frames, but recepti… | column | SNMPv2-TCTruthValue | .1.0.62439.2.21.0.1.0.1.1.16 |
| lreNodesTableClear specifies that the Node Table is to be cleared | column | Enumeration | .1.0.62439.2.21.0.1.0.1.1.17 |
| lreProxyNodeTableClear specifies that the Proxy Node Table is to be cleared | column | Enumeration | .1.0.62439.2.21.0.1.0.1.1.18 |
| lreRowStatus indicates the status of the LRE table entry | column | SNMPv2-TCRowStatus | .1.0.62439.2.21.0.1.0.1.1.2 |
| lreNodeType specifies the operation mode of the LRE:PRP mode 1(1), HSR mode(2)
Note: PRP mode 0 is considered deprecated and is not supported by this revision
of the MIB | column | Enumeration | .1.0.62439.2.21.0.1.0.1.1.3 |
| lreNodeName specifies this LRE's node name | column | SNMPv2-TCDisplayString | .1.0.62439.2.21.0.1.0.1.1.4 |
| lreVersionName specifies the version of this LRE's software | column | OctetString | .1.0.62439.2.21.0.1.0.1.1.5 |
| lreMacAddress Specified the MAC address to be used by this LRE, MAC addresses are
identical for all ports of a single LRE | column | SNMPv2-TCMacAddress | .1.0.62439.2.21.0.1.0.1.1.6 |
| lrePortAdminStateA Specifies whether the port A shall be active or not Active
through administrative action (Default: active). | column | Enumeration | .1.0.62439.2.21.0.1.0.1.1.7 |
| lrePortAdminStateB Specifies whether the port B shall be active or not Active
through administrative action (Default: active). | column | Enumeration | .1.0.62439.2.21.0.1.0.1.1.8 |
| lreLinkStatusA shows the actual link status of the LRE's port A | column | Enumeration | .1.0.62439.2.21.0.1.0.1.1.9 |