lreRedBoxIdentity

IEC-62439-3-MIB · .1.0.62439.2.21.0.1.0.1.1.15
MIB view Table view

Object

column r/w Enumeration 
Applicable to RedBox HSR-PRP A and RedBox HSR-PRP B. One ID
is used by
one pair of RedBoxes (one configured to A and one configured to B) 
coupling an HSR ring to a PRP network. The integer value states the value 
of the path field a RedBox inserts into each frame it receives from its 
interlink and injects into the HSR ring. When interpreted as binary values, 
the LSB denotes the configuration of the RedBox (A or B), and the following 
3 bits denote the identifier of a RedBox pair.

Context

MIB
IEC-62439-3-MIB
OID
.1.0.62439.2.21.0.1.0.1.1.15
Type
column
Access
readwrite
Status
current
Parent
lreInterfaceConfigEntry
Table
lreInterfaceConfigTable
Siblings
18

Syntax

Enumeration

Values & Constraints

Enumerated Values
2id1a
3id1b
4id2a
5id2b
6id3a
7id3b
8id4a
9id4b
10id5a
11id5b
12id6a
13id6b
14id7a
15id7b

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
lreInterfaceConfigIndex
A unique value for each LRE.
columnSNMPv2-SMIUnsigned32.1.0.62439.2.21.0.1.0.1.1.1
lreLinkStatusB
shows the actual link status of the LRE's port B
columnEnumeration.1.0.62439.2.21.0.1.0.1.1.10
lreDuplicateDiscard
specifies whether a duplicate discard algorithm is used at reception (Default: discard).
columnEnumeration.1.0.62439.2.21.0.1.0.1.1.11
lreTransparentReception
if removeRCT is configured, the RCT is removed when forwarding to the upper layers, only applicable for PRP LRE (Default: removeRCT).
columnEnumeration.1.0.62439.2.21.0.1.0.1.1.12
lreHsrLREMode
This enumeration is only applicable if the LRE is an HSR bridging node or RedBox. It shows the mode of the HSR LRE: (1) Default mode: The HSR LRE is in mode h and bridges tagged H…
columnEnumeration.1.0.62439.2.21.0.1.0.1.1.13
lreSwitchingEndNode
This enumeration shows which feature is enabled in this particular LRE: (1): an unspecified non-bridging node, e.g. SRP. (2): an unspecified bridging node, e.g. RSTP. (3): a PRP n…
columnEnumeration.1.0.62439.2.21.0.1.0.1.1.14
lreEvaluateSupervision
True if the LRE evaluates received supervision frames. False if it drops the supervision frames without evaluating. Note: LREs are required to send supervision frames, but recepti…
columnSNMPv2-TCTruthValue.1.0.62439.2.21.0.1.0.1.1.16
lreNodesTableClear
specifies that the Node Table is to be cleared
columnEnumeration.1.0.62439.2.21.0.1.0.1.1.17
lreProxyNodeTableClear
specifies that the Proxy Node Table is to be cleared
columnEnumeration.1.0.62439.2.21.0.1.0.1.1.18
lreDupListResideMaxTime
the longest time an entry may reside in the duplicates list, expressed as the number of seconds multiplied by 65536; the default value is 26214 x 15 us, or 400 ms; too low a valu…
columnbinaryFractionOfSecond SecondFraction.1.0.62439.2.21.0.1.0.1.1.19
lreRowStatus
indicates the status of the LRE table entry
columnSNMPv2-TCRowStatus.1.0.62439.2.21.0.1.0.1.1.2
lreNodeType
specifies the operation mode of the LRE:PRP mode 1(1), HSR mode(2) Note: PRP mode 0 is considered deprecated and is not supported by this revision of the MIB
columnEnumeration.1.0.62439.2.21.0.1.0.1.1.3
lreNodeName
specifies this LRE's node name
columnSNMPv2-TCDisplayString.1.0.62439.2.21.0.1.0.1.1.4
lreVersionName
specifies the version of this LRE's software
columnOctetString.1.0.62439.2.21.0.1.0.1.1.5
lreMacAddress
Specified the MAC address to be used by this LRE, MAC addresses are identical for all ports of a single LRE
columnSNMPv2-TCMacAddress.1.0.62439.2.21.0.1.0.1.1.6
lrePortAdminStateA
Specifies whether the port A shall be active or not Active through administrative action (Default: active).
columnEnumeration.1.0.62439.2.21.0.1.0.1.1.7
lrePortAdminStateB
Specifies whether the port B shall be active or not Active through administrative action (Default: active).
columnEnumeration.1.0.62439.2.21.0.1.0.1.1.8
lreLinkStatusA
shows the actual link status of the LRE's port A
columnEnumeration.1.0.62439.2.21.0.1.0.1.1.9