HUAWEI-SNMP-NOTIFICATION-MIB Table View

Alarm reporting control table. It is used to control 
by alarm ID whether to report the trap generated 
corresponding to an alarm to the trap host.

hwAlarmSendEntry row .1.3.6.1.4.1.2011.6.30.1.7.1

Alarm reporting control table. It is used to control
by alarm ID whether to report the trap generated
corresponding to an alarm to the trap host.
The index of this entry is object hwAlarmIndex.

Indexes

hwAlarmIndex

Column	Syntax	OID
hwAlarmIndex Index of the alarm reporting control table. The index value is the alarm ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.1.7.1.1
hwAlarmSendSwitch Control function of whether to report the trap generated corresponding to an alarm to the trap host. Options: 1. on(1) -indicates that the trap generated corresponding to the alarm of object hwAlarmIndex …	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.2011.6.30.1.7.1.2

Currently, the table is not supported.

hwMaintainSendEntry row .1.3.6.1.4.1.2011.6.30.1.8.1

Currently, the table is not supported.
The index of this entry is hwMaintainIndex.

Indexes

hwMaintainIndex

Column	Syntax	OID
hwMaintainIndexobsolete Currently, the object is not supported.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.1.8.1.1
hwMaintainSendSwitchobsolete Currently, the object is not supported. Options: 1.on(1) -on. 2.off(2)-off.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.2011.6.30.1.8.1.2

RTU ConfigID table. 
Currently, the object is not supported.

hwRtuConfigIDEntry row .1.3.6.1.4.1.2011.6.30.3.11.1

RTU ConfigID table.The index of this entry is ifIndex.
Currently, the object is not supported.

Indexes

IF-MIBifIndex

Column	Syntax	OID
hwRtuConfigID The ConfigID of RTU. Currently, the object is not supported.	OctetStringr/w Constraints: range: 16-16	.1.3.6.1.4.1.2011.6.30.3.11.1.1

Function of querying the alarm statistical information. 
It is used to query the count of the alarm occurring in the statistical period.

hwAlarmStatInfoEntry row .1.3.6.1.4.1.2011.6.30.4.6.1

Function of querying the alarm statistical information.
It is used to query the count of the alarm occurring in the statistical period.
The index of this entry is hwAlarmStatID. It is used to specify the alarm whose
…

Indexes

hwAlarmStatID

Column	Syntax	OID
hwAlarmStatIDobsolete Index of operation table hwAlarmStatInfoTable. It is used to indicate the ID of the alarm to be queried.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.4.6.1.1
hwAlarmStatCurrentNumobsolete Query the count of the alarm occurring in the current statistical period by index.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.30.4.6.1.2
hwAlarmStatLastNumobsolete Query the count of the alarm occurring in the previous statistical period by index.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.30.4.6.1.3

Levels of the all the logs supported by the current syslog.

hwSyslogOutputEntry row .1.3.6.1.4.1.2011.6.30.5.1.1

Levels of the all the logs supported by the current syslog.
The index of this entry is hwSyslogLevelIndex. hwSyslogLevelIndex is used to
describe of the level of the output syslog information.

Indexes

hwSyslogLevelIndex

Column	Syntax	OID
hwSyslogLevelIndex Description of the level of the output syslog information. Currently, the syslog supports eight data types. Options: 1. emergency(1) -indicates that system is unusable. 2. alert(2) -indicates that action m…	Enumeration Enumerated Values: 1 emergency 2 alert 3 critical 4 error 5 warning 6 notice 7 informational 8 debug	.1.3.6.1.4.1.2011.6.30.5.1.1.1
hwSyslogOutputOperStatus The output status of the syslog information. Options: 1. unoutput(1) -indicates that the syslog information is not output to the local PC or server. 2. output(2) -indicates that the syslog information is output to th…	Enumerationr/w Enumerated Values: 1 unoutput 2 output	.1.3.6.1.4.1.2011.6.30.5.1.1.2

Log facility of the current syslog.  
The index of this entry is hwSyslogLogType. hwSyslogLogType is used to 
describe the type of the syslog.

hwSysloglogFacilityEntry row .1.3.6.1.4.1.2011.6.30.5.4.1

Log facility of the current syslog.
The index of this entry is hwSyslogLogType. hwSyslogLogType is used to
describe the type of the syslog.

Indexes

hwSyslogLogType

Column	Syntax	OID
hwSyslogLogType Description of the type of the output syslog information. Options: 1. log(1) -indicates that the syslog type is log. 2. alarmEvent(2) -indicates that the syslog type is alarm-event. 3. igmp(3) -indicate…	Enumeration Enumerated Values: 1 log 2 alarmEvent 3 igmp 4 voip 5 security 6 ssa	.1.3.6.1.4.1.2011.6.30.5.4.1.1
hwSyslogLogFacility Description of the facility of the output syslog information. Options: 1. local0(1) -indicates that the syslog facility is local0. 2. local1(2) -indicates that the syslog facility is local1. 3. local2(3) …	Enumerationr/w Enumerated Values: 1 local0 2 local1 3 local2 4 local3 5 local4 6 local5 7 local6 8 local7 9 default	.1.3.6.1.4.1.2011.6.30.5.4.1.2
hwSyslogLogSeverity Description of the severity of the output syslog information. Options: 1. emergency(1) -indicates that system is unusable. 2. alert(2) -indicates that action must be taken immediately. 3. critical(3) -i…	Enumerationr/w Enumerated Values: 1 emergency 2 alert 3 critical 4 error 5 warning 6 notice 7 informational 8 debug 9 default	.1.3.6.1.4.1.2011.6.30.5.4.1.3

Event control table. It is used to set the event level through
the NMS or query the event list supported in the system. 
The information that can be queried includes the event ID, event name, 
event class, event type, event level, event default level, 
count of the event in the statistical period, count of the event in 
the previous statistical period and event management status.

hwEventCtrlEntry row .1.3.6.1.4.1.2011.6.30.6.1.1

Event control table. It is used to set the event level through
the NMS or query the event list supported in the system.
The information that can be queried includes the event ID, event name,
event class, event type, e…

Indexes

hwEventID

Column	Syntax	OID
hwEventID Index object of the event control table. The index value is the event ID and the information about the event control table is obtained according to the current event ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.6.1.1.1
hwEventName Event name. It is used to briefly describe the event trigged by the system.	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.2011.6.30.6.1.1.2
hwEventClass Event class. Currently, the system supports two event classes: Options: 1. running(1) -indicates the running event, such as the prompt displayed during the loading process. 2. security(2) -indicates…	Enumeration Enumerated Values: 1 running 2 security	.1.3.6.1.4.1.2011.6.30.6.1.1.3
hwEventLevel Reference the description of SeverityLevel.	SeverityLevelr/w Type Values: 1 critical 2 major 3 minor 4 warning 5 cleared 6 indeterminate 7 informational 8 reliable 9 notalarmed 10 notreported	.1.3.6.1.4.1.2011.6.30.6.1.1.4
hwEventDefaultLevel Reference the description of SeverityLevel.	SeverityLevel Type Values: 1 critical 2 major 3 minor 4 warning 5 cleared 6 indeterminate 7 informational 8 reliable 9 notalarmed 10 notreported	.1.3.6.1.4.1.2011.6.30.6.1.1.5
hwEventType Event type. Currently, the system supports five event types. Options: 1. communication(1) -indicates the communication event. 2. service(2) -indicates the …	EventType Type Values: 1 communication 2 servicequality 3 processerror 4 equipment 5 environmental	.1.3.6.1.4.1.2011.6.30.6.1.1.6
hwEventStatCurrNum Count of the event occurring in the current period.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.30.6.1.1.7
hwEventStatPrevNum Count of the event occurring in the previous period.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.30.6.1.1.8
hwEventAdminStatus Event management status. Currently, the system supports two states. Options: 1. init(1) -During the setting operation, you can change only the event that is in the initial state to the alarm but …	Enumerationr/w Enumerated Values: 1 init 2 conversion	.1.3.6.1.4.1.2011.6.30.6.1.1.9
hwEventConditionEffect Event Effect. It is used to describe the Service effect of the event and is classified into two types. Options: 1. standingcondition(1) -indicates a condition is standing. 2. transientcondition(2) -ind…	Enumeration Enumerated Values: 1 standingcondition 2 transientcondition	.1.3.6.1.4.1.2011.6.30.6.1.1.10

Alarm control table. It is used to set the alarm level through the NMS or 
query the alarm list supported in the system. The information that can be queried
includes the alarm ID, alarm name, alarm class, alarm type, alarm level, alarm default 
level, count of the alarm in the statistical period, count of the alarm in the previous 
statistical period and alarm management status.

hwAlarmCtrlEntry row .1.3.6.1.4.1.2011.6.30.7.1.1

Alarm control table. It is used to set the alarm level through the NMS or
query the alarm list supported in the system. The information that can be queried
includes the alarm ID, alarm name, alarm class, alarm type, al…

Indexes

hwAlarmID

Column	Syntax	OID
hwAlarmID Index object of the alarm control table. The index value is the alarm ID and the information about the alarm control table is obtained according to the current alarm ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.7.1.1.1
hwAlarmName Alarm name. It is used to briefly describe the alarm triggered by the system.	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.2011.6.30.7.1.1.2
hwAlarmClass Alarm class. Currently, the system supports two alarm classes. Options: 1. faultalarm(1) -indicates the fault alarm. 2. restorealarm(2) -indicates the restore al…	Enumeration Enumerated Values: 1 faultalarm 2 restorealarm	.1.3.6.1.4.1.2011.6.30.7.1.1.3
hwAlarmLevel Reference the description of SeverityLevel.	SeverityLevelr/w Type Values: 1 critical 2 major 3 minor 4 warning 5 cleared 6 indeterminate 7 informational 8 reliable 9 notalarmed 10 notreported	.1.3.6.1.4.1.2011.6.30.7.1.1.4
hwAlarmDefaultLevel Reference the description of SeverityLevel.	SeverityLevel Type Values: 1 critical 2 major 3 minor 4 warning 5 cleared 6 indeterminate 7 informational 8 reliable 9 notalarmed 10 notreported	.1.3.6.1.4.1.2011.6.30.7.1.1.5
hwAlarmType Alarm type. It is used to describe the major cause of the alarm and is classified into five types. Options: 1. communication(1) -indicates the communication alarm. 2. service(2) -indicates the…	EventType Type Values: 1 communication 2 servicequality 3 processerror 4 equipment 5 environmental	.1.3.6.1.4.1.2011.6.30.7.1.1.6
hwAlarmStatCurrNum Count of the alarm occurring in the current period.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.30.7.1.1.7
hwAlarmStatPrevNum Count of the alarm occurring in the previous period.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.6.30.7.1.1.8
hwAlarmAdminStatus Alarm management status. Options: 1. init(1) -The default status is init(1). 2. conversion(2) -If an alarm needs to be converted into an event, perform the setting operation to set the manageme…	Enumerationr/w Enumerated Values: 1 init 2 conversion	.1.3.6.1.4.1.2011.6.30.7.1.1.9
hwAlarmServiceEffect Alarm Service effect status. It is used to describe the Service effect of the alarm and is classified into two types. Options: 1. nonserviceaffect(1) -indicates the alarm is a non-service affecting condition. 2. servi…	Enumerationr/w Enumerated Values: 1 nonserviceaffect 2 serviceaffect	.1.3.6.1.4.1.2011.6.30.7.1.1.10

Alarm clear table. It is used to clear the active alarm by 
specified serial number through the NMS. The alarm refers to 
the alarm whose recovery alarm is not generated.

hwAlarmRecordClearEntry row .1.3.6.1.4.1.2011.6.30.8.1.1

Alarm clear table. It is used to clear the active alarm by
specified serial number through the NMS. The alarm refers to
the alarm whose recovery alarm is not generated.
The index of this entry is hw…

Indexes

hwAlarmRecordSn

Column	Syntax	OID
hwAlarmRecordSn Index of the alarm or event that is not recovered and to be cleared. The index value is the serial number of the alarm or event. The serial number is saved on the NMS and can be issued through the NMS.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.8.1.1.1
hwAlarmRecordAdminStatus Recorded management status of the alarm. Options: 1. clear(1) -indicates that the fault alarm is cleared. 2. exist(2) -indicates that the fault alarm exists.	Enumerationr/w Enumerated Values: 1 clear 2 exist	.1.3.6.1.4.1.2011.6.30.8.1.1.2

Filter table of the alarm, event and trap. 
It is used to set the filter condition of 
the alarm, event and trap through the NMS.

hwNotifyFilterEntry row .1.3.6.1.4.1.2011.6.30.9.1.1

Filter table of the alarm, event and trap.
It is used to set the filter condition of
the alarm, event and trap through the NMS.
The indexes of this entry are hwNotifyFilterObject,
hwNotifyFilterType and …

Indexes

hwNotifyFilterObject hwNotifyFilterType hwNotifyFilterCondition

Column	Syntax	OID
hwNotifyFilterObject Description of all the filter objects supported by hwNotifyFilterTable. Options: 1. event(1) -indicates that the object to be filtered is the event. 2. alarm(2) -indica…	Enumeration Enumerated Values: 1 event 2 alarm 3 maintain 4 snmpstd 5 topo 6 test 15 datachange	.1.3.6.1.4.1.2011.6.30.9.1.1.1
hwNotifyFilterType Description of the filter type. Currently, the system supports five filter types. Options: 1. system(1) -indicates that the object is filtered by network element (NE). 2. level(2) -indicates that the object is …	Enumeration Enumerated Values: 1 system 2 level 3 type 4 id 5 parameter	.1.3.6.1.4.1.2011.6.30.9.1.1.2
hwNotifyFilterCondition Detailed condition of filtering the alarm. The range is determined by different alarm types as follows: When the type of the object to be filtered is system(1), hwNotifyFilterCondition can be any va…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.9.1.1.3
hwNotifyFilterRowStatus The status of this conceptual row. createAndGo(4) is supplied to create a new instance of a conceptual row. destroy(6) is supplied to delete the instances associated with an existing conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.30.9.1.1.4

Alarm shielding table. It is used to set the condition of shielding the alarm.

hwNotifySubEntry row .1.3.6.1.4.1.2011.6.30.9.11.1

Alarm shielding table. It is used to set the condition of shielding the alarm.
The index of this entry is hwNotifySubHostAddress, which is the IP address of
a trap host whose alarm is shielded.

Indexes

hwNotifySubHostAddress

Column	Syntax	OID
hwNotifySubHostAddressobsolete IP address of the target host for which all the traps generated for the alarms are shielded.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.30.9.11.1.1
hwNotifySubAdminStatusobsolete Status of alarm shielding. Only two states are supported, namely, received and shielded. Options: 1. enable(1) -indicates that the alarm is received. 2. disable(2) -indicates that the alar…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.2011.6.30.9.11.1.2
hwNotifySubContentListobsolete ID list of the alarm or event to be shielded. It is all or the ID list (the IDs are separated with comma). All indicates all the alarms or events.	OctetStringr/w	.1.3.6.1.4.1.2011.6.30.9.11.1.3

Filter extended table of the alarm, event and trap. 
It is used to set the filter condition of 
the alarm, event and trap through the NMS.

hwNotifyFilterExtEntry row .1.3.6.1.4.1.2011.6.30.9.12.1

Filter extended table of the alarm, event and trap.
It is used to set the filter condition of
the alarm, event and trap through the NMS.
The indexes of this entry are hwNotifyFilterExtObject,
hwNotifyFil…

Indexes

hwNotifyFilterExtObject hwNotifyFilterExtType hwNotifyFilterExtCondition

Column	Syntax	OID
hwNotifyFilterExtObject Description of all the filter objects supported by hwNotifyFilterExtTable. Options: 1. event(1) -indicates that the object to be filtered is the event. 2. alarm(2) -ind…	Enumeration Enumerated Values: 1 event 2 alarm 3 maintain 4 snmpstd 5 topo 6 test 15 datachange	.1.3.6.1.4.1.2011.6.30.9.12.1.1
hwNotifyFilterExtType Description of the filter type. Currently, the system supports five filter types. Options: 1. system(1) -indicates that the object is filtered by network element (NE). 2. level(2) -indicates that the object is …	Enumeration Enumerated Values: 1 system 2 level 3 type 4 id 5 parameter	.1.3.6.1.4.1.2011.6.30.9.12.1.2
hwNotifyFilterExtCondition Detailed condition of filtering the alarm. It used 1-7 byte to describe the value, and every byte is issued as a decimal numeral. The range is determined by different alarm types as follows: When the …	OctetString Constraints: range: 1-8	.1.3.6.1.4.1.2011.6.30.9.12.1.3
hwNotifyFilterExtRowStatus The status of this conceptual row. createAndGo(4) is supplied to create a new instance of a conceptual row. destroy(6) is supplied to delete the instances associated with an existing conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.30.9.12.1.4

Trap synchronization table. The trap synchronization function 
is used to send the trap buffered in the system to the trap 
host in a file or in the synchronization mode.

hwTrapSynEntry row .1.3.6.1.4.1.2011.6.30.11.1.1

Trap synchronization table. The trap synchronization function
is used to send the trap buffered in the system to the trap
host in a file or in the synchronization mode.
The index of this entry is hwTrapSynType, indic…

Indexes

hwTrapSynType

Column	Syntax	OID
hwTrapSynType Trap synchronization types. Options: 1. trap(1) -indicates that all the traps are synchronized. 2. alarm(2) -indicates that only the alarm trap is synchronized. 3. alarmSub(3) -indicates that the alarm trap is…	Enumeration Enumerated Values: 1 trap 2 alarm 3 alarmSub	.1.3.6.1.4.1.2011.6.30.11.1.1.1
hwTrapBufferMinSn Minimum serial number of the trap in the trap buffer area.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.11.1.1.2
hwTrapBufferMaxSn Maximum serial number of the trap in the trap buffer area.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.11.1.1.3
hwTrapSynBeginSn Starting serial number of the trap that is synchronized. The value is the serial number of the trap in the trap buffer area and can be obtained through hwTrapBufferMinSn and hwTrapBufferMaxSn. The hwTrapSyn…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.11.1.1.4
hwTrapSynEndSn Ending serial number of trap that is synchronized. The value is the serial number of the trap in the trap buffer area and can be obtained through hwTrapBufferMinSn and hwTrapBufferMaxSn. The hwTrapSynEndSn value of -…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.11.1.1.5
hwTrapSynAdminStatus Trap synchronization management status. Options: 1. other(1) -other. 2. stop(2) -stop. 3. interval(3) -indicates the traps with the serial numbe…	Enumerationr/w Enumerated Values: 1 other 2 stop 3 interval 4 all 5 intervalsynfile 6 allsynfile	.1.3.6.1.4.1.2011.6.30.11.1.1.6

Alarm output control table. 
It is used to query and configure whether the alarm signal 
is output through the external alarm interface.

hwAlarmExpCtrlEntry row .1.3.6.1.4.1.2011.6.30.12.1.1

Alarm output control table.
It is used to query and configure whether the alarm signal
is output through the external alarm interface.
The index of this entry is hwAlarmEx…

Indexes

hwAlarmExpID

Column	Syntax	OID
hwAlarmExpID Index of hwAlarmExpCtrlTable. It is used to configure whether a specified alarm is output. In the configuration, the fault alarms refer to all the fault alarms with level higher than warning in the system.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.12.1.1.1
hwAlarmExpSign Flag that indicates whether the alarm is output through the external alarm interface. The values are as follows: Options: 1. disable(1) -indicates that the alarm is not output through the external a…	Enumerationr/w Enumerated Values: 1 disable 2 enable	.1.3.6.1.4.1.2011.6.30.12.1.1.2

Log synchronization table. It is used to query the minimum and maximum serial numbers of 
the logs that can be synchronized and set the condition of synchronizing the log.

hwLogSynEntry row .1.3.6.1.4.1.2011.6.30.13.1.1

Log synchronization table. It is used to query the minimum and maximum serial numbers of
the logs that can be synchronized and set the condition of synchronizing the log.
The index of this entry is hwLogSynType. The…

Indexes

hwLogSynType

Column	Syntax	OID
hwLogSynType Type of the log that is synchronized. Currently, the logs are classified into two types. Options: 1. operating(1) -indicates the operating log. 2. securit…	Enumeration Enumerated Values: 1 operating 2 security	.1.3.6.1.4.1.2011.6.30.13.1.1.1
hwLogMinSn Minimum serial number of the log that can be synchronized currently.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.13.1.1.2
hwLogMaxSn Maximum serial number of the log that can be synchronized currently.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.13.1.1.3
hwLogSynBeginSn Starting index of the log that is synchronized. The value ranges from hwLogMinSn to hwLogMaxSn. The hwLogSynBeginSn value of -1 indicates there is no log synchronizing.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.13.1.1.4
hwLogSynEndSn Ending index of the log that is synchronized. The value ranges from hwLogMinSn to hwLogMaxSn and must be larger than hwLogSynBeginSn. The hwLogSynEndSn value of -1 indicates there is no log synchronizing.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.13.1.1.5
hwLogSynAdminStatus The synchronizing administration. Options: 1.nosynmode(-1)-indicates the default status in the system. 2.interval(3) -indicates that the host should send all the log between hwLogSynBeginSn and hwLogSynEn…	Enumerationr/w Enumerated Values: -1 nosynmode 3 interval 4 all	.1.3.6.1.4.1.2011.6.30.13.1.1.6

Syslog host table. It is used to set attribute of syslog host in the current system.

hwSyslogHostEntry row .1.3.6.1.4.1.2011.6.30.14.2.1

Syslog host table. It is used to set attribute of syslog host in the current system.
The index of this table is hwSyslogHostName.

Indexes

hwSyslogHostName

Column	Syntax	OID
hwSyslogHostName Syslog host name,a kind of string parameter. Index of hwSyslogHostTable.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.6.30.14.2.1.1
hwSyslogHostInetAddressType Obtained version of internet address. Options: 1. ipv4(1) -indicates that the internet address version is IPv4. 2. ipv6(2) -indicates that the internet address version is IPv6.	Enumerationr/w Enumerated Values: 1 ipv4 2 ipv6	.1.3.6.1.4.1.2011.6.30.14.2.1.2
hwSyslogHostInetAddress IP address of the syslog host.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.2011.6.30.14.2.1.3
hwSyslogHostFacility List of the syslog host facility. Through this object, the syslog host facility can be configured in batches in the format of bit-domain string. The syslog host facility hwSyslogHostFacility is of the bit type. The v…	Bitsr/w Enumerated Values: 16 local0 17 local1 18 local2 19 local3 20 local4 21 local5 22 local6 23 local7	.1.3.6.1.4.1.2011.6.30.14.2.1.4
hwSyslogHostRowStatus The status of this conceptual row. active(1) indicates that the log host is set to the activated state. notInservice(2) indicates that the log host is set to the deactivated state. createandgo(4) indicates that the…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.30.14.2.1.5
hwSyslogHostSeverity This object indicates the list of severities of logs received by the syslog host. This object helps set the severities of logs received by the syslog host in batches in the format of bit-domain character string. The s…	Bitsr/w Enumerated Values: 0 emergency 1 alert 2 critical 3 error 4 warning 5 notice 6 informational 7 debug	.1.3.6.1.4.1.2011.6.30.14.2.1.6
hwSyslogHostTransType Obtained version of internet address. Options: 1. tcp(1) -indicates that the transport mode is TCP. 2. udp(2) -indicates that the transport mode is UDP.	Enumerationr/w Enumerated Values: 1 tcp 2 udp	.1.3.6.1.4.1.2011.6.30.14.2.1.7
hwSyslogHostSslPolicyName SSL policy name,a kind of string parameter.	OctetStringr/w Constraints: range: 0-23	.1.3.6.1.4.1.2011.6.30.14.2.1.8

Alarm or event cause querying table. It is used to query the cause 
description of the alarm or event by alarm or event ID.

hwNotificationCauseEntry row .1.3.6.1.4.1.2011.6.30.15.1.1

Alarm or event cause querying table. It is used to query the cause
description of the alarm or event by alarm or event ID.
The index of this entry is hwNotificationCa…

Indexes

hwNotificationCauseID

Column	Syntax	OID
hwNotificationCauseID The index of hwNotificationCauseTable. The value is the alarm or event ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.15.1.1.1
hwNotificationCauseDesc Cause description of the alarm or event.	OctetString	.1.3.6.1.4.1.2011.6.30.15.1.1.2

Trap reliablity table. It is used to set the reliable trap through the NMS.

hwTrapReliabilityConfEntry row .1.3.6.1.4.1.2011.6.30.19.1.1

Trap reliablity table. It is used to set the reliable trap through the NMS.
The indexes of this entry are hwTrapReliabilityTrapType and hwTrapReliabilityTrapID.

Indexes

hwTrapReliabilityTrapType hwTrapReliabilityTrapID

Column	Syntax	OID
hwTrapReliabilityTrapType Reliable trap types. Options: 1. maintain(3) -indicates the maintenance trap. 2. snmpstd(4) -indicates the standard trap. 3. topo(5) -indicates the topological trap. 4. test(6) -indicates the test tr…	Enumeration Enumerated Values: 3 maintain 4 snmpstd 5 topo 6 test 15 datachange	.1.3.6.1.4.1.2011.6.30.19.1.1.1
hwTrapReliabilityTrapID Reliable trap ID, the range is 0-0xffffffff.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.6.30.19.1.1.2
hwTrapReliabilityConfRowStatus The status of this conceptual row. createAndGo(4) is supplied to create a new instance of a conceptual row. destroy(6) is supplied to delete the instances associated with an existing conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.6.30.19.1.1.3