HUAWEI-RRPP-MIB Table View

A table containing information about configurations
and status of a RRPP domain.

hwRrppDomainEntry row .1.3.6.1.4.1.2011.5.25.113.2.1.1

Detailed information of a specified RRPP domain.

Indexes

hwRrppDomainID

Column	Syntax	OID
hwRrppDomainID An index uniquely identifies a RRPP domain. This value can't be modified after created.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.113.2.1.1.1
hwRrppDomainControlVlanID Index of the control VLAN specified to a domain. The value 65535 indicates the control VLAN has not been configured. The VLAN assigned to a RRPP Domain must not have been created. This value can't be modified after c…	Integer32r/w Constraints: range: 1-4093 range: 65535-65535	.1.3.6.1.4.1.2011.5.25.113.2.1.1.2
hwRrppDomainHelloTime The value indicates the interval between two hello packets sent by master-node, and its unit is second. The value ranges from 1s~10s.	Integer32r/w Constraints: range: 1-10	.1.3.6.1.4.1.2011.5.25.113.2.1.1.3
hwRrppDomainFailTime The expiration value of the fail-period timer and its unit is second. If not receiving hello packets before this expires, the master-node considers the ring is broken. The value of this node ranges with products, which…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.113.2.1.1.4
hwRrppDomainRowStatus This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.113.2.1.1.5
hwRrppDomainResetStatistics Clears the statistics of packets received and sent on the current domain.	Enumerationr/w Enumerated Values: 1 cleared 2 unused	.1.3.6.1.4.1.2011.5.25.113.2.1.1.6
hwRrppMulSubRingProtection Indicating whether the rrpp mul-sub-ring protection is enabled on this switch.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.113.2.1.1.7
hwRrppDomainProtectedVlan Information of instance index protected by a domain. The instance index ranging from 0 to 48 is listed in a character string in order. The value of each character can be either 0 or 1. Character 0 indicates that the …	OctetStringr/w Constraints: range: 0-49	.1.3.6.1.4.1.2011.5.25.113.2.1.1.8
hwRrppDomainDescription A textual description of the RRPP domain. It is mandatory that this only contain no more than 255 printable ASCII characters.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.2011.5.25.113.2.1.1.9
hwRrppDomainProtectedInstance Information of instance index protected by a domain.	OctetStringr/w Constraints: range: 0-512	.1.3.6.1.4.1.2011.5.25.113.2.1.1.10

A table containing information about configurations
and status of a RRPP Ring.

hwRrppRingEntry row .1.3.6.1.4.1.2011.5.25.113.2.2.1

Detailed information of a specified RRPP Ring.

Indexes

hwRrppDomainID hwRrppRingID

Column	Syntax	OID
hwRrppRingID An index uniquely identifies a RRPP Ring. This value can't be modified after created.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.113.2.2.1.1
hwRrppRingEnableStatus Indicating whether the RRPP is enabled on this Ring. NOTE: If major-ring and sub-ring(s) of a domain coexist on a switch, major-ring must be enabled before sub-ring is enabled. And sub-ring must be disabled before m…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.113.2.2.1.2
hwRrppRingActive As both hwRrppEnableStatus and hwRrppRingEnableStatus are enabled, the ring is activated. Whereas either of the two items is disabled, the ring is inactive.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.2011.5.25.113.2.2.1.3
hwRrppRingState The status (i.e. unknown, health or fault) of the Ethernet ring.	Enumeration Enumerated Values: 1 unknown 2 health 3 fault 4 complete 5 failed 6 linkup 7 linkdown 8 preforwarding 9 linkupnotify 10 linkdownnotify 11 preforwardnotify	.1.3.6.1.4.1.2011.5.25.113.2.2.1.4
hwRrppRingNodeMode There are four RRPP node modes for the switch on a RRPP ring, such as master, transit, edge and assistant-edge. Each RRPP ring has a single designated master-node. All other nodes except edge-node and assistant-edge-n…	Enumerationr/w Enumerated Values: 1 master 2 transit 3 edge 4 assistantEdge	.1.3.6.1.4.1.2011.5.25.113.2.2.1.5
hwRrppRingPrimaryPort If the switch is a master-node or transit-node, this value is ifIndex of the primary port; otherwise, if the switch is an edge-node or assistant-edge-node, this value is ifIndex of the common port. This value is 0, if …	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.113.2.2.1.6
hwRrppRingSecondaryPort If the switch is a master-node or transit-node, this value is ifIndex of the secondary port; otherwise, if the switch is an edge-node or assistant-edge-node, this value is ifIndex of the edge port. This value is 0, if t…	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.113.2.2.1.7
hwRrppRingLevel Level of a ring. This field should be set 0 on major-ring and 1 on the sub-ring. This value can't be modified after created.	Enumerationr/w Enumerated Values: 0 majorRing 1 subRing	.1.3.6.1.4.1.2011.5.25.113.2.2.1.8
hwRrppRingRowStatus This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hwRrppRingNodeMode, hwRrppRingPrimaryPort, hwR…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.113.2.2.1.9
hwRrppRingResetStatistics Clears the statistics of packets received and sent on the current ring.	Enumerationr/w Enumerated Values: 1 cleared 2 unused	.1.3.6.1.4.1.2011.5.25.113.2.2.1.10

A table containing information about configurations and
status of a RRPP port.

hwRrppPortEntry row .1.3.6.1.4.1.2011.5.25.113.2.3.1

Detailed information of a specified RRPP port.

Indexes

hwRrppDomainID hwRrppRingID hwRrppPortID

Column	Syntax	OID
hwRrppPortID Logical index of the interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.113.2.3.1.1
hwRrppPortType The interface type of the RRPP port. (i.e. FE, GE, VE, Eth-Trunk, XGE and etc).	Enumeration Enumerated Values: 1 fe 2 ge 3 ve 4 ethtrunk 5 xge 6 x40ge 7 x100ge 8 multige	.1.3.6.1.4.1.2011.5.25.113.2.3.1.2
hwRrppPortRole The RRPP role of the port. (i.e. primary, secondary, common or edge port).	Enumeration Enumerated Values: 1 primary 2 secondary 3 common 4 edge	.1.3.6.1.4.1.2011.5.25.113.2.3.1.3
hwRrppPortState State of RRPP port, including unknown, unblocked, blocked and down.	Enumeration Enumerated Values: 1 unknown 2 unblocked 3 blocked 4 down	.1.3.6.1.4.1.2011.5.25.113.2.3.1.4
hwRrppPortRXError The statistics of illegal RRPP packets received from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.5
hwRrppPortRXHello The statistics of hello packets received from this port on specified ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.6
hwRrppPortRXLinkUp The statistics of link-up packets received from this port on specified ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.7
hwRrppPortRXLinkDown The statistics of link-down packets received from this port on specified ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.8
hwRrppPortRXCommonFlush The statistics of common-flush packets received from this port on specified ring. Instruction When master-node receives valid link-down packets or link-up packets, it will send common-flush packets, instructing the oth…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.9
hwRrppPortRXCompleteFlush The statistics of complete-flush packets received from this port on specified ring. Instruction When the ring recovers, master-node will receive its own hello packets. It will send complete-flush packets, instructing …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.10
hwRrppPortRXEdgeHello The statistics of edge-hello packets received from this port on specified ring. Instruction When edge-node sends edge-hello packets, assistantEdge-node will receive its own edge-hello packets from the common link and t…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.11
hwRrppPortRXMajorFault The statistics of major-fault packets received from this port on specified ring. Instruction When assistantEdge can't receive edge-hello packets in the specified fault-time, assistantEdge-node will send its own major-f…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.12
hwRrppPortTXError The statistics of RRPP packets failed to send out of this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.13
hwRrppPortTXHello The statistics of hello packets sent from this port on specified ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.14
hwRrppPortTXLinkUp The statistics of link-up packets sent from this port on specified ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.15
hwRrppPortTXLinkDown The statistics of link-down packets sent from this port on specified ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.16
hwRrppPortTXCommonFlush The statistics of common-flush packets sent from this port on specified ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.17
hwRrppPortTXCompleteFlush The statistics of complete-flush packets sent from this port on specified ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.18
hwRrppPortTXEdgeHello The statistics of edge-hello packets sent from this port on specified ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.19
hwRrppPortTXMajorFault The statistics of major-fault packets sent from this port on specified ring.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.2.3.1.20

A table containing information about tracking port.

hwRrppTrackInterfaceEntry row .1.3.6.1.4.1.2011.5.25.113.2.4.1

Detailed information of a specified RRPP track interface.

Indexes

hwRrppDomainID hwRrppRingID hwRrppTrackInterfaceID

Column	Syntax	OID
hwRrppTrackInterfaceID Logical index of track interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.113.2.4.1.1
hwRrppTrackRowStatus This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.113.2.4.1.2

A table containing information about an RRPP ring group and created without the domain or ring.

hwRrppRingGroupEntry row .1.3.6.1.4.1.2011.5.25.113.2.5.1

Detailed information about a specified RRPP ring group.

Indexes

hwRrppRingGroupID

Column	Syntax	OID
hwRrppRingGroupID index of the RRPP ring group. This value can't be modified after created.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.113.2.5.1.1
hwRrppRingGroupRowStatus Row status in the ring group configuration table. hwRrppRingGroupID must be specified to create a row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.113.2.5.1.2

A table containing information about the configurations and status of an RRPP ring.

hwRrppRingGroupMemberEntry row .1.3.6.1.4.1.2011.5.25.113.2.6.1

Detailed information about a specified RRPP ring group.

Indexes

hwRrppRingGroupID hwRrppRingGroupMemberDomainID hwRrppRingGroupMemberRingID

Column	Syntax	OID
hwRrppRingGroupMemberDomainID Index, namely, domain ID of the members of a ring group. This value cannot be modified after created.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.113.2.6.1.1
hwRrppRingGroupMemberRingID Index, namely, ring ID of the members of a ring group. This value cannot be modified after created.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.25.113.2.6.1.2
hwRrppRingGroupIsEdgeHelloProcess Flag carried in the sent edge-Hello Packet.	EnabledStatus Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.113.2.6.1.3
hwRrppRingGroupMemberRowStatus Row status in the ring group configuration table. hwRrppRingGroupMemberDomainID, hwRrppRingGroupMemberRingID, and hwRrppRingGroupIsEdgeHelloSender must be specified to create a row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.113.2.6.1.4

A table containing information about RRPP snooping enable interface.

hwRrppSnoopingInterfaceEntry row .1.3.6.1.4.1.2011.5.25.113.3.1.1

Detailed information of a specified RRPP snooping enable interface.

Indexes

hwRrppSnoopingInterfaceId

Column	Syntax	OID
hwRrppSnoopingInterfaceId Logical index of the interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.113.3.1.1.1
hwRrppSnoopingVsiName The name of VSI which the interface was binding to.	OctetString	.1.3.6.1.4.1.2011.5.25.113.3.1.1.2
hwRrppSnoopingVlanId The VLAN which the intertace added to.	Q-BRIDGE-MIBVlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.2011.5.25.113.3.1.1.3
hwRrppSnoopingEnableStatus Indicating whether the RRPP snooping is enabled on this switch.	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.113.3.1.1.4
hwRrppSnoopingRowStatus This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.113.3.1.1.5
hwRrppSnoopingAllVsiStatus Indicating whether the RRPP snooping is associating all vsi on this switch. Options: 1. enabled(1) -indicates that the RRPP snooping is associated with all vsi under the same main interface 2. disabled(…	EnabledStatusr/w Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.2011.5.25.113.3.1.1.6
hwRrppSnoopingRecvPackets The statistics of common-flush or complete-flush packets received from this port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.25.113.3.1.1.7
hwRrppSnoopingResetStatistics Clears the statistics of packets received from this port.	Enumerationr/w Enumerated Values: 1 cleared 2 unused	.1.3.6.1.4.1.2011.5.25.113.3.1.1.8

A table containing information about RRPP snooping relating interface.

hwRrppSnoopingVsiEntry row .1.3.6.1.4.1.2011.5.25.113.3.2.1

Detailed information of a specified RRPP snooping relating interface.

Indexes

hwRrppSnoopingVsiInterfaceId hwVsiName

Column	Syntax	OID
hwRrppSnoopingVsiInterfaceId Logical index of the interface index.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.2011.5.25.113.3.2.1.1
hwVsiName The name of VSI.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.2011.5.25.113.3.2.1.2
hwRrppSnoopingVsiRowStatus This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.25.113.3.2.1.3