hwRrppRingNodeMode
HUAWEI-RRPP-MIB ·
.1.3.6.1.4.1.2011.5.25.113.2.2.1.5
Object
column
r/w
Enumeration
There are four RRPP node modes for the switch on a RRPP ring, such as master, transit, edge and assistant-edge. Each RRPP ring has a single designated master-node. All other nodes except edge-node and assistant-edge-node on that ring are referred to as transit-nodes. The node mode of edge and assistant-edge should be configured only on sub-ring. When there is a common link between a sub-ring and its major-ring, the node mode of the sub-ring must be edge or assistant-edge, and they must be configured in pairs. If node mode is designated as edge or assistant-edge, several points should be noticed: Major-ring must be created before a sub-ring is created; Major-ring can't be deleted unless all its sub-rings are deleted; The node mode of the switch on major-ring must be transit; Major-ring and sub-ring must have only a common port. This value can't be modified after created.
Context
- MIB
- HUAWEI-RRPP-MIB
- OID
.1.3.6.1.4.1.2011.5.25.113.2.2.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwRrppRingEntry
- Table
- hwRrppRingTable
- Siblings
- 9
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | master |
2 | transit |
3 | edge |
4 | assistantEdge |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwRrppRingID An index uniquely identifies a RRPP Ring.
This value can't be modified after created. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.5.25.113.2.2.1.1 |
| hwRrppRingResetStatistics Clears the statistics of packets received and sent on the current ring. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.113.2.2.1.10 |
| hwRrppRingEnableStatus Indicating whether the RRPP is enabled on this Ring.
NOTE: If major-ring and sub-ring(s) of a domain
coexist on a switch, major-ring must be enabled
before sub-ring is enabled. … | column | EnabledStatus | .1.3.6.1.4.1.2011.5.25.113.2.2.1.2 |
| hwRrppRingActive As both hwRrppEnableStatus and hwRrppRingEnableStatus
are enabled, the ring is activated. Whereas either of
the two items is disabled, the ring is inactive. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.113.2.2.1.3 |
| hwRrppRingState The status (i.e. unknown, health or fault) of the Ethernet
ring. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.113.2.2.1.4 |
| hwRrppRingPrimaryPort If the switch is a master-node or transit-node, this value
is ifIndex of the primary port; otherwise, if the switch is an
edge-node or assistant-edge-node, this value is ifIndex … | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.113.2.2.1.6 |
| hwRrppRingSecondaryPort If the switch is a master-node or transit-node, this value
is ifIndex of the secondary port; otherwise, if the switch is
an edge-node or assistant-edge-node, this value is ifIndex… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2011.5.25.113.2.2.1.7 |
| hwRrppRingLevel Level of a ring. This field should be set 0 on major-ring
and 1 on the sub-ring.
This value can't be modified after created. | column | Enumeration | .1.3.6.1.4.1.2011.5.25.113.2.2.1.8 |
| hwRrppRingRowStatus This object is responsible for managing the creation,
deletion and modification of rows, which support active
status and CreatAndGo, destroy operation.
To create a new row, hwRrpp… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.5.25.113.2.2.1.9 |