HUAWEI-QOS-MIB Table View

Indicates the queue scheduling feature, there is only one item.
The index of this table is hwQueuePortIfIndex.

hwQueueEntry row .1.3.6.1.4.1.2011.5.2.2.1

Indicates the queue scheduling feature, there is only one item.
The index of this entry is hwQueuePortIfIndex.

Indexes

hwQueuePortIfIndex

Column	Syntax	OID
hwQueuePortIfIndex The index of the table, it is used to configure the interface index for queue scheduling. Range: 1-255 0 indicates global.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.2011.5.2.2.1.1
hwQueueScheduleMode The flag indicates the queue scheduling mode. Options: 1. sp(1) -indicates the strict priority queue scheduling mode 2. wrr(2) -indicates the weighted round robin mode 3. wfq(8) -indicates the weighted fair queuing mode	Enumerationr/w Enumerated Values: 1 sp 2 wrr 8 wfq	.1.3.6.1.4.1.2011.5.2.2.1.2
hwQueueWeight1 In the WRR mode, it indicates the weight of queue 1; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 1.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.3
hwQueueWeight2 In the WRR mode, it indicates the weight of queue 2; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 2.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.4
hwQueueWeight3 In the WRR mode, it indicates the weight of queue 3; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 3.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.5
hwQueueWeight4 In the WRR mode, it indicates the weight of queue 4; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 4.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.6
hwQueueWeight5 In the WRR mode, it indicates the weight of queue 5; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 5.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.7
hwQueueWeight6 In the WRR mode, it indicates the weight of queue 6; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 6.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.8
hwQueueWeight7 In the WRR mode, it indicates the weight of queue 7; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 7.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.9
hwQueueWeight8 In the WRR mode, it indicates the weight of queue 8; 0 indicates an invalid value. In the WFQ mode, it indicates the minimum bandwidth quota of queue 8.	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.10
hwWFQMaxWeight1 Maximum bandwidth quota of queue 1	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.11
hwWFQMaxWeight2 Maximum bandwidth quota of queue 2	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.12
hwWFQMaxWeight3 Maximum bandwidth quota of queue 3	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.13
hwWFQMaxWeight4 Maximum bandwidth quota of queue 4	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.14
hwWFQMaxWeight5 Maximum bandwidth quota of queue 5	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.15
hwWFQMaxWeight6 Maximum bandwidth quota of queue 6	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.16
hwWFQMaxWeight7 Maximum bandwidth quota of queue 7	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.17
hwWFQMaxWeight8 Maximum bandwidth quota of queue 8	Integer32r/w Constraints: range: 0-100	.1.3.6.1.4.1.2011.5.2.2.1.18
hwQueueMaxDelay Maximum delay. 0 indicates an invalid value, invalid in current version.	Integer32 Constraints: range: 0-4080	.1.3.6.1.4.1.2011.5.2.2.1.19

Describes the traffic limitation on packets that are received by a specified port or a specified slot and that match the ACL rule. 
The indexes of this table are hwRateLimitAclIndex, hwRateLimitIfIndex, and hwRateLimitDirection.
Make sure that the ACL rule in hwRateLimitTable is already created in hwAclBasicRuleTable, hwAclAdvancedRuleTable, 
hwAclLinkTable, or hwAclUserTable.

hwRateLimitEntry row .1.3.6.1.4.1.2011.5.2.3.1

Describes the traffic limitation on packets that are received by a specified port or a specified slot and that match the ACL rule.
The indexes of this entry are hwRateLimitAclIndex, hwRateLimitIfIndex, and hwRateLimitD…

Indexes

hwRateLimitAclIndex hwRateLimitIfIndex hwRateLimitDirection

Column	Syntax	OID
hwRateLimitAclIndex The delivery entry index of an ACL rule used for traffic limitation is a delivery record entry index used by software, which is meaningless to users. The index is used in hwRateLimitTable to search the delivery entries…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.3.1.1
hwRateLimitIfIndex Specifies the index of a port or a slot for traffic limitation. It uniquely identifies a port or a slot. The value and algorithm are the same as those of ifIndex. If the configuration based on a slot, …	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.3.1.2
hwRateLimitDirection Indicates the direction where an ACL rule used for traffic limitation takes effect. Currently, only the inbound direction is supported. Options: 1. invalid(0) -indicates an invalid parameter 2. inbound(1) -indicat…	Enumeration Enumerated Values: 0 invalid 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.2.3.1.3
hwRateLimitUserAclNum Describes the user-defined ACL rule group that is used when a user-defined ACL rule for traffic limitation is delivered to a specified port or a specified slot. Range: 0, 5000-5999 Make sure that the user-defined ACL r…	Integer32r/w Constraints: range: 0-0 range: 5000-5999	.1.3.6.1.4.1.2011.5.2.3.1.4
hwRateLimitUserAclSubitem Describes the user-defined ACL rule that is used when a user-defined ACL rule for traffic limitation is delivered to a specified port or a specified slot. This leaf must be used together with hwRateLimitUserAclNum, uni…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.3.1.5
hwRateLimitIpAclNum Describes the basic or advanced ACL rule group that is used when a basic or advanced ACL rule for traffic limitation is delivered to a specified port or a specified slot. Range: 0, 2000-3999 Make sure that the basic or…	Integer32r/w Constraints: range: 0-0 range: 2000-3999	.1.3.6.1.4.1.2011.5.2.3.1.6
hwRateLimitIpAclSubitem Describes the basic or advanced ACL rule that is used when a basic or advanced ACL rule for traffic limitation is delivered to a specified port or a specified slot. This leaf must be used together with hwRateLimitIpAc…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.3.1.7
hwRateLimitLinkAclNum Describes the L2 ACL rule group that is used when an L2 ACL rule for traffic limitation is delivered to a specified port or a specified slot. Range: 0, 4000-4999 Make sure that the L2 ACL rule group is already created. …	Integer32r/w Constraints: range: 0-0 range: 4000-4999	.1.3.6.1.4.1.2011.5.2.3.1.8
hwRateLimitLinkAclSubitem Describes the L2 ACL rule that is used when an L2 ACL rule for traffic limitation is delivered to a specified port or a specified slot. This leaf must be used together with hwRateLimitLinkAclNum, uniquely identifying a…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.3.1.9
hwRateLimitTargetRate Indicates the target value of traffic limitation on a port or a specified slot. Range: 64-10000000 (which must be an integer multiple of 64) Unit: Kbit/s. 0 indicates an invalid value. If hwRateLimitTargetRate and hwR…	Integer32r/w Constraints: range: 0-0 range: 64-10000000	.1.3.6.1.4.1.2011.5.2.3.1.10
hwRateLimitExceedDrop Indicates the action when traffic exceeds the target value. Options: 1.true(1) -discard 2.false(2) -not discard If this leaf is not specified, the default value is true(1). In the set operation, if false(2) …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.2.3.1.11
hwRateLimitExceedDscp Describes the specified DSCP priority when configuring the DSCP priority of the packets that match the ACL rule. The larger the DSCP value is, the higher the priority is. Range: 0-63, 255 In the query operation, if th…	Integer32r/w Constraints: range: 0-63 range: 255-255	.1.3.6.1.4.1.2011.5.2.3.1.12
hwRateLimitRuntime Describes whether the ACL rule for traffic limitation delivered to a specified port or a specified slot takes effect. This leaf is read-only. Options: 1. true(1) -if the ACL rule is associated with a time range par…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.2.3.1.13
hwRateLimitRowStatus Indicates the row status. It is used for delivering an ACL rule for traffic limitation to a specified port or a specified slot and deleting the delivered ACL rule on a port or a specified slot. Options: 1. active(1) …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.2.3.1.14
hwRateLimitCir Indicates the Committed information rate for rate limiting. Value Rage: 0, 64-10240000. 0 indicates an invalid value. unit: Kbit/s	Integer32r/w Constraints: range: 0-0 range: 64-10240000	.1.3.6.1.4.1.2011.5.2.3.1.15
hwRateLimitCbs Indicates the Committed burst size for rate limiting. Value Rage: 0, 2000-10240000. If not set, the value is min(2000+hwRateLimitCir*32, 1024000). 0 indicates an invalid value. unit: byte	Integer32r/w Constraints: range: 0-0 range: 2000-10240000	.1.3.6.1.4.1.2011.5.2.3.1.16
hwRateLimitPir Indicates the Peak information rate for rate limiting. If not set, the value is min(hwRateLimitCir*2, 10240000). PIR must not be less than CIR. Value Rage: 0, 64-10240000. 0 indicates an invalid value. unit: Kbit/s	Integer32r/w Constraints: range: 0-0 range: 64-10240000	.1.3.6.1.4.1.2011.5.2.3.1.17
hwRateLimitPbs Indicates the Committed information rate for rate limiting. If not set, the value is min(2000+hwRateLimitPir*32, 1024000). Value Rage: 0, 2000-10240000. 0 indicates an invalid value. unit: byte	Integer32r/w Constraints: range: 0-0 range: 2000-10240000	.1.3.6.1.4.1.2011.5.2.3.1.18
hwRateLimitIpv6AclNum Indicates the basic or advanced ACLv6 rule group that is used when a basic or advanced ACLv6 rule for traffic limitation is delivered to a specified port or a specified slot. Range: 0, 2000-3999 Make sure that the basi…	Integer32r/w Constraints: range: 0-0 range: 2000-3999	.1.3.6.1.4.1.2011.5.2.3.1.19
hwRateLimitIpv6AclSubitem Indicates the basic or advanced ACLv6 rule that is used when a basic or advanced ACLv6 rule for traffic limitation is delivered to a specified port or a specified slot. This leaf must be used together with hwRateLimit…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.3.1.20
hwRateLimitRedDrop Indicates the action when traffic is marked to red. TRUE(1): discard the packets. FALSE(2): don't discard the packets	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.2.3.1.21
hwRateLimitRedRemarkDscp Indicates the new DSCP value that is preset when the preset traffic is marked to red. -1 indicates an invalid value	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.2011.5.2.3.1.22
hwRateLimitYellowDrop Indicates the action when traffic is marked to yellow. TRUE(1): discard the packets. FALSE(2): don't discard the packets	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.2.3.1.23
hwRateLimitYellowRemarkDscp Indicates the new DSCP value that is preset when the preset traffic is marked to yellow. -1 indicates an invalid value	Integer32r/w Constraints: range: -1-63	.1.3.6.1.4.1.2011.5.2.3.1.24

Describes the priority marking for packets that match the ACL rule on a specified port or a specified slot. 
The indexes of this table are hwPriorityAclIndex, hwPriorityIfIndex and hwPriorityDirection.
Make sure that the ACL rule in hwPriorityTable is already created in hwAclBasicRuleTable, 
hwAclAdvancedRuleTable, hwAclLinkTable, or hwAclUserTable.

hwPriorityEntry row .1.3.6.1.4.1.2011.5.2.4.1

Describes the priority marking for packets that match the ACL rule on a specified port or a specified slot.
The indexes of this entry are hwPriorityAclIndex, hwPriorityIfIndex and hwPriorityDirection.
Make sure that th…

Indexes

hwPriorityAclIndex hwPriorityIfIndex hwPriorityDirection

Column	Syntax	OID
hwPriorityAclIndex Indicates the delivery entry index of an ACL rule for priority marking. It is a delivery record entry index used by software, which is meaningless to users. The index is used in hwPriorityTable to search the delivery …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.4.1.1
hwPriorityIfIndex Indicates the port index or the slot index when the device delivers an ACL rule for priority marking to a specified port or a specified slot. The index uniquely identifies a port or a slot. The value and algorithm are …	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.4.1.2
hwPriorityDirection Indicates the direction where an ALC rule for priority marking takes effect when the device delivers an ACL rule to a specified port or a specified slot. Options: 1. invalid(0) -indicates an invalid parameter. 2. i…	Enumeration Enumerated Values: 0 invalid 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.2.4.1.3
hwPriorityUserAclNum Describes the user-defined ACL rule group that is used when a user-defined ACL rule for priority marking is delivered to a specified port or a specified slot. Range: 0, 5000-5999 Make sure that the user-defined ACL ru…	Integer32r/w Constraints: range: 0-0 range: 5000-5999	.1.3.6.1.4.1.2011.5.2.4.1.4
hwPriorityUserAclSubitem Describes the user-defined ACL rule that is used when a user-defined ACL rule for priority marking is delivered to a specified port or a specified slot. This leaf must be used together with hwPriorityUserAclNum, uniqu…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.4.1.5
hwPriorityIpAclNum Describes the basic or advanced ACL rule group that is used when a basic or advanced ACL rule for priority marking is delivered to a specified port or a specified slot. Range: 0, 2000-3999 Make sure that the basic or a…	Integer32r/w Constraints: range: 0-0 range: 2000-3999	.1.3.6.1.4.1.2011.5.2.4.1.6
hwPriorityIpAclSubitem Describes the basic or advanced ACL rule that is used when a basic or advanced ACL rule for priority marking is delivered to a specified port or a specified slot. This leaf must be used together with hwPriorityIpAclNum…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.4.1.7
hwPriorityLinkAclNum Describes the L2 ACL rule group that is used when an L2 ACL rule for priority marking is delivered to a specified port or a specified slot. Range: 0, 4000-4999 Make sure that the L2 ACL rule group is already created. …	Integer32r/w Constraints: range: 0-0 range: 4000-4999	.1.3.6.1.4.1.2011.5.2.4.1.8
hwPriorityLinkAclSubitem Describes the L2 ACL rule that is used when an L2 ACL rule for priority marking is delivered to a specified port or a specified slot. This leaf must be used together with hwPriorityLinkAclNum, uniquely identifying an…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.4.1.9
hwPriorityDscp Describes the specified DSCP priority when configuring the DSCP priority for the packets that match the ACL rule for priority marking. The larger the DSCP value is, the higher the priority is. Range: 0-63, 255 In the…	Integer32r/w Constraints: range: 0-63 range: 255-255	.1.3.6.1.4.1.2011.5.2.4.1.10
hwPriorityIpPreValue Describes the specified IP precedence when configuring the IP precedence for the packets that match the ACL rule for precedence marking. Range: 0-7, 255 The larger the value is, the higher the precedence is. In the que…	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.2011.5.2.4.1.11
hwPriorityIpPreFromCos Indicates whether to set the IP priority the same as the 802.1p priority, that is, copy the 802.1p priority. Options: 1. true(1) -copy 2. false(2) -not copy If this leaf is not specified, the default value i…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.2.4.1.12
hwPriorityCosValue Describes the specified 802.1p priority when configuring the 802.1p priority for the packets that match the ACL rule for priority marking. Range: 0-7, 255 The larger the value is, the higher the priority is. In the qu…	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.2011.5.2.4.1.13
hwPriorityCosFromIpPre Indicates whether to set the IP priority the same as the 802.1p priority, that is, copy the IP priority. Options: 1. true(1) -copy 2. false(2) -not copy If this leaf is not specified, the default value is fals…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.2.4.1.14
hwPriorityLocalPre Describes the specified local priority when configuring the local priority for the packets that match the ACL rule for priority marking. Range: 0-7, 255 The larger the value is, the higher the priority is. In the quer…	Integer32r/w Constraints: range: 0-7 range: 255-255	.1.3.6.1.4.1.2011.5.2.4.1.15
hwPriorityRuntime Describes whether the ACL rule for priority marking delivered to a specified port or a specified slot takes effect. This leaf is read-only. Options: 1. true(1) -if the ACL rule is associated with a time range param…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.2.4.1.16
hwPriorityRowStatus Indicates the row status. It is used for delivering an ACL rule for priority marking to a specified port or a specified slot and deleting the delivered ACL rule on a port or a slot. Options: 1. active(1) -whe…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.2.4.1.17
hwPriorityIpv6AclNum Indicates the basic or advanced ACLv6 rule group that is used when a basic or advanced ACLv6 rule for priority marking is delivered to a specified port or a specified slot. Range: 0, 2000-3999 Make sure that the basic …	Integer32r/w Constraints: range: 0-0 range: 2000-3999	.1.3.6.1.4.1.2011.5.2.4.1.18
hwPriorityIpv6AclSubitem Indicates the basic or advanced ACLv6 rule that is used when a basic or advanced ACLv6 rule for priority marking is delivered to a specified port or a specified slot. This leaf must be used together with hwPriorityIpv6…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.4.1.19

Describes the redirection for packets that match the ACL rule from a port to another port. 
The indexes of this table are hwRedirectAclIndex, hwRedirectIfIndex and hwRedirectDirection.
Make sure that the ACL rule in hwRedirectTable is already created in hwAclBasicRuleTable, 
hwAclAdvancedRuleTable, hwAclLinkTable, or hwAclUserTable.

hwRedirectEntry row .1.3.6.1.4.1.2011.5.2.5.1

Describes the redirection for packets that match the ACL rule from a port to another port.
The indexes of this entry are hwRedirectAclIndex, hwRedirectIfIndex and hwRedirectDirection.
Make sure that the ACL rule in hwR…

Indexes

hwRedirectAclIndex hwRedirectIfIndex hwRedirectDirection

Column	Syntax	OID
hwRedirectAclIndex The delivery entry index of an ACL rule for redirecting packets is a delivery record entry index used by software, which is meaningless to users. The index is used in hwRedirectTable to search the delivery entries fas…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.5.1.1
hwRedirectIfIndex Indicates the port index when the device delivers an ACL rule for redirecting packets to a specified port. The index uniquely identifies a port. The value and algorithm are the same as those of ifIndex. Range: 0-4294…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.5.1.2
hwRedirectDirection Indicates the direction where an ACL rule for redirecting packets takes effect when the device delivers an ACL rule to a specified port. Options: 1. invalid(0) -indicates an invalid parameter. 2. inbound(1) -indicat…	Enumeration Enumerated Values: 0 invalid 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.2.5.1.3
hwRedirectUserAclNum Describes the user-defined ACL rule group that is used when a user-defined ACL rule for redirecting packets is delivered to a specified port. Range: 0, 5000-5999 Make sure that the user-defined ACL rule group is alread…	Integer32r/w Constraints: range: 0-0 range: 5000-5999	.1.3.6.1.4.1.2011.5.2.5.1.4
hwRedirectUserAclSubitem Describes the user-defined ACL rule that is used when a user-defined ACL rule for redirecting packets is delivered to a specified port. This leaf must be used together with hwRedirectUserAclNum, uniquely identifying a…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.5.1.5
hwRedirectIpAclNum Describes the basic or advanced ACL rule group that is used when a basic or advanced ACL rule for redirecting packets is delivered to a specified port. Range: 0, 2000-3999 Make sure that the basic or advanced ACL rule …	Integer32r/w Constraints: range: 0-0 range: 2000-3999	.1.3.6.1.4.1.2011.5.2.5.1.6
hwRedirectIpAclSubitem Describes the basic or advanced ACL rule that is used when a basic or advanced ACL rule for redirecting packets is delivered to a specified port. This leaf must be used together with hwRedirectIpAclNum, uniquely ident…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.5.1.7
hwRedirectLinkAclNum Describes the L2 ACL rule group that is used when an L2 ACL rule for redirecting packets is delivered to a specified port. Range: 0, 4000-4999 Make sure that the L2 ACL rule group is already created. In the query oper…	Integer32r/w Constraints: range: 0-0 range: 4000-4999	.1.3.6.1.4.1.2011.5.2.5.1.8
hwRedirectLinkAclSubitem Describes the L2 ACL rule that is used when an L2 ACL rule for redirecting packets is delivered to a specified port. This leaf must be used together with hwRedirectLinkAclNum, uniquely identifying an ACL rule. Range: …	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.5.1.9
hwRedirectToCpu Indicates whether to redirect packets to the CPU. After the packets are redirected to the CPU, they cannot be forwarded. Options: 1. true(1) -indicates to redirect packets to the CPU 2. false(2) -indicates to r…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.2.5.1.10
hwRedirectToIfIndex Indicates the index for redirecting the packet to the destination port. The value and algorithm are the same as those of ifIndex. Range: 0-4294967295	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.5.1.11
hwRedirectRuntime Describes whether the ACL rule for redirecting packets delivered to a specified port takes effect. This leaf is read-only. Options: 1. true(1) -if the ACL rule is associated with a time range parameter …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.2.5.1.12
hwRedirectRowStatus Indicates the row status. It is used for delivering an ACL rule for redirecting packets to a specified port and deleting the delivered ACL rule on a port. Options: 1. active(1) -when this leaf is queried, the v…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.2.5.1.13
hwRedirectIpv6AclNum Indicates the basic or advanced ACLv6 rule group that is used when a basic or advanced ACLv6 rule for redirecting packets is delivered to a specified port. Range: 0, 2000-3999 Make sure that the basic or advanced ACLv6…	Integer32r/w Constraints: range: 0-0 range: 2000-3999	.1.3.6.1.4.1.2011.5.2.5.1.14
hwRedirectIpv6AclSubitem Indicates the basic or advanced ACLv6 rule that is used when a basic or advanced ACLv6 rule for redirecting packets is delivered to a specified port. This leaf must be used together with hwRedirectIpv6AclNum, uniquely…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.5.1.15

Describes the statistics of packets that match the ACL rule on a specified port. 
The indexes of this table are hwStatisticAclIndex, hwStatisticIfIndex, and hwStatisticDirection.
Make sure that the ACL rule in hwStatisticTable is already created in hwAclBasicRuleTable, 
hwAclAdvancedRuleTable, hwAclLinkTable, or hwAclUserTable.

hwStatisticEntry row .1.3.6.1.4.1.2011.5.2.6.1

Describes the statistics of packets that match the ACL rule on a specified port.
The indexes of this entry are hwStatisticAclIndex, hwStatisticIfIndex, and hwStatisticDirection.
Make sure that the ACL rule in hwStatist…

Indexes

hwStatisticAclIndex hwStatisticIfIndex hwStatisticDirection

Column	Syntax	OID
hwStatisticAclIndex Indicates the delivery entry index of an ACL rule for traffic measurement. It is a delivery record entry index used by software, which is meaningless to users. The index is used in hwStatisticTable to search the deliv…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.6.1.1
hwStatisticIfIndex Indicates the port index when the device delivers an ACL rule for traffic measurement to a specified port. The index uniquely identifies a port. The value and algorithm are the same as those of ifIndex. Range: 0-4294…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.6.1.2
hwStatisticDirection Indicates the direction where an ACL rule for traffic measurement takes effect when the device delivers an ACL rule to a specified port. Options: 1. invalid(0) -indicates an invalid parameter. 2. inbound(1) -i…	Enumeration Enumerated Values: 0 invalid 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.2.6.1.3
hwStatisticUserAclNum Describes the user-defined ACL rule group that is used when a user-defined ACL rule for traffic measurement is delivered to a specified port. Range: 0, 5000-5999 Make sure that the user-defined ACL rule group is alread…	Integer32r/w Constraints: range: 0-0 range: 5000-5999	.1.3.6.1.4.1.2011.5.2.6.1.4
hwStatisticUserAclSubitem Describes the user-defined ACL rule that is used when a user-defined ACL rule for traffic measurement is delivered to a specified port. This leaf must be used together with hwStatisticUserAclNum, uniquely identifying…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.6.1.5
hwStatisticIpAclNum Describes the basic or advanced ACL rule group that is used when a basic or advanced ACL rule for traffic measurement is delivered to a specified port. Range: 0, 2000-3999 Make sure that the basic or advanced ACL rule…	Integer32r/w Constraints: range: 0-0 range: 2000-3999	.1.3.6.1.4.1.2011.5.2.6.1.6
hwStatisticIpAclSubitem Describes the basic or advanced ACL rule that is used when a basic or advanced ACL rule for traffic measurement is delivered to a specified port. This leaf must be used together with hwStatisticIpAclNum, uniquely ide…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.6.1.7
hwStatisticLinkAclNum Describes the L2 ACL rule group that is used when an L2 ACL rule for traffic measurement is delivered to a specified port. Range: 0, 4000-4999 Make sure that the L2 ACL rule group is already created. In the query oper…	Integer32r/w Constraints: range: 0-0 range: 4000-4999	.1.3.6.1.4.1.2011.5.2.6.1.8
hwStatisticLinkAclSubitem Describes the L2 ACL rule that is used when an L2 ACL rule for traffic measurement is delivered to a specified port. This leaf must be used together with hwStatisticLinkAclNum, uniquely identifying an ACL rule. Range:…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.6.1.9
hwStatisticRuntime Describes whether the ACL rule for traffic measurement delivered to a specified port takes effect. This leaf is read-only. Options: 1. true(1) -if the ACL rule is associated with a time range parameter …	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.2.6.1.10
hwStatisticPacketCount Describes the statistics of packets that matches an ACL rule on a specified port.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.2.6.1.11
hwStatisticCountClear Used for deleting the statistics of packets that matches an ACL rule on a specified port. To clear hwStatisticPacketCount, you can set this leaf to cleared(1). In the query operation, this leaf is fixed to nouse(2). …	Enumerationr/w Enumerated Values: 1 cleared 2 nouse	.1.3.6.1.4.1.2011.5.2.6.1.12
hwStatisticRowStatus Indicates the row status. It is used for delivering an ACL rule for traffic measurement to a specified port and deleting the delivered ACL rule on a port. Options: 1. active(1) -when this leaf is queried, the …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.2.6.1.13
hwStatisticUnit Indicates Unit of a standard or extended ACLv6 for traffic measurement. Options: 1. packet(1) -measure by packet 2. byte(2) -measure by byte Default: packet(1)	Enumerationr/w Enumerated Values: 1 packet 2 byte	.1.3.6.1.4.1.2011.5.2.6.1.14
hwStatisticByteCount Indicates the count of matched bytes.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.2.6.1.15
hwStatisticIpv6AclNum Indicates the basic or advanced ACLv6 rule group that is used when a basic or advanced ACLv6 rule for traffic measurement is delivered to a specified port. Range: 0, 2000-3999 Make sure that the basic or advanced ACLv…	Integer32r/w Constraints: range: 0-0 range: 2000-3999	.1.3.6.1.4.1.2011.5.2.6.1.16
hwStatisticIpv6AclSubitem Indicates the basic or advanced ACLv6 rule that is used when a basic or advanced ACLv6 rule for traffic measurement is delivered to a specified port. This leaf must be used together with hwStatisticIpv6AclNum, unique…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.6.1.17

Describes the mirroring for packets that match the ACL rule from a port or a slot to another port. 
The indexes of this table are hwMirrorAclIndex, hwMirrorIfIndex, and hwMirrorDirection.
Make sure that the ACL rule in hwMirrorTable is already created in hwAclBasicRuleTable, 
hwAclAdvancedRuleTable, hwAclLinkTable, or hwAclUserTable.

hwMirrorEntry row .1.3.6.1.4.1.2011.5.2.7.1

Describes the mirroring for packets that match the ACL rule from a port or a slot to another port.
The indexes of this entry are hwMirrorAclIndex, hwMirrorIfIndex, and hwMirrorDirection.
Make sure that the ACL rule in …

Indexes

hwMirrorAclIndex hwMirrorIfIndex hwMirrorDirection

Column	Syntax	OID
hwMirrorAclIndex Indicates the delivery entry index of an ACL rule for mirroring packets. It is a delivery record entry index used by software, which is meaningless to users. The index is used in hwMirrorTable to search the delivery e…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.7.1.1
hwMirrorIfIndex Indicates the port or the slot index when the device delivers an ACL rule for mirroring packets to a specified port. The index uniquely identifies a port or a slot. The value and algorithm are the same as those of ifIn…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.7.1.2
hwMirrorDirection Indicates the direction where an ACL rule for mirroring packets takes effect when the device delivers an ACL rule to a specified port or a specified slot. Options: 1. invalid(0) -indicates an invalid paramet…	Enumeration Enumerated Values: 0 invalid 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.2.7.1.3
hwMirrorUserAclNum Describes the user-defined ACL rule group that is used when a user-defined ACL rule for mirroring packets is delivered to a specified port or a specified slot. Range: 0, 5000-5999 Make sure that the user-defined ACL ru…	Integer32r/w Constraints: range: 0-0 range: 5000-5999	.1.3.6.1.4.1.2011.5.2.7.1.4
hwMirrorUserAclSubitem Describes the user-defined ACL rule that is used when a user-defined ACL rule for mirroring packets is delivered to a specified port or a specified slot. This leaf must be used together with hwMirrorUserAclNum, uniqu…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.7.1.5
hwMirrorIpAclNum Describes the basic or advanced ACL rule group that is used when a basic or advanced ACL rule for mirroring packets is delivered to a specified port or a specified slot. Range: 0, 2000-3999 Make sure that the basic or …	Integer32r/w Constraints: range: 0-0 range: 2000-3999	.1.3.6.1.4.1.2011.5.2.7.1.6
hwMirrorIpAclSubitem Describes the basic or advanced ACL rule that is used when a basic or advanced ACL rule for mirroring packets is delivered to a specified port or a specified slot. This leaf must be used together with hwMirrorIpAclNum…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.7.1.7
hwMirrorLinkAclNum Describes the L2 ACL rule group that is used when an L2 ACL rule for mirroring packets is delivered to a specified port or a specified slot. Range: 0, 4000-4999 Make sure that the L2 ACL rule group is already created. …	Integer32r/w Constraints: range: 0-0 range: 4000-4999	.1.3.6.1.4.1.2011.5.2.7.1.8
hwMirrorLinkAclSubitem Describes the L2 ACL rule that is used when an L2 ACL rule for mirroring packets is delivered to a specified port or a specified slot. This leaf must be used together with hwMirrorLinkAclNum, uniquely identifying an …	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.7.1.9
hwMirrorToIfIndex Indicates the index for mirroring the packets to the destination port. The value and algorithm are the same as those of ifIndex. Range: 0-4294967295	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.7.1.10
hwMirrorRuntime Describes whether the ACL rule for mirroring packets delivered to a specified port or a specified slot takes effect. This leaf is read-only. Options: 1. true(1) --If the ACL rule is associated with a time range para…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.2.7.1.11
hwMirrorRowStatus Indicates the row status. It is used for delivering an ACL rule for mirroring packets to a specified port or a specified slot and deleting the delivered ACL rule on a port or a slot. Options: 1. active(1) -when…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.2.7.1.12
hwMirrorIpv6AclNum Indicates the basic or advanced ACLv6 rule group that is used when a basic or advanced ACLv6 rule for mirroring packets is delivered to a specified port or a specified slot. Range: 0, 2000-3999 Make sure that the basic…	Integer32r/w Constraints: range: 0-0 range: 2000-3999	.1.3.6.1.4.1.2011.5.2.7.1.13
hwMirrorIpv6AclSubitem Indicates the basic or advanced ACLv6 rule that is used when a basic or advanced ACLv6 rule for mirroring packets is delivered to a specified port or a specified slot. This leaf must be used together with hwMirrorIpv6…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.7.1.14
hwMirrorToCpu Indicates whether to mirror packets to the CPU. Options: 1. true(1) -indicates to mirror packets to the CPU 2. false(2) -indicates to mirror packets to a specified port If you want to mirror packets to a destin…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.2011.5.2.7.1.15

Describes the rate limitation on packets that match the ACL rule on a specified port. 
The index of this table is hwLineRateIfIndex.

hwLineRateEntry row .1.3.6.1.4.1.2011.5.2.9.1

Describes the rate limitation on packets that match the ACL rule on a specified port.
The index of this entry is hwLineRateIfIndex.

Indexes

hwLineRateIfIndex

Column	Syntax	OID
hwLineRateIfIndex Indicates the index of the port on which rate limitation is configured. The value and algorithm are the same as those of ifIndex. Range: 0-4294967295	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.9.1.1
hwLineRateValue Indicates the outbound rate limitation of a port. Range: -1, 64-10000000 (which must be an integer multiple of 64) Unit: Kbit/s. when the value is set to -1 and the value of hwLineRateRowStatus is set to destroy(6), …	Integer32r/w Constraints: range: -1--1 range: 64-10000000	.1.3.6.1.4.1.2011.5.2.9.1.2
hwLineRateRowStatus Indicates the row status. It is used to configure, modify, or delete an ACL rule for rate limitation on a specified port. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. c…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.2.9.1.3
hwLineRateInboundValue Indicates the inbound rate limitation of a port. Range: -1, 64-10000000 (which must be an integer multiple of 64) Unit: Kbit/s. when the value is set to -1 and the value of hwLineRateRowStatus is set to destroy(6), i…	Integer32r/w Constraints: range: -1--1 range: 64-10000000	.1.3.6.1.4.1.2011.5.2.9.1.4
hwLineRateInboundCarValue Indicates the inbound rate limitation of a port in CAR mode. Range: -1, 64-10000000 (which must be an integer multiple of 64) Unit: Kbit/s. when the value is set to -1 and the value of hwLineRateRowStatus is set to de…	Integer32r/w Constraints: range: -1--1 range: 64-10000000	.1.3.6.1.4.1.2011.5.2.9.1.5

Indicates the ONT down stream traffic table. It is used to add, query, 
modify or delete an ONT down stream traffic table.
The indexes of this table are hwOntRateLimitIfIndex and hwOntRateLimitOntId.

hwOntRateLimitEntry row .1.3.6.1.4.1.2011.5.2.12.1

Indicates the ONT down stream traffic table. It is used to add, query,
modify or delete an ONT down stream traffic table.
The indexes of this entry are hwOntRateLimitIfIndex and hwOntRateLimitOntId.

Indexes

hwOntRateLimitIfIndex hwOntRateLimitOntId

Column	Syntax	OID
hwOntRateLimitIfIndex It is one of the table indexes. Specifies the index of a port for ONT traffic limitation. It uniquely identifies a port. The value and algorithm are the same as those of ifIndexes.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.12.1.1
hwOntRateLimitOntId It is one of the table indexes. Indicates the ONT ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.12.1.2
hwOntRateLimitDSTrafficTableId Indicates the down stream traffic table ID.	Integer32r/w Constraints: range: 1-1024	.1.3.6.1.4.1.2011.5.2.12.1.3
hwOntRateLimitRowStatus Indicates the row status. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -deliver a traffic table ID to an ONT. 3. destroy(6) -delete an ONT traffic table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.2.12.1.4

Describes the ACL resources in current system. 
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwAclResourceEntry row .1.3.6.1.4.1.2011.5.2.18.1

Describes the ACL resources in current system.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column	Syntax	OID
hwAclResourceRemainUserAclNum Describes the number of remaining user rules in the system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.2.18.1.1
hwAclResourceUserConfigedUserAclNum Describes the number of user rules configured by users.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.2.18.1.2
hwAclResourceSysUsedUserAclNum Describes the number of user rules used by the system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.2.18.1.3
hwAclResourceRemainIpv4AclNum Describes the number of remaining Ipv4 and Link rules in the system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.2.18.1.4
hwAclResourceUserConfigedIpv4AclNum Describes the number of Ipv4 and Link rules configured by users.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.2.18.1.5
hwAclResourceSysUsedIpv4AclNum Describes the number of Ipv4 and Link rules used by the system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.2.18.1.6
hwAclResourceRemainIpv6AclNum Describes the number of remaining Ipv6 rules in the system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.2.18.1.7
hwAclResourceUserConfigedIpv6AclNum Describes the number of Ipv6 rules configured by users.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.2.18.1.8
hwAclResourceSysUsedIpv6AclNum Describes the number of Ipv6 rules used by the system.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.2.18.1.9

Used to query and modify the HQoS mode of current board.
The indexes of this table are hwFrameIndex and hwSlotIndex.

hwHQoSModeEntry row .1.3.6.1.4.1.2011.5.2.19.1

Used to query and modify the HQoS mode of current board.
The indexes of this entry are hwFrameIndex and hwSlotIndex.

Indexes

HUAWEI-DEVICE-MIBhwFrameIndex HUAWEI-DEVICE-MIBhwSlotIndex

Column	Syntax	OID
hwHQoSMode Describes the HQoS mode of current board. Options: 1. basic(1) -indicates the board HQoS mode is basic. 2. bandwidth(2) -indicates the board HQoS mode is bandwidth priority. 3. service(3) -indicates the board HQoS…	Enumerationr/w Enumerated Values: 1 basic 2 bandwidth 3 service	.1.3.6.1.4.1.2011.5.2.19.1.1
hwHQoSModeSubMode Describes the sub mode of Hqos mode. Options: 1. noSubModeInfo(1) -invalid value. 2. subMode1(2) -indicates the board HQoS mode is basic and the sub mode is 1. 3. subMode2(3) -indicates the board H…	Enumeration Enumerated Values: 1 noSubModeInfo 2 subMode1 3 subMode2	.1.3.6.1.4.1.2011.5.2.19.1.2

Indicates the HQoS subscriber profile table. It is used to add, modify, query, or delete a subscriber profile.
The index of this table is hwSubscriberProfileName.

hwSubscriberProfileEntry row .1.3.6.1.4.1.2011.5.2.20.1

Indicates the HQoS subscriber profile table. It is used to add, modify, query, or delete a subscriber profile.
The index of this entry is hwSubscriberProfileName.

Indexes

hwSubscriberProfileName

Column	Syntax	OID
hwSubscriberProfileName Indicates the name of the HQoS subscriber profile. Range: a string of 1-32 characters The input index consists of the subscriber profile name and the length of the subscriber profile name. The input profile name must …	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.2011.5.2.20.1.1
hwSubscriberProfileOutboundTrafficTableIndex Indicates the index of the IP traffic table used by downstream packets. Range: 1-1024 The IP traffic table must exist in hwIpTrafficParamTable. -1 indicates unbinding IP traffic table.	Integer32r/w Constraints: range: -1--1 range: 1-1024	.1.3.6.1.4.1.2011.5.2.20.1.2
hwSubscriberProfileOutboundTrafficTableName Indicates the name of the IP traffic table used by downstream packets. The IP traffic table must exist in hwIpTrafficParamTable.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.2.20.1.3
hwSubscriberProfileMergeQueueProfileId Indicates the HQoS merge queue profile ID. 4294967295 indicates unbinding merge queue profile.	Unsigned32r/w Constraints: range: 1-4 range: 4294967295-4294967295	.1.3.6.1.4.1.2011.5.2.20.1.4
hwSubscriberProfileMergeQueueOutboundTrafficTableIndex Indicates the index of the IP traffic table used by downstream packets. Range: 1-1024 The IP traffic table must exist in hwIpTrafficParamTable. -1 indicates unbinding IP traffic table.	Integer32r/w Constraints: range: -1--1 range: 1-1024	.1.3.6.1.4.1.2011.5.2.20.1.5
hwSubscriberProfileMergeQueueOutboundTrafficTableName Indicates the name of the IP traffic table used by downstream packets. The IP traffic table must exist in hwIpTrafficParamTable.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.2.20.1.6
hwSubscriberProfileRowStatus Indicates the row status. Options: 1. active(1) 2. createAndGo(4) 3. destroy(6)	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.2.20.1.7

Indicates the HQoS subscriber table. It is used to add, modify, query, or delete a subscriber.
The indexes of this table are hwSubscriberIfIndex, hwSubscriberOntId, and hwSubscriberId.

hwSubscriberEntry row .1.3.6.1.4.1.2011.5.2.21.1

Indicates the HQoS subscriber table. It is used to add, modify, query, or delete a subscriber.
The indexes of this entry are hwSubscriberIfIndex, hwSubscriberOntId, and hwSubscriberId.

Indexes

hwSubscriberIfIndex hwSubscriberOntId hwSubscriberId

Column	Syntax	OID
hwSubscriberIfIndex It is one of the table indexes. Specifies the index of a port for HQoS subscriber. It uniquely identifies a port. The value and algorithm are the same as those of ifIndexes.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.2.21.1.1
hwSubscriberOntId It is one of the table indexes. Indicates the ONT ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.21.1.2
hwSubscriberId It is one of the table indexes. Indicates the subscriber ID. The subscriber ID is not unique between different ONTs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.21.1.3
hwSubscriberBoundProfileName Indicates the name of the subscriber profile. The subscriber profile must exist in hwSubscriberProfileTable.	OctetStringr/w Constraints: range: 1-32	.1.3.6.1.4.1.2011.5.2.21.1.4
hwSubscriberRowStatus Indicates the row status. Options: 1. active(1) -indicates the query operation. 2. createAndGo(4) -indicates creating an HQoS subscriber. 3. destroy(6) -indicates deleting an HQoS subscriber. In creation, you …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.2.21.1.5

Indicates the HQoS subscriber member table. It is used to add, modify, query, or delete a subscriber member.
The indexes of this table are hwSubscriberMemberIfIndex, hwSubscriberMemberOntId, hwSubscriberMemberGroupId, and hwSubscriberMemberFlowIndex.

hwSubscriberMemberEntry row .1.3.6.1.4.1.2011.5.2.22.1

Indicates the HQoS subscriber member table. It is used to add, modify, query, or delete a subscriber member.
The indexes of this entry are hwSubscriberMemberIfIndex, hwSubscriberMemberOntId, hwSubscriberMemberGroupId, a…

Indexes

hwSubscriberMemberIfIndex hwSubscriberMemberOntId hwSubscriberMemberGroupId hwSubscriberMemberFlowIndex

Column	Syntax	OID
hwSubscriberMemberIfIndex It is one of the table indexes. Specifies the index of a port for HQoS subscriber. It uniquely identifies a port. The value and algorithm are the same as those of ifIndexes.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.2011.5.2.22.1.1
hwSubscriberMemberOntId It is one of the table indexes. Indicates the ONT ID.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.22.1.2
hwSubscriberMemberGroupId It is one of the table indexes. Indicates the subscriber ID. The subscriber ID is not unique between different ONTs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.22.1.3
hwSubscriberMemberFlowIndex It is one of the table indexes. Indicates the service port index. The service port indicated by this index must exist in hwExtSrvFlowTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.22.1.4
hwSubscriberMemberOperType Indicates the operation type. Options: 1. add(1) -Add a service port to a subscriber. 2. del(2) -Delete a service port from a subscriber. To add a service port to a subscriber, you must set this leaf to…	Enumerationr/w Enumerated Values: 1 add 2 del	.1.3.6.1.4.1.2011.5.2.22.1.5

Indicates the configuration of the HQoS merge queue profile.
The index of this table is hwMergeQueueProfileIndex.

hwMergeQueueProfileEntry row .1.3.6.1.4.1.2011.5.2.23.1

Indicates the configuration of the HQoS merge queue profile.
The index of this entry is hwMergeQueueProfileIndex.

Indexes

hwMergeQueueProfileIndex

Column	Syntax	OID
hwMergeQueueProfileIndex Indicates the index of the HQoS merge queue profile.	Integer32 Constraints: range: 1-4	.1.3.6.1.4.1.2011.5.2.23.1.1
hwMergeQueueProfileStartQueueId Indicates the start queue ID of the HQoS merge queue.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.2.23.1.2
hwMergeQueueProfileEndQueueId Indicates the end queue ID of the HQoS merge queue.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.2.23.1.3

Indicates the HQoS subscriber queue shaping table. It is used to add, modify, query, or delete configurations of subscriber queue shaping.
The indexes of this table are hwSubscriberProfileName and hwSubscriberQueueShapingQueueId.

hwSubscriberQueueShapingEntry row .1.3.6.1.4.1.2011.5.2.24.1

Indicates the HQoS subscriber queue shaping table. It is used to add, modify, query, or delete configurations of subscriber queue shaping.
The indexes of this entry are hwSubscriberProfileName and hwSubscriberQueueShapi…

Indexes

hwSubscriberProfileName hwSubscriberQueueShapingQueueId

Column	Syntax	OID
hwSubscriberQueueShapingQueueId Indicates the ID of the queue to be shaped in the HQoS subscriber profile. Range: 0-7	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.2011.5.2.24.1.1
hwSubscriberQueueShapingDSTrafficIndex Indicates the index of the IP traffic table referenced by the queue to be shaped in the HQoS subscriber profile. -1 indicates unbinding IP traffic table.	Integer32r/w Constraints: range: -1--1 range: 1-1024	.1.3.6.1.4.1.2011.5.2.24.1.2
hwSubscriberQueueShapingDSTrafficName Indicates the name of the IP traffic table used by downstream packets. The IP traffic table must exist in hwIpTrafficParamTable.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.2.24.1.3

Indicates the LQoS traffic burst detection instance table. It is used to add, modify, query, or delete configurations of a traffic burst detection instance.
The index of this table is hwTrafficBurstDetectInstanceId.

hwTrafficBurstDetectInstanceEntry row .1.3.6.1.4.1.2011.5.2.26.1

Indicates the LQoS traffic burst detection instance table. It is used to add, modify, query, or delete configurations of a traffic burst detection instance.
The index of this entry is hwTrafficBurstDetectInstanceId.

Indexes

hwTrafficBurstDetectInstanceId

Column	Syntax	OID
hwTrafficBurstDetectInstanceId Indicates the index of a traffic burst detection Instance.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.26.1.1
hwTrafficBurstDetectDirection Indicates the direction where an ACL rule for traffic burst detection takes effect when the device delivers an ACL rule to a specified port or a specified slot. Options: 1. invalid(0) -indicates an invalid p…	Enumerationr/w Enumerated Values: 0 invalid 1 inbound 2 outbound	.1.3.6.1.4.1.2011.5.2.26.1.2
hwTrafficBurstDetectPeriod Indicates the period during which the traffic burst detection takes effect. If this node is not configured, the period during which the traffic burst detection is 10ms by default. Range: 1-100. Unit: ms Default: 10	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.2011.5.2.26.1.3
hwTrafficBurstDetectThreshold Indicates the threshold for burst traffic detection. If the burst traffic exceeds this value, a traffic burst record is generated. Range: 64-10240000 kbit/s. Unit: kbit/s.	Integer32r/w Constraints: range: 64-10240000	.1.3.6.1.4.1.2011.5.2.26.1.4
hwTrafficBurstDetectFrameIndex The index of a shelf in the device.	Integer32r/w Constraints: range: -1-1024	.1.3.6.1.4.1.2011.5.2.26.1.5
hwTrafficBurstDetectSlotIndex A slot index is used to identify the location of a board in a shelf. You can locate a board in a shelf according to hwFrameIndex and hwSlotIndex.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.2011.5.2.26.1.6
hwTrafficBurstDetectPortIndex Port index, indicating the physical number of the port on a board.	Integer32r/w Constraints: range: -1-255	.1.3.6.1.4.1.2011.5.2.26.1.7
hwTrafficBurstDetectIfType Indicates the type of traffic burst detection. Options: 1.invalid(-1) --indicates the parameter is invalid 2.port(1) --indicates the traffic burst detection instance is configured on the…	Enumerationr/w Enumerated Values: -1 invalid 1 port 2 linkAggregationGroup 3 protectGroup	.1.3.6.1.4.1.2011.5.2.26.1.8
hwTrafficBurstDetectOntId Indicates the ONT ID.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.26.1.9
hwTrafficBurstDetectOntPortType Indicates the ONT port type. Options: 1. invalid(-1) -indicates this parameter is invalid 2. eth(47) -indicates the eth port	Enumerationr/w Enumerated Values: -1 invalid 47 eth	.1.3.6.1.4.1.2011.5.2.26.1.10
hwTrafficBurstDetectOntPortId Indicates the ONT port ID.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.26.1.11
hwTrafficBurstDetectServiceportIndex Indicats the service port index of traffic burst detection.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.26.1.12
hwTrafficBurstDetectUserAclNum Describes the user-defined ACL rule group that is used when a user-defined ACL rule for traffic burst detection is delivered to a specified port or a specified slot. Range: 0, 5000-5999 Make sure that the user-defined …	Integer32r/w Constraints: range: 0-0 range: 5000-5999	.1.3.6.1.4.1.2011.5.2.26.1.13
hwTrafficBurstDetectUserAclSubitem Describes the user-defined ACL rule that is used when a user-defined ACL rule for traffic burst detection is delivered to a specified port or a specified slot. This leaf must be used together with hwTrafficBurstDetectU…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.26.1.14
hwTrafficBurstDetectIpAclNum Describes the basic or advanced ACL rule group that is used when a basic or advanced ACL rule for traffic burst detection is delivered to a specified port or a specified slot. Range: 0, 2000-3999 Make sure that the bas…	Integer32r/w Constraints: range: 0-0 range: 2000-3999	.1.3.6.1.4.1.2011.5.2.26.1.15
hwTrafficBurstDetectIpAclSubitem Describes the basic or advanced ACL rule that is used when a basic or advanced ACL rule for traffic burst detection is delivered to a specified port. Range: 0-4294967295 Make sure that the basic or advanced ACL rule gr…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.26.1.16
hwTrafficBurstDetectIpv6AclNum Describes the basic or advanced ACL rule group that is used when a basic or advanced ACL rule for traffic burst detection is delivered to a specified port or a specified slot. Range: 0, 2000-3999 Make sure that the bas…	Integer32r/w Constraints: range: 0-0 range: 2000-3999	.1.3.6.1.4.1.2011.5.2.26.1.17
hwTrafficBurstDetectIpv6AclSubitem Describes the basic or advanced ACL rule that is used when a basic or advanced ACL rule for traffic burst detection is delivered to a specified port. Range: 0-4294967295 Make sure that the basic or advanced ACL rule gr…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.26.1.18
hwTrafficBurstDetectLinkAclNum Describes the L2 ACL rule group that is used when an L2 ACL rule for traffic burst detection is delivered to a specified port or a specified slot. Range: 0, 4000-4999 Make sure that the L2 ACL rule group is already cre…	Integer32r/w Constraints: range: 0-0 range: 4000-4999	.1.3.6.1.4.1.2011.5.2.26.1.19
hwTrafficBurstDetectLinkAclSubitem Describes the L2 ACL rule that is used when an L2 ACL rule for traffic burst detection is delivered to a specified port or a specified slot. This leaf must be used together with hwTrafficBurstDetectLinkAclNum, uniquel…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.26.1.20
hwTrafficBurstDetectInstanceState Indicates the state of traffic burst detection. Options: 1.active(1) --indicates the traffic burst detection take effects 2.stop(2) --indicates the traffic burst detection ends 3.idle(3) --indicates the traffic b…	Enumerationr/w Enumerated Values: 1 active 2 stop 3 idle	.1.3.6.1.4.1.2011.5.2.26.1.21
hwTrafficBurstDetectStartTime Indicates the start time of traffic burst detection. If this time is not set, traffic burst detection is enabled immediately by default.	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.5.2.26.1.22
hwTrafficBurstDetectStopTime Indicates the end time of traffic burst detection. If this time is not set, traffic burst detection lasts all the time.	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.2011.5.2.26.1.23
hwTrafficBurstDetectRowStatus Row status, used to query, create, modify, and delete a traffic burst detection table. It supports the active(1), createAndGo(4), and destroy(6) operations. During query, the value of this leaf is always active(1). Dur…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.2.26.1.24
hwTrafficBurstDetectTime Indicates the duration of traffic burst detection. 0 indicates continuous detection, which does not automatically stop. -1 indicates the duration of traffic burst detection is more than 1440min. The duration of burst t…	Integer32r/w Constraints: range: -1-1440	.1.3.6.1.4.1.2011.5.2.26.1.25

Indicates the port shaping table. It is used to add, modify, query, or delete configurations of port shaping.
The index of this table is hwPortShapingIfIndex.

hwPortShapingEntry row .1.3.6.1.4.1.2011.5.2.30.1

Indicates the port shaping table. It is used to add, modify, query, or delete configurations of port shaping.
The index of this entry is hwPortShapingIfIndex.

Indexes

hwPortShapingIfIndex

Column	Syntax	OID
hwPortShapingIfIndex It is one of the table indexes. Specifies the index of a port for port shaping. It uniquely identifies a port. The value and algorithm are the same as those of ifIndexes.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.30.1.1
hwPortShapingOutboundTrafficTableId Indicates the index of the IP traffic table referenced by the port to be shaped. -1 indicates unbinding IP traffic table.	Integer32r/w Constraints: range: -1--1 range: 1-1024	.1.3.6.1.4.1.2011.5.2.30.1.2
hwPortShapingOutboundTrafficTableName Indicates the name of the IP traffic table referenced by the port to be shaped. The IP traffic table must exist in hwIpTrafficParamTable.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.2.30.1.3

Indicates the port vs down stream traffic table. It is used to add, query, 
modify or delete a port vs down stream traffic table.
The indexes of this table are hwPortVsRateLimitIfIndex and hwPortVsRateLimitVsname.

hwPortVsRateLimitEntry row .1.3.6.1.4.1.2011.5.2.34.1

Indicates the port vs down stream traffic table. It is used to add, query,
modify or delete a port vs down stream traffic table.
The indexes of this entry are hwPortVsRateLimitIfIndex and hwPortVsRateLimitVsname.

Indexes

hwPortVsRateLimitIfIndex hwPortVsRateLimitVsname

Column	Syntax	OID
hwPortVsRateLimitIfIndex It is one of the table indexes. Specifies the index of a port for port vs traffic limitation. It uniquely identifies a port. The value and algorithm are the same as those of ifIndexes.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.2011.5.2.34.1.1
hwPortVsRateLimitVsname It is one of the table indexes. Indicates the vs name.	OctetString Constraints: range: 0-31	.1.3.6.1.4.1.2011.5.2.34.1.2
hwPortVsRateLimitDSTrafficTableId Indicates the down stream traffic table ID.	Integer32r/w Constraints: range: 1-1024	.1.3.6.1.4.1.2011.5.2.34.1.3
hwPortVsRateLimitDSTrafficTableName Indicates the down stream traffic table name.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.2011.5.2.34.1.4
hwPortVsRateLimitRowStatus Indicates the row status. Options: 1. active(1) -when this leaf is queried, the value is fixed to active(1). 2. createAndGo(4) -deliver a traffic table ID to a port vs. 3. destroy(6) -delete a port vs traffic…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.2011.5.2.34.1.5

Indicates the port CIR bandwidth table. It is used to set a port max CIR bandwidth limitation,
query max CIR bandwidth and used CIR bandwitdh of a port.
The index of this table is hwPortMaxCirBandWidthIfIndex.

hwPortMaxCirBandWidthEntry row .1.3.6.1.4.1.2011.5.2.35.1

Indicates the port CIR bandwidth table. It is used to set a port max CIR bandwidth limitation,
query max CIR bandwidth and used CIR bandwidth of a port.
The index of this entry is hwPortMaxCirBandWidthIfIndex.

Indexes

hwPortMaxCirBandWidthIfIndex

Column	Syntax	OID
hwPortMaxCirBandWidthIfIndex The index of the table. Specifies the index of a port for port CIR bandwidth.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.2011.5.2.35.1.1
hwPortMaxCirBandWidthChannel2dot5GLimit Indicates max CIR bandwidth of channel 2.5G on a port. Unit: Kbps. -1 indicates not limit.	Integer32r/w Constraints: range: -1--1 range: 64-2500000	.1.3.6.1.4.1.2011.5.2.35.1.2
hwPortMaxCirBandWidthChannel10GLimit Indicates max CIR bandwidth of channel 10G on a port. Unit: Kbps. -1 indicates not limit.	Integer32r/w Constraints: range: -1--1 range: 64-10000000	.1.3.6.1.4.1.2011.5.2.35.1.3
hwPortMaxCirBandWidthChannel2dot5GUsed Indicates used CIR bandwidth of channel 2.5G on a port. Unit: Kbps.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.2.35.1.4
hwPortMaxCirBandWidthChannel10GUsed Indicates used CIR bandwidth of channel 10G on a port. Unit: Kbps.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.2011.5.2.35.1.5