HP-SN-MPLS-LSR-MIB Table View

This table specifies per-interface MPLS capability
and associated information.

mplsInterfaceConfEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1

An entry in this table is created by an LSR for
every interface capable of supporting MPLS. Each
entry in this table will exist only if a
corresponding entry in ifTable exists. If the
associated entry in ifTable is dele…

Indexes

mplsInterfaceConfIndex

Column	Syntax	OID
mplsInterfaceConfIndex This is a unique index for an entry in the MplsInterfaceConfTable. A non-zero index for an entry indicates the ifIndex for the corresponding interface entry in of the MPLS-layer in the ifTable. Note that the per-platfo…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.1
mplsInterfaceLabelMinIn This is the minimum value of an MPLS label that this LSR is willing to receive on this interface.	HP-SN-MPLS-TC-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.2
mplsInterfaceLabelMaxIn This is the maximum value of an MPLS label that this LSR is willing to receive on this interface.	HP-SN-MPLS-TC-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.3
mplsInterfaceLabelMinOut This is the minimum value of an MPLS label that this LSR is willing to send on this interface.	HP-SN-MPLS-TC-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.4
mplsInterfaceLabelMaxOut This is the maximum value of an MPLS label that this LSR is willing to send on this interface.	HP-SN-MPLS-TC-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.5
mplsInterfaceTotalBandwidth This value indicates the total amount of usable bandwidth on this interface and is specified in kilobits per second (Kbps). This variable is not applicable when applied to the interface with index 0. When this value ca…	HP-SN-MPLS-TC-MIBMplsBitRate Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.6
mplsInterfaceAvailableBandwidth This value indicates the total amount of available bandwidth available on this interface and is specified in kilobits per second (Kbps). This value is calculated as the difference between the amount of bandwidth curren…	HP-SN-MPLS-TC-MIBMplsBitRate Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.7
mplsInterfaceLabelParticipationType Either the perPlatform(0) or perInterface(1) bit MUST be set. If the value of the mplsInterfaceConfIndex for this entry is zero, then only the perPlatform(0) bit MUST be set and the perInterface(1) bit is meaningless. I…	Bits Enumerated Values: 0 perPlatform 1 perInterface	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.8

This table provides MPLS performance information on
a per-interface basis.

mplsInterfacePerfEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1

An entry in this table is created by the LSR for
every interface capable of supporting MPLS. Its is
an extension to the mplsInterfaceConfEntry table.

Indexes

No indexes recorded

Column	Syntax	OID
mplsInterfaceInLabelsUsed This object counts the number of labels that are in use at this point in time on this interface in the incoming direction. If the interface participates in the per-platform label space only, then this instance of this o…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.1
mplsInterfaceFailedLabelLookup This object counts the number of labeled packets that have been received on this interface and were discarded because there was no matching cross- connect entry. This object MUST count on a per- interface basis regardle…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.2
mplsInterfaceOutLabelsUsed This object counts the number of top-most labels in the outgoing label stacks that are in use at this point in time on this interface. This object MUST count on a per-interface basis regardless of which label space the …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.3
mplsInterfaceOutFragments This object counts the number of outgoing MPLS packets that required fragmentation before transmission on this interface. This object MUST count on a per-interface basis regardless of which label space the interface par…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.4

This table contains a collection of incoming
segments to an LSR.

mplsInSegmentEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1

An entry in this table represents one incoming
segment. An entry can be created by a network
administrator or an SNMP agent, or an MPLS signaling
protocol. The creator of the entry is denoted by
mplsInSegmentOwner. A…

Indexes

mplsInSegmentIfIndex mplsInSegmentLabel

Column	Syntax	OID
mplsInSegmentIfIndex This is a unique index for an entry in the MplsInSegmentTable. This value represents the interface index for the incoming MPLS interface. A value of zero represents an incoming label from the per-platform label space.…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.1
mplsInSegmentLabel The incoming label for this segment.	HP-SN-MPLS-TC-MIBMplsLabel Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.2
mplsInSegmentNPop The number of labels to pop from the incoming packet. Normally only the top label is popped from the packet and used for all switching decisions for that packet. Note that technologies which do not support label poppi…	Integer32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.3
mplsInSegmentAddrFamily The IANA address family [IANAFamily] of the incoming packet. A value of other(0) indicates that the family type is either unknown or undefined. This object cannot be modified if mplsInSegmentRowStatus is active(1).	IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbersr/w Type Values: 0 other 1 ipV4 2 ipV6 3 nsap 4 hdlc 5 bbn1822 6 all802 7 e163 8 e164 9 f69 10 x121 11 ipx 12 appleTalk 13 decnetIV 14 banyanVines 15 e164withNsap 16 dns 17 distinguishedName 18 asNumber 19 xtpOverIpv4 20 xtpOverIpv6 21 xtpNativeModeXTP 22 fibreChannelWWPN 23 fibreChannelWWNN 24 gwid 25 afi 26 mplsTpSectionEndpointIdentifier 27 mplsTpLspEndpointIdentifier 28 mplsTpPseudowireEndpointIdentifier 29 mtipmultitopologyipversion4 30 mtipv6multitopologyipversion6 31 bgpSfc 16384 eigrpCommonServiceFamily 16385 eigrpIpv4ServiceFamily 16386 eigrpIpv6ServiceFamily 16387 lispCanonicalAddressFormat 16388 bgpLs 16389 fortyeightBitMac 16390 sixtyfourBitMac 16391 oui 16392 mac24 16393 mac40 16394 ipv664 16395 rBridgePortID 16396 trillNickname 16397 universallyUniqueIdentifier 16398 routingPolicyAfi 16399 mplsNamespaces 65535 reserved	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.4
mplsInSegmentXCIndex Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is create…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.5
mplsInSegmentOwner Denotes the entity that created and is responsible for managing this segment. This object cannot be modified if mplsInSegmentRowStatus is active(1).	HP-SN-MPLS-TC-MIBMplsInitialCreationSourcer/w Type Values: 1 other 2 snmp 3 ldp 4 rsvp 5 crldp 6 policyAgent 7 unknown	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.6
mplsInSegmentTrafficParamPtr This variable represents a pointer to the traffic parameter specification for this in-segment. This value may point at an entry in the mplsTrafficParamTable to indicate which mplsTrafficParamEntry is to be assigned to …	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.7
mplsInSegmentRowStatus This variable is used to create, modify, and/or delete a row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.8
mplsInSegmentStorageType This variable indicates the storage type for this object. This object cannot be modified if mplsInSegmentRowStatus is active(1). If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then …	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.9

This table contains statistical information for
incoming MPLS segments to an LSR.

mplsInSegmentPerfEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1

An entry in this table contains statistical
information about one incoming segment which was
configured in the mplsInSegmentTable. The counters
in this entry should behave in a manner similar to
that of the interface.

Indexes

No indexes recorded

Column	Syntax	OID
mplsInSegmentOctets This value represents the total number of octets received by this segment.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.1
mplsInSegmentPackets Total number of packets received by this segment.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.2
mplsInSegmentErrors The number of errored packets received on this segment.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.3
mplsInSegmentDiscards The number of labeled packets received on this in- segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a labele…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.4
mplsInSegmentHCOctets The total number of octets received. This is the 64 bit version of mplsInSegmentOctets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.5
mplsInSegmentPerfDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization o…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.6

This table contains a representation of the outgoing
segments from an LSR.

mplsOutSegmentEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1

An entry in this table represents one outgoing
segment. An entry can be created by a network
administrator or an SNMP agent, or an MPLS signaling
protocol. The object mplsOutSegmentOwner indicates
the creator of this …

Indexes

mplsOutSegmentIndex

Column	Syntax	OID
mplsOutSegmentIndex This value contains a unique index for this row. While a value of 0 is not valid as an index for this row it can be supplied as a valid value to index mplsXCTable to access entries for which no out- segment has been con…	Unsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.1
mplsOutSegmentIfIndex This value must contain the interface index of the outgoing interface. This object may only take the value of 0 during the create-and-wait row creation operation if the management station has not yet set the value of th…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.2
mplsOutSegmentPushTopLabel This value indicates whether or not a top label should be pushed onto the outgoing packet's label stack. The value of this variable MUST be set to true if the outgoing interface does not support pop- and-go (for exampl…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.3
mplsOutSegmentTopLabel If mplsOutSegmentPushTopLabel is true then this represents the label that should be pushed onto the top of the outgoing packet's label stack. Otherwise this value SHOULD be set to 0 by the management station and MUST be…	HP-SN-MPLS-TC-MIBMplsLabelr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.4
mplsOutSegmentNextHopIpAddrType Indicates whether the next hop address is IPv4 or IPv6. Note that a value of unknown (0) is valid only when the outgoing interface is of type point-to- point. This object cannot be modified if mplsOutSegmentRowStatus i…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.5
mplsOutSegmentNextHopIpv4Addr IPv4 Address of the next hop. Its value is significant only when mplsOutSegmentNextHopIpAddrType is ipV4 (1), otherwise it SHOULD return a value of 0. This object cannot be modified if mplsOutSegmentRowStatus is active…	INET-ADDRESS-MIBInetAddressIPv4r/w Type Constraints: range: 4	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.6
mplsOutSegmentNextHopIpv6Addr IPv6 address of the next hop. Its value is significant only when mplsOutSegmentNextHopIpAddrType is ipV6 (2), otherwise it SHOULD return a value of 0. This object cannot be modified if mplsOutSegmentRowStatus is active…	INET-ADDRESS-MIBInetAddressIPv6r/w Type Constraints: range: 16	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.7
mplsOutSegmentXCIndex Index into mplsXCTable which identifies which cross- connect entry this segment is part of. A value of zero indicates that this entry is not referred to by any cross-connect entry. When a cross-connect entry is create…	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.8
mplsOutSegmentOwner Denotes the entity which created and is responsible for managing this segment. This object cannot be modified if mplsOutSegmentRowStatus is active(1).	HP-SN-MPLS-TC-MIBMplsInitialCreationSourcer/w Type Values: 1 other 2 snmp 3 ldp 4 rsvp 5 crldp 6 policyAgent 7 unknown	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.9
mplsOutSegmentTrafficParamPtr This variable represents a pointer to the traffic parameter specification for this out-segment. This value may point at an entry in the mplsTrafficParamTable to indicate which mplsTrafficParamEntry is to be assigned to…	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.10
mplsOutSegmentRowStatus For creating, modifying, and deleting this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.11
mplsOutSegmentStorageType This variable indicates the storage type for this object. This object cannot be modified if mplsOutSegmentRowStatus is active(1). If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.12

This table contains statistical information about
outgoing segments from an LSR. The counters in this
entry should behave in a manner similar to that of
the interface.

mplsOutSegmentPerfEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1

An entry in this table contains statistical
information about one outgoing segment configured in
mplsOutSegmentTable.

Indexes

No indexes recorded

Column	Syntax	OID
mplsOutSegmentOctets This value contains the total number of octets sent on this segment.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.1
mplsOutSegmentPackets This value contains the total number of packets sent on this segment.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.2
mplsOutSegmentErrors Number of packets that could not be sent due to errors on this segment.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.3
mplsOutSegmentDiscards The number of labeled packets received on this out- segment, which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a label…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.4
mplsOutSegmentHCOctets Total number of octets sent. This is the 64 bit version of mplsOutSegmentOctets.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.5
mplsOutSegmentPerfDiscontinuityTime The value of sysUpTime on the most recent occasion at which any one or more of this segment's Counter32 or Counter64 suffered a discontinuity. If no such discontinuities have occurred since the last re- initialization o…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.6

This table specifies information for switching
between LSP segments.  It supports point-to-point,
point-to-multipoint and multipoint-to-point
connections.  mplsLabelStackTable specifies the
label stack information for a cross-connect LSR and
is referred to from mplsXCTable.

mplsXCEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1

A row in this table represents one cross-connect
entry. The following objects index it:

- cross-connect index mplsXCIndex that uniquely
identifies a group of cross-connect entries
- interface index of th…

Indexes

mplsXCIndex mplsInSegmentIfIndex mplsInSegmentLabel mplsOutSegmentIndex

Column	Syntax	OID
mplsXCIndex Primary index for the conceptual row identifying a group of cross-connect segments.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.1
mplsXCLspId This value identifies the label switched path that this cross-connect entry belongs to. This object cannot be modified if mplsXCRowStatus is active(1).	HP-SN-MPLS-TC-MIBMplsLSPIDr/w Type Constraints: range: 0..31	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.2
mplsXCLabelStackIndex Primary index into mplsLabelStackTable identifying a stack of labels to be pushed beneath the top label. Note that the top label identified by the out- segment ensures that all the components of a multipoint-to-point co…	Unsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.3
mplsXCIsPersistent Denotes whether or not this cross-connect entry and associated in- and out-segments should be restored automatically after failures. This value MUST be set to false in cases where this cross-connect entry was created b…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.4
mplsXCOwner Denotes the entity that created and is responsible for managing this cross-connect. This object cannot be modified if mplsXCRowStatus is active(1).	HP-SN-MPLS-TC-MIBMplsInitialCreationSourcer/w Type Values: 1 other 2 snmp 3 ldp 4 rsvp 5 crldp 6 policyAgent 7 unknown	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.5
mplsXCRowStatus For creating, modifying, and deleting this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.6
mplsXCStorageType Defines the storage type for this object. This object cannot be modified if mplsXCRowStatus is active(1). If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove t…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.7
mplsXCAdminStatus The desired operational status of this segment.	Enumerationr/w Enumerated Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.8
mplsXCOperStatus The actual operational status of this cross- connect.	Enumeration Enumerated Values: 1 up 2 down 3 testing 4 unknown 5 dormant 6 notPresent 7 lowerLayerDown	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.9

This table specifies the label stack to be pushed
onto a packet, beneath the top label.  Entries into
this table are referred to from mplsXCTable.

mplsLabelStackEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1

An entry in this table represents one label which is
to be pushed onto an outgoing packet, beneath the
top label. An entry can be created by a network
administrator or by an SNMP agent as instructed by
an MPLS signalin…

Indexes

mplsLabelStackIndex mplsLabelStackLabelIndex

Column	Syntax	OID
mplsLabelStackIndex Primary index for this row identifying a stack of labels to be pushed on an outgoing packet, beneath the top label.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.1
mplsLabelStackLabelIndex Secondary index for this row identifying one label of the stack. Note that an entry with a smaller mplsLabelStackLabelIndex would refer to a label higher up the label stack and would be popped at a downstream LSR befor…	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.2
mplsLabelStackLabel The label to pushed.	HP-SN-MPLS-TC-MIBMplsLabelr/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.3
mplsLabelStackRowStatus For creating, modifying, and deleting this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.4
mplsLabelStackStorageType Defines the storage type for this object. If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this row shortly thereafter.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.5

This table specifies the Traffic Parameter objects
for in and out-segments.

mplsTrafficParamEntry row .1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1

An entry in this table represents the TrafficParam
objects for one or more in or out segments. A
single entry can be pointed to by multiple segments
indicating resource sharing.

Indexes

mplsTrafficParamIndex

Column	Syntax	OID
mplsTrafficParamIndex Uniquely identifies this row of the table. Note that zero represents an invalid index.	Unsigned32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.1
mplsTrafficParamMaxRate Maximum rate in kilobits/second.	kilobits per secondHP-SN-MPLS-TC-MIBMplsBitRater/w Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.2
mplsTrafficParamMeanRate Mean rate in kilobits/second.	kilobits per secondHP-SN-MPLS-TC-MIBMplsBitRater/w Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.3
mplsTrafficParamMaxBurstSize Maximum burst size in bytes.	bytesHP-SN-MPLS-TC-MIBMplsBurstSizer/w Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.4
mplsTrafficParamRowStatus For creating, modifying, and deleting this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.5
mplsTrafficParamStorageType The storage type for this object. If this variable is set to readOnly(5), and the corresponding TFIB entry is removed, then the agent must remove this row shortly thereafter.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.6