HP-SN-MPLS-LSR-MIB
This MIB contains managed object definitions for the
Multiprotocol Label Switching (MPLS) Router as
defined in: Rosen, E., Viswanathan, A., and R.
Callon, Multiprotocol Label Switching Architecture,
RFC 3031, January 2001.
- Source file
HP-SN-MPLS-LSR-MIB- Last revised
- Identity
mplsLsrMIB- Base OID
1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2
Imported Objects
| HP-SN-MPLS-TC-MIB | MplsBitRate MplsBurstSize MplsInitialCreationSource MplsLabel MplsLSPID mplsMIB |
| HP-SN-ROOT-MIB | snMpls |
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddressIPv4 InetAddressIPv6 InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32 |
| SNMPv2-TC | RowPointer RowStatus StorageType TimeStamp TruthValue |
Net-SNMP examples using the hp MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'HP-SN-MPLS-LSR-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'HP-SN-MPLS-LSR-MIB::mplsLsrMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'HP-SN-MPLS-LSR-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'HP-SN-MPLS-LSR-MIB::mplsLsrMIB'
Objects (96)
Showing 96 of 96 objects
Object legend
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.1 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.2 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.3 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.4 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.5 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.6 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.7 |
||
|
Bits
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.1.1.8 |
|
|
Integer32
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.10 |
|
|
Unsigned32
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.11 |
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.1 |
|
|
Unsigned32
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.2 |
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.3 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.4 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.12.1.5 |
||
|
Unsigned32
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.13 |
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.1 |
|
|
kilobits per secondHP-SN-MPLS-TC-MIBMplsBitRate
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.2 |
|
|
kilobits per secondHP-SN-MPLS-TC-MIBMplsBitRate
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.3 |
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.4 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.5 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.14.1.6 |
||
|
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.15 |
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.1 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.2 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.3 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.2.1.4 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.1 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.2 |
||
|
Integer32
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.3 |
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.4 |
||
|
Unsigned32
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.5 |
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.6 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.7 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.8 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.3.1.9 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.1 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.2 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.3 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.4 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.5 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.4.1.6 |
||
|
Unsigned32
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.5 |
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.1 |
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.10 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.11 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.12 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.2 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.3 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.4 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.5 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.6 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.7 |
||
|
Unsigned32
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.8 |
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.6.1.9 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.1 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.2 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.3 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.4 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.5 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.7.1.6 |
||
|
Unsigned32
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.8 |
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1 |
||
|
Unsigned32
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.1 |
|
|
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.2 |
|
|
Unsigned32
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.3 |
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.4 |
||
|
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.5 |
|
|
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.6 |
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.7 |
||
|
Enumeration
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.8 |
|
|
Enumeration
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.1.9.1.9 |
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2.0 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1 |
||
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.2 |
Dependencies (13) 8 direct · 5 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- RFC1155-SMIrfc
- HP-SN-ROOT-MIBhp
- SNMPv2-SMIrfc
- SNMPv2-TCrfc
- IANAifType-MIBrfc
- RFC-1212rfc
- RFC1213-MIBrfc
- HP-SN-MPLS-TC-MIBhp
- IANA-ADDRESS-FAMILY-NUMBERS-MIBrfc
- SNMPv2-CONFrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- INET-ADDRESS-MIBrfc
- HP-SN-MPLS-LSR-MIBhpselected
Conformance Groups (14)
|
mplsInterfaceLabelMinIn mplsInterfaceLabelMaxIn mplsInterfaceLabelMinOut mplsInterfaceLabelMaxOut mplsInterfaceTotalBandwidth mplsInterfaceAvailableBandwidth mplsInterfaceLabelParticipationType
Collection of objects needed for MPLS interface
configuration and performance information. |
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.1
|
|
|
mplsInSegmentNPop mplsInSegmentAddrFamily mplsInSegmentXCIndex mplsInSegmentOctets mplsInSegmentDiscards mplsInSegmentOwner mplsInSegmentRowStatus mplsInSegmentStorageType mplsInSegmentTrafficParamPtr
Collection of objects needed to implement an in-
segment. |
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.2
|
|
|
mplsOutSegmentIndexNext mplsOutSegmentIfIndex mplsOutSegmentPushTopLabel mplsOutSegmentTopLabel mplsOutSegmentNextHopIpAddrType mplsOutSegmentNextHopIpv4Addr mplsOutSegmentNextHopIpv6Addr mplsOutSegmentXCIndex mplsOutSegmentOwner mplsOutSegmentOctets mplsOutSegmentDiscards mplsOutSegmentErrors mplsOutSegmentRowStatus mplsOutSegmentStorageType mplsOutSegmentTrafficParamPtr
Collection of objects needed to implement an out-
segment. |
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.3
|
|
|
mplsXCIndexNext mplsXCLabelStackIndex mplsXCOwner mplsXCAdminStatus mplsXCOperStatus mplsXCRowStatus mplsXCTrapEnable mplsXCStorageType
Collection of objects needed to implement a
cross-connect entry. |
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.4
|
|
|
Collection of optional objects for implementing
a cross-connect entry. |
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.5
|
|
|
mplsInSegmentOctets mplsInSegmentPackets mplsInSegmentErrors mplsInSegmentDiscards mplsOutSegmentOctets mplsOutSegmentPackets mplsOutSegmentDiscards mplsInterfaceInLabelsUsed mplsInterfaceFailedLabelLookup mplsInterfaceOutFragments mplsInterfaceOutLabelsUsed
Collection of objects providing performance
information about an LSR. |
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.6
|
|
|
Object(s) providing performance information
specific to out-segments for which the object mplsInterfaceInOctets wraps around too quickly. |
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.7
|
|
|
Object(s) providing performance information
specific to out-segments for which the object mplsInterfaceOutOctets wraps around too quickly. |
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.8
|
|
|
mplsTrafficParamIndexNext mplsTrafficParamMaxRate mplsTrafficParamMeanRate mplsTrafficParamMaxBurstSize mplsTrafficParamRowStatus mplsTrafficParamStorageType
Object(s) required for supporting QoS resource
reservation. |
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.9
|
|
|
Objects needed to support persistent cross-
connects. |
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.10
|
|
|
Objects needed to support non-persistent cross-
connects. |
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.11
|
|
|
mplsLabelStackLabel mplsLabelStackRowStatus mplsLabelStackStorageType mplsMaxLabelStackDepth mplsLabelStackIndexNext
Objects needed to support label stacking.
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.12
|
|
|
A collection of objects providing information
specific to segment discontinuities.. |
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.13
|
|
|
Set of notifications implemented in this module.
None is mandatory. |
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.1.14
|
Compliance Statements (1)
OID
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.3.2.1Compliance statement for agents that support the
MPLS LSR MIB.
MPLS LSR MIB.
Required groups
| mandatory | mplsInSegmentGroup | |
| mandatory | mplsOutSegmentGroup | |
| mandatory | mplsXCGroup | |
| mandatory | mplsInterfaceGroup | |
| mandatory | mplsPerfGroup | |
| mandatory | mplsSegmentDiscontinuityGroup | |
| optional | mplsHCInSegmentPerfGroup |
This group is mandatory for those in-segment entries for which the object mplsInSegmentOutOctets wraps around too quickly. |
| optional | mplsHCOutSegmentPerfGroup |
This group is mandatory for those out-segment entries for which the object mplsOutSegmentOctets wraps around too quickly. |
| optional | mplsTrafficParamGroup |
This group is mandatory for those LSRs that support QoS resource reservation. |
| optional | mplsXCIsPersistentGroup |
This group is mandatory for devices which support persistent cross-connects. The following constraints apply: mplsXCIsPersistent must at least be read-only returning true(2). |
| optional | mplsXCIsNotPersistentGroup |
This group is mandatory for devices which support non-persistent cross-connects. The following constraints apply: mplsXCIsPersistent must at least be read-only returning false(1). |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| mplsInSegmentXCIndex | Write access is not required. | ||
| mplsInSegmentNPop | readonly | Write access is not required. This object should be set to 1 if it is read-only. |
|
| mplsInSegmentAddrFamily | Write access is not required. A <value of other(0) should be supported because there may be cases where the agent may not know about or support any address types. |
||
| mplsInSegmentStorageType | readonly |
other(1)
|
Only other(1) needs to be supported. |
| mplsOutSegmentIfIndex | readonly | Write access is not required. | |
| mplsOutSegmentPushTopLabel | readonly | Write access is not required. | |
| mplsOutSegmentTopLabel | readonly | Write access is not required. | |
| mplsOutSegmentNextHopIpAddrType | readonly | ipV6(3) need not be supported. | |
| mplsOutSegmentNextHopIpv4Addr | readonly | Write access is not required. | |
| mplsOutSegmentNextHopIpv6Addr | readonly | Write access is not required. | |
| mplsOutSegmentRowStatus | readonly |
active(1), notInService(2), createAndGo(4), destroy(6)
|
The notReady(3) and createAndWait(5) states need not be supported. |
| mplsOutSegmentStorageType | readonly |
other(1)
|
Only other(1) needs to be supported. |
| mplsXCLabelStackIndex | readonly | Write access is not required. | |
| mplsXCIsPersistent | readonly | Write access is not required. | |
| mplsXCAdminStatus | readonly |
Enumeration
up(1), down(2)
|
A value of testing(3) need not be supported. |
| mplsXCOperStatus |
Enumeration
up(1), down(2)
|
Only up(1) and down(2) need to be supported. | |
| mplsXCRowStatus | readonly |
active(1), notInService(2), createAndGo(4), destroy(6)
|
The notReady(3) and createAndWait(5) states need not be supported. |
| mplsXCStorageType | readonly |
other(1)
|
Only other(1) needs to be supported. |
Notifications / Traps (2)
| Name | OID | Description |
|---|---|---|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2.0.1 |
This notification is generated when the
mplsXCOperStatus object for one or more contiguous entries in mplsXCTable are about to enter the up(1) state from some other. The included values of mplsXCOperStatus MUST both be set equal to this other state. The two instances of mplsXCOperStatus in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of cross-connects have transitioned into the up(1) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single cross-connect entry, then the instance identifier (and values) of the two mplsXCOperStatus objects MUST be the identical. |
|
.1.3.6.1.4.1.11.2.3.7.11.12.2.15.15.2.2.0.2 |
This notification is generated when the
mplsXCOperStatus object for one or more contiguous entries in mplsXCTable are about to enter the down(2) state from some other. The included values of mplsXCOperStatus MUST both be set equal to this other state. The two instances of mplsXCOperStatus in this notification indicate the range of indexes that are affected. Note that all the indexes of the two ends of the range can be derived from the instance identifiers of these two objects. For cases where a contiguous range of cross-connects have transitioned into the down(2) state at roughly the same time, the device SHOULD issue a single notification for each range of contiguous indexes in an effort to minimize the emission of a large number of notifications. If a notification has to be issued for just a single cross-connect entry, then the instance identifier (and values) of the two mplsXCOperStatus objects MUST be the identical. |