HMRING-MGMT-SNMP-MIB Table View

This table contains variables to define
an entry in the ring redundancy database.

hmRingRedEntry row .1.3.6.1.4.1.248.14.5.1.1

The entry of the hmRingRedTable.

Indexes

hmRingRedPrimGroupID hmRingRedPrimIfIndex

Column	Syntax	OID
hmRingRedPrimGroupID Unique index to identify the slot number of the primary link port. This value is never greater than hmSysGroupCapacity. Note that row creation is done only by writing to hmRingRedMode	Integer32 Constraints: range: 1-5	.1.3.6.1.4.1.248.14.5.1.1.1
hmRingRedPrimIfIndex Interface index of the primary link. Note that row creation is only done by writing to hmRingRedMode	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.248.14.5.1.1.2
hmRingRedPrimIfOpState operational state of the primary interface.	Enumeration Enumerated Values: 1 not-available 2 active 3 inactive	.1.3.6.1.4.1.248.14.5.1.1.3
hmRingRedRedGroupID Unique index to identify the slot number of the redundant link port. This value is never greater than hmSysGroupCapacity.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.1.1.4
hmRingRedRedIfIndex Interface index of the redundant link.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.1.1.5
hmRingRedRedIfOpState operational state of the redundant interface.	Enumeration Enumerated Values: 1 not-available 2 active 3 inactive	.1.3.6.1.4.1.248.14.5.1.1.6
hmRingRedOperState operational state of an entry. If a new entry is created by setting hmRingRedMode to create(1), the operState returns a value of underCreation(1). rmActive(2) indicates that redundancy-manager is configured and a ring …	Enumeration Enumerated Values: 1 underCreation 2 rmActive 3 rmInactive 4 rs 5 disable	.1.3.6.1.4.1.248.14.5.1.1.7
hmRingRedMode Desired mode of operation. To create, modify or deactivate an entry the value create(1) have to be set. delete(2) removes the entry. rm(3) and rs(4) activate the redundancy.	Enumerationr/w Enumerated Values: 1 create 2 delete 3 rm 4 rs 5 disable	.1.3.6.1.4.1.248.14.5.1.1.8
hmRingRedConfigOperState Operational state of the ring configuration. rmConfigError(2) indicates that the ring is not connected with both ringports of the redundancy manager, one of the ring cables is connected to another port …	Enumeration Enumerated Values: 1 noError 2 rmConfigError 3 ringConfigError 4 anotherRM	.1.3.6.1.4.1.248.14.5.1.1.9
hmRingRedRecoveryDelay The hmRingRedRecoveryDelay with its parameter set defines the maximum recovery delay of ring recovery in the HIPER Ring. delay500(1) specifies the parameter set for the maximum recovery delay of 500ms in the HIPER Ring…	Enumerationr/w Enumerated Values: 1 delay500 2 delay300	.1.3.6.1.4.1.248.14.5.1.1.10

This table contains variables to define
an entry in the ring coupling database.

hmRingCouplingEntry row .1.3.6.1.4.1.248.14.5.2.1

The entry of the hmRingCouplingTable.

Indexes

hmRingCplInterconnGroupID hmRingCplInterconnIfIndex

Column	Syntax	OID
hmRingCplInterconnGroupID Unique index to identify the slot number of the coupling link port. This value is never greater than hmSysGroupCapacity. Note that row creation is done only by writing to hmRingCplRowStatus.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.2.1.1
hmRingCplInterconnIfIndex Interface index of the coupling link. Note that only those ports can be chosen which do not belong to another L2 redundancy mechanism like ring redundancy or dual homing and that row creation is only done by writing to …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.2.1.2
hmRingCplInterconnIfOpState Operational state of the coupling interface. active(2) indicates that the port is switching. standby(3) indicates that the port is in standby mode. On the slave active(2) indicates that a ring coupling failure has occur…	Enumeration Enumerated Values: 1 not-connected 2 active 3 standby	.1.3.6.1.4.1.248.14.5.2.1.3
hmRingCplControlGroupID Unique index to identify the slot number of the control link port in case of outband-control. This value is never greater than hmSysGroupCapacity.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.2.1.4
hmRingCplControlIfIndex Interface index of the control link in case of outband-control. Note that only those ports can be chosen which do not belong to another L2 redundancy mechanism like ring redundancy or dual homing and that row creation …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.2.1.5
hmRingCplControlIfOpState Operational state of the control interface in case of outband-control.	Enumeration Enumerated Values: 1 not-connected 2 active 3 standby	.1.3.6.1.4.1.248.14.5.2.1.6
hmRingCplControlMode Control mode of the ring coupling which can only be chosen by the slave, the master just reports his current control mode. unknown(3) cannot be set. In outband(1) mode an additional line must connect the control interf…	Enumerationr/w Enumerated Values: 1 outband 2 inband 3 unknown 4 local 5 disable	.1.3.6.1.4.1.248.14.5.2.1.7
hmRingCplPartnerIpAddr IP Address of the partner in the ring coupling.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.248.14.5.2.1.8
hmRingCplPartnerInterconnGroupID Index identifies the slot number of the coupling link port of the partner in the ring coupling. This variable can only be set if the hmRingCplControlMode is local(4).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.2.1.9
hmRingCplPartnerInterconnIfIndex Interface index identifies the coupling link of the partner in the ring coupling. This variable can only be set if the hmRingCplControlMode is local(4).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.2.1.10
hmRingCplPartnerInterconnIfOpState Operational state of the coupling interface of the partner in the ring coupling. active(2) indicates that the partner port is switching. standby(3) indicates that the partner port is in standby mode.	Enumeration Enumerated Values: 1 not-connected 2 active 3 standby	.1.3.6.1.4.1.248.14.5.2.1.11
hmRingCplOperState Operational state of an entry. If a new entry is created by setting hmRingCplRowStatus to create(1), the operState returns a value of underCreation(1). slave(2) indicates that switch is configured to be the slave of the…	Enumeration Enumerated Values: 1 underCreation 2 slave 3 master 4 local 5 disable	.1.3.6.1.4.1.248.14.5.2.1.12
hmRingCplMode Desired mode of operation. slaveOn(2) activates the slave. slaveOff(1) deactivates the slave, the ring coupling is disabled and the switch acts from now in normal rs mode. Note that this mode can only be set if the slav…	Enumerationr/w Enumerated Values: 1 slaveOff 2 slaveOn 3 disable	.1.3.6.1.4.1.248.14.5.2.1.13
hmRingCplRowStatus Defines the status of a ring coupling database entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.14.5.2.1.14
hmRingCplConfigOperState Operational state of the ring coupling configuration. slaveCouplingLinkError(2) indicates that the coupling link is not connected with the coupling port of the slave but with another port of the slave…	Enumeration Enumerated Values: 1 noError 2 slaveCouplingLinkError 3 slaveControlLinkError 4 masterControlLinkError 5 twoSlaves 6 localPartnerLinkError 7 localInvalidCouplingPort 8 couplingPortNotAvailable 9 controlPortNotAvailable 10 partnerPortNotAvailable	.1.3.6.1.4.1.248.14.5.2.1.15
hmRingCplCouplingLinks Maximum coupling links between two coupled rings in case of a failure in one of the coupled rings. If there is no connection starting from the switch in slave or local operational state over the route of…	Enumerationr/w Enumerated Values: 1 basicRedundancy 2 extendedRedundancy	.1.3.6.1.4.1.248.14.5.2.1.16
hmRingCplExtendedDiag Additional operational states detected by the slave or in local mode. basicRedundancyInactive(2) indicates that the coupling port has been prevented from setting into forwarding (please see description of…	Enumeration Enumerated Values: 1 noError 2 basicRedundancyInactive	.1.3.6.1.4.1.248.14.5.2.1.17
hmRingCplNetCoupling Specifies the kind of the coupled net segment. If two HIPER Rings are coupled ringCoupling(1) must be used. In netCoupling(2) the coupled segment is no HIPER Ring topology and the switches in the coupled net segment ma…	Enumerationr/w Enumerated Values: 1 ringCoupling 2 netCoupling	.1.3.6.1.4.1.248.14.5.2.1.18
hmRingCplConfigSource Returns the Source by which the feature is controlled.	Enumeration Enumerated Values: 1 dipSwitch 2 management	.1.3.6.1.4.1.248.14.5.2.1.19

Every entry in this table contains information about
a Media Redundancy Protocol (MRP) domain.

hmMrpEntry row .1.3.6.1.4.1.248.14.5.3.1

An entry in the hmMrpTable.

Indexes

hmMrpDomainID

Column	Syntax	OID
hmMrpDomainID Universally unique identifier belongs to the MRP domain which represents a ring.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.248.14.5.3.1.1
hmMrpRingport1GroupID Unique index to identify the slot number of the ringport 1 in the MRP domain. This value is never greater than hmSysGroupCapacity.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.3.1.2
hmMrpRingport1IfIndex Interface index of the ringport 1 in the MRP domain.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.3.1.3
hmMrpRingport1OperState Operational state of ringport 1. disabled(1) indicates that all frames are dropped. blocked(2) indicates that all frame are dropped except - MRP topology change frames and MRP test frames from a MRM, - MRP link change…	Enumeration Enumerated Values: 1 disabled 2 blocked 3 forwarding 4 not-connected	.1.3.6.1.4.1.248.14.5.3.1.4
hmMrpRingport2GroupID Unique index to identify the slot number of the ringport 2 in the MRP domain. This value is never greater than hmSysGroupCapacity.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.3.1.5
hmMrpRingport2IfIndex Interface index of the ringport 2 in the MRP domain.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.3.1.6
hmMrpRingport2OperState Operational state of ringport 2. disabled(1) indicates that all frames are dropped. blocked(2) indicates that all frame are dropped except - MRP topology change frames and MRP test frames from a MRM, - MRP link change…	Enumeration Enumerated Values: 1 disabled 2 blocked 3 forwarding 4 not-connected	.1.3.6.1.4.1.248.14.5.3.1.7
hmMrpVlanID VLAN identifier of the MRP domain.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.3.1.8
hmMrpExpectedRole Control the role of the MRP entity in the MRP domain. If the value is set to client(1) the entity will be in the role of a Media Redundancy Client (MRC). If the value is set to manager(2) the entity will be in the role …	Enumerationr/w Enumerated Values: 1 client 2 manager	.1.3.6.1.4.1.248.14.5.3.1.9
hmMrpMRCLinkDownInterval Interval for sending link down MRP link change frames on ringports.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.3.1.10
hmMrpMRCLinkUpInterval Interval for sending link up MRP link change frames on ringports.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.3.1.11
hmMrpMRCLinkChangeCount MRP link change frame count which controls repeated transmission of MRP link change frames.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.3.1.12
hmMrpMRCBlockedSupported Ability of the MRC to receive and forward MRP test frames, MRP link change frames and MRP topology change frames at a ringport whose port state is blocked. enabled(1) indicates that the MRC is able to receive and forwar…	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.248.14.5.3.1.13
hmMrpMRMPriority Priority of the MRM. A lower value indicates a higher priority.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.248.14.5.3.1.14
hmMrpMRMTopologyChangeInterval Interval for sending MRP topology change frames on ringports.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.3.1.15
hmMrpMRMTopologyChangeRepeatCount Interval count which controls repeated transmission of MRP topology change frames.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.3.1.16
hmMrpMRMShortTestInterval Short interval for sending MRP test frames on ringports after link changes in the ring.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.3.1.17
hmMrpMRMDefaultTestInterval Default interval for sending MRP test frames on ringports.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.3.1.18
hmMrpMRMTestMonitoringCount Interval count for monitoring the reception of MRP test frames.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.3.1.19
hmMrpMRMNonBlockingMRCSupported Ability of the MRM to support MRC in the ring which have hmMrpMRCBlockedSupported set disabled. enabled(1) indicates that the MRM is able to support MRC in the ring which have hmMrpMRCBlockedSupported set disabled. dis…	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.248.14.5.3.1.20
hmMrpMRMTestMonitoringExtendedCount Extended interval count for monitoring the reception of MRP test frames. This value is used by the MRP if hmMrpMRMNonBlockingMRCSupported is is set enabled.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.3.1.21
hmMrpMRMReactOnLinkChange Specifies whether the MRM reacts on all MRP link change frames or not. enabled(1) indicates that the MRM reacts on all MRP link change frames. disabled(2) indicates that the MRM does not react on link down MRP link chan…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.248.14.5.3.1.22
hmMrpMRMCheckMediaRedundancy Specifies whether monitoring of MRM state is enabled or disabled in the redundancy domain. enabled(1) indicates that the MRM monitors its state. disabled(2) indicates that the MRM does not monitor its state.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.248.14.5.3.1.23
hmMrpMRMRealRoleState Operational role of the MRP entity in the MRP domain. client(1) indicates that the MRP entity is in a MRC role. manager(2) indicates that the MRP entity is the manager MRM of this MRP domain. undefined(3) indicates tha…	Enumeration Enumerated Values: 1 client 2 manager 3 undefined	.1.3.6.1.4.1.248.14.5.3.1.24
hmMrpMRMRealRingState Actual ring state of the redundancy domain. open(1) indicates that the ring is opened. closed(2) indicates that the ring is closed. undefined(3) indicates an undefined ring state or can be read if hmMrpMRMRealRoleState…	Enumeration Enumerated Values: 1 open 2 closed 3 undefined	.1.3.6.1.4.1.248.14.5.3.1.25
hmMrpRowStatus Defines the status of the MRP database entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.14.5.3.1.26
hmMrpRedOperState Operational state of ring redundancy in the MRP domain. redGuaranteed(1) indicates that ring redundancy is guaranteed in the MRP domain. redNotGuaranteed(2) indicates that ring redundancy is not guaranteed in the MRP d…	Enumeration Enumerated Values: 1 redGuaranteed 2 redNotGuaranteed	.1.3.6.1.4.1.248.14.5.3.1.27
hmMrpConfigOperState Operational state of the configuration in the MRP domain. noError(1) indicates that no configuration error was detected. ringportLinkError(2) indicates that one of the ring lines is not connected with one of the ring po…	Enumeration Enumerated Values: 1 noError 2 ringportLinkError	.1.3.6.1.4.1.248.14.5.3.1.28
hmMrpDomainName A logical name for the MRP domain to ease the management of MRP domains.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.248.14.5.3.1.29
hmMrpMRMRecoveryDelay The MRM defines with its parameter set the maximum recovery delay of ring recovery in the MRP domain. delay500(1) specifies the parameter set for the maximum recovery delay of 500ms in the MRP domain. delay200(2) specif…	Enumerationr/w Enumerated Values: 1 delay500 2 delay200 3 delay1000	.1.3.6.1.4.1.248.14.5.3.1.30

Every entry in this table contains information about
a Ring Protocol Control (RPC) domain.

hmRpcEntry row .1.3.6.1.4.1.248.14.5.4.1

An entry in the hmRpcTable.

Indexes

hmRpcRingProtocol hmRpcRingID

Column	Syntax	OID
hmRpcRingProtocol Desired version of the ring protocol in the RPC domain. If the value is set to FastHiperRing(3) the entity will run the Fast Hiper Ring protocol. Note: Not all entities may support all ring protocols. …	Enumerationr/w Enumerated Values: 3 fastHiperRing	.1.3.6.1.4.1.248.14.5.4.1.1
hmRpcRingID Identifier of the ring in the RPC domain.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.4.1.2
hmRpcRingName Name of the ring in RPC domain.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.248.14.5.4.1.3
hmRpcRingport1GroupID Unique index to identify the slot number of ringport 1 in the RPC domain. This value is never greater than hmSysGroupCapacity.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.4.1.4
hmRpcRingport1IfIndex Interface index of ringport 1 in the RPC domain.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.4.1.5
hmRpcRingport1OperState Operational state of ringport 1. disabled(1) indicates that all frames are dropped. blocked(2) indicates that all frames are dropped except - frames used by the selected ring protocol selected which are de…	Enumeration Enumerated Values: 1 disabled 2 blocked 3 forwarding 4 not-connected	.1.3.6.1.4.1.248.14.5.4.1.6
hmRpcRingport2GroupID Unique index to identify the slot number of ringport 2 in the RPC domain. This value is never greater than hmSysGroupCapacity.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.4.1.7
hmRpcRingport2IfIndex Interface index of ringport 2 in the RPC domain.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.4.1.8
hmRpcRingport2OperState Operational state of ringport 2. disabled(1) indicates that all frames are dropped. blocked(2) indicates that all frames are dropped except - frames used by the selected ring protocol selected which are de…	Enumeration Enumerated Values: 1 disabled 2 blocked 3 forwarding 4 not-connected	.1.3.6.1.4.1.248.14.5.4.1.9
hmRpcVlanID VLAN identifier of the RPC domain. If value is set to 0 no VLAN is assigned.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.4.1.10
hmRpcAdminState Admin state of the entity in the RPC domain. If the value is set to client(1) the entity will be in the role of a redundancy client. If the value is set to manager(2) the entity will be in the role of a redundancy manag…	Enumerationr/w Enumerated Values: 1 client 2 manager	.1.3.6.1.4.1.248.14.5.4.1.11
hmRpcOperState Operational state of the entity in the RPC domain. client(1) indicates that the entity is in the role of a redundancy client. manager(2) indicates that the entity is in the role of a redundancy manager. disabled(3) indi…	Enumeration Enumerated Values: 1 client 2 manager 3 disabled	.1.3.6.1.4.1.248.14.5.4.1.12
hmRpcRingOperState Operational state of the ring in the RPC domain. undefined(1) indicates either an undefined ring state or the entity may have the role of a redundancy client. open(1) indicates that the ring is opened. closed(2) indicat…	Enumeration Enumerated Values: 1 undefined 2 open 3 closed	.1.3.6.1.4.1.248.14.5.4.1.13
hmRpcRedundancyOperState Operational state of the ring redundancy in the RPC domain. redGuaranteed(1) indicates that ring redundancy is guaranteed in the RPC domain. redNotGuaranteed(2) indicates that ring redundancy is not guaranteed in the …	Enumeration Enumerated Values: 1 redGuaranteed 2 redNotGuaranteed	.1.3.6.1.4.1.248.14.5.4.1.14
hmRpcConfigOperState Operational state of the configuration in the RPC domain. noError(1) indicates that no configuration error was detected. ringportLinkError(2) indicates that the ring port has no link or one of the ring lines is not conn…	Enumeration Enumerated Values: 1 noError 2 ringportLinkError 3 singleSideReceive 4 multipleRM	.1.3.6.1.4.1.248.14.5.4.1.15
hmRpcRowStatus Defines the status of the RPC database entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.14.5.4.1.16
hmRpcNodes Manager only: number of nodes in the RPC ring.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.4.1.17
hmRpcRoundTripDelay Manager only: maximum Round-Trip-Delay (in microseconds) which was measured since the RowStatus of the RPC domain has been set active.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.248.14.5.4.1.18

Every entry in this table contains information about
a Sub-Ring Manager (SRM) domain in the Multi HIPER Ring.

hmSrmEntry row .1.3.6.1.4.1.248.14.5.5.5.1

An entry in the hmSrmTable.

Indexes

hmSrmRingID

Column	Syntax	OID
hmSrmRingID Identifier of the sub-ring in the SRM domain.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.5.5.1.1
hmSrmRingProtocol If the value is set to standardMRP(4) the entity will run the MRP protocol. Note: If using standardMRP(4) all clients in the sub-ring segment must run MRP according to IEC 62439.	Enumerationr/w Enumerated Values: 4 standardMRP	.1.3.6.1.4.1.248.14.5.5.5.1.2
hmSrmRingName Name of the sub-ring in SRM domain.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.248.14.5.5.5.1.3
hmSrmRingport1GroupID Unique index to identify the slot number of ringport 1 in the SRM domain. This value is never greater than hmSysGroupCapacity.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.5.5.1.4
hmSrmRingport1IfIndex Interface index of ringport 1 in the SRM domain.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.248.14.5.5.5.1.5
hmSrmRingport1OperState Operational state of ringport 1. disabled(1) indicates that all frames are dropped. blocked(2) indicates that all frames are dropped except - frames used by the selected ring protocol which are defined to …	Enumeration Enumerated Values: 1 disabled 2 blocked 3 forwarding 4 not-connected	.1.3.6.1.4.1.248.14.5.5.5.1.6
hmSrmVlanID VLAN identifier of the SRM domain. If value is set to 0 no VLAN is assigned.	Integer32r/w Constraints: range: 0-4042	.1.3.6.1.4.1.248.14.5.5.5.1.7
hmSrmAdminState Admin state of the entity in the SRM domain. If the value is set to manager(1) the entity will be in the role of a Sub-Ring Manager in the Multi HIPER Ring. If the value is set to redundantManager(2) the …	Enumerationr/w Enumerated Values: 1 manager 2 redundantManager 3 singleManager	.1.3.6.1.4.1.248.14.5.5.5.1.8
hmSrmOperState Operational state of the entity in the SRM domain. manager(1) indicates that the entity is in the role of a Sub-Ring Manager in the Multi HIPER Ring. redundantManager(3) indicates that the entity is in the role of the S…	Enumeration Enumerated Values: 1 manager 2 redundantManager 3 singleManager 4 disabled	.1.3.6.1.4.1.248.14.5.5.5.1.9
hmSrmRingOperState Operational state of the sub-ring in the SRM domain. undefined(1) indicates an undefined sub-ring state. open(2) indicates that the sub-ring is opened. closed(3) indicates that the sub-ring is closed.	Enumeration Enumerated Values: 1 undefined 2 open 3 closed	.1.3.6.1.4.1.248.14.5.5.5.1.10
hmSrmRedundancyOperState Operational state of the ring redundancy in the SRM domain. redGuaranteed(1) indicates that ring redundancy is guaranteed in the SRM domain. redNotGuaranteed(2) indicates that ring redundancy is not guaranteed in the …	Enumeration Enumerated Values: 1 redGuaranteed 2 redNotGuaranteed	.1.3.6.1.4.1.248.14.5.5.5.1.11
hmSrmConfigOperState Operational state of the configuration in the SRM domain. noError(1) indicates that no configuration error was detected. ringportLinkError(2) indicates that the ring port has no link or one of the sub-ring lines is not …	Enumeration Enumerated Values: 1 noError 2 ringportLinkError 3 multipleSRM 4 noPartnerManager 5 concurrentVLAN 6 concurrentPort 7 concurrentRedundancy 8 trunkMember 9 sharedVLAN	.1.3.6.1.4.1.248.14.5.5.5.1.12
hmSrmRowStatus Defines the status of the SRM database entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.248.14.5.5.5.1.13
hmSrmNodes Number of nodes in the sub-ring. Note: Will get neccessary if the SRM runs on a fpga.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.248.14.5.5.5.1.14
hmSrmMRPDomainID Only for MRP: Universally unique identifier belongs to the MRP domain which represents a sub-ring.	OctetStringr/w Constraints: range: 16-16	.1.3.6.1.4.1.248.14.5.5.5.1.15
hmSrmPartnerMAC The MAC address of the partner Sub-Ring Manager in the same sub-ring domain.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.248.14.5.5.5.1.16
hmSrmRecoveryDelay The maximum recovery delay of ring recovery in the SRM domain. delay300(1) specifies the parameter set for the maximum recovery delay of 300ms in the SRM domain. delay1000(2) specifies the parameter set for the maximum …	Enumerationr/w Enumerated Values: 1 delay300 2 delay1000	.1.3.6.1.4.1.248.14.5.5.5.1.17