hmMrpConfigOperState
HMRING-MGMT-SNMP-MIB ·
.1.3.6.1.4.1.248.14.5.3.1.28
Object
column
Enumeration
Operational state of the configuration in the MRP domain. noError(1) indicates that no configuration error was detected. ringportLinkError(2) indicates that one of the ring lines is not connected with one of the ring ports in the MRP domain.
Context
- MIB
- HMRING-MGMT-SNMP-MIB
- OID
.1.3.6.1.4.1.248.14.5.3.1.28- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hmMrpEntry
- Table
- hmMrpTable
- Siblings
- 29
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | noError |
2 | ringportLinkError |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmMrpDomainID Universally unique identifier belongs to the MRP domain
which represents a ring. | column | OctetString | .1.3.6.1.4.1.248.14.5.3.1.1 |
| hmMrpMRCLinkDownInterval Interval for sending link down MRP link change frames on ringports. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.3.1.10 |
| hmMrpMRCLinkUpInterval Interval for sending link up MRP link change frames on ringports. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.3.1.11 |
| hmMrpMRCLinkChangeCount MRP link change frame count which controls repeated transmission of
MRP link change frames. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.3.1.12 |
| hmMrpMRCBlockedSupported Ability of the MRC to receive and forward MRP test frames, MRP link
change frames and MRP topology change frames at a ringport whose
port state is blocked.
enabled(1) indicates th… | column | Enumeration | .1.3.6.1.4.1.248.14.5.3.1.13 |
| hmMrpMRMPriority Priority of the MRM. A lower value indicates a higher priority. | column | Integer32 | .1.3.6.1.4.1.248.14.5.3.1.14 |
| hmMrpMRMTopologyChangeInterval Interval for sending MRP topology change frames on ringports. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.3.1.15 |
| hmMrpMRMTopologyChangeRepeatCount Interval count which controls repeated transmission of MRP
topology change frames. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.3.1.16 |
| hmMrpMRMShortTestInterval Short interval for sending MRP test frames on ringports after
link changes in the ring. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.3.1.17 |
| hmMrpMRMDefaultTestInterval Default interval for sending MRP test frames on ringports. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.3.1.18 |
| hmMrpMRMTestMonitoringCount Interval count for monitoring the reception of MRP test frames. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.3.1.19 |
| hmMrpRingport1GroupID Unique index to identify the slot number of the ringport 1 in the
MRP domain.
This value is never greater than hmSysGroupCapacity. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.3.1.2 |
| hmMrpMRMNonBlockingMRCSupported Ability of the MRM to support MRC in the ring which have
hmMrpMRCBlockedSupported set disabled.
enabled(1) indicates that the MRM is able to support MRC in the ring
which have hm… | column | Enumeration | .1.3.6.1.4.1.248.14.5.3.1.20 |
| hmMrpMRMTestMonitoringExtendedCount Extended interval count for monitoring the reception of MRP test
frames.
This value is used by the MRP if hmMrpMRMNonBlockingMRCSupported is
is set enabled. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.3.1.21 |
| hmMrpMRMReactOnLinkChange Specifies whether the MRM reacts on all MRP link change frames or not.
enabled(1) indicates that the MRM reacts on all MRP link change frames.
disabled(2) indicates that the MRM d… | column | Enumeration | .1.3.6.1.4.1.248.14.5.3.1.22 |
| hmMrpMRMCheckMediaRedundancy Specifies whether monitoring of MRM state is enabled or disabled
in the redundancy domain.
enabled(1) indicates that the MRM monitors its state.
disabled(2) indicates that the MRM… | column | Enumeration | .1.3.6.1.4.1.248.14.5.3.1.23 |
| hmMrpMRMRealRoleState Operational role of the MRP entity in the MRP domain.
client(1) indicates that the MRP entity is in a MRC role.
manager(2) indicates that the MRP entity is the manager MRM
of this… | column | Enumeration | .1.3.6.1.4.1.248.14.5.3.1.24 |
| hmMrpMRMRealRingState Actual ring state of the redundancy domain.
open(1) indicates that the ring is opened.
closed(2) indicates that the ring is closed.
undefined(3) indicates an undefined ring state … | column | Enumeration | .1.3.6.1.4.1.248.14.5.3.1.25 |
| hmMrpRowStatus Defines the status of the MRP database entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.248.14.5.3.1.26 |
| hmMrpRedOperState Operational state of ring redundancy in the MRP domain.
redGuaranteed(1) indicates that ring redundancy is guaranteed in the
MRP domain.
redNotGuaranteed(2) indicates that ring r… | column | Enumeration | .1.3.6.1.4.1.248.14.5.3.1.27 |
| hmMrpDomainName A logical name for the MRP domain to ease the management of MRP
domains. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.248.14.5.3.1.29 |
| hmMrpRingport1IfIndex Interface index of the ringport 1 in the MRP domain. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.3.1.3 |
| hmMrpMRMRecoveryDelay The MRM defines with its parameter set the maximum recovery
delay of ring recovery in the MRP domain.
delay500(1) specifies the parameter set for the maximum
recovery delay of 500… | column | Enumeration | .1.3.6.1.4.1.248.14.5.3.1.30 |
| hmMrpRingport1OperState Operational state of ringport 1.
disabled(1) indicates that all frames are dropped.
blocked(2) indicates that all frame are dropped except
- MRP topology change frames and MRP te… | column | Enumeration | .1.3.6.1.4.1.248.14.5.3.1.4 |
| hmMrpRingport2GroupID Unique index to identify the slot number of the ringport 2 in the
MRP domain.
This value is never greater than hmSysGroupCapacity. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.3.1.5 |
| hmMrpRingport2IfIndex Interface index of the ringport 2 in the MRP domain. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.3.1.6 |
| hmMrpRingport2OperState Operational state of ringport 2.
disabled(1) indicates that all frames are dropped.
blocked(2) indicates that all frame are dropped except
- MRP topology change frames and MRP te… | column | Enumeration | .1.3.6.1.4.1.248.14.5.3.1.7 |
| hmMrpVlanID VLAN identifier of the MRP domain. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.3.1.8 |
| hmMrpExpectedRole Control the role of the MRP entity in the MRP domain.
If the value is set to client(1) the entity will be in the
role of a Media Redundancy Client (MRC).
If the value is set to ma… | column | Enumeration | .1.3.6.1.4.1.248.14.5.3.1.9 |