hmRingCplExtendedDiag
HMRING-MGMT-SNMP-MIB ·
.1.3.6.1.4.1.248.14.5.2.1.17
Object
column
Enumeration
Additional operational states detected by the slave or in local mode.
basicRedundancyInactive(2) indicates that the coupling port has been
prevented from setting into forwarding (please see description
of hmRingCplCouplingLinks).
Context
- MIB
- HMRING-MGMT-SNMP-MIB
- OID
.1.3.6.1.4.1.248.14.5.2.1.17- Type
- column
- Access
- readonly
- Status
- current
- Parent
- hmRingCouplingEntry
- Table
- hmRingCouplingTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | noError |
2 | basicRedundancyInactive |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hmRingCplInterconnGroupID Unique index to identify the slot number of
the coupling link port. This value is never
greater than hmSysGroupCapacity.
Note that row creation is done only by
writing to hmRing… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.2.1.1 |
| hmRingCplPartnerInterconnIfIndex Interface index identifies the coupling link of the
partner in the ring coupling.
This variable can only be set if the
hmRingCplControlMode is local(4). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.2.1.10 |
| hmRingCplPartnerInterconnIfOpState Operational state of the coupling interface of the
partner in the ring coupling.
active(2) indicates that the partner port is switching.
standby(3) indicates that the partner port… | column | Enumeration | .1.3.6.1.4.1.248.14.5.2.1.11 |
| hmRingCplOperState Operational state of an entry.
If a new entry is created by setting hmRingCplRowStatus to create(1),
the operState returns a value of underCreation(1).
slave(2) indicates that swi… | column | Enumeration | .1.3.6.1.4.1.248.14.5.2.1.12 |
| hmRingCplMode Desired mode of operation.
slaveOn(2) activates the slave.
slaveOff(1) deactivates the slave, the ring coupling is disabled and
the switch acts from now in normal rs mode.
Note th… | column | Enumeration | .1.3.6.1.4.1.248.14.5.2.1.13 |
| hmRingCplRowStatus Defines the status of a ring coupling database entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.248.14.5.2.1.14 |
| hmRingCplConfigOperState Operational state of the ring coupling configuration.
slaveCouplingLinkError(2) indicates that the coupling link
is not connected with the coupling port of the sl… | column | Enumeration | .1.3.6.1.4.1.248.14.5.2.1.15 |
| hmRingCplCouplingLinks Maximum coupling links between two coupled rings in case of a failure
in one of the coupled rings.
If there is no connection starting from the switch in slave or lo… | column | Enumeration | .1.3.6.1.4.1.248.14.5.2.1.16 |
| hmRingCplNetCoupling Specifies the kind of the coupled net segment.
If two HIPER Rings are coupled ringCoupling(1) must be used.
In netCoupling(2) the coupled segment is no HIPER Ring topology and the… | column | Enumeration | .1.3.6.1.4.1.248.14.5.2.1.18 |
| hmRingCplConfigSource Returns the Source by which the feature is controlled. | column | Enumeration | .1.3.6.1.4.1.248.14.5.2.1.19 |
| hmRingCplInterconnIfIndex Interface index of the coupling link.
Note that only those ports can be chosen
which do not belong to another L2 redundancy
mechanism like ring redundancy or dual homing
and that … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.2.1.2 |
| hmRingCplInterconnIfOpState Operational state of the coupling interface.
active(2) indicates that the port is switching.
standby(3) indicates that the port is in standby mode.
On the slave active(2) indicate… | column | Enumeration | .1.3.6.1.4.1.248.14.5.2.1.3 |
| hmRingCplControlGroupID Unique index to identify the slot number of
the control link port in case of outband-control.
This value is never greater than hmSysGroupCapacity. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.2.1.4 |
| hmRingCplControlIfIndex Interface index of the control link in case
of outband-control.
Note that only those ports can be chosen
which do not belong to another L2 redundancy
mechanism like ring redundan… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.2.1.5 |
| hmRingCplControlIfOpState Operational state of the control interface in case
of outband-control. | column | Enumeration | .1.3.6.1.4.1.248.14.5.2.1.6 |
| hmRingCplControlMode Control mode of the ring coupling which can only be
chosen by the slave, the master just reports his current
control mode. unknown(3) cannot be set.
In outband(1) mode an additio… | column | Enumeration | .1.3.6.1.4.1.248.14.5.2.1.7 |
| hmRingCplPartnerIpAddr IP Address of the partner in the ring coupling. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.248.14.5.2.1.8 |
| hmRingCplPartnerInterconnGroupID Index identifies the slot number of the
coupling link port of the partner in the
ring coupling.
This variable can only be set if the
hmRingCplControlMode is local(4). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.248.14.5.2.1.9 |