HH3C-DOT11-RRM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
72

hh3cDot11RRMRadioCfgTable

table
.1.3.6.1.4.1.25506.2.75.8.1.2 · 1 row entry · 13 columns
Open in standard view 
Configure WLAN RRM based radio type.
When 802.11b parameter is modified, 802.11g parameter will be
changed at the same time.
In the same way, when 802.11g parameter is modified, 802.11b parameter
will be changed at the same time.
hh3cDot11RRMRadioCfgEntry entry .1.3.6.1.4.1.25506.2.75.8.1.2.1
Configure WLAN RRM based radio type.
When 802.11b parameter is modified, 802.11g parameter will be
changed at the same time.
In the same way, when 802.11g parameter is modified, 802.11b parameter
will be changed at the …
Indexes
hh3cDot11RRMRadioType
Column Syntax OID
hh3cDot11RRMRadioType
802.11 radio type.
HH3C-DOT11-REF-MIBHh3cDot11RadioType
Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioType Enumeration
Type Values:
1dot11a
2dot11b
4dot11g
8dot11n
16dot11gn
32dot11an
64dot11ac
128dot11gac
256dot11ax
512dot11gax
 .1.3.6.1.4.1.25506.2.75.8.1.2.1.1
hh3cDot11RRMCfgChlState
Enable/Disable dynamic channel selection.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.25506.2.75.8.1.2.1.2
hh3cDot11RRMCfgChlMode
Configure the mode of channel selection.
This node can be configured only when dynamic channel selection
is enabled.
Enumerationr/w
Enumerated Values:
1selfDecisive
2userTriggered
 .1.3.6.1.4.1.25506.2.75.8.1.2.1.3
hh3cDot11RRMChlProntoRadioElmt
Specify the AP and radio that will change channel at next
calibration cycle.
0 is returned when getting the value of this node.
This node can be configured only when the mode of channel selection
control is user-trigger…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.75.8.1.2.1.4
hh3cDot11RRMCfgPwrState
Enable/Disable dynamic power selection for the band.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.25506.2.75.8.1.2.1.5
hh3cDot11RRMCfgPwrMode
Configure the mode of transmit power control.
This node can be configured only when dynamic power selection
is enabled.
Enumerationr/w
Enumerated Values:
1selfDecisive
2userTriggered
 .1.3.6.1.4.1.25506.2.75.8.1.2.1.6
hh3cDot11RRMPwrProntoRadioElmt
Specify the AP and radio that will change power at next
calibration cycle.
0 is returned when getting the value of this node.
This node can be configured only when the mode of transmit power
control is user-triggered.
W…
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.75.8.1.2.1.7
hh3cDot11RRMCfgIntrvl
Configure the calibration interval.
minuteSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.1.2.1.8
hh3cDot11RRMCfgIntrfThres
Configure the interface threshold.
By default, interference observed on an operating channel is considered
during dynamic frequency selection and transmit power control. If the
interference percentage on the channel re…
percentInteger32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.25506.2.75.8.1.2.1.9
hh3cDot11RRMCfgNoiseThres
Configure the noise threshold.
Integer32r/w
Constraints:
range: -127-127
 .1.3.6.1.4.1.25506.2.75.8.1.2.1.10
hh3cDot11RRMCfgPERThres
Configure the CRC error threshold.
If the percentage of CRC errors reaches the threshold, RRM will perform
resource adjustment to control the situation.
percentInteger32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.25506.2.75.8.1.2.1.11
hh3cDot11RRMCfgToleranceFctr
Configure the tolerance level.
During dynamic frequency selection (DFS), the channel will be changed
only if there is a better channel having lesser interference and packet
error rate than those specified by the user.
percentInteger32r/w
Constraints:
range: 1-45
 .1.3.6.1.4.1.25506.2.75.8.1.2.1.12
hh3cDot11RRMCfgAdjacencyFctr
Configure the adjacency factor for the band.
If transmit power control (TPC) is configured, power will be adjusted
when the nth neighbor is detected. The value n is the adjacency factor.
Integer32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.25506.2.75.8.1.2.1.13

hh3cDot11RRMAPCfgTable

table
.1.3.6.1.4.1.25506.2.75.8.1.3 · 1 row entry · 1 columns
Open in standard view 
This table defines the RRM parameters for AP.
hh3cDot11RRMAPCfgEntry entry .1.3.6.1.4.1.25506.2.75.8.1.3.1
Each entry contains information of RRM parameters for AP.
Indexes
HH3C-DOT11-REF-MIBhh3cDot11APElementIndex
Column Syntax OID
hh3cDot11RRMAPWorkMode
AP work mode.
Enumerationr/w
Enumerated Values:
1normal
2monitor
3hybrid
 .1.3.6.1.4.1.25506.2.75.8.1.3.1.1

hh3cDot11RRMSDRadioGroupTable

table
.1.3.6.1.4.1.25506.2.75.8.1.4 · 1 row entry · 5 columns
Open in standard view 
This table defines RRM self-decisive radio group.
hh3cDot11RRMSDRadioGroupEntry entry .1.3.6.1.4.1.25506.2.75.8.1.4.1
Each entry contains information of one RRM self-decisive radio group.
Indexes
hh3cDot11RRMSDRadioGroupId
Column Syntax OID
hh3cDot11RRMSDRadioGroupId
Represents RRM self-decisive radio group ID.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.75.8.1.4.1.1
hh3cDot11RRMSDRadioGroupDesc
Represents the description of RRM self-decisive radio group.
OctetStringr/w .1.3.6.1.4.1.25506.2.75.8.1.4.1.2
hh3cDot11RRMSDRdGrpChlHolddownTm
Represents the channel holddown time of RRM self-decisive radio group.
minuteSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.75.8.1.4.1.3
hh3cDot11RRMSDRdGrpPwrHolddownTm
Represents the power holddown time of RRM self-decisive radio group.
minuteSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.25506.2.75.8.1.4.1.4
hh3cDot11RRMSDRdGroupRowStatus
The row status of this table entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.25506.2.75.8.1.4.1.5

hh3cDot11RRMAPCfg2Table

table
.1.3.6.1.4.1.25506.2.75.8.1.5 · 1 row entry · 5 columns
Open in standard view 
This table defines the RRM parameters for AP.
hh3cDot11RRMAPCfg2Entry entry .1.3.6.1.4.1.25506.2.75.8.1.5.1
Each entry contains information of RRM parameters for AP.
Indexes
hh3cDot11RRMAPSerialID
Column Syntax OID
hh3cDot11RRMAPSerialID
Serial ID of the AP.
HH3C-DOT11-REF-MIBHh3cDot11ObjectIDType
Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ObjectIDType OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.25506.2.75.8.1.5.1.1
hh3cDot11RRMAPIntfThreshold
Represents threshold of AP interference .
If the number of AP interference exceeds this threshold,
AP interference trap will be sent.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.1.5.1.2
hh3cDot11RRMStaIntfThreshold
Represents threshold of STA interference.
If the number of STA interference exceeds this threshold,
station interference trap will be sent.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.1.5.1.3
hh3cDot11RRMCoChlIntfTrapThhd
Represents threshold of interference trap with current ap.
If signal strength of the device exceeds this threshold,
corresponding trap will be sent.
dbmSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.1.5.1.4
hh3cDot11RRMAdjChlIntfTrapThhd
Represents threshold of adjacent interference trap with current ap.
If signal strength of the device exceeds this threshold,
corresponding trap will be sent.
dbmSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.1.5.1.5

hh3cDot11RRMChlRptTable

table
.1.3.6.1.4.1.25506.2.75.8.2.1 · 1 row entry · 12 columns
Open in standard view 
This table shows the RRM channel information of each radio
on all APs.
hh3cDot11RRMChlRptEntry entry .1.3.6.1.4.1.25506.2.75.8.2.1.1
Each entry contains information of RRM channel information
of the radio on the AP.
Indexes
hh3cDot11RRMRadioIndex hh3cDot11RRMChlRptChlNum
Column Syntax OID
hh3cDot11RRMRadioIndex
Represents index of the radio.
HH3C-DOT11-REF-MIBHh3cDot11RadioElementIndex
Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioElementIndex Unsigned32
 .1.3.6.1.4.1.25506.2.75.8.2.1.1.1
hh3cDot11RRMChlRptChlNum
Channel number.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.2.1.1.2
hh3cDot11RRMChlRptChlType
Channel type.
Enumeration
Enumerated Values:
1primeChannel
2offChannel
 .1.3.6.1.4.1.25506.2.75.8.2.1.1.3
hh3cDot11RRMChlRptChlQlty
Channel quality.
Enumeration
Enumerated Values:
1good
2bad
 .1.3.6.1.4.1.25506.2.75.8.2.1.1.4
hh3cDot11RRMChlRptNbrCnt
Number of neighbors found on the channel.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.2.1.1.5
hh3cDot11RRMChlRptLoad
Load observed on the channel in percentage.
percentInteger32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25506.2.75.8.2.1.1.6
hh3cDot11RRMChlRptUtlz
Utilization of the channel in percentage.
percentInteger32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25506.2.75.8.2.1.1.7
hh3cDot11RRMChlRptIntrf
Interference observed on the channel in percentage.
percentInteger32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25506.2.75.8.2.1.1.8
hh3cDot11RRMChlRptPER
Packet error rate observed on the channel in percentage.
percentInteger32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25506.2.75.8.2.1.1.9
hh3cDot11RRMChlRptRetryRate
Percentage of retransmission happened on the channel.
percentInteger32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25506.2.75.8.2.1.1.10
hh3cDot11RRMChlRptNoise
Noise observed on the channel.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.2.1.1.11
hh3cDot11RRMChlRptRadarIndtcr
Radar detection status.
Enumerationr/w
Enumerated Values:
1detected
2notDetected
 .1.3.6.1.4.1.25506.2.75.8.2.1.1.12

hh3cDot11RRMNbrInfoTable

table
.1.3.6.1.4.1.25506.2.75.8.2.2 · 1 row entry · 8 columns
Open in standard view 
This table shows the RRM neighbor information of each radio
on all APs.
hh3cDot11RRMNbrInfoEntry entry .1.3.6.1.4.1.25506.2.75.8.2.2.1
Each entry contains information of RRM neighbor information
of the radio on an AP.
Indexes
hh3cDot11RRMRadioIndex hh3cDot11RrmNbrBSSID
Column Syntax OID
hh3cDot11RrmNbrBSSID
MAC address of the AP.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.25506.2.75.8.2.2.1.1
hh3cDot11RrmNbrChl
Channel number on which the neighbor was found.
HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType
Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType Integer32
 .1.3.6.1.4.1.25506.2.75.8.2.2.1.2
hh3cDot11RRMNbrIntrf
Interference observed on the channel in percentage by neighbor.
percentInteger32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25506.2.75.8.2.2.1.3
hh3cDot11RrmNbrRSSI
Signal strength of the AP in dBm.
dBmSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.2.2.1.4
hh3cDot11RrmNbrType
Type of the AP, managed or unmanaged.
Enumeration
Enumerated Values:
1managed
2unmanaged
 .1.3.6.1.4.1.25506.2.75.8.2.2.1.5
hh3cDot11RrmNbrSSID
SSID of the Neighbor.
HH3C-DOT11-REF-MIBHh3cDot11SSIDStringType
Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11SSIDStringType OctetString
 .1.3.6.1.4.1.25506.2.75.8.2.2.1.6
hh3cDot11RrmNbrSNR
Signal to noise ratio of the AP in dB.
dBSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.2.2.1.7
hh3cDot11RrmNbrNF
Noise floor of the AP in dBm.
dBmSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.2.2.1.8

hh3cDot11RRMHistoryTable

table
.1.3.6.1.4.1.25506.2.75.8.2.3 · 1 row entry · 12 columns
Open in standard view 
This table shows the details of the latest three channel changes
and power changes applied on all APs, including time of change,
reason of the change and the channel, power, interference parameters.
hh3cDot11RRMHistoryEntry entry .1.3.6.1.4.1.25506.2.75.8.2.3.1
Each entry shows the details of channel and power changes.
Indexes
hh3cDot11RRMRadioIndex hh3cDot11RRMHistoryId hh3cDot11RRMHistoryRecIndctr
Column Syntax OID
hh3cDot11RRMHistoryId
History number of the change.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.2.3.1.1
hh3cDot11RRMHistoryRecIndctr
History record type of the change.
Enumeration
Enumerated Values:
1before
2after
 .1.3.6.1.4.1.25506.2.75.8.2.3.1.2
hh3cDot11RRMHistoryChl
Channel on which the radio operates before/after the change
of channel or power.
HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType
Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType Integer32
 .1.3.6.1.4.1.25506.2.75.8.2.3.1.3
hh3cDot11RRMHistoryPwr
Power of the radio before/after the change of channel or
power.
dBmSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.2.3.1.4
hh3cDot11RRMHistoryLoad
Load observed on the radio in percentage before/after the
change of channel or power.
percentInteger32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25506.2.75.8.2.3.1.5
hh3cDot11RRMHistoryUtlz
Utilization of the radio in percentage before/after the
change of channel or power.
percentInteger32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25506.2.75.8.2.3.1.6
hh3cDot11RRMHistoryIntrf
Interference observed on the radio in percentage
before/after the change of channel or power.
percentInteger32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25506.2.75.8.2.3.1.7
hh3cDot11RRMHistoryNoise
Noise observed on the radio before/after the change
of channel or power.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.2.3.1.8
hh3cDot11RRMHistoryPER
Packet error rate observed on the radio in percentage
before/after the change of channel or power.
percentInteger32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25506.2.75.8.2.3.1.9
hh3cDot11RRMHistoryRetryRate
Percentage of retransmission happened on the radio
before/after the change of channel or power.
percentInteger32
Constraints:
range: 0-100
 .1.3.6.1.4.1.25506.2.75.8.2.3.1.10
hh3cDot11RRMHistoryChgReason
Reason for the change of channel or power.
The various bit positions are:
|0 |Others |
|1 |Coverage |
|2 |Radar |
|3 |Retransmission …
Bits
Enumerated Values:
0others
1coverage
2radar
3retransmission
4packetsDiscarded
5interference
 .1.3.6.1.4.1.25506.2.75.8.2.3.1.11
hh3cDot11RRMHistoryChgDateTime
The time when the channel or power change occurred.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.25506.2.75.8.2.3.1.12

hh3cDot11RRMRadioNbrInfoTable

table
.1.3.6.1.4.1.25506.2.75.8.2.4 · 1 row entry · 3 columns
Open in standard view 
This table shows the RRM neighbor information of each radio
on all APs.
hh3cDot11RRMRadioNbrInfoEntry entry .1.3.6.1.4.1.25506.2.75.8.2.4.1
Each entry contains information of RRM neighbor information
of the radio on an AP.
Indexes
hh3cDot11RRMRadioNbrAPID hh3cDot11RRMRadioNbrRadioID
Column Syntax OID
hh3cDot11RRMRadioNbrAPID
AP serial id.
HH3C-DOT11-REF-MIBHh3cDot11ObjectIDType
Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ObjectIDType OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.25506.2.75.8.2.4.1.1
hh3cDot11RRMRadioNbrRadioID
Radio Id on AP.
HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType
Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType Integer32
 .1.3.6.1.4.1.25506.2.75.8.2.4.1.2
hh3cDot11RRMRadioNbrSSID
All neighbour SSIDs scanned by the selected radio.
OctetString .1.3.6.1.4.1.25506.2.75.8.2.4.1.3

hh3cDot11MonitorDetectedDevTable

table
.1.3.6.1.4.1.25506.2.75.8.4.1 · 1 row entry · 13 columns
Open in standard view 
This table shows the devices of AP detected
hh3cDot11MonitorDetectedDevEntry entry .1.3.6.1.4.1.25506.2.75.8.4.1.1
Each entry contains information of detected devices.
Indexes
hh3cDot11MonitorDevMAC HH3C-DOT11-REF-MIBhh3cDot11APElementIndex
Column Syntax OID
hh3cDot11MonitorDevMAC
Represents MAC address of the device detected.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.25506.2.75.8.4.1.1.1
hh3cDot11MonitorDevType
Represents type of the device detected.
Enumeration
Enumerated Values:
1client
2ap
3adhoc
4wirelessBridge
5unknown
 .1.3.6.1.4.1.25506.2.75.8.4.1.1.2
hh3cDot11MonitorDevVendor
Represents vendor of the detected device.
OctetString .1.3.6.1.4.1.25506.2.75.8.4.1.1.3
hh3cDot11MonitorDevSSID
Represents the service set identifier for the ESS of the device which
type is ap or adhoc.
OctetString .1.3.6.1.4.1.25506.2.75.8.4.1.1.4
hh3cDot11MonitorDevBSSID
Represents the basic service set identifier of the detected device.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.25506.2.75.8.4.1.1.5
hh3cDot11MonitorDevChannel
Represents the channel in which the device was last detected. AP will
choose the channel which has maximum signal strength as effective
channel, as there is interference between adjacent channels.
HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType
Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11ChannelScopeType Integer32
 .1.3.6.1.4.1.25506.2.75.8.4.1.1.6
hh3cDot11MonitorRadioId
Represents the radio ID of the AP that detected the device.
HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType
Textual Convention: HH3C-DOT11-REF-MIBHh3cDot11RadioScopeType Integer32
 .1.3.6.1.4.1.25506.2.75.8.4.1.1.7
hh3cDot11MonitorDevMaxRSSI
Represents the maximum detected RSSI of the device in a scan report cycle.
dbmSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.4.1.1.8
hh3cDot11MonitorDevBeaconIntvl
Represents the beacon interval for the detected device(not include
the device which type is client).
millisecondSNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.4.1.1.9
hh3cDot11MonitorDevFstDctTime
Represents the time at which the device was first detected.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.25506.2.75.8.4.1.1.10
hh3cDot11MonitorDevLstDctTime
Represents the time at which the device was detected last time.
SNMPv2-TCDateAndTime
Textual Convention: SNMPv2-TCDateAndTime OctetString
Type Constraints:
range: 8
range: 11
 .1.3.6.1.4.1.25506.2.75.8.4.1.1.11
hh3cDot11MonitorDevClear
This object is used to clear the information of the device detected
in the WLAN.
It will return false for get operation.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.25506.2.75.8.4.1.1.12
hh3cDot11MonitorDevSNR
Represents the SNR of the device in a scan report cycle.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.25506.2.75.8.4.1.1.13