Finisher-MIB Table View

This table defines the finishing device subunits,
including information regarding possible configuration
options and the status for each finisher device subunit.

finDeviceEntry row .1.3.6.1.2.1.43.30.1.1

There is an entry in the finishing device table for each
possible finisher process. Each individual finisher process is
implemented by a finishing device represented in this table.

Indexes

HOST-RESOURCES-MIBhrDeviceIndex finDeviceIndex

Column	Syntax	OID
finDeviceIndex A unique value used to identify a finisher process. Although these values may change due to a major reconfiguration of the printer system (e.g., the addition of new finishing processes), the values are normally expected…	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.43.30.1.1.1
finDeviceType Defines the type of finishing process associated with this table row entry.	IANA-FINISHER-MIBFinDeviceTypeTC Type Values: 1 other 2 unknown 3 stitcher 4 folder 5 binder 6 trimmer 7 dieCutter 8 puncher 9 perforater 10 slitter 11 separationCutter 12 imprinter 13 wrapper 14 bander 15 makeEnvelope 16 stacker 17 sheetRotator 18 inserter	.1.3.6.1.2.1.43.30.1.1.2
finDevicePresentOnOff Indicates if this finishing device subunit is available and whether the device subunit is enabled.	Printer-MIBPresentOnOffr/w Type Values: 1 other 3 on 4 off 5 notPresent	.1.3.6.1.2.1.43.30.1.1.3
finDeviceCapacityUnit The unit of measure for specifying the capacity of this finisher device subunit.	Printer-MIBPrtCapacityUnitTC Type Values: 1 other 2 unknown 3 tenThousandthsOfInches 4 micrometers 8 sheets 16 feet 17 meters 18 items 19 percent	.1.3.6.1.2.1.43.30.1.1.4
finDeviceMaxCapacity The maximum capacity of this finisher device subunit in finDeviceCapacityUnits. If the device can reliably sense this value, the value is sensed by the finisher device and is read-only: otherwise the val…	Integer32r/w Constraints: range: -2-2147483647	.1.3.6.1.2.1.43.30.1.1.5
finDeviceCurrentCapacity The current capacity of this finisher device subunit in finDeviceCapacityUnits. If the device can reliably sense this value, the value is sensed by the finisher and is read-only: otherwise the value may be written by a…	Integer32r/w Constraints: range: -2-2147483647	.1.3.6.1.2.1.43.30.1.1.6
finDeviceAssociatedMediaPaths Indicates the media paths which can supply media for this finisher device. The value of this object is a bit map in an octet string with each position representing the value of a prtMediaPathIndex. For a media path th…	OctetString Constraints: range: 1-63	.1.3.6.1.2.1.43.30.1.1.7
finDeviceAssociatedOutputs Indicates the printer output subunits this finisher device subunit services. The value of this object is a bit map in an octet string with each position representing the value of a prtOutputIndex. For a…	OctetString Constraints: range: 1-63	.1.3.6.1.2.1.43.30.1.1.8
finDeviceStatus Indicates the current status of this finisher device subunit.	Printer-MIBPrtSubUnitStatusTC Type Constraints: range: 0..126	.1.3.6.1.2.1.43.30.1.1.9
finDeviceDescription A free form text description of this device subunit in the localization specified by prtGeneralCurrentLocalization.	Printer-MIBPrtLocalizedDescriptionStringTC Type Constraints: range: 0..255	.1.3.6.1.2.1.43.30.1.1.10

Each unique source of supply is an entry in the finisher
supply table. Each supply entry has its own
characteristics associated with it such as colorant and
          
current supply level.

finSupplyEntry row .1.3.6.1.2.1.43.31.1.1

A list of finisher devices, with their associated
supplies and supplies characteristics.

Indexes

HOST-RESOURCES-MIBhrDeviceIndex finSupplyIndex

Column	Syntax	OID
finSupplyIndex A unique value used by a finisher to identify this supply container/receptacle. Although these values may change due to a major reconfiguration of the finisher (e.g., the addition of new supply sources to the finisher)…	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.43.31.1.1.1
finSupplyDeviceIndex The value of finDeviceIndex corresponding to the finishing device subunit with which this finisher supply is associated. The value zero indicates the associated finishing device is Unknown.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.43.31.1.1.2
finSupplyClass This value indicates whether this supply entity represents a supply that is consumed or a container that is filled.	Printer-MIBPrtMarkerSuppliesClassTC Type Values: 1 other 3 supplyThatIsConsumed 4 receptacleThatIsFilled	.1.3.6.1.2.1.43.31.1.1.3
finSupplyType The type of this supply.	IANA-PRINTER-MIBPrtMarkerSuppliesTypeTC Type Values: 1 other 2 unknown 3 toner 4 wasteToner 5 ink 6 inkCartridge 7 inkRibbon 8 wasteInk 9 opc 10 developer 11 fuserOil 12 solidWax 13 ribbonWax 14 wasteWax 15 fuser 16 coronaWire 17 fuserOilWick 18 cleanerUnit 19 fuserCleaningPad 20 transferUnit 21 tonerCartridge 22 fuserOiler 23 water 24 wasteWater 25 glueWaterAdditive 26 wastePaper 27 bindingSupply 28 bandingSupply 29 stitchingWire 30 shrinkWrap 31 paperWrap 32 staples 33 inserts 34 covers 35 matteToner 36 matteInk	.1.3.6.1.2.1.43.31.1.1.4
finSupplyDescription The description of this supply/receptacle in text useful for operators and management applications and in the localization specified by prtGeneralCurrentLocalization.	Printer-MIBPrtLocalizedDescriptionStringTC Type Constraints: range: 0..255	.1.3.6.1.2.1.43.31.1.1.5
finSupplyUnit Unit of measure of this finisher supply container or receptacle.	Printer-MIBPrtMarkerSuppliesSupplyUnitTC Type Values: 1 other 2 unknown 3 tenThousandthsOfInches 4 micrometers 7 impressions 8 sheets 11 hours 12 thousandthsOfOunces 13 tenthsOfGrams 14 hundrethsOfFluidOunces 15 tenthsOfMilliliters 16 feet 17 meters 18 items 19 percent	.1.3.6.1.2.1.43.31.1.1.6
finSupplyMaxCapacity The maximum capacity of this supply container/receptacle expressed in Supply Units. If this supply container/ receptacle can reliably sense this value, the value is sensed and is read-only; otherwise the value may be …	Integer32r/w Constraints: range: -2-2147483647	.1.3.6.1.2.1.43.31.1.1.7
finSupplyCurrentLevel The current level if this supply is a container; the remaining space if this supply is a receptacle. If this supply container/receptacle can reliably sense this value, the value is sensed and is read-only; otherwise the…	Integer32r/w Constraints: range: -3-2147483647	.1.3.6.1.2.1.43.31.1.1.8
finSupplyColorName The name of the color associated with this supply.	OctetString Constraints: range: 0-63	.1.3.6.1.2.1.43.31.1.1.9

The input subunits associated with a finisher supply media
are each represented by an entry in this table.

finSupplyMediaInputEntry row .1.3.6.1.2.1.43.32.1.1

A list of finisher supply media input subunit features and
characteristics.

Indexes

HOST-RESOURCES-MIBhrDeviceIndex finSupplyMediaInputIndex

Column	Syntax	OID
finSupplyMediaInputIndex A unique value used by a finisher to identify this supply media input subunit. Although these values may change due to a major reconfiguration of the finisher (e.g., the addition of new supply media input sources to th…	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.43.32.1.1.1
finSupplyMediaInputDeviceIndex The value of finDeviceIndex corresponding to the finishing device subunit with which this finisher media supply is associated. The value zero indicates the associated device is unknown.	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.43.32.1.1.2
finSupplyMediaInputSupplyIndex The value of finSupplyIndex corresponding to the finishing supply subunit with which this finisher media supply is associated. The value zero indicates the associated finishing supply is unknown or there is no applicab…	Integer32 Constraints: range: 0-65535	.1.3.6.1.2.1.43.32.1.1.3
finSupplyMediaInputType The type of technology (discriminated primarily according to the feeder mechanism type) employed by the input subunit.	IANA-PRINTER-MIBPrtInputTypeTC Type Values: 1 other 2 unknown 3 sheetFeedAutoRemovableTray 4 sheetFeedAutoNonRemovableTray 5 sheetFeedManual 6 continuousRoll 7 continuousFanFold 8 sheetFeedPull	.1.3.6.1.2.1.43.32.1.1.4
finSupplyMediaInputDimUnit The unit of measure for specifying dimensional values for this input device.	Printer-MIBPrtMediaUnitTC Type Values: 3 tenThousandthsOfInches 4 micrometers	.1.3.6.1.2.1.43.32.1.1.5
finSupplyMediaInputMediaDimFeedDir This object provides the value of the dimension in the feed direction of the media that is placed or will be placed in this input device. Feed dimension measurements are taken parallel to the feed direction of the devi…	Integer32r/w Constraints: range: -2-2147483647	.1.3.6.1.2.1.43.32.1.1.6
finSupplyMediaInputMediaDimXFeedDir This object provides the value of the dimension across the feed direction of the media that is placed or will be placed in this input device. The cross feed direction is ninety degrees relative to the feed direction on…	Integer32r/w Constraints: range: -2-2147483647	.1.3.6.1.2.1.43.32.1.1.7
finSupplyMediaInputStatus This value indicates the current status of this input device.	Printer-MIBPrtSubUnitStatusTC Type Constraints: range: 0..126	.1.3.6.1.2.1.43.32.1.1.8
finSupplyMediaInputMediaName The name of the current media contained in this input device. Examples are Engineering Manual Cover, Section A Tab Divider or any ISO standard names.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.2.1.43.32.1.1.9
finSupplyMediaInputName The name assigned to this input subunit.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.2.1.43.32.1.1.10
finSupplyMediaInputDescription A free form text description of this input subunit in the localization specified by prtGeneralCurrentLocalization.	Printer-MIBPrtLocalizedDescriptionStringTC Type Constraints: range: 0..255	.1.3.6.1.2.1.43.32.1.1.11
finSupplyMediaInputSecurity Indicates if this subunit has some security associated with it.	Printer-MIBPresentOnOffr/w Type Values: 1 other 3 on 4 off 5 notPresent	.1.3.6.1.2.1.43.32.1.1.12
finSupplyMediaInputMediaWeight The weight of the media associated with this Input device in grams per meter squared. The value (-1) means other and specifically indicates that the device places no restriction on this parameter. The value (-2) means…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.43.32.1.1.13
finSupplyMediaInputMediaThickness This object identifies the thickness of the input media processed by this document input subunit measured in micrometers. This value may be used by devices (or operators) to set up proper machine tolerances for the fee…	Integer32r/w Constraints: range: -2-2147483647	.1.3.6.1.2.1.43.32.1.1.14
finSupplyMediaInputMediaType The name of the type of medium associated with this input subunit.	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.2.1.43.32.1.1.15

The attribute table defines special parameters that are
applicable only to a minority of the finisher devices.
An attribute table entry is used, rather than unique
objects, to minimize the number of MIB objects and to
allow for expansion without the addition of MIB objects.
Each finisher device is represented by a separate row
in the device subunit attribute table.

finDeviceAttributeEntry row .1.3.6.1.2.1.43.33.1.1

Each entry defines a finisher function parameter that
cannot be represented by an object in the finisher
device subunit table.

Indexes

HOST-RESOURCES-MIBhrDeviceIndex finDeviceIndex finDeviceAttributeTypeIndex finDeviceAttributeInstanceIndex

Column	Syntax	OID
finDeviceAttributeTypeIndex Defines the attribute type represented by this row.	IANA-FINISHER-MIBFinAttributeTypeTC Type Values: 1 other 3 deviceName 4 deviceVendorName 5 deviceModel 6 deviceVersion 7 deviceSerialNumber 8 maximumSheets 9 finProcessOffsetUnits 10 finReferenceEdge 11 finAxisOffset 12 finJogEdge 13 finHeadLocation 14 finOperationRestrictions 15 finNumberOfPositions 16 namedConfiguration 17 finMediaTypeRestriction 18 finPrinterInputTraySupported 19 finPreviousFinishingOperation 20 finNextFinishingOperation 30 stitchingType 31 stitchingDirection 40 foldingType 50 bindingType 80 punchHoleType 81 punchHoleSizeLongDim 82 punchHoleSizeShortDim 83 punchPattern 100 slittingType 130 wrappingType 160 stackOutputType 161 stackOffset 162 stackRotation	.1.3.6.1.2.1.43.33.1.1.1
finDeviceAttributeInstanceIndex An index that allows the discrimination of an attribute instance when the same attribute occurs multiple times for a specific instance of a finisher function. The value of this index shall be 1 if only a single instanc…	Integer32 Constraints: range: 1-65535	.1.3.6.1.2.1.43.33.1.1.2
finDeviceAttributeValueAsInteger Defines the integer value of the attribute. The value of the attribute is represented as an integer if the finAttributeTypeTC description for the attribute has the tag 'INTEGER:'. Depending upon the attr…	Integer32r/w Constraints: range: -2-2147483647	.1.3.6.1.2.1.43.33.1.1.3
finDeviceAttributeValueAsOctets Contains the octet string value of the attribute. The value of the attribute is represented as a string if the finAttributeTypeTC description for the attribute has the tag 'OCTETS:'. Depending upon the a…	OctetStringr/w Constraints: range: 0-63	.1.3.6.1.2.1.43.33.1.1.4