Standard view Table view

IANA-FINISHER-MIB

        This MIB module defines a set of finishing-related
TEXTUAL-CONVENTIONs for use in Finisher MIB (RFC 3806)
and other MIBs which need to specify finishing
mechanism details.
        
Any additions or changes to the contents of this MIB
module require either publication of an RFC, or
Designated Expert Review as defined in RFC 2434,
Guidelines for Writing an IANA Considerations Section
in RFCs.  The Designated Expert will be selected by
the IESG Area Director(s) of the Applications Area.
        
Copyright (C) The Internet Society (2004). The
        
initial version of this MIB module was published
in RFC 3806. For full legal notices see the RFC
itself or see:
http://www.ietf.org/copyrights/ianamib.html

Source file: IANA-FINISHER-MIB
Last revised: 22 May 2014, 00:00 UTC
Identity: ianafinisherMIB
Base OID: 1.3.6.1.2.1.110

Imported Objects

SNMPv2-SMI	mib-2 MODULE-IDENTITY (no object page)
SNMPv2-TC	TEXTUAL-CONVENTION (no object page)

Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'IANA-FINISHER-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'IANA-FINISHER-MIB::ianafinisherMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'IANA-FINISHER-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'IANA-FINISHER-MIB::ianafinisherMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (1)

ianafinisherMIB		`.1.3.6.1.2.1.110`

Dependencies (2) 2 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

IANA-FINISHER-MIBrfcselected
- SNMPv2-SMIrfc2 symbols
- SNMPv2-TCrfc1 symbol
  - SNMPv2-SMIrfcshared1 symbol

Dependency-first compile order

Type Definitions (13)

FinAttributeTypeTC	Enumeration	`other(1)` `deviceName(3)` `deviceVendorName(4)` `deviceModel(5)` `deviceVersion(6)` `deviceSerialNumber(7)` `maximumSheets(8)` `finProcessOffsetUnits(9)` `finReferenceEdge(10)` `finAxisOffset(11)` `finJogEdge(12)` `finHeadLocation(13)` `finOperationRestrictions(14)` `finNumberOfPositions(15)` `namedConfiguration(16)` `finMediaTypeRestriction(17)` `finPrinterInputTraySupported(18)` `finPreviousFinishingOperation(19)` `finNextFinishingOperation(20)` `stitchingType(30)` `stitchingDirection(31)` `foldingType(40)` `bindingType(50)` `punchHoleType(80)` `punchHoleSizeLongDim(81)` `punchHoleSizeShortDim(82)` `punchPattern(83)` `slittingType(100)` `wrappingType(130)` `stackOutputType(160)` `stackOffset(161)` `stackRotation(162)`
FinBindingTypeTC	Enumeration	`other(1)` `unknown(2)` `tape(4)` `plastic(5)` `velo(6)` `perfect(7)` `spiral(8)` `adhesive(9)` `comb(10)` `padding(11)` `plasticMultiRing(12)`
FinDeviceTypeTC	Enumeration	`other(1)` `unknown(2)` `stitcher(3)` `folder(4)` `binder(5)` `trimmer(6)` `dieCutter(7)` `puncher(8)` `perforater(9)` `slitter(10)` `separationCutter(11)` `imprinter(12)` `wrapper(13)` `bander(14)` `makeEnvelope(15)` `stacker(16)` `sheetRotator(17)` `inserter(18)`
FinEdgeTC	Enumeration	`topEdge(3)` `bottomEdge(4)` `leftEdge(5)` `rightEdge(6)`
FinFoldingTypeTC	Enumeration	`other(1)` `unknown(2)` `zFold(3)` `halfFold(4)` `letterFold(5)`
FinPunchHoleTypeTC	Enumeration	`other(1)` `unknown(2)` `round(3)` `oblong(4)` `square(5)` `rectangular(6)` `star(7)`
FinPunchPatternTC	Enumeration	`other(1)` `unknown(2)` `twoHoleUSTop(4)` `threeHoleUS(5)` `twoHoleDIN(6)` `fourHoleDIN(7)` `twentyTwoHoleUS(8)` `nineteenHoleUS(9)` `twoHoleMetric(10)` `swedish4Hole(11)` `twoHoleUSSide(12)` `fiveHoleUS(13)` `sevenHoleUS(14)` `mixed7H4S(15)` `norweg6Hole(16)` `metric26Hole(17)` `metric30Hole(18)`
FinSlittingTypeTC	Enumeration	`other(1)` `unknown(2)` `slitAndSeparate(4)` `slitAndMerge(5)`
FinStackOutputTypeTC	Enumeration	`other(1)` `unknown(2)` `straight(4)` `offset(5)` `crissCross(6)`
FinStitchingAngleTypeTC	Enumeration	`unknown(2)` `horizontal(3)` `vertical(4)` `slanted(5)`
FinStitchingDirTypeTC	Enumeration	`unknown(2)` `topDown(3)` `bottomUp(4)`
FinStitchingTypeTC	Enumeration	`other(1)` `unknown(2)` `stapleTopLeft(4)` `stapleBottomLeft(5)` `stapleTopRight(6)` `stapleBottomRight(7)` `saddleStitch(8)` `edgeStitch(9)` `stapleDual(10)`
FinWrappingTypeTC	Enumeration	`other(1)` `unknown(2)` `shrinkWrap(4)` `paperWrap(5)`