IANA-PRINTER-MIB MIB – Observium MIB Browser

IANA-PRINTER-MIB

        This MIB module defines a set of printing-related
TEXTUAL-CONVENTIONs for use in Printer MIB (RFC 3805),
Finisher MIB (RFC 3806), and other MIBs which need to
specify printing mechanism details.
        
Any additions or changes to the contents of this MIB
module require either publication of an RFC, or
Designated Expert Review as defined in RFC 2434,
Guidelines for Writing an IANA Considerations Section
in RFCs.  The Designated Expert will be selected by
the IESG Area Director(s) of the Applications Area.
        
Copyright (C) The Internet Society (2004). The
initial version of this MIB module was published
in RFC 3805.  For full legal notices see the RFC
itself or see:
http://www.ietf.org/copyrights/ianamib.html

ianaPrinterMIB 1.3.6.1.2.1.109

Imported Objects

SNMPv2-SMI	mib-2 MODULE-IDENTITY
SNMPv2-TC	TEXTUAL-CONVENTION

Type Definitions (14)

PrtAlertCodeTC	Enumeration	`other(1)` `unknown(2)` `coverOpen(3)` `coverClosed(4)` `interlockOpen(5)` `interlockClosed(6)` `configurationChange(7)` `jam(8)` `subunitMissing(9)` `subunitLifeAlmostOver(10)` `subunitLifeOver(11)` `subunitAlmostEmpty(12)` `subunitEmpty(13)` `subunitAlmostFull(14)` `subunitFull(15)` `subunitNearLimit(16)` `subunitAtLimit(17)` `subunitOpened(18)` `subunitClosed(19)` `subunitTurnedOn(20)` `subunitTurnedOff(21)` `subunitOffline(22)` `subunitPowerSaver(23)` `subunitWarmingUp(24)` `subunitAdded(25)` `subunitRemoved(26)` `subunitResourceAdded(27)` `subunitResourceRemoved(28)` `subunitRecoverableFailure(29)` `subunitUnrecoverableFailure(30)` `subunitRecoverableStorageError(31)` `subunitUnrecoverableStorageError(32)` `subunitMotorFailure(33)` `subunitMemoryExhausted(34)` `subunitUnderTemperature(35)` `subunitOverTemperature(36)` `subunitTimingFailure(37)` `subunitThermistorFailure(38)` `doorOpen(501)` `doorClosed(502)` `powerUp(503)` `powerDown(504)` `printerNMSReset(505)` `printerManualReset(506)` `printerReadyToPrint(507)` `inputMediaTrayMissing(801)` `inputMediaSizeChange(802)` `inputMediaWeightChange(803)` `inputMediaTypeChange(804)` `inputMediaColorChange(805)` `inputMediaFormPartsChange(806)` `inputMediaSupplyLow(807)` `inputMediaSupplyEmpty(808)` `inputMediaChangeRequest(809)` `inputManualInputRequest(810)` `inputTrayPositionFailure(811)` `inputTrayElevationFailure(812)` `inputCannotFeedSizeSelected(813)` `outputMediaTrayMissing(901)` `outputMediaTrayAlmostFull(902)` `outputMediaTrayFull(903)` `outputMailboxSelectFailure(904)` `markerFuserUnderTemperature(1001)` `markerFuserOverTemperature(1002)` `markerFuserTimingFailure(1003)` `markerFuserThermistorFailure(1004)` `markerAdjustingPrintQuality(1005)` `markerTonerEmpty(1101)` `markerInkEmpty(1102)` `markerPrintRibbonEmpty(1103)` `markerTonerAlmostEmpty(1104)` `markerInkAlmostEmpty(1105)` `markerPrintRibbonAlmostEmpty(1106)` `markerWasteTonerReceptacleAlmostFull(1107)` `markerWasteInkReceptacleAlmostFull(1108)` `markerWasteTonerReceptacleFull(1109)` `markerWasteInkReceptacleFull(1110)` `markerOpcLifeAlmostOver(1111)` `markerOpcLifeOver(1112)` `markerDeveloperAlmostEmpty(1113)` `markerDeveloperEmpty(1114)` `markerTonerCartridgeMissing(1115)` `mediaPathMediaTrayMissing(1301)` `mediaPathMediaTrayAlmostFull(1302)` `mediaPathMediaTrayFull(1303)` `mediaPathCannotDuplexMediaSelected(1304)` `interpreterMemoryIncrease(1501)` `interpreterMemoryDecrease(1502)` `interpreterCartridgeAdded(1503)` `interpreterCartridgeDeleted(1504)` `interpreterResourceAdded(1505)` `interpreterResourceDeleted(1506)` `interpreterResourceUnavailable(1507)` `interpreterComplexPageEncountered(1509)` `alertRemovalOfBinaryChangeEntry(1801)` `staplerCoverOpen(30203)` `staplerCoverClosed(30204)` `staplerInterlockOpen(30205)` `staplerInterlockClosed(30206)` `staplerConfigurationChange(30207)` `staplerJam(30208)` `staplerMissing(30209)` `staplerLifeAlmostOver(30210)` `staplerLifeOver(30211)` `staplerAlmostEmpty(30212)` `staplerEmpty(30213)` `staplerAlmostFull(30214)` `staplerFull(30215)` `staplerNearLimit(30216)` `staplerAtLimit(30217)` `staplerOpened(30218)` `staplerClosed(30219)` `staplerTurnedOn(30220)` `staplerTurnedOff(30221)` `staplerOffline(30222)` `staplerPowerSaver(30223)` `staplerWarmingUp(30224)` `staplerAdded(30225)` `staplerRemoved(30226)` `staplerResourceAdded(30227)` `staplerResourceRemoved(30228)` `staplerRecoverableFailure(30229)` `staplerUnrecoverableFailure(30230)` `staplerRecoverableStorageError(30231)` `staplerUnrecoverableStorageError(30232)` `staplerMotorFailure(30233)` `staplerMemoryExhausted(30234)` `staplerUnderTemperature(30235)` `staplerOverTemperature(30236)` `staplerTimingFailure(30237)` `staplerThermistorFailure(30238)` `stitcherCoverOpen(30303)` `stitcherCoverClosed(30304)` `stitcherInterlockOpen(30305)` `stitcherInterlockClosed(30306)` `stitcherConfigurationChange(30307)` `stitcherJam(30308)` `stitcherMissing(30309)` `stitcherLifeAlmostOver(30310)` `stitcherLifeOver(30311)` `stitcherAlmostEmpty(30312)` `stitcherEmpty(30313)` `stitcherAlmostFull(30314)` `stitcherFull(30315)` `stitcherNearLimit(30316)` `stitcherAtLimit(30317)` `stitcherOpened(30318)` `stitcherClosed(30319)` `stitcherTurnedOn(30320)` `stitcherTurnedOff(30321)` `stitcherOffline(30322)` `stitcherPowerSaver(30323)` `stitcherWarmingUp(30324)` `stitcherAdded(30325)` `stitcherRemoved(30326)` `stitcherResourceAdded(30327)` `stitcherResourceRemoved(30328)` `stitcherRecoverableFailure(30329)` `stitcherUnrecoverableFailure(30330)` `stitcherRecoverableStorageError(30331)` `stitcherUnrecoverableStorageError(30332)` `stitcherMotorFailure(30333)` `stitcherMemoryExhausted(30334)` `stitcherUnderTemperature(30335)` `stitcherOverTemperature(30336)` `stitcherTimingFailure(30337)` `stitcherThermistorFailure(30338)` `folderCoverOpen(30403)` `folderCoverClosed(30404)` `folderInterlockOpen(30405)` `folderInterlockClosed(30406)` `folderConfigurationChange(30407)` `folderJam(30408)` `folderMissing(30409)` `folderLifeAlmostOver(30410)` `folderLifeOver(30411)` `folderAlmostEmpty(30412)` `folderEmpty(30413)` `folderAlmostFull(30414)` `folderFull(30415)` `folderNearLimit(30416)` `folderAtLimit(30417)` `folderOpened(30418)` `folderClosed(30419)` `folderTurnedOn(30420)` `folderTurnedOff(30421)` `folderOffline(30422)` `folderPowerSaver(30423)` `folderWarmingUp(30424)` `folderAdded(30425)` `folderRemoved(30426)` `folderResourceAdded(30427)` `folderResourceRemoved(30428)` `folderRecoverableFailure(30429)` `folderUnrecoverableFailure(30430)` `folderRecoverableStorageError(30431)` `folderUnrecoverableStorageError(30432)` `folderMotorFailure(30433)` `folderMemoryExhausted(30434)` `folderUnderTemperature(30435)` `folderOverTemperature(30436)` `folderTimingFailure(30437)` `folderThermistorFailure(30438)` `binderCoverOpen(30503)` `binderCoverClosed(30504)` `binderInterlockOpen(30505)` `binderInterlockClosed(30506)` `binderConfigurationChange(30507)` `binderJam(30508)` `binderMissing(30509)` `binderLifeAlmostOver(30510)` `binderLifeOver(30511)` `binderAlmostEmpty(30512)` `binderEmpty(30513)` `binderAlmostFull(30514)` `binderFull(30515)` `binderNearLimit(30516)` `binderAtLimit(30517)` `binderOpened(30518)` `binderClosed(30519)` `binderTurnedOn(30520)` `binderTurnedOff(30521)` `binderOffline(30522)` `binderPowerSaver(30523)` `binderWarmingUp(30524)` `binderAdded(30525)` `binderRemoved(30526)` `binderResourceAdded(30527)` `binderResourceRemoved(30528)` `binderRecoverableFailure(30529)` `binderUnrecoverableFailure(30530)` `binderRecoverableStorageError(30531)` `binderUnrecoverableStorageError(30532)` `binderMotorFailure(30533)` `binderMemoryExhausted(30534)` `binderUnderTemperature(30535)` `binderOverTemperature(30536)` `binderTimingFailure(30537)` `binderThermistorFailure(30538)` `trimmerCoverOpen(30603)` `trimmerCoverClosed(30604)` `trimmerInterlockOpen(30605)` `trimmerInterlockClosed(30606)` `trimmerConfigurationChange(30607)` `trimmerJam(30608)` `trimmerMissing(30609)` `trimmerLifeAlmostOver(30610)` `trimmerLifeOver(30611)` `trimmerAlmostEmpty(30612)` `trimmerEmpty(30613)` `trimmerAlmostFull(30614)` `trimmerFull(30615)` `trimmerNearLimit(30616)` `trimmerAtLimit(30617)` `trimmerOpened(30618)` `trimmerClosed(30619)` `trimmerTurnedOn(30620)` `trimmerTurnedOff(30621)` `trimmerOffline(30622)` `trimmerPowerSaver(30623)` `trimmerWarmingUp(30624)` `trimmerAdded(30625)` `trimmerRemoved(30626)` `trimmerResourceAdded(30627)` `trimmerResourceRemoved(30628)` `trimmerRecoverableFailure(30629)` `trimmerUnrecoverableFailure(30630)` `trimmerRecoverableStorageError(30631)` `trimmerUnrecoverableStorageError(30632)` `trimmerMotorFailure(30633)` `trimmerMemoryExhausted(30634)` `trimmerUnderTemperature(30635)` `trimmerOverTemperature(30636)` `trimmerTimingFailure(30637)` `trimmerThermistorFailure(30638)` `dieCutterCoverOpen(30703)` `dieCutterCoverClosed(30704)` `dieCutterInterlockOpen(30705)` `dieCutterInterlockClosed(30706)` `dieCutterConfigurationChange(30707)` `dieCutterJam(30708)` `dieCutterMissing(30709)` `dieCutterLifeAlmostOver(30710)` `dieCutterLifeOver(30711)` `dieCutterAlmostEmpty(30712)` `dieCutterEmpty(30713)` `dieCutterAlmostFull(30714)` `dieCutterFull(30715)` `dieCutterNearLimit(30716)` `dieCutterAtLimit(30717)` `dieCutterOpened(30718)` `dieCutterClosed(30719)` `dieCutterTurnedOn(30720)` `dieCutterTurnedOff(30721)` `dieCutterOffline(30722)` `dieCutterPowerSaver(30723)` `dieCutterWarmingUp(30724)` `dieCutterAdded(30725)` `dieCutterRemoved(30726)` `dieCutterResourceAdded(30727)` `dieCutterResourceRemoved(30728)` `dieCutterRecoverableFailure(30729)` `dieCutterUnrecoverableFailure(30730)` `dieCutterRecoverableStorageError(30731)` `dieCutterUnrecoverableStorageError(30732)` `dieCutterMotorFailure(30733)` `dieCutterMemoryExhausted(30734)` `dieCutterUnderTemperature(30735)` `dieCutterOverTemperature(30736)` `dieCutterTimingFailure(30737)` `dieCutterThermistorFailure(30738)` `puncherCoverOpen(30803)` `puncherCoverClosed(30804)` `puncherInterlockOpen(30805)` `puncherInterlockClosed(30806)` `puncherConfigurationChange(30807)` `puncherJam(30808)` `puncherMissing(30809)` `puncherLifeAlmostOver(30810)` `puncherLifeOver(30811)` `puncherAlmostEmpty(30812)` `puncherEmpty(30813)` `puncherAlmostFull(30814)` `puncherFull(30815)` `puncherNearLimit(30816)` `puncherAtLimit(30817)` `puncherOpened(30818)` `puncherClosed(30819)` `puncherTurnedOn(30820)` `puncherTurnedOff(30821)` `puncherOffline(30822)` `puncherPowerSaver(30823)` `puncherWarmingUp(30824)` `puncherAdded(30825)` `puncherRemoved(30826)` `puncherResourceAdded(30827)` `puncherResourceRemoved(30828)` `puncherRecoverableFailure(30829)` `puncherUnrecoverableFailure(30830)` `puncherRecoverableStorageError(30831)` `puncherUnrecoverableStorageError(30832)` `puncherMotorFailure(30833)` `puncherMemoryExhausted(30834)` `puncherUnderTemperature(30835)` `puncherOverTemperature(30836)` `puncherTimingFailure(30837)` `puncherThermistorFailure(30838)` `perforaterCoverOpen(30903)` `perforaterCoverClosed(30904)` `perforaterInterlockOpen(30905)` `perforaterInterlockClosed(30906)` `perforaterConfigurationChange(30907)` `perforaterJam(30908)` `perforaterMissing(30909)` `perforaterLifeAlmostOver(30910)` `perforaterLifeOver(30911)` `perforaterAlmostEmpty(30912)` `perforaterEmpty(30913)` `perforaterAlmostFull(30914)` `perforaterFull(30915)` `perforaterNearLimit(30916)` `perforaterAtLimit(30917)` `perforaterOpened(30918)` `perforaterClosed(30919)` `perforaterTurnedOn(30920)` `perforaterTurnedOff(30921)` `perforaterOffline(30922)` `perforaterPowerSaver(30923)` `perforaterWarmingUp(30924)` `perforaterAdded(30925)` `perforaterRemoved(30926)` `perforaterResourceAdded(30927)` `perforaterResourceRemoved(30928)` `perforaterRecoverableFailure(30929)` `perforaterUnrecoverableFailure(30930)` `perforaterRecoverableStorageError(30931)` `perforaterUnrecoverableStorageError(30932)` `perforaterMotorFailure(30933)` `perforaterMemoryExhausted(30934)` `perforaterUnderTemperature(30935)` `perforaterOverTemperature(30936)` `perforaterTimingFailure(30937)` `perforaterThermistorFailure(30938)` `slitterCoverOpen(31003)` `slitterCoverClosed(31004)` `slitterInterlockOpen(31005)` `slitterInterlockClosed(31006)` `slitterConfigurationChange(31007)` `slitterJam(31008)` `slitterMissing(31009)` `slitterLifeAlmostOver(31010)` `slitterLifeOver(31011)` `slitterAlmostEmpty(31012)` `slitterEmpty(31013)` `slitterAlmostFull(31014)` `slitterFull(31015)` `slitterNearLimit(31016)` `slitterAtLimit(31017)` `slitterOpened(31018)` `slitterClosed(31019)` `slitterTurnedOn(31020)` `slitterTurnedOff(31021)` `slitterOffline(31022)` `slitterPowerSaver(31023)` `slitterWarmingUp(31024)` `slitterAdded(31025)` `slitterRemoved(31026)` `slitterResourceAdded(31027)` `slitterResourceRemoved(31028)` `slitterRecoverableFailure(31029)` `slitterUnrecoverableFailure(31030)` `slitterRecoverableStorageError(31031)` `slitterUnrecoverableStorageError(31032)` `slitterMotorFailure(31033)` `slitterMemoryExhausted(31034)` `slitterUnderTemperature(31035)` `slitterOverTemperature(31036)` `slitterTimingFailure(31037)` `slitterThermistorFailure(31038)` `separationCutterCoverOpen(31103)` `separationCutterCoverClosed(31104)` `separationCutterInterlockOpen(31105)` `separationCutterInterlockClosed(31106)` `separationCutterConfigurationChange(31107)` `separationCutterJam(31108)` `separationCutterMissing(31109)` `separationCutterLifeAlmostOver(31110)` `separationCutterLifeOver(31111)` `separationCutterAlmostEmpty(31112)` `separationCutterEmpty(31113)` `separationCutterAlmostFull(31114)` `separationCutterFull(31115)` `separationCutterNearLimit(31116)` `separationCutterAtLimit(31117)` `separationCutterOpened(31118)` `separationCutterClosed(31119)` `separationCutterTurnedOn(31120)` `separationCutterTurnedOff(31121)` `separationCutterOffline(31122)` `separationCutterPowerSaver(31123)` `separationCutterWarmingUp(31124)` `separationCutterAdded(31125)` `separationCutterRemoved(31126)` `separationCutterResourceAdded(31127)` `separationCutterResourceRemoved(31128)` `separationCutterRecoverableFailure(31129)` `separationCutterUnrecoverableFailure(31130)` `separationCutterRecoverableStorageError(31131)` `separationCutterUnrecoverableStorageError(31132)` `separationCutterMotorFailure(31133)` `separationCutterMemoryExhausted(31134)` `separationCutterUnderTemperature(31135)` `separationCutterOverTemperature(31136)` `separationCutterTimingFailure(31137)` `separationCutterThermistorFailure(31138)` `imprinterCoverOpen(31203)` `imprinterCoverClosed(31204)` `imprinterInterlockOpen(31205)` `imprinterInterlockClosed(31206)` `imprinterConfigurationChange(31207)` `imprinterJam(31208)` `imprinterMissing(31209)` `imprinterLifeAlmostOver(31210)` `imprinterLifeOver(31211)` `imprinterAlmostEmpty(31212)` `imprinterEmpty(31213)` `imprinterAlmostFull(31214)` `imprinterFull(31215)` `imprinterNearLimit(31216)` `imprinterAtLimit(31217)` `imprinterOpened(31218)` `imprinterClosed(31219)` `imprinterTurnedOn(31220)` `imprinterTurnedOff(31221)` `imprinterOffline(31222)` `imprinterPowerSaver(31223)` `imprinterWarmingUp(31224)` `imprinterAdded(31225)` `imprinterRemoved(31226)` `imprinterResourceAdded(31227)` `imprinterResourceRemoved(31228)` `imprinterRecoverableFailure(31229)` `imprinterUnrecoverableFailure(31230)` `imprinterRecoverableStorageError(31231)` `imprinterUnrecoverableStorageError(31232)` `imprinterMotorFailure(31233)` `imprinterMemoryExhausted(31234)` `imprinterUnderTemperature(31235)` `imprinterOverTemperature(31236)` `imprinterTimingFailure(31237)` `imprinterThermistorFailure(31238)` `wrapperCoverOpen(31303)` `wrapperCoverClosed(31304)` `wrapperInterlockOpen(31305)` `wrapperInterlockClosed(31306)` `wrapperConfigurationChange(31307)` `wrapperJam(31308)` `wrapperMissing(31309)` `wrapperLifeAlmostOver(31310)` `wrapperLifeOver(31311)` `wrapperAlmostEmpty(31312)` `wrapperEmpty(31313)` `wrapperAlmostFull(31314)` `wrapperFull(31315)` `wrapperNearLimit(31316)` `wrapperAtLimit(31317)` `wrapperOpened(31318)` `wrapperClosed(31319)` `wrapperTurnedOn(31320)` `wrapperTurnedOff(31321)` `wrapperOffline(31322)` `wrapperPowerSaver(31323)` `wrapperWarmingUp(31324)` `wrapperAdded(31325)` `wrapperRemoved(31326)` `wrapperResourceAdded(31327)` `wrapperResourceRemoved(31328)` `wrapperRecoverableFailure(31329)` `wrapperUnrecoverableFailure(31330)` `wrapperRecoverableStorageError(31331)` `wrapperUnrecoverableStorageError(31332)` `wrapperMotorFailure(31333)` `wrapperMemoryExhausted(31334)` `wrapperUnderTemperature(31335)` `wrapperOverTemperature(31336)` `wrapperTimingFailure(31337)` `wrapperThermistorFailure(31338)` `banderCoverOpen(31403)` `banderCoverClosed(31404)` `banderInterlockOpen(31405)` `banderInterlockClosed(31406)` `banderConfigurationChange(31407)` `banderJam(31408)` `banderMissing(31409)` `banderLifeAlmostOver(31410)` `banderLifeOver(31411)` `banderAlmostEmpty(31412)` `banderEmpty(31413)` `banderAlmostFull(31414)` `banderFull(31415)` `banderNearLimit(31416)` `banderAtLimit(31417)` `banderOpened(31418)` `banderClosed(31419)` `banderTurnedOn(31420)` `banderTurnedOff(31421)` `banderOffline(31422)` `banderPowerSaver(31423)` `banderWarmingUp(31424)` `banderAdded(31425)` `banderRemoved(31426)` `banderResourceAdded(31427)` `banderResourceRemoved(31428)` `banderRecoverableFailure(31429)` `banderUnrecoverableFailure(31430)` `banderRecoverableStorageError(31431)` `banderUnrecoverableStorageError(31432)` `banderMotorFailure(31433)` `banderMemoryExhausted(31434)` `banderUnderTemperature(31435)` `banderOverTemperature(31436)` `banderTimingFailure(31437)` `banderThermistorFailure(31438)` `makeEnvelopeCoverOpen(31503)` `makeEnvelopeCoverClosed(31504)` `makeEnvelopeInterlockOpen(31505)` `makeEnvelopeInterlockClosed(31506)` `makeEnvelopeConfigurationChange(31507)` `makeEnvelopeJam(31508)` `makeEnvelopeMissing(31509)` `makeEnvelopeLifeAlmostOver(31510)` `makeEnvelopeLifeOver(31511)` `makeEnvelopeAlmostEmpty(31512)` `makeEnvelopeEmpty(31513)` `makeEnvelopeAlmostFull(31514)` `makeEnvelopeFull(31515)` `makeEnvelopeNearLimit(31516)` `makeEnvelopeAtLimit(31517)` `makeEnvelopeOpened(31518)` `makeEnvelopeClosed(31519)` `makeEnvelopeTurnedOn(31520)` `makeEnvelopeTurnedOff(31521)` `makeEnvelopeOffline(31522)` `makeEnvelopePowerSaver(31523)` `makeEnvelopeWarmingUp(31524)` `makeEnvelopeAdded(31525)` `makeEnvelopeRemoved(31526)` `makeEnvelopeResourceAdded(31527)` `makeEnvelopeResourceRemoved(31528)` `makeEnvelopeRecoverableFailure(31529)` `makeEnvelopeUnrecoverableFailure(31530)` `makeEnvelopeRecoverableStorageError(31531)` `makeEnvelopeUnrecoverableStorageError(31532)` `makeEnvelopeMotorFailure(31533)` `makeEnvelopeMemoryExhausted(31534)` `makeEnvelopeUnderTemperature(31535)` `makeEnvelopeOverTemperature(31536)` `makeEnvelopeTimingFailure(31537)` `makeEnvelopeThermistorFailure(31538)` `stackerCoverOpen(31603)` `stackerCoverClosed(31604)` `stackerInterlockOpen(31605)` `stackerInterlockClosed(31606)` `stackerConfigurationChange(31607)` `stackerJam(31608)` `stackerMissing(31609)` `stackerLifeAlmostOver(31610)` `stackerLifeOver(31611)` `stackerAlmostEmpty(31612)` `stackerEmpty(31613)` `stackerAlmostFull(31614)` `stackerFull(31615)` `stackerNearLimit(31616)` `stackerAtLimit(31617)` `stackerOpened(31618)` `stackerClosed(31619)` `stackerTurnedOn(31620)` `stackerTurnedOff(31621)` `stackerOffline(31622)` `stackerPowerSaver(31623)` `stackerWarmingUp(31624)` `stackerAdded(31625)` `stackerRemoved(31626)` `stackerResourceAdded(31627)` `stackerResourceRemoved(31628)` `stackerRecoverableFailure(31629)` `stackerUnrecoverableFailure(31630)` `stackerRecoverableStorageError(31631)` `stackerUnrecoverableStorageError(31632)` `stackerMotorFailure(31633)` `stackerMemoryExhausted(31634)` `stackerUnderTemperature(31635)` `stackerOverTemperature(31636)` `stackerTimingFailure(31637)` `stackerThermistorFailure(31638)` `sheetRotatorCoverOpen(31703)` `sheetRotatorCoverClosed(31704)` `sheetRotatorInterlockOpen(31705)` `sheetRotatorInterlockClosed(31706)` `sheetRotatorConfigurationChange(31707)` `sheetRotatorJam(31708)` `sheetRotatorMissing(31709)` `sheetRotatorLifeAlmostOver(31710)` `sheetRotatorLifeOver(31711)` `sheetRotatorAlmostEmpty(31712)` `sheetRotatorEmpty(31713)` `sheetRotatorAlmostFull(31714)` `sheetRotatorFull(31715)` `sheetRotatorNearLimit(31716)` `sheetRotatorAtLimit(31717)` `sheetRotatorOpened(31718)` `sheetRotatorClosed(31719)` `sheetRotatorTurnedOn(31720)` `sheetRotatorTurnedOff(31721)` `sheetRotatorOffline(31722)` `sheetRotatorPowerSaver(31723)` `sheetRotatorWarmingUp(31724)` `sheetRotatorAdded(31725)` `sheetRotatorRemoved(31726)` `sheetRotatorResourceAdded(31727)` `sheetRotatorResourceRemoved(31728)` `sheetRotatorRecoverableFailure(31729)` `sheetRotatorUnrecoverableFailure(31730)` `sheetRotatorRecoverableStorageError(31731)` `sheetRotatorUnrecoverableStorageError(31732)` `sheetRotatorMotorFailure(31733)` `sheetRotatorMemoryExhausted(31734)` `sheetRotatorUnderTemperature(31735)` `sheetRotatorOverTemperature(31736)` `sheetRotatorTimingFailure(31737)` `sheetRotatorThermistorFailure(31738)` `inserterCoverOpen(31803)` `inserterCoverClosed(31804)` `inserterInterlockOpen(31805)` `inserterInterlockClosed(31806)` `inserterConfigurationChange(31807)` `inserterJam(31808)` `inserterMissing(31809)` `inserterLifeAlmostOver(31810)` `inserterLifeOver(31811)` `inserterAlmostEmpty(31812)` `inserterEmpty(31813)` `inserterAlmostFull(31814)` `inserterFull(31815)` `inserterNearLimit(31816)` `inserterAtLimit(31817)` `inserterOpened(31818)` `inserterClosed(31819)` `inserterTurnedOn(31820)` `inserterTurnedOff(31821)` `inserterOffline(31822)` `inserterPowerSaver(31823)` `inserterWarmingUp(31824)` `inserterAdded(31825)` `inserterRemoved(31826)` `inserterResourceAdded(31827)` `inserterResourceRemoved(31828)` `inserterRecoverableFailure(31829)` `inserterUnrecoverableFailure(31830)` `inserterRecoverableStorageError(31831)` `inserterUnrecoverableStorageError(31832)` `inserterMotorFailure(31833)` `inserterMemoryExhausted(31834)` `inserterUnderTemperature(31835)` `inserterOverTemperature(31836)` `inserterTimingFailure(31837)` `inserterThermistorFailure(31838)`
PrtAlertGroupTC	Enumeration	`other(1)` `unknown(2)` `hostResourcesMIBStorageTable(3)` `hostResourcesMIBDeviceTable(4)` `generalPrinter(5)` `cover(6)` `localization(7)` `input(8)` `output(9)` `marker(10)` `markerSupplies(11)` `markerColorant(12)` `mediaPath(13)` `channel(14)` `interpreter(15)` `consoleDisplayBuffer(16)` `consoleLights(17)` `alert(18)` `finDevice(30)` `finSupply(31)` `finSupplyMediaInput(32)` `finAttribute(33)`
PrtAlertTrainingLevelTC	Enumeration	`other(1)` `unknown(2)` `untrained(3)` `trained(4)` `fieldService(5)` `management(6)` `noInterventionRequired(7)`
PrtChannelTypeTC	Enumeration	`other(1)` `unknown(2)` `chSerialPort(3)` `chParallelPort(4)` `chIEEE1284Port(5)` `chSCSIPort(6)` `chAppleTalkPAP(7)` `chLPDServer(8)` `chNetwareRPrinter(9)` `chNetwarePServer(10)` `chPort9100(11)` `chAppSocket(12)` `chFTP(13)` `chTFTP(14)` `chDLCLLCPort(15)` `chIBM3270(16)` `chIBM5250(17)` `chFax(18)` `chIEEE1394(19)` `chTransport1(20)` `chCPAP(21)` `chDCERemoteProcCall(22)` `chONCRemoteProcCall(23)` `chOLE(24)` `chNamedPipe(25)` `chPCPrint(26)` `chServerMessageBlock(27)` `chDPMF(28)` `chDLLAPI(29)` `chVxDAPI(30)` `chSystemObjectManager(31)` `chDECLAT(32)` `chNPAP(33)` `chUSB(34)` `chIRDA(35)` `chPrintXChange(36)` `chPortTCP(37)` `chBidirPortTCP(38)` `chUNPP(39)` `chAppleTalkADSP(40)` `chPortSPX(41)` `chPortHTTP(42)` `chNDPS(43)` `chIPP(44)` `chSMTP(45)` `chWSPrint(46)`
PrtConsoleColorTC	Enumeration	`other(1)` `unknown(2)` `white(3)` `red(4)` `green(5)` `blue(6)` `cyan(7)` `magenta(8)` `yellow(9)` `orange(10)`
PrtConsoleDisableTC	Enumeration	`enabled(3)` `disabled(4)`
PrtCoverStatusTC	Enumeration	`other(1)` `unknown(2)` `coverOpen(3)` `coverClosed(4)` `interlockOpen(5)` `interlockClosed(6)`
PrtGeneralResetTC	Enumeration	`notResetting(3)` `powerCycleReset(4)` `resetToNVRAM(5)` `resetToFactoryDefaults(6)`
PrtInputTypeTC	Enumeration	`other(1)` `unknown(2)` `sheetFeedAutoRemovableTray(3)` `sheetFeedAutoNonRemovableTray(4)` `sheetFeedManual(5)` `continuousRoll(6)` `continuousFanFold(7)` `sheetFeedPull(8)`
PrtInterpreterLangFamilyTC	Enumeration	`other(1)` `unknown(2)` `langPCL(3)` `langHPGL(4)` `langPJL(5)` `langPS(6)` `langIPDS(7)` `langPPDS(8)` `langEscapeP(9)` `langEpson(10)` `langDDIF(11)` `langInterpress(12)` `langISO6429(13)` `langLineData(14)` `langMODCA(15)` `langREGIS(16)` `langSCS(17)` `langSPDL(18)` `langTEK4014(19)` `langPDS(20)` `langIGP(21)` `langCodeV(22)` `langDSCDSE(23)` `langWPS(24)` `langLN03(25)` `langCCITT(26)` `langQUIC(27)` `langCPAP(28)` `langDecPPL(29)` `langSimpleText(30)` `langNPAP(31)` `langDOC(32)` `langimPress(33)` `langPinwriter(34)` `langNPDL(35)` `langNEC201PL(36)` `langAutomatic(37)` `langPages(38)` `langLIPS(39)` `langTIFF(40)` `langDiagnostic(41)` `langPSPrinter(42)` `langCaPSL(43)` `langEXCL(44)` `langLCDS(45)` `langXES(46)` `langPCLXL(47)` `langART(48)` `langTIPSI(49)` `langPrescribe(50)` `langLinePrinter(51)` `langIDP(52)` `langXJCL(53)` `langPDF(54)` `langRPDL(55)` `langIntermecIPL(56)` `langUBIFingerprint(57)` `langUBIDirectProtocol(58)` `langFujitsu(59)` `langCGM(60)` `langJPEG(61)` `langCALS1(62)` `langCALS2(63)` `langNIRS(64)` `langC4(65)` `langXPS(66)` `langOpenXPS(67)` `langJDF(68)` `langJMF(69)` `langPPML(70)` `langXHTMLPrint(71)` `langPDFis(72)` `langPDF13(73)` `langPDF14(74)` `langPDF15(75)` `langPDF16(76)` `langPDF17(77)` `langPS2(78)` `langPS3(79)` `langPCL3(80)` `langPCL3GUI(81)` `langPCL5e(82)` `langPCL5c(83)` `langPWGRaster(84)` `langAppleRaster(85)`
PrtMarkerMarkTechTC	Enumeration	`other(1)` `unknown(2)` `electrophotographicLED(3)` `electrophotographicLaser(4)` `electrophotographicOther(5)` `impactMovingHeadDotMatrix9pin(6)` `impactMovingHeadDotMatrix24pin(7)` `impactMovingHeadDotMatrixOther(8)` `impactMovingHeadFullyFormed(9)` `impactBand(10)` `impactOther(11)` `inkjetAqueous(12)` `inkjetSolid(13)` `inkjetOther(14)` `pen(15)` `thermalTransfer(16)` `thermalSensitive(17)` `thermalDiffusion(18)` `thermalOther(19)` `electroerosion(20)` `electrostatic(21)` `photographicMicrofiche(22)` `photographicImagesetter(23)` `photographicOther(24)` `ionDeposition(25)` `eBeam(26)` `typesetter(27)`
PrtMarkerSuppliesTypeTC	Enumeration	`other(1)` `unknown(2)` `toner(3)` `wasteToner(4)` `ink(5)` `inkCartridge(6)` `inkRibbon(7)` `wasteInk(8)` `opc(9)` `developer(10)` `fuserOil(11)` `solidWax(12)` `ribbonWax(13)` `wasteWax(14)` `fuser(15)` `coronaWire(16)` `fuserOilWick(17)` `cleanerUnit(18)` `fuserCleaningPad(19)` `transferUnit(20)` `tonerCartridge(21)` `fuserOiler(22)` `water(23)` `wasteWater(24)` `glueWaterAdditive(25)` `wastePaper(26)` `bindingSupply(27)` `bandingSupply(28)` `stitchingWire(29)` `shrinkWrap(30)` `paperWrap(31)` `staples(32)` `inserts(33)` `covers(34)` `matteToner(35)` `matteInk(36)`
PrtMediaPathTypeTC	Enumeration	`other(1)` `unknown(2)` `longEdgeBindingDuplex(3)` `shortEdgeBindingDuplex(4)` `simplex(5)`
PrtOutputTypeTC	Enumeration	`other(1)` `unknown(2)` `removableBin(3)` `unRemovableBin(4)` `continuousRollDevice(5)` `mailBox(6)` `continuousFanFold(7)`

Objects (1)

ianaPrinterMIB		`.1.3.6.1.2.1.109`