FDRY-MPLS-L2VPN-MIB Table View

This table specifies information about the VLL and VLL-local endpoints which are not
available in the PW tables.

fdryVllEndPointEntry row .1.3.6.1.4.1.1991.1.2.15.2.1.1.1

A row in this table represents a VLL or VLL-local end point for a
pseudo-wire (PW) virtual connection across a packet network.
For a VLL, we would have one instance of this table for a given PW.
For a VLL-local, there …

Indexes

fdryVllEndPointServiceType FOUNDRY-PW-STD-MIBpwIndex FOUNDRY-PW-ENET-STD-MIBpwEnetPwInstance

Column	Syntax	OID
fdryVllEndPointServiceType A service type indicating VLL or VLL-local service for this endpoint. The value vpls(3) is not used in this table.	MplsServiceType Type Values: 1 vll 2 vllLocal 3 vpls	.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.1
fdryVllEndPointVlanTagMode This value indicates the vlan mode for this endpoint. The values, dual(3) and other(4) is not used in this table.	FOUNDRY-SN-SWITCH-GROUP-MIBVlanTagModer/w Type Values: 1 tagged 2 untagged 3 dual	.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.2
fdryVllEndPointClassOfService This value indicates the Class Of Service for this endpoint. For VLL, this value is used to select the appropriate tunnel whose COS value is either same, or almost approaching this value. For VLL-local, this value is ap…	ClassOfServicer/w Type Constraints: range: 0..7 range: 255	.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.3
fdryVllEndPointInHCPkts This value indicates the number of packets ingressing into this endpoint. This counter is not supported in CES/CER platform.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.4
fdryVllEndPointOutHCPkts This value indicates the number of packets egressing out from this endpoint. For VLL-local, this value could be the fdryVllEndPointInHCPkts of the other endpoint of this VLL instance. But since rate limit could be appli…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.5
fdryVllEndPointAdminStatus The desired administrative status of this endpoint. This object MAY be set at any time.	AdminStatusr/w Type Values: 1 up 2 down 3 testing	.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.6
fdryVllEndPointOperStatus This object indicates the operational status of this endpoint. Only values up(1), down(2) are used in this table	FOUNDRY-PW-TC-STD-MIBPwOperStatusTC Type Values: 1 up 2 down 3 testing 4 dormant 5 notPresent 6 lowerLayerDown	.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.7
fdryVllEndPointRowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except this object, and the fdryVllEndPointAdminStatus.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.8
fdryVllEndPointInnerVlanId This value indicates the inner vlan id for this endpoint. Returns 0 if not configured or is not supported.	FOUNDRY-PW-TC-STD-MIBPwVlanCfgr/w Type Constraints: range: 0..4097	.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.9
fdryVllEndPointInHCOctets This value indicates the number of octets ingressing into this endpoint from a Customer Edge (CE) device. This counter is supported in CES/CER platform.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.10
fdryVllEndPointOutHCOctets This value indicates the number of octets egressing out from this endpoint towards the Customer Edge (CE) device. This counter is not supported in CES/CER platform. Within CES/CER, any packet coming in from the tunne…	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.1991.1.2.15.2.1.1.1.11

This table specifies additional information about the VPLS instance configuration
which is not available in the VplsConfigTable. Some of these
objects are configuration specific, some are commands specific 
to that VPLS instance.

fdryVplsEntry row .1.3.6.1.4.1.1991.1.2.15.2.2.2.1

A row in this table represents a VPLS instance. It augments
the vplsConfigTable in the VPLS draft mib.

Indexes

No indexes recorded

Column	Syntax	OID
fdryVplsClassOfService This value indicates the Class Of Service for this VPLS instance. This value is used to select the appropriate tunnel whose COS value is either same, or almost approaching this value.	ClassOfServicer/w Type Constraints: range: 0..7 range: 255	.1.3.6.1.4.1.1991.1.2.15.2.2.2.1.1
fdryVplsMaxMacLearned This value indicates the maximum number of MAC addresses that can be learned by this VPLS instance.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.2.15.2.2.2.1.2
fdryVplsClearMac The Set value of TRUE tells the system to clear all the MAC addresses learned by this VPLS instance. Setting value of FALSE will return an error. During read operations, value FALSE will be returned at all times.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.1991.1.2.15.2.2.2.1.3
fdryVplsVcId The VPLS Instance ID of a given VPLS session.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.2.15.2.2.2.1.4

This table specifies information about the VPLS endpoints which are not
available in the PW mib, or VPLS draft mib.
  This table deprecates fdryVplsEndPointTable, as inner VLAN and ISID
has been added as index to this table.

fdryVplsEndPoint2Entry row .1.3.6.1.4.1.1991.1.2.15.2.2.3.1

A row in this table represents a VPLS end point for a
given VPLS instance. The VPLS instance is represented
by vplsConfigTable and fdryVplsTable.
For a given VPLS instance, there could be multiple instances
of rows wit…

Indexes

VPLS-GENERIC-DRAFT-01-MIBvplsConfigIndex fdryVplsEndPoint2VlanId fdryVplsEndPoint2InnerTagType fdryVplsEndPoint2InnerTag fdryVplsEndPoint2IfIndex

Column	Syntax	OID
fdryVplsEndPoint2VlanId This value specifies the VLAN id value of this endpoint.	FOUNDRY-PW-TC-STD-MIBPwVlanCfg Type Constraints: range: 0..4097	.1.3.6.1.4.1.1991.1.2.15.2.2.3.1.1
fdryVplsEndPoint2InnerTagType This value indicates the inner id for this endpoint. If no inner tag is specified, value invalid(1) is returned.	Enumeration Enumerated Values: 1 invalid 2 innerVlan 3 isid	.1.3.6.1.4.1.1991.1.2.15.2.2.3.1.2
fdryVplsEndPoint2InnerTag This value indicates the inner tag for this endpoint. If the index fdryVplsEndPoint2InnerTagType has value isid(3), then this object will have the ISID value for that endpoint. Valid ISID value is between 256 (0x100…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.2.15.2.2.3.1.3
fdryVplsEndPoint2IfIndex This value specifies the ifIndex value of this endpoint.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.1991.1.2.15.2.2.3.1.4
fdryVplsEndPoint2VlanTagMode This value indicates the vlan mode for this endpoint. The values, dual(3) and other(4) is not used in this table.	FOUNDRY-SN-SWITCH-GROUP-MIBVlanTagModer/w Type Values: 1 tagged 2 untagged 3 dual	.1.3.6.1.4.1.1991.1.2.15.2.2.3.1.5
fdryVplsEndPoint2InHCOctets This counter indicates the number of octets ingressing into this endpoint from the Customer Edge (CE). This object is supported in CES/CER only.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.1991.1.2.15.2.2.3.1.6
fdryVplsEndPoint2Layer2State The L2 state of this VPLS endpoint.	Layer2StateTC Type Values: 1 disabled 2 blocking 3 listening 4 learning 5 preforwarding 6 forwarding	.1.3.6.1.4.1.1991.1.2.15.2.2.3.1.7
fdryVplsEndPoint2OperStatus This object indicates the operational status of this endpoint. Only values up(1), down(2) are used in this table	FOUNDRY-PW-TC-STD-MIBPwOperStatusTC Type Values: 1 up 2 down 3 testing 4 dormant 5 notPresent 6 lowerLayerDown	.1.3.6.1.4.1.1991.1.2.15.2.2.3.1.8
fdryVplsEndPoint2RowStatus This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified except this object.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1991.1.2.15.2.2.3.1.9