VPLS-GENERIC-DRAFT-01-MIB

        Copyright (C) The IETF Trust (2008). The initial
version of this MIB module was published in RFC XXXX.
-- RFC Editor: Please replace XXXX with RFC number & remove
--                    this note.
        
For full legal notices see the RFC itself or see:
http://www.ietf.org/copyrights/ianamib.html
        
This MIB module contains generic managed object definitions
for Virtual Private LAN Services as in [L2VPN-VPLS-LDP] and
[L2VPN-VPLS-BGP]
        
This MIB module enables the use of any underlying Pseudo Wire
network.
    
Source file
VPLS-GENERIC-DRAFT-01-MIB
Last revised
Identity
vplsGenericDraft01MIB
Base OID
1.3.6.1.4.1.1991.3.4.1
Imported Objects
FOUNDRY-PW-TC-STD-MIB PwIndexType
FOUNDRY-SN-ROOT-MIB vplsRoot
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus StorageType TruthValue
VPN-TC-STD-MIB VPNIdOrZero
Net-SNMP examples using the brocade MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'VPLS-GENERIC-DRAFT-01-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'VPLS-GENERIC-DRAFT-01-MIB::vplsGenericDraft01MIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'VPLS-GENERIC-DRAFT-01-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'VPLS-GENERIC-DRAFT-01-MIB::vplsGenericDraft01MIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (36)
.1.3.6.1.4.1.1991.3.4.1
.1.3.6.1.4.1.1991.3.4.1.0
.1.3.6.1.4.1.1991.3.4.1.1
.1.3.6.1.4.1.1991.3.4.1.1.1
.1.3.6.1.4.1.1991.3.4.1.1.2
.1.3.6.1.4.1.1991.3.4.1.1.2.1
Unsigned32
.1.3.6.1.4.1.1991.3.4.1.1.2.1.1
percentageUnsigned32
.1.3.6.1.4.1.1991.3.4.1.1.2.1.10
percentageUnsigned32
.1.3.6.1.4.1.1991.3.4.1.1.2.1.11
.1.3.6.1.4.1.1991.3.4.1.1.2.1.12
Unsigned32
.1.3.6.1.4.1.1991.3.4.1.1.2.1.13
.1.3.6.1.4.1.1991.3.4.1.1.2.1.14
Enumeration
.1.3.6.1.4.1.1991.3.4.1.1.2.1.15
.1.3.6.1.4.1.1991.3.4.1.1.2.1.16
.1.3.6.1.4.1.1991.3.4.1.1.2.1.2
.1.3.6.1.4.1.1991.3.4.1.1.2.1.3
Enumeration
.1.3.6.1.4.1.1991.3.4.1.1.2.1.4
.1.3.6.1.4.1.1991.3.4.1.1.2.1.6
.1.3.6.1.4.1.1991.3.4.1.1.2.1.7
.1.3.6.1.4.1.1991.3.4.1.1.2.1.8
.1.3.6.1.4.1.1991.3.4.1.1.3
.1.3.6.1.4.1.1991.3.4.1.1.3.1
Enumeration
.1.3.6.1.4.1.1991.3.4.1.1.3.1.1
.1.3.6.1.4.1.1991.3.4.1.1.3.1.2
.1.3.6.1.4.1.1991.3.4.1.1.4
.1.3.6.1.4.1.1991.3.4.1.1.4.1
.1.3.6.1.4.1.1991.3.4.1.1.4.1.1
Enumeration
.1.3.6.1.4.1.1991.3.4.1.1.4.1.2
Enumeration
.1.3.6.1.4.1.1991.3.4.1.1.4.1.3
.1.3.6.1.4.1.1991.3.4.1.1.4.1.4
.1.3.6.1.4.1.1991.3.4.1.1.4.1.5
.1.3.6.1.4.1.1991.3.4.1.1.5
.1.3.6.1.4.1.1991.3.4.1.1.6
.1.3.6.1.4.1.1991.3.4.1.2
.1.3.6.1.4.1.1991.3.4.1.2.1
.1.3.6.1.4.1.1991.3.4.1.2.2
Dependencies (7) 7 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (4)
OctetString range: 0..256
OctetString range: 0..256
Enumeration
import(1)
export(2)
both(3)
Unsigned32 range: 1..4294967295
Compliance Statements (2)

OID .1.3.6.1.4.1.1991.3.4.1.2.1.1
Compliance requirement for implementations that
provide full support for VPLS-GENERIC-DRAFT-01-MIB.
Such devices can then be monitored and configured using
this MIB module.
Required groups

OID .1.3.6.1.4.1.1991.3.4.1.2.1.2
Compliance requirement for implementations that only
provide read-only support for VPLS-GENERIC-DRAFT-01-MIB.
Such devices can then be monitored but cannot be
configured using this MIB modules.
Required groups
Object refinements
ObjectAccessSyntaxDescription
vplsConfigName readonly
Write access is not required.
vplsConfigDescr readonly
Write access is not required.
vplsConfigAdminStatus readonly
Write access is not required.
vplsConfigMacLearning readonly
Write access is not required.
vplsConfigDiscardUnknownDest readonly
Write access is not required.
vplsConfigMacAging readonly
Write access is not required.
vplsConfigFwdFullHighWatermark readonly
Write access is not required.
vplsConfigFwdFullLowWatermark readonly
Write access is not required.
vplsConfigRowStatus readonly
Write access is not required.
vplsConfigMtu readonly
Write access is not required.
vplsConfigServiceType readonly
Write access is not required.
vplsPwBindConfigType readonly
Write access is not required.
vplsPwBindType readonly
Write access is not required.
vplsPwBindRowStatus readonly
Write access is not required.
Notifications / Traps (3)
NameOIDDescription
.1.3.6.1.4.1.1991.3.4.1.0.1
The vplsStatusChanged notification is generated
when there is a change in the administrative or
operating status of a VPLS service.
This notification is not supported as VPLS instance is always up.
.1.3.6.1.4.1.1991.3.4.1.0.2
The vplsFwdFullAlarmRaised notification is
generated when the utilization of the Forwarding
database is above the value specified by
vplsConfigFwdFullHighWatermark.
This notification is not supported by the device.
.1.3.6.1.4.1.1991.3.4.1.0.3
The vplsFwdFullAlarmCleared notification is
generated when the utilization of the Forwarding
database is below the value specified by
vplsConfigFwdFullLowWatermark.
This notification is not supported by the device.