FOUNDRY-PW-ENET-STD-MIB

        This MIB module describes a model for managing Ethernet
point-to-point pseudo-wire services over a Packet
Switched Network (PSN).
        
Copyright (C) The IETF Trust (2007).  This version
of this MIB module is part of RFC yyyy;  see the RFC
itself for full legal notices.
-- RFC Editor: replace yyyy with the actual RFC number and remove
-- this note
    
Source file
FOUNDRY-PW-ENET-STD-MIB
Last revised
Identity
pwEnetStdMIB
Base OID
1.3.6.1.4.1.1991.3.1.4
Imported Objects
FOUNDRY-PW-STD-MIB pwIndex
FOUNDRY-PW-TC-STD-MIB PwVlanCfg
FOUNDRY-SN-ROOT-MIB pwe3
IF-MIB InterfaceIndexOrZero
RMON2-MIB ZeroBasedCounter32
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus StorageType
Net-SNMP examples using the brocade MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'FOUNDRY-PW-ENET-STD-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'FOUNDRY-PW-ENET-STD-MIB::pwEnetStdMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'FOUNDRY-PW-ENET-STD-MIB' -M '/opt/observium/mibs/brocade:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'FOUNDRY-PW-ENET-STD-MIB::pwEnetStdMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (19)
.1.3.6.1.4.1.1991.3.1.4
.1.3.6.1.4.1.1991.3.1.4.1
.1.3.6.1.4.1.1991.3.1.4.1.1
.1.3.6.1.4.1.1991.3.1.4.1.1.1
.1.3.6.1.4.1.1991.3.1.4.1.1.1.1
.1.3.6.1.4.1.1991.3.1.4.1.1.1.2
Enumeration
.1.3.6.1.4.1.1991.3.1.4.1.1.1.3
.1.3.6.1.4.1.1991.3.1.4.1.1.1.4
.1.3.6.1.4.1.1991.3.1.4.1.1.1.5
.1.3.6.1.4.1.1991.3.1.4.1.1.1.6
.1.3.6.1.4.1.1991.3.1.4.1.1.1.7
.1.3.6.1.4.1.1991.3.1.4.1.1.1.8
.1.3.6.1.4.1.1991.3.1.4.1.2
.1.3.6.1.4.1.1991.3.1.4.1.2.1
.1.3.6.1.4.1.1991.3.1.4.1.2.1.1
.1.3.6.1.4.1.1991.3.1.4.1.2.1.2
.1.3.6.1.4.1.1991.3.1.4.2
.1.3.6.1.4.1.1991.3.1.4.2.1
.1.3.6.1.4.1.1991.3.1.4.2.2
Dependencies (25) 8 direct · 17 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (2)
Collection of objects for basic Ethernet PW configuration.
.1.3.6.1.4.1.1991.3.1.4.2.1.1
Collection of objects counting various PW level errors.
.1.3.6.1.4.1.1991.3.1.4.2.1.2
Compliance Statements (2)

OID .1.3.6.1.4.1.1991.3.1.4.2.2.1
The compliance statement for agents that provide full
support for the PW-ENET-STD-MIB Module. Such devices
can then be monitored and also be configured using
this MIB module.
Required groups
Object refinements
ObjectAccessSyntaxDescription
pwEnetVlanMode
An implementation MUST support at least the value
noChange(2).
pwEnetPwIfIndex readonly
Write access and values other than zero are
required only for implementations that support
modeling the Ethernet PW in the Etherlike-MIB.
pwEnetRowStatus readonly
active(1), notInService(2), notReady(3)
Support for createAndWait is not required. Support
of notReady is not required for implementations that
do not support signaling.
Support of read-write is not required for
implementations that do not support more than one
VLAN mapping to the same PW.

OID .1.3.6.1.4.1.1991.3.1.4.2.2.2
The compliance statement for agents that provide read-
only support for the PW-ENET-STD-MIB Module. Such
devices can then be monitored but cannot be configured
using this MIB module.
Required groups
Object refinements
ObjectAccessSyntaxDescription
pwEnetPwVlan readonly
Write access is not required.
pwEnetVlanMode readonly
Write access is not required. An implementation
MUST support at least the value noChange(2).
pwEnetPortVlan readonly
Write access is not required.
pwEnetPortIfIndex readonly
Write access is not required.
pwEnetPwIfIndex readonly
Write access is not required. Values other than
zero are required only for implementations that
support modeling the Ethernet PW in the
Etherlike-MIB.
pwEnetRowStatus readonly
active(1), notInService(2), notReady(3)
Write access is not required. Support
of notReady is not required for implementations that
do not support signaling.
pwEnetStorageType readonly
Write access is not required.