EQLVOLUME-MIB Table View

Column Syntax OID

eqliscsiVolumeIndex

This field specifies a unique index for identifing a volume.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.1.1.1

eqliscsiVolumeRowStatus

This field is used indicate the status of this entry.

eqliscsiVolumeDescription

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …

.1.3.6.1.4.1.12740.5.1.7.1.1.2

eqliscsiVolumePsvId

EQL-SECONDARY-KEY
This field is for internal use only.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.1.1.3

eqliscsiVolumeName

EQL-SECONDARY-KEY
This field specifies a user friendly name for a volume.
The name must be unique within a group.
The name must not contain spaces or special characters.
The name can be up to 64 characters in length. Th…

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.5.1.7.1.1.4

eqliscsiVolumeSite

This field specifies the site where the volume resides.
Sites are defined on a per array basis.
Sites are used to define where primary and secondary copies of volume mirror reside.
The default is the default site. This …

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.12740.5.1.7.1.1.5

This field specifies a descriptive string that provides details about the volume.
The description can be up to 128 characters. There is no default value.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.12740.5.1.7.1.1.6

eqliscsiVolumeAccessType

This field specifies access rights for the volume.
The volume can be either read-write or read-only. The default is read-write.

Enumerationr/w

Enumerated Values:

1	read-write
2	read-only

.1.3.6.1.4.1.12740.5.1.7.1.1.7

eqliscsiVolumeSize

This field specifies the volume size in MB. There is no default.
Note: Volume size is round to a multiple of 15MB. For thin provisioned volumes
this value represents the advertized size of the volume and
eqliscsiVolume…

eqliscsiVolumeAdminStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.1.1.8

This field specifies if the volume is set to online or offline by
the administrator. If a volume is offline, it cannot be accessed
by iscsi initiators.

When lost blocks that belong to a particular volume …

Enumerationr/w

Enumerated Values:

1	online
2	offline
3	online-lost-cached-blocks
4	online-control
5	offline-control

.1.3.6.1.4.1.12740.5.1.7.1.1.9

eqliscsiVolumeReservedPercentage

This field specifies what percentage of the volumesize will be reserved for SnapShots.
This space is reserved in addition to the space reserved for the volume.
The default is 100 percent.

eqliscsiVolumeSnapWarningLevel

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.1.1.10

This field specifies when to warn the Administrator that the space reserved for SnapShots.
The warning is sent when the SnapShot Space available drops below the specified percentage.
The default is 20 percent.

Integer32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.12740.5.1.7.1.1.11

eqliscsiVolumeSnapDeletionPolicy

This field specifies what should happen when the space reserved for SnapShots is exhuasted.
The default is delete-oldest SnapShots.

Enumerationr/w

Enumerated Values:

1	make-volume-offline
2	delete-oldest
3	stop-snapshots

.1.3.6.1.4.1.12740.5.1.7.1.1.12

eqliscsiVolumeAutoloadBalancing

This field specifies whether or not the volume should be load balanced across multiple
arrays. The default is load balancing is enabled.

Enumerationr/w

Enumerated Values:

1	on
2	off

.1.3.6.1.4.1.12740.5.1.7.1.1.13

eqliscsiVolumeTargetAlias

This field specifies the iSCSI alias used for the volume.
This field defaults to the volume name.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.12740.5.1.7.1.1.14

eqliscsiVolumeTargetIscsiName

EQL-SECONDARY-KEY
This field specifies the iSCSI target name for the volume.
This name is auto-generated, though users can override the name.

OctetStringr/w

Constraints:
range: 0-223

.1.3.6.1.4.1.12740.5.1.7.1.1.15

eqliscsiVolumeNodeIndex

EQL-SECONDARY-KEY
The arbitrary integer used to uniquely identify this particular
node within the ISCSI mibs. Instances of objects in those MIBS that
are related to this iSCSI target will have this value
of iscsiNodeIn…

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.1.1.16

eqliscsiVolumeHdrDigests

An object used by the manager to enable the use of iSCSI header
digests for this volume. When set to 'true' the iSCSI implementation will
negotiate the use of header digests with initiators.
By default this feature w…

eqliscsiVolumeDataDigests

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.1.1.17

An object used by the manager to enable the use of iSCSI data
digests for this volume.When set to 'true' the iSCSI implementation will
negotiate the use of data digests with initiators.
By default this feature will be …

eqliscsiVolumeCloneSrcPsvId

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.1.1.18

If non-empty, then this volume is a clone of another volume and is waiting
for the data to be copied to it. This field is the PsvId of the source
volume. If value of this field is the empty string then this volume is no…

OctetStringr/w

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.1.1.19

eqliscsiVolumeReplService

Specifies the type of replication services that are provisioned
on the related volume. A volume may either be a replica, a primary
copy, a replication control target, or nothing at all.
Regular replicasets on secondar…

Enumerationr/w

Enumerated Values:

1	none
2	replica-site
3	replicated-primary
4	replica-control-target
5	host-control-target
6	failover
7	pe-control-target

.1.3.6.1.4.1.12740.5.1.7.1.1.20

eqliscsiVolumeMultInitiator

Specifies if the access from multiple initiators is
allowed for the volume.

Enumerationr/w

Enumerated Values:

0	allowed
1	not-allowed

.1.3.6.1.4.1.12740.5.1.7.1.1.21

eqliscsiVolumeStoragePoolIndex

This field specifies a unique index for identifying a storage pool. Thin clones get their pool index from the parent template.

eqliscsiVolumeStoragePoolSourceIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.1.1.22

This field specifies the source storage pool for the volume.
If non-zero, the volume is currently being moved from the
indicated source pool to the target pool (eqliscsiVolumeStoragePoolIndex).

eqliscsiVolumeTargetLocalMemberId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.1.1.23

This field specifies the first part of a unique index for identifing an iSCSI target.

eqliscsiVolumeTargetIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.1.1.24

This field specifies the second part of a unique index for identifing an iSCSI target.

eqliscsiVolumeThinProvision

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.1.1.25

This field specifies if the Volume is enabled for Thin Provisioning.

eqliscsiVolumeMinThinReserve

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.1.1.26

This field specifies the amount of pool free space that is currently reserved
for this Thin Provisioned Volume configured as percentage of eqliscsiVolumeSize.

Unsigned32r/w

Constraints:
range: 0-100

.1.3.6.1.4.1.12740.5.1.7.1.1.27

eqliscsiVolumeThinWarnPercentage

This field specifies the percentage of Advertised Size for which we send a WARNING
Message when the Allocated Volume Size reaches it. Default value is eqlGroupDefaultThinWarn.

Unsigned32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.12740.5.1.7.1.1.28

eqliscsiVolumeThinMaxGrowPercentage

This field specifies the percentage of Advertised Volume Size for which we
take the volume offline when the Allocated Volume Size reaches it.
Default value is eqlGroupDefaultThinMaxGrow.

Unsigned32r/w

Constraints:
range: 1-100

.1.3.6.1.4.1.12740.5.1.7.1.1.29

eqliscsiVolumeShrinkAutoAdjust

This field specifies whether snap-reserve should be adjusted automatically when shrinking or growing a volume.
Default value is true.
Example 1: If volume size is 1500MB, snap-reserve is 100%(1500MB) and snap-reserve u…

eqliscsiVolumeReplRollbackSeqNum

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.1.1.30

This field specifies the seq number of snap from which this volume was rolled back as part of demote or as part of replicaset rollback.

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.12740.5.1.7.1.1.31

eqliscsiVolumeThinWarnMode

Specifies if the way Thin Provisioning feature will implement the
Warning Threasholds.
If 'warnWithOffline', the user will receive event warnings
as they hit the Warning Threshold. When the user hits the MaxGrow
Thre…

Enumerationr/w

Enumerated Values:

0	warnWithOffline
1	warnWithIscsi
2	warnWithOfflineForced
3	warnWithSoftOnly
4	warnWithHardOnly

.1.3.6.1.4.1.12740.5.1.7.1.1.32

eqliscsiVolumeFlags

This field defines the common place holder for Volume operational flags.

Bitsr/w

Enumerated Values:

0	iSNSDiscoverable
1	isUnmanaged
2	isPoolSyncReplicated
3	flag3
4	flag4
5	flag5
6	isNASVolume
7	isSyncRepAfoEnabled
8	flag8
9	syncReplAllowUnprotectedAccess
10	isDeleted
11	flags11
12	flag12
13	flag13
14	flag14
15	flag15
16	flag16
17	flag17
18	flag18
19	flag19
20	flag20
21	flag21
22	flag22
23	flag23
24	flag24
25	flag25
26	flag26
27	flag27
28	flag28
29	flag29
30	flag30
31	flag31

.1.3.6.1.4.1.12740.5.1.7.1.1.33

eqliscsiVolumeTemplate

This field specifies if the Volume is a Template Volume.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.1.1.34

eqliscsiVolumeThinClone

This field specifies if the Volume is a Thin Clone Volume.

eqliscsiVolumeThinCloneParentMemberId

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.1.1.35

If the entry has indicated that this is a Thin Clone Volume, then this
field will specify the Parent Index's MemberId.

eqliscsiVolumeThinCloneParentVolIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.1.1.36

If the entry has indicated that this is a Thin Clone Volume, then this
field will specify the Parent Index's VolumeIndex.

eqliscsiVolumeThinCloneParentPsvId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.1.1.37

If non-empty, then this volume is a Thin Clone of a Template Volume. This field
is the PsvId of the Template Volume.

OctetStringr/w

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.1.1.38

eqliscsiVolumeAdminAccountKey

This field specifies the unique key for identifying a volume administrator
that owns this volume. If no account has this value as its
eqlStorageGroupAdminAccountKey, then the volume is unassigned.

eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiSnapshotIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.1.1.39

eqliscsiVolumeSCSIQErr

This description is from T10/1799D sbc-3 rev 19. The following quote is from section 7.4.6 Control mode page.

The queue error management (QERR) field specifies how the device server shall handle other ta…

Enumerationr/w

Enumerated Values:

0	none
1	zeroZero
2	zeroOne
3	oneZero
4	oneOne
5	allCommandsAborted

.1.3.6.1.4.1.12740.5.1.7.1.1.40

eqliscsiVolumeBorrow

This field specifies if this Volume is allowed to borrow.
All the volumes including replica sets created in V6.0.0
have this MIB variable set to 'enabled' although V6.0.0
doesn't support delegated space borrowing yet.

StatusAutoDefaultr/w

Type Values:

0	auto
1	enabled
2	disabled

.1.3.6.1.4.1.12740.5.1.7.1.1.41

eqliscsiVolumeSectorSize

This field specifies, in bytes, the sector size of this volume.

Enumerationr/w

Enumerated Values:

0	sector-size-512-bytes
1	sector-size-4096-bytes

.1.3.6.1.4.1.12740.5.1.7.1.1.42

eqliscsiSnapshotTable

table

.1.3.6.1.4.1.12740.5.1.7.2 · 1 row entry · 26 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiSnapshotTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiSnapshotTable'

EqualLogic-Persistent Storage Volume Snap Shot Table
TimeoutCreate:60 TimeoutDelete:60

eqliscsiSnapshotEntry row .1.3.6.1.4.1.12740.5.1.7.2.1

An entry (row) containing snap shot info.

Indexes

Column Syntax OID

eqliscsiSnapshotIndex

This field specifies a unique index which identifies a volume SnapShot.

eqliscsiSnapshotRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.2.1.1

The rowstatus....

eqliscsiSnapshotBasePsvId

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.2.1.2

eqliscsiSnapshotPsvId

EQL-SECONDARY-KEY
This field contains an internal key for identifing a SnapShot.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.2.1.3

EQL-SECONDARY-KEY
This field contains an internal key which identifies the volume the SnapShot is associated with.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.2.1.4

eqliscsiSnapshotName

This field specifies the friendly name used to identify a SnapShot.
The name is auto-generated based on the volume name, though it can be
overriden by the administrator.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.12740.5.1.7.2.1.5

eqliscsiSnapshotAccessType

This field specifies the access type for a SnapShot.
The valid access types are read-write and read-only.
The default access type is read-write.

Enumerationr/w

Enumerated Values:

1	read-write
2	read-only

.1.3.6.1.4.1.12740.5.1.7.2.1.6

eqliscsiSnapshotSize

This field specifies the amount of space in MB a SnapShot consumes.
Note: Deleting the SnapShot is not guaranteed to return the space specified,
since a single block can be associated with multiple SnapShots. This value…

eqliscsiSnapshotAdminStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.2.1.7

This field specifies whether a SnapShot is online or not.
In order for an iSCSI initiator to access a snapshot it must be
online. The default is offline.

Enumerationr/w

Enumerated Values:

1	online
2	offline
3	online-lost-cached-blocks

.1.3.6.1.4.1.12740.5.1.7.2.1.8

eqliscsiSnapshotTimestamp

EQL-SECONDARY-KEY
This field specifies the creation time for volume.
Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.

eqliscsiSnapshotScheduleName

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.2.1.9

This field specifies the schedule used for SnapShots.
The SnapShot schedule is configured independently and then
applied to individual volumes.
The default is no schedule is set.

OctetString

Constraints:
range: 0-64

.1.3.6.1.4.1.12740.5.1.7.2.1.10

eqliscsiSnapshotRollBack

This field specifies whether or not to roll a SnapShot back to a specified SnapShot.
This shouldn't be a TruthValue, instead it should be the SnapShot number to roll back to.
There is no default.

eqliscsiSnapshotTargetAlias

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.2.1.11

This field specifies what iSCSI alias will be used to identify the SnapShot.
The alias is autogenerated by default, though it can be overriden.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.12740.5.1.7.2.1.12

eqliscsiSnapshotTargetIscsiName

EQL-SECONDARY-KEY
This field specifies what iSCSI name will be used to identify the SnapShot.
The name is autogenerated by default, though it can be overriden.

OctetStringr/w

Constraints:
range: 0-223

.1.3.6.1.4.1.12740.5.1.7.2.1.13

eqliscsiSnapshotScheduleIndex

EQL-SECONDARY-KEY
This field specifies the index of the snapshot policy if it is created
by a snapshotpolicy, otherwise it will be set to zero. If the policy
is deleted after the snapshot is created, this will be reset …

eqliscsiSnapshotDescription

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.2.1.14

This field specifies a descriptive string that administrator can add to provide details about the snapshot.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.12740.5.1.7.2.1.15

eqliscsiSnapshotNodeIndex

eqliscsiSnapshotReplicated

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.2.1.16

When a row is created with this object set to a non zero value, and
a replication relationship has been configured for the base
volume, the snapshot will be queued to be replicated to the
remote location indicated by th…

eqliscsiSnapshotCollectionIndex

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.12740.5.1.7.2.1.17

eqliscsiSnapshotType

Specifies the type of snapshot. Snapshot is of type of replica-site when
the parent volume is of type replica-site.

Enumeration

Enumerated Values:

1	regular
2	replica-site
3	sync-repl-protected
4	sync-repl-failback

.1.3.6.1.4.1.12740.5.1.7.2.1.18

The eqliscsiSnapCollectionIndex if this snap is part of a group.
Otherwise the value will be set to zero.

eqliscsiSnapshotStoragePoolIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.2.1.19

This field specifies a unique index for identifying a storage pool.

eqliscsiSnapshotTargetLocalMemberId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.2.1.20

This field specifies the first part of a unique index for identifing an iSCSI target.

eqliscsiSnapshotTargetIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.2.1.21

This field specifies the second part of a unique index for identifing an iSCSI target.

eqliscsiSnapshotMultInitiator

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.2.1.22

Specifies if the access from multiple initiators is
allowed for the snapshot.

Enumerationr/w

Enumerated Values:

0	allowed
1	not-allowed

.1.3.6.1.4.1.12740.5.1.7.2.1.23

eqliscsiSnapshotFlags

This field defines the common place holder for Snapshot operational flags. The flags must be of type
enable(1) or disable(0), and the default will always be disable(0).

Bitsr/w

Enumerated Values:

0	iSNSDiscoverable
1	externalPauseReplication
2	compressible
3	flag3
4	flag4
5	flag5
6	flag6
7	flag7
8	flag8
9	flag9
10	flag10
11	flag11
12	flag12
13	flag13
14	flag14
15	flag15
16	flag16
17	flag17
18	flag18
19	flag19
20	flag20
21	flag21
22	flag22
23	flag23
24	flag24
25	flag25
26	flag26
27	flag27
28	flag28
29	flag29
30	flag30
31	flag31

.1.3.6.1.4.1.12740.5.1.7.2.1.24

eqliscsiSnapshotCompressionDelay

The minimum amount of time (minutes) to wait before allowing this snapshot to be compressed.

minutesSNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.2.1.25

eqliscsiSnapshotLifeExpectancy

The amount of time (minutes) this snapshot is estimated to be around.

minutesSNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.2.1.26

eqliscsiVolumeMemberTable

table

.1.3.6.1.4.1.12740.5.1.7.3 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeMemberTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeMemberTable'

EqualLogic-Dynamic Volume Member Table

eqliscsiVolumeMemberEntry row .1.3.6.1.4.1.12740.5.1.7.3.1

An entry (row) containing volume member info.

Indexes

eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiVolumeMemberIndex

Column	Syntax	OID
eqliscsiVolumeMemberIndex This field specifies the index for the Member Volume table.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.12740.5.1.7.3.1.1`
eqliscsiVolumeMemberPssId EQL-SECONDARY-KEY This field contains the internal id for the Member which hosts a slice of the volume.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.12740.5.1.7.3.1.2`
eqliscsiVolumeMemberShareOfVolume This field contains storage allocated to the volume on the specified member. The storage is specified in MBs.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.12740.5.1.7.3.1.3`

eqliscsiVolumeInitiatorsTable

table deprecated

.1.3.6.1.4.1.12740.5.1.7.4 · 1 row entry · 2 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeInitiatorsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeInitiatorsTable'

This table is used to gather information about the iSCSI Initiators connected
to a specified volume.

eqliscsiVolumeInitiatorsEntry row .1.3.6.1.4.1.12740.5.1.7.4.1

An entry (row) containing Initiator data.

Indexes

eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiVolumeInitiatorsIndex

Column	Syntax	OID
eqliscsiVolumeInitiatorsIndex This field specifies the index to the Volume Initiator table. The list is created from the iSCSI Initiators connected to a volume.	SNMPv2-SMIInteger32 Type Constraints: `range: -2147483648..2147483647`	`.1.3.6.1.4.1.12740.5.1.7.4.1.1`
eqliscsiVolumeInitiatorsName This field specifies the name of the iSCSI Initiator accessing this volume.	OctetString Constraints: `range: 0-223`	`.1.3.6.1.4.1.12740.5.1.7.4.1.2`

eqliscsiVolumeSnapshotPolicyTable

table

.1.3.6.1.4.1.12740.5.1.7.5 · 1 row entry · 19 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeSnapshotPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeSnapshotPolicyTable'

EqualLogic-Persistent Storage SnapSnot Policy Table.

eqliscsiVolumeSnapshotPolicyEntry row .1.3.6.1.4.1.12740.5.1.7.5.1

An entry (row) containing snapshot scheduling policy
information.The policy determines when to create
snapshot(s) of a volume.

Indexes

eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiVolumeSnapshotPolicyIndex

Column Syntax OID

eqliscsiVolumeSnapshotPolicyIndex

This value uniquely identifies the snapshot policies for a volume.

eqliscsiVolumeSnapshotPolicyRowStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.5.1.1

This value is used to manage the conceptual row.

eqliscsiVolumeSnapshotPolicyName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.5.1.2

This value specifies user friendly name for the policy.
It is unique within the context of a volume. Spaces are not allowed.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.5.1.7.5.1.3

eqliscsiVolumeSnapshotPolicyAccessType

Snapshots created using this policy will have accesstype same as the
value of this object.

Enumerationr/w

Enumerated Values:

1	read-write
2	read-only

.1.3.6.1.4.1.12740.5.1.7.5.1.4

eqliscsiVolumeSnapshotPolicyStatus

Snapshots created using this policy will have status same as the
value of this object.

Enumerationr/w

Enumerated Values:

1	online
2	offline

.1.3.6.1.4.1.12740.5.1.7.5.1.5

eqliscsiVolumeSnapshotPolicyMaxKeep

The value of this object determines the maximum no of snapshots
created by this policy that can exist at a given time. When number
of snapshots created by this policy reaches this value, for creating
a new snapshot olde…

snapshotsInteger32r/w

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.12740.5.1.7.5.1.6

eqliscsiVolumeSnapshotPolicyType

The value of this object determines the basic type of this policy.
Except when set to once, the effective repetition period of the
policy is determined using the value of this object along with
the value of eqliscsiVol…

Enumerationr/w

Enumerated Values:

1	once
2	daily
3	weekly
4	monthly
5	hourly

.1.3.6.1.4.1.12740.5.1.7.5.1.7

eqliscsiVolumeSnapshotPolicyRepeatFactor

The value of this object along with eqliscsiVolumeSnapshotPolicyType
determines the effective repetition interval for this policy.
The valid values are

PolicyType RepeatFactor
once …

Integer32r/w

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.12740.5.1.7.5.1.8

eqliscsiVolumeSnapshotPolicyStartTime

The value of this object represents the time to start creating
snapshot(s) within a day expressed as number of minutes
from 12:00AM. The maximum value for this column is 24*60-1 which
represents 11:59PM.

minutesInteger32r/w

Constraints:
range: 0-1439

.1.3.6.1.4.1.12740.5.1.7.5.1.9

eqliscsiVolumeSnapshotPolicyEndTime

The value of this object represents the time to stop creating
snapshot(s) within a day expressed as number of minutes
from 12:00AM. The maximum value for this column is 24*60-1 which
represents 11:59PM.
…

minutesInteger32r/w

Constraints:
range: 0-1439

.1.3.6.1.4.1.12740.5.1.7.5.1.10

eqliscsiVolumeSnapshotPolicyTimeFrequency

The value of this object determines how frequent snapshots must be
taken between start time and end time. This value doesn't have
significance when policy type is set to once. For other policytypes,
the value of end t…

minutesInteger32r/w

Constraints:
range: 0-1439

.1.3.6.1.4.1.12740.5.1.7.5.1.11

eqliscsiVolumeSnapshotPolicyStartDate

The value of this object determines the date from which the policy
will be active. By default, this is the policy creation date.
The value is expressed as number of days since epoch.

daysInteger32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.12740.5.1.7.5.1.12

eqliscsiVolumeSnapshotPolicyEndDate

The value of this object determines the date after which the policy
will be inactive.It doesnt have significance when policy type
is once. Default value is the mamixum value allowed. When set to maximum
value, the polic…

daysInteger32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.12740.5.1.7.5.1.13

eqliscsiVolumeSnapshotPolicyWeekMask

The value of this column is significant only if policytype is
set to weekly or monthly. When the value is 0x7fffffff, it
represents a special meaning to the value of occurence. See
the description for occurence below.…

eqliscsiVolumeSnapshotPolicyMonthMask

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.5.1.14

The value of this column is currently not being used.

eqliscsiVolumeSnapshotPolicyNextCreate

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.5.1.15

EQL-SECONDARY-KEY
The value of this column represents number of seconds since epoch
at which the next snapshot by this policy is going to be created.

eqliscsiVolumeSnapshotPolicyOccurence

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.5.1.16

The value of this column is significant only if the policy type is
set to monthly.

If weekmask is set to 0x7fffffff, the value of this column represents
the occurence of a day with in a month. Example:If …

eqliscsiVolumeSnapshotPolicyReplication

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.5.1.17

When a row is created with this object set to a non-zero value, and
a replication relationship has been configured for the base
volume, the snapshots created will be queued to be replicated to the
remote location as def…

eqliscsiVolumeSnapshotPolicyAdminStatus

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.12740.5.1.7.5.1.18

When disabled, the schedule will stop creating snapshots until re-enabled.

Enumerationr/w

Enumerated Values:

0	enable
1	disable

.1.3.6.1.4.1.12740.5.1.7.5.1.19

eqliscsiVolumeACLTable

table

.1.3.6.1.4.1.12740.5.1.7.6 · 1 row entry · 15 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeACLTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeACLTable'

EqualLogic-Persistent-ReplicateOnCreate volume access table.
This table contains a collection of volume access records.
One table entry per access record. It is indexed by group id, volume,
index and volume access record index.
The number of entries equal to the number of volume access records specified by the user.

eqliscsiVolumeACLEntry row .1.3.6.1.4.1.12740.5.1.7.6.1

An entry (row) containing volume access parameters to this target.

Indexes

eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiVolumeACLIndex

Column Syntax OID

eqliscsiVolumeACLIndex

The index value that uniquely identifies the volume access record.

eqliscsiVolumeACLInitiatorName

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.6.1.1

The name of iscsi initiator permitted to access the volume.
If the name is an empty string or * then any initiator is allowed to access.

OctetStringr/w

Constraints:
range: 0-223

.1.3.6.1.4.1.12740.5.1.7.6.1.2

eqliscsiVolumeACLInitiatorIpAddress

This field is deprecated and will be unsupported in the next release.

eqliscsiVolumeACLInitiatorAuthenticationMethod

Type Constraints:
range: 4

.1.3.6.1.4.1.12740.5.1.7.6.1.3

The authentication method to be used for initiator authentication.

Enumerationr/w

Enumerated Values:

1	chap5
2	chap-local
3	srp-local
4	none

.1.3.6.1.4.1.12740.5.1.7.6.1.4

eqliscsiVolumeACLInitiatorUserNamedeprecated

EQL-SECONDARY-KEY
The user name to be used for initiator authentication if the authentication method
is CHAP5 local or SRP local.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.12740.5.1.7.6.1.5

eqliscsiVolumeACLInitiatorUserPassword

The user name to be used for initiator authentication if the authentication method
is CHAP5 local or SRP local

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.12740.5.1.7.6.1.6

eqliscsiVolumeACLTargetType

The target type to be authenticated.

ACLAppliesTor/w

Type Values:

1	volume-only
2	snapshot-only
3	volume-and-snapshot

.1.3.6.1.4.1.12740.5.1.7.6.1.7

eqliscsiVolumeACLRowStatus

The volume acl row status.

eqliscsiVolumeACLInitiatorUserName2

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.6.1.8

EQL-SECONDARY-KEY
The 256 byte character name user name to be used for initiator
authentication if the authentication method
is CHAP5 local or SRP local. This field supercedes the deprecated
128 byte field that perfor…

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.12740.5.1.7.6.1.9

eqliscsiVolumeACLAuthType

The authentication type used. Currently it is set only by
vds and should be left alone by the PSA firmware and non-vds
PSA configuration tools.

Enumerationr/w

Enumerated Values:

0	not-set
1	none
2	eql-psg-chap
3	radius
4	ms-vds
5	mpio

.1.3.6.1.4.1.12740.5.1.7.6.1.10

eqliscsiVolumeACLInitiatorIpWildcard

This field is deprecated and will be unsupported in the next release.

eqliscsiVolumeACLInitiatorInetAddressType

Type Constraints:
range: 4

.1.3.6.1.4.1.12740.5.1.7.6.1.11

The ip address of the iscsi initiator permitted to access the volume
in the form of x.x.x.number.
If the number is zero then any ip address with the value from x.x.x.1 to x.x.x.255
is permitted to access the volume.
If…

eqliscsiVolumeACLInitiatorInetAddress

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.5.1.7.6.1.12

eqliscsiVolumeACLInitiatorInetWildcardType

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.5.1.7.6.1.13

The wildcard mask defines which portion of eqliscsiVolumeACLInitiatorInetAddress that
does not have to match for the initiator to be permitted access to the volume.
The wildcard mask is expressed in the form x.x.x.x, wh…

eqliscsiVolumeACLInitiatorInetWildcard

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.5.1.7.6.1.14

eqliscsiVolumeStatusPsvId

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.5.1.7.6.1.15

eqliscsiVolumeStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.7 · 1 row entry · 20 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeStatusTable'

EqualLogic-Dynamic Storage Volume Table.
This table contains a list of volumes in a group and their stats.

eqliscsiVolumeStatusEntry row .1.3.6.1.4.1.12740.5.1.7.7.1

An entry (row) containing volume stats.

Indexes

No indexes recorded

Column Syntax OID

This field is for internal use only.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.7.1.1

eqliscsiVolumeStatusReservedSpace

This field specifies how many MB of space is reserved for
snapshots of this volume.
This is a dynamic value, it is not Administrator setable.

eqliscsiVolumeStatusReservedSpaceAvail

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.7.1.2

This field specifies how many MB of reserved space that is unused
by the snapshots.

eqliscsiVolumeStatusActualMemberCount

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.7.1.3

This field specifies the number of members this
volume is spread across. It must be equal to number
of rows in VolumeMemberTable for this volume.

eqliscsiVolumeStatusNumSnapshots

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.7.1.4

Indicates the number of snapshots that the system is
maintaining on the specified volume

eqliscsiVolumeStatusCreationTime

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.7.1.5

Indicates the local system time when the specified
volume was created

SNMPv2-TCDateAndTime

Type Constraints:
range: 8
range: 11

Description:

A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …

.1.3.6.1.4.1.12740.5.1.7.7.1.6

eqliscsiVolumeStatusAvailable

Indicates the local system time when the specified
volume was created

Enumeration

Enumerated Values:

1	available
2	membersMissing

.1.3.6.1.4.1.12740.5.1.7.7.1.7

eqliscsiVolumeStatusOperStatus

This field specifies the current operational status of the
volume.

Enumeration

Enumerated Values:

1	available
2	not-available
3	not-available-due-to-snap-reserve-met
4	not-available-due-to-members-offline
5	not-available-due-to-lost-cached-blocks
6	not-available-due-to-thin-max-growth-met
7	not-available-due-to-nospace-for-auto-grow
8	not-available-due-to-missing-pages
9	not-available-due-to-syncrep
10	available-no-new-connections
11	not-available-due-to-internal-error

.1.3.6.1.4.1.12740.5.1.7.7.1.8

eqliscsiVolumeStatusConnections

The value of this object represents number of active iscsi
connections to this volume. It MUST match with the number of rows
for this particular iscsiNode in iscsiConnectionAttributesTable.

eqliscsiVolumeStatusLostRaidBlocksAction

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.7.1.9

This field specifies what action administrator wants to take on lost raid blocks.

Enumerationr/w

Enumerated Values:

1	mark-valid
2	zero-out

.1.3.6.1.4.1.12740.5.1.7.7.1.10

eqliscsiVolumeStatusNumReplicas

The value of this object represents the total number of replicas present
for this volume across all replica sites.
The value will match with the sum of values of eqliscsiVolumeReplNumReplicas
that correspond to this vol…

eqliscsiVolumeStatusReplReserveSpace

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.7.1.11

The value of this object represents space reserved for this volume for
replication purposes.

eqliscsiVolumeStatusAllocatedSpace

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.7.1.12

The value of this object represents the actual materialized pages for this volume.

eqliscsiVolumeStatusReplResvInUse

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.7.1.13

This field represents the amount of local replication reserve in use.

eqliscsiVolumeStatusReplTxData

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.7.1.14

This field represents the amount of data that will be transferred during next replication.

eqliscsiVolumeStatusNumOnlineSnaps

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.7.1.15

This field represents the number of online snapshots on this volume.

eqliscsiVolumeStatusPagesSharedWithParent

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.7.1.16

This field represents the number of pages the volume shares with its parent. Is NA for a non-thin clone volume

eqliscsiVolumeStatusExternalConnections

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.7.1.17

The value of this object represents number of active iscsi
connections to this volume, not counting any extended copy
sessions.

eqliscsiVolumeStatusSpaceBorrowing

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.7.1.18

This field specifies how many MB of space that this volume is borrowing.

MBSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.7.1.19

eqliscsiVolumeStatusBorrow

This field specifies operational status of borrowing.

Enumeration

Enumerated Values:

0	unavailable
1	enabled
2	disabled

.1.3.6.1.4.1.12740.5.1.7.7.1.20

eqliscsiSnapshotStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.8 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiSnapshotStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiSnapshotStatusTable'

EqualLogic-Dynamic Storage Snapshot Table.
This table contains a list of volumes in a group and their stats.

eqliscsiSnapshotStatusEntry row .1.3.6.1.4.1.12740.5.1.7.8.1

An entry (row) containing volume stats.

Indexes

No indexes recorded

Column Syntax OID

eqliscsiSnapshotStatusOperStatus

This field specifies the current operational status of the
snapshot.

Enumeration

Enumerated Values:

1	available
2	not-available
3	not-available-due-to-snap-reserve-met
4	not-available-due-to-members-offline
5	not-available-due-to-lost-cached-blocks
6	not-available-due-to-thin-max-growth-met
7	not-available-due-to-nospace-for-auto-grow
8	not-available-due-to-missing-pages

.1.3.6.1.4.1.12740.5.1.7.8.1.1

eqliscsiSnapshotStatusConnections

The value of this object represents number of active iscsi connections
to this snapshot. It MUST match with the number of rows for this
particular iscsiNode in iscsiConnectionAttributesTable.

eqliscsiSnapshotStatusLostRaidBlocksAction

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.8.1.2

This field specifies what action administrator wants to take on lost raid blocks.

Enumerationr/w

Enumerated Values:

1	mark-valid
2	zero-out

.1.3.6.1.4.1.12740.5.1.7.8.1.10

eqliscsiVolumeAuthAttributesTable

table

.1.3.6.1.4.1.12740.5.1.7.12 · 1 row entry · 2 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeAuthAttributesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeAuthAttributesTable'

EqualLogic-Persistent
A list of identities that the PSA uses to  authenticate itself to
initiators

eqliscsiVolumeAuthAttributesEntry row .1.3.6.1.4.1.12740.5.1.7.12.1

An entry (row) containing management information
applicable to a particular target node's authorized
initiator identity.

Indexes

eqliscsiVolumeAuthRowStatus

Column Syntax OID

The status of the row.

eqliscsiVolumeAuthIdentity

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.12.1.1

A pointer to the corresponding IPS-AUTH MIB
ipsAuthCredChapAttributesEntry that contains the
chap credentials which this volume will use to
authenticate itself to initiators requiring
CHAP authentication

SNMPv2-TCRowPointerr/w

Description:

Represents a pointer to a conceptual row. The value is the
name of the instance of the first accessible columnar object
in the conceptual row.

For example, ifIndex.3 would point to the 3rd row in the
ifTable…

.1.3.6.1.4.1.12740.5.1.7.12.1.2

eqliscsiVolumeBindingTable

table

.1.3.6.1.4.1.12740.5.1.7.13 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeBindingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeBindingTable'

EqualLogic-Persistent
A table that specifies the specific members of the group that
a particular volume may occupy

eqliscsiVolumeBindingEntry row .1.3.6.1.4.1.12740.5.1.7.13.1

An entry (row) containing a reference to a specific volume and a
specific member where that volume's pages can exist.If no entry exists
for a particular volume, the member page allocation will be determined
by the syst…

Indexes

No indexes recorded

Column Syntax OID

eqliscsiVolumeBindingRowStatus

The status of the row.

eqliscsiVolumeReplSiteIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.13.1.1

eqliscsiVolumeReplSiteTable

table

.1.3.6.1.4.1.12740.5.1.7.14 · 1 row entry · 24 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeReplSiteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeReplSiteTable'

EqualLogic-Persistent

eqliscsiVolumeReplSiteEntry row .1.3.6.1.4.1.12740.5.1.7.14.1

Indexes

Column Syntax OID

eqliscsiVolumeReplSiteIndex

A unique 32 bit identifier for this row

SiteIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.12740.5.1.7.14.1.1

eqliscsiVolumeReplSiteRowStatus

The status of the row

eqliscsiVolumeReplSiteName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.14.1.2

A concise, human readable string indentifier for the site,
for example: Boston HQ

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.5.1.7.14.1.3

eqliscsiVolumeReplSiteIpAddr

EQL-SECONDARY-KEY
This field is deprecated and will be unsupported in the next release.

eqliscsiVolumeReplSiteControlCredentials

Type Constraints:
range: 4

.1.3.6.1.4.1.12740.5.1.7.14.1.4

A pointer to the corresponding IPS-AUTH MIB
ipsAuthCredChapAttributesEntry that contains the
chap credentials which this PSA will use to
authenticate itself to replica targets for management
requiring operations.

SNMPv2-TCRowPointerr/w

Description:

.1.3.6.1.4.1.12740.5.1.7.14.1.5

eqliscsiVolumeReplControlTargetIscsiName

The iSCSI name of the group-wide target that is
used to encapsulate replication control commands.

OctetStringr/w

Constraints:
range: 0-223

.1.3.6.1.4.1.12740.5.1.7.14.1.6

eqliscsiVolumeReplSiteSNMPContext

The SNMP context that will be used by applications at the
local site to browse MIBs on the remote site.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.12740.5.1.7.14.1.7

eqliscsiVolumeReplSiteContact

This field contains the full name of the replication site administrator.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.12740.5.1.7.14.1.8

eqliscsiVolumeReplSiteEmail

This field specifies the email address of the replication site administrator.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.12740.5.1.7.14.1.9

eqliscsiVolumeReplSitePhone

This field specifies the phone number of the replication site administrator.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.12740.5.1.7.14.1.10

eqliscsiVolumeReplSiteMobile

This field specifies the cell phone number of the replication site administrator.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.12740.5.1.7.14.1.11

eqliscsiVolumeReplSiteDescription

This field contains a detailed description of the site.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.12740.5.1.7.14.1.12

eqliscsiVolumeReplSiteSpaceAllocated

The total amount of pool space reserved for use by
the site. Replication may be set up as needed by the
administrators at the site as long as the total required
reserve does not exceed this value.

eqliscsiVolumeReplSiteSpaceUsed

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.14.1.13

The amount of reserve space already used by replicated volumes
configured by the site administrator. This value may not exceed
the corresponding value for eqliscsiVolumeReplSiteSpaceAllocated

eqliscsiVolumeReplControlChannelStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.14.1.14

The current status of the control channel to replica site.

Enumeration

Enumerated Values:

1	ipaddress-not-configured
2	generic-error
3	control-target-not-configured
4	control-target-not-present-at-replica-site
5	control-credentials-not-configured
6	authentication-failed
7	logged-in
8	logged-out
9	paused

.1.3.6.1.4.1.12740.5.1.7.14.1.15

eqliscsiVolumeReplSiteAdminStatus

When set to pause, all the replications going to this replica site will be
temporarily suspended until set by the user to start.

Enumerationr/w

Enumerated Values:

1	enabled
2	paused

.1.3.6.1.4.1.12740.5.1.7.14.1.16

eqliscsiVolumeReplSiteTotalNumSnapshots

the total number of snapshots in secondary site

eqliscsiVolumeReplSiteSpaceSubscribed

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.14.1.17

The total amount of pool space subscribed for use by
the site. Subscribed space is the advertised space
for thin provisioned volumes. For classic volumes, subscribed
space is the volume size.

eqliscsiVolumeReplSiteInetAddrType

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.14.1.18

The well-known IP address of the group located at the
site. This will be the IP address to which iSCSI
replication traffic will be directed.

eqliscsiVolumeReplSiteInetAddr

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.5.1.7.14.1.19

The well-known IP address of the group located at the
site. This will be the IP address to which iSCSI
replication traffic will be directed.

eqliscsiVolumeReplSiteNASPartnershipId

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.5.1.7.14.1.20

The NAS replication PartnershipId. This partnershipId is Exastore
way to keep track of a NAS partnership. If NAS replication is configured
This will be a non-zero Id. 0 will be used when NAS replication is not
configur…

eqliscsiVolumeReplSiteBlockState

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.14.1.21

The state of this site for block replication.

StatusEnabledDefaultr/w

Type Values:

0	enabled
1	disabled

.1.3.6.1.4.1.12740.5.1.7.14.1.22

eqliscsiVolumeReplSiteNASState

The state of this site for NAS replication.

StatusDisabledDefaultr/w

Type Values:

0	disabled
1	enabled

.1.3.6.1.4.1.12740.5.1.7.14.1.23

eqliscsiVolumeReplSiteType

This field represents the site type. 0 is normal aka regular repl site. 1 is external site that is not an EQL array.

Enumerationr/w

Enumerated Values:

0	normal
1	external

.1.3.6.1.4.1.12740.5.1.7.14.1.24

eqliscsiVolumeReplicationTable

table

.1.3.6.1.4.1.12740.5.1.7.15 · 1 row entry · 26 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeReplicationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeReplicationTable'

EqualLogic-Persistent
TimeoutCreate:60

eqliscsiVolumeReplicationEntry row .1.3.6.1.4.1.12740.5.1.7.15.1

Indexes

eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiVolumeReplSiteIndex

Column Syntax OID

eqliscsiVolumeReplRowStatus

The status of the row

eqliscsiVolumeReplAdminStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.15.1.1

This object is used to request a change
in the current admin status of the replication
process. When read, it represents the current
admin status.
If disabled, the replication can NEVER be restarted again.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	paused

.1.3.6.1.4.1.12740.5.1.7.15.1.2

eqliscsiVolumeReplRemoteIscsiName

This field specifies the iSCSI target name
for the remote volume which serves as a
replica target.

OctetStringr/w

Constraints:
range: 0-223

.1.3.6.1.4.1.12740.5.1.7.15.1.3

eqliscsiVolumeReplRemoteIscsiPort

This field specifies the Internet Portocol port number
for the iSCSI target specified in the corresponding instance of
eqliscsiVolumeReplRemoteIscsiName. The target will be accessed using this port.

eqliscsiVolumeReplRemotePsvId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.15.1.4

EQL-SECONDARY-KEY
A 16 byte, universally unique identifier for
the remote replica volume. The value for this
object is determined by the array
where the replica set is located.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.15.1.5

eqliscsiVolumeReplDiscardPolicy

In the event that the replication process cannot
complete the transfer of the volume to the replica
site, the action taken on the
incomplete replica is one of these:
1) overrun - complete the in progress replica
2) d…

Enumerationr/w

Enumerated Values:

1	overRun
2	discard

.1.3.6.1.4.1.12740.5.1.7.15.1.6

eqliscsiVolumeReplReserve

This value represents the percentage of space reserved for replication at remote site.
The value effectively determines the maximum number of replicas that can be
maintained at the remote site.
The default value is go…

eqliscsiVolumeReplDeletionPolicy

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.15.1.7

The depth of deletion desired when replication at the local
array is disabled for an associated primary volume. The choices are
as follows:
local_only: Only the local references to the remote replica sets
…

Enumerationr/w

Enumerated Values:

1	local-only
2	remote

.1.3.6.1.4.1.12740.5.1.7.15.1.8

eqliscsiVolumeReplNumReplicas

The number of replicas present at the replica site
for this volume.
The value of this object matches with number of rows in eqliscsiRemoteReplicaTable
that correspond to this replication entry.

eqliscsiVolumeReplPrimaryReserve

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.15.1.9

The space reserved on the primary site to keep track of changes occurred between replications.
The value is represented as percentage of actual volume size. It is recommended
to keep this value 100 if fast fail-back is…

Unsigned32r/w

Constraints:
range: 5-200

.1.3.6.1.4.1.12740.5.1.7.15.1.10

eqliscsiVolumeReplPrimaryBorrow

When the space reserved for replication is not sufficient to keep track of volume changes,
space will be borrowed from free space if the value of this object is true.
Space will not be borrowed when the value is false. …

eqliscsiVolumeReplManualReplStatus

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.15.1.11

Enabling manual replication will allow the replica snaps on the primary and secondary groups to be visible
to iscsi clients. When user connects to primary repl snap and finishes the data transfer, user can set it do do…

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	done

.1.3.6.1.4.1.12740.5.1.7.15.1.12

eqliscsiVolumeReplCurLwMark

This field specifies the smallest volume size in MB since the last replication
that this volume has been shrunk down to. This is used to track volumes shrinking
and then growing so that the secondary side knows to re…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.15.1.13

eqliscsiVolumeReplLwMark

This field is eqliscsiVolumeCurLwMark for the current replication started.
This is used to track volumes shrinking and then growing so that the secondary
side knows to release the pages when the volume is replicated.
…

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.15.1.14

eqliscsiVolumeReplSize

This field is eqliscsiVolumeSize for the current replication started.

eqliscsiVolumeReplThinProvision

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.15.1.15

This field is eqliscsiVolumeThinProvision for the current replication started.

eqliscsiVolumeReplMinThinReserve

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.15.1.16

This field is eqliscsiVolumeMinThinReserve for the current replication started.

eqliscsiVolumeReplThinWarnPercentage

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.15.1.17

This field is eqliscsiVolumeThinWarnPercentage for the current replication started.

eqliscsiVolumeReplThinMaxGrowPercentage

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.15.1.18

This field is eqliscsiVolumeThinMaxGrowPercentage for the current replication started.

eqliscsiVolumeReplDynamicThinReserve

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.15.1.19

This field is eqliscsiVolumeDynamicThinReserve for the current replication started.

eqliscsiVolumeReplFailBackMode

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.15.1.20

This field specifies whether fast fail-back is enabled for this replication or not. By default fail-back will operate in regular mode. If user enables fast fail-back mode, primary site needs to keep the last successful …

Enumerationr/w

Enumerated Values:

0	normal
1	fast

.1.3.6.1.4.1.12740.5.1.7.15.1.21

eqliscsiVolumeReplPromoteSeqNum

This field specifies whether this replicaset was demoted to failback replicaset and later promoted. This value will be set to non-zero if during promote we couldn't communicating to the remote site.
The value will be th…

SNMPv2-SMICounter64r/w

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.12740.5.1.7.15.1.22

eqliscsiVolumeReplTemplateReplicated

This field specifies if the Template has been successfully replicated

eqliscsiVolumeReplSyncAdminStatus

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.15.1.23

Enabling sync replication will allow the replica volume to become online at the end of first successful replication.
The changes to volume on primary will be comitted to the replica volume on secondary synchronously.
W…

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.12740.5.1.7.15.1.24

eqliscsiVolumeReplSyncOperStatus

When SyncAdminStatus is enabled the OperStatus indicates the state of sync replication. The replica volume on the secondary is brought
online at the end of the first successful replication. The sync repl will then start…

Enumerationr/w

Enumerated Values:

0	disabled
1	waiting-for-first-sync
2	first-sync-done

.1.3.6.1.4.1.12740.5.1.7.15.1.25

eqliscsiVolumeReplThinClone

This field specifies if the Volume is a Thin Clone Volume.

eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiVolumeReplSiteIndex

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.15.1.26

eqliscsiVolumeReplicationStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.16 · 1 row entry · 7 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeReplicationStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeReplicationStatusTable'

EqualLogic-Dynamic

eqliscsiVolumeReplicationStatusEntry row .1.3.6.1.4.1.12740.5.1.7.16.1

Indexes

Column Syntax OID

eqliscsiVolumeReplOperStatus

The current operational status of the replication
process.

Enumeration

Enumerated Values:

1	disabled
2	inProgress
3	waiting
4	farEndDown
5	authFailure
6	completed
7	paused
8	remoteResizeFailed
9	remotePaused
10	partnerPausedLocal
11	failed
12	remoteReplReserveLow
13	nomoresnapallowed
14	remoteReplReserveInvalid
15	cancelling
16	pendingDataTransfer
17	manualDataTransferInProgress
18	remoteDisallowDowngradesNotSet
19	remotePartnerNeedsUpgrade

.1.3.6.1.4.1.12740.5.1.7.16.1.1

eqliscsiVolumeReplMBRemaining

If a transfer of replica data is in progress, the
count of MB successfully transferred to the
replica site will be here. If no transfer is in
progress, this object will read zero (0).

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.12740.5.1.7.16.1.2

eqliscsiVolumeReplMBCompleted

If a transfer of replica data is in progress, the
count of MB remaining to be transferred to the
replica site will be here. If no transfer is in
progress, this object will read zero (0).

SNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.12740.5.1.7.16.1.3

eqliscsiVolumeReplCurrentSnapshot

The value of this represents the instance of the snapshot in eqliscsiSnapshotTable
that is currently being replicated.
If there is no replication in progress, the value will be set to NULL.

SNMPv2-TCRowPointer

Description:

.1.3.6.1.4.1.12740.5.1.7.16.1.5

eqliscsiVolumeReplCancel

Setting this variable to true will cause cancellation of any replication that is in
progress.

eqliscsiVolumeRemoteReplReserveIncrNeeded

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.16.1.6

In percentage. remote replica reserve needs to be increased by this value for replication to the partner to continue. Valid only in remoteReplReserveLow and remoteReplReserveInvalid states.

eqliscsiVolumeReplFailbackSnap

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.16.1.7

This pointer points to the fast fail-back snap kept in the local replication reserve.

SNMPv2-TCRowPointer

Description:

.1.3.6.1.4.1.12740.5.1.7.16.1.8

eqliscsiRemoteReplicaTable

table

.1.3.6.1.4.1.12740.5.1.7.17 · 1 row entry · 10 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiRemoteReplicaTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiRemoteReplicaTable'

EqualLogic-Persistent

eqliscsiRemoteReplicaEntry row .1.3.6.1.4.1.12740.5.1.7.17.1

Indexes

eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiVolumeReplSiteIndex eqliscsiRemoteVolumeIndex eqliscsiRemoteSnapIndex

Column Syntax OID

eqliscsiRemoteVolumeIndex

This field specifies a unique index for identifing a remote volume.
The index is the same as the value for eqliscsiVolumeIndex on
the remote site.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.17.1.1

eqliscsiRemoteSnapIndex

This field specifies a unique index for identifing a snapshot.
The index is the same as the value for eqliscsiSnapshotIndex on
the remote site.

eqliscsiRemoteReplISCSIName

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.17.1.2

eqliscsiRemoteReplName

This field specifies the friendly name used to identify the replica.
The name is auto-generated. The name is unique between replicas of a single
volume at a particular site.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.12740.5.1.7.17.1.3

The iscsi name of the volume for which this site
is keeping replicas.

OctetString

Constraints:
range: 0-223

.1.3.6.1.4.1.12740.5.1.7.17.1.4

eqliscsiRemoteReplPsvId

EQL-SECONDARY-KEY
A universally unique 16 byte identifier for the remote replica.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.17.1.5

eqliscsiRemoteReplAdminStatus

Manage the replica status. The row will be deleted from this table if value is set to delete. Status will be in-progress if this replica is currently getting replicated to the secondary site.
The replica will be set to …

Enumerationr/w

Enumerated Values:

0	none
1	delete
2	in-progress
3	incomplete

.1.3.6.1.4.1.12740.5.1.7.17.1.6

eqliscsiRemoteReplTimeStamp

This field specifies the creation time of the replica.
Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.

eqliscsiRemoteReplSnapColIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.17.1.7

This field specifies the index of the snap collection at remote site if this
replica is part of a collection. Otherwise value will be zero.

eqliscsiRemoteReplScheduleIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.17.1.8

EQL-SECONDARY-KEY
This field specifies the index of the schedule on the primary site that initiated
create replica operation ie eqliscsiVolumeSnapshotPolicyIndex .
If this replica is not directly created by a schedule,…

eqliscsiRemoteReplLocalMemberId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.17.1.9

This field represents eqliscsiLocalMemberId field of the snapshot index of the replica on secondary site.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.17.1.10

eqliscsiReplicaSetTable

table

.1.3.6.1.4.1.12740.5.1.7.18 · 1 row entry · 19 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiReplicaSetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiReplicaSetTable'

EqualLogic-Persistent

eqliscsiReplicaSetEntry row .1.3.6.1.4.1.12740.5.1.7.18.1

The Replica set consists of the base volume and the snapshots associated with this base volume.

Indexes

eqliscsiReplicaSetPrimaryIscsiName

Column Syntax OID

The iscsi name of the volume for which this site
is keeping replicas.

OctetString

Constraints:
range: 0-223

.1.3.6.1.4.1.12740.5.1.7.18.1.1

eqliscsiReplicaSetReserve

The value of this object specifies how much percentage of space reserved for replication.
This value matches with correspoding eqliscsiVolumeReplReserve value on the primary site.
The value is initialized and maintained…

eqliscsiReplicaSetAdminStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.18.1.2

eqliscsiReplicaSetSite

Represents the value of eqliscsiReplicantSiteIndex that
corresponds to the site to which this replica belongs.

SiteIndexr/w

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.12740.5.1.7.18.1.3

This object is used to request a change
in the current admin status of the replication
process. When read, it represents the current
admin status.

Enumerationr/w

Enumerated Values:

1	stopped
2	started

.1.3.6.1.4.1.12740.5.1.7.18.1.4

eqliscsiReplicaSetPromotePolicy

This object represents the policy that is implemented when
the replica set is promoted to a conventional volume. If the
value of this object is set to 1, the iscsi name of the target
is generated uniquely using conven…

Enumerationr/w

Enumerated Values:

1	default-iscsi-name
2	primary-iscsi-name

.1.3.6.1.4.1.12740.5.1.7.18.1.5

eqliscsiReplicaSetManualReplStatus

This object is used to let the secondary know that the transfer of data
has completed for volumes using manual data transfer for replication.

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled
3	done

.1.3.6.1.4.1.12740.5.1.7.18.1.12

eqliscsiReplicaSetFailBackMode

This field specifies the mode of fail-back. In a normal fail-back mode, to get primary site back in sync with secondary site volume, all the volume contents must be transferred back to primary site. In fast fail-back mo…

Enumeration

Enumerated Values:

0	normal
1	fast

.1.3.6.1.4.1.12740.5.1.7.18.1.13

eqliscsiReplicaSetType

This field specifies whether the replicaset is a regular replicaset or a fail-back replicaset. A regular replicaset is created on secondary site by the system when user enables replication of a volume on the primary sit…

Enumerationr/w

Enumerated Values:

0	regular
1	fail-back

.1.3.6.1.4.1.12740.5.1.7.18.1.14

eqliscsiReplicaSetAccess

By default, replicasets provide no-access to the user ie users cannot access the replicas or replicaset from an initiator. read-only-replicas provide read-only access to the replicas as well as the replicaset. Users mus…

Enumerationr/w

Enumerated Values:

0	no-access
1	read-only

.1.3.6.1.4.1.12740.5.1.7.18.1.15

eqliscsiReplicaSetFailbackReserve

The value local repl reserve before demoting outbound-replicaset to failback-replicaset

eqliscsiReplicaSetLSRPsvId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.18.1.16

If non-zero, the value represents the PsvId of last successful replication snapshot of this replicaset. This value will only be set when promoting a replicaset as failover volume.The value will be reset after failover v…

OctetStringr/w

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.18.1.17

eqliscsiReplicaSetOrigSize

The value of this column represents the size of the recovery volume when it was promoted.

MBSNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.18.1.18

eqliscsiReplicaSetPrimaryMemberId

The value of this column represents the eqliscsiLocalMemberId of the corresponding volume on the primary site.

eqliscsiReplicaSetPrimaryVolumeIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.18.1.19

The value of this column represents the eqliscsiVolumeIndex of the corresponding volume on the primary site.

eqliscsiReplicaSetPrimarySite

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.18.1.20

The value of this column represents the eqliscsiVolumeReplSiteIndex of the corresponding volume on the primary site.

eqliscsiReplicaSetTemplateReplicated

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.18.1.21

This field specifies if the Template set has been successfully replicated

eqliscsiReplicaSetSyncAdminStatus

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.18.1.22

This field is there to let the secondary know when to bring the secondary replica volume online or offline.
The replica volume will be brought online when syncRep is enabled and it will be brought offline when
syncRep i…

Enumerationr/w

Enumerated Values:

0	disabled
1	enabled

.1.3.6.1.4.1.12740.5.1.7.18.1.23

eqliscsiReplicaSetThinClone

This field specifies if the Volume is a Thin Clone Volume.

eqliscsiReplicaSetRemotePsvId

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.18.1.24

A 16 byte, universally unique identifier for the remote
replicated volume. The value for this object is specified
by the array where the volume is located.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.18.1.25

eqliscsiReplicaSetStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.19 · 1 row entry · 2 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiReplicaSetStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiReplicaSetStatusTable'

EqualLogic-Dynamic replica set status Table.
This table contains a list of replicasets with their size, status etc.

eqliscsiReplicaSetStatusEntry row .1.3.6.1.4.1.12740.5.1.7.19.1

a row replicaset status table

Indexes

eqliscsiReplicaSetOperStatus

Column Syntax OID

The current operational status of the replication
process.

Enumeration

Enumerated Values:

1	stopped
2	inProgress
3	waiting
4	farEndDown
5	authFailure

.1.3.6.1.4.1.12740.5.1.7.19.1.1

eqliscsiReplicaSetSize

The size of the replicaset in MegaBytes.This includes the local replication reserve for failback replicasets.

eqliscsiReplicantSiteIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.19.1.2

eqliscsiReplicantSiteTable

table

.1.3.6.1.4.1.12740.5.1.7.20 · 1 row entry · 23 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiReplicantSiteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiReplicantSiteTable'

EqualLogic-Persistent
The replicant site table contains all of the remote 
sites which have been given access to the local storage
pool for the purposes of creating replica sets.

eqliscsiReplicantSiteEntry row .1.3.6.1.4.1.12740.5.1.7.20.1

Indexes

Column Syntax OID

eqliscsiReplicantSiteIndex

A unique 32 bit identifier for this row

SiteIndex

Type Constraints:
range: 1..2147483647

.1.3.6.1.4.1.12740.5.1.7.20.1.1

eqliscsiReplicantSiteRowStatus

The status of the row

eqliscsiReplicantSiteName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.20.1.2

A concise, human readable string indentifier for the site,
for example: Boston HQ

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.5.1.7.20.1.3

eqliscsiReplicantSiteIpAddr

EQL-SECONDARY-KEY
This field is deprecated and will be unsupported in the next release.

eqliscsiReplicantSiteControlCredentials

Type Constraints:
range: 4

.1.3.6.1.4.1.12740.5.1.7.20.1.4

EQL-SECONDARY-KEY
A pointer to the corresponding IPS-AUTH MIB
ipsAuthCredChapAttributesEntry that contains the
chap credentials which this PSA will use to
authenticate itself to primary sites.

SNMPv2-TCRowPointerr/w

Description:

.1.3.6.1.4.1.12740.5.1.7.20.1.5

eqliscsiReplicantControlTargetIscsiName

EQL-SECONDARY-KEY
The iSCSI name of the group-wide target that is
used to encapsulate replication control commands.

OctetStringr/w

Constraints:
range: 0-223

.1.3.6.1.4.1.12740.5.1.7.20.1.6

eqliscsiReplicantSiteSNMPContext

The SNMP context that will be used by applications at the
local site to browse MIBs on the remote site.

SNMPv2-TCDisplayStringr/w

Type Constraints:
range: 0..255

Description:

Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…

.1.3.6.1.4.1.12740.5.1.7.20.1.7

eqliscsiReplicantSiteContact

This field contains the full name of the replication site administrator.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.12740.5.1.7.20.1.8

eqliscsiReplicantSiteEmail

This field specifies the email address of the replication site administrator.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.12740.5.1.7.20.1.9

eqliscsiReplicantSitePhone

This field specifies the phone number of the replication site administrator.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.12740.5.1.7.20.1.10

eqliscsiReplicantSiteMobile

This field specifies the cell phone number of the replication site administrator.

OctetStringr/w

Constraints:
range: 0-32

.1.3.6.1.4.1.12740.5.1.7.20.1.11

eqliscsiReplicantSiteDescription

This field contains a detailed description of the site.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.12740.5.1.7.20.1.12

eqliscsiReplicantSiteSpaceAllocated

The total amount of pool space reserved for use by
the site. Replication may be set up as needed by the
administrators at the site as long as the total required
reserve does not exceed this value.

eqliscsiReplicantSiteSpaceUsed

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.20.1.13

The amount of reserve space already used by replicated volumes
configured by the site administrator. This value may not exceed
the corresponding value for eqliscsiReplicantSiteSpaceAllocated

eqliscsiReplicantSiteControlChannelStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.20.1.14

The current status of the control channel from primary site.

Enumeration

Enumerated Values:

1	control-target-not-configured
2	control-credentials-not-configured
3	authentication-failed
4	logged-in
5	logged-out
6	paused

.1.3.6.1.4.1.12740.5.1.7.20.1.15

eqliscsiReplicantSiteAdminStatus

When set to pause, all the replications coming from this primary site will be
temporarily suspended until set by the user to enabled.
When set to nuke, all replicasets will be deleted.

Enumerationr/w

Enumerated Values:

1	enabled
2	paused
3	nuke

.1.3.6.1.4.1.12740.5.1.7.20.1.16

eqliscsiReplicantSiteTotalNumSnapshots

the total number of snapshots in secondary site.

eqliscsiReplicantSiteStoragePoolIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.20.1.17

This field specifies a unique index for identifying a storage pool.

eqliscsiReplicantSiteSpaceSubscribed

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.20.1.18

The total amount of pool space subscribed for use by
the site. Subscribed space is the advertised space for
thin provisioned volumes and it is the actual volume size
for regular volumes.

eqliscsiReplicantSiteInetAddrType

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.20.1.19

The well-known IP address of the group located at the
site. This will be the IP address to which iSCSI
replication traffic will be directed.

eqliscsiReplicantSiteInetAddr

Type Values:

0	unknown
1	ipv4
2	ipv6
3	ipv4z
4	ipv6z
16	dns
25	l2vpn

.1.3.6.1.4.1.12740.5.1.7.20.1.20

The well-known IP address of the group located at the
site. This will be the IP address to which iSCSI
replication traffic will be directed.

eqliscsiReplicantSiteUnmanagedSpace

Type Constraints:
range: 0..255

.1.3.6.1.4.1.12740.5.1.7.20.1.21

The total amount of pool space not managed by
the site. This includes the space used by the unmanaged
replica sets and recovery volumes.

eqliscsiReplicantSiteReplType

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.20.1.22

This field represents the site type. 0 is normal aka regular repl site. 1 is external site that is not EQL.

Enumerationr/w

Enumerated Values:

0	normal
1	external

.1.3.6.1.4.1.12740.5.1.7.20.1.23

eqliscsiVolCollectionObjectsTable

table

.1.3.6.1.4.1.12740.5.1.7.21 · 1 row entry · 2 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolCollectionObjectsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolCollectionObjectsTable'

EqualLogic-Persistent
This table maintains the list of volume objects in each collection.

eqliscsiVolCollectionObjectsEntry row .1.3.6.1.4.1.12740.5.1.7.21.1

An entry in the table.

Indexes

eqliscsiVolCollectionIndex eqliscsiLocalMemberId eqliscsiVolumeIndex

Column Syntax OID

A unique 32 bit identifier for this row

eqliscsiVolCollectionObjectRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.21.1.1

Row status used to manage this row.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.21.1.2

eqliscsiVolCollectionTable

table

.1.3.6.1.4.1.12740.5.1.7.22 · 1 row entry · 6 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolCollectionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolCollectionTable'

EqualLogic-Persistent
This table maintains the list of volume collections and the supported operations
on the collection.

eqliscsiVolCollectionEntry row .1.3.6.1.4.1.12740.5.1.7.22.1

An entry in the table.

Indexes

eqliscsiVolCollectionRowStatus

Column Syntax OID

Row status used to manage this row.
When deleteing a row from this table all the corresponding rows in snapcollection table
must be reset to zero vol collection index

eqliscsiVolCollectionName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.22.1.1

EQL-SECONDARY-KEY
This field specifies a user friendly name for this collection.
The name must be unique within a group.
The name must not contain spaces or special characters.
The name can be up to 64 characters in len…

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.12740.5.1.7.22.1.2

eqliscsiVolCollectionDescription

This field specifies a descriptive string that provides details about this collection.
The description can be up to 128 characters.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.12740.5.1.7.22.1.3

eqliscsiVolCollectionReplService

This field specifies the replication service on the volume collection.
If this volume collection is created for replication of a volume collection at partner site,
then the value is set to replica-site.
If this volume…

Enumerationr/w

Enumerated Values:

0	none
1	replica-site
2	replicated-primary

.1.3.6.1.4.1.12740.5.1.7.22.1.4

eqliscsiVolCollectionSite

This field specifies the partner to which this collection belongs. The value
will match with eqliscsiVolumeReplSiteIndex if this collection belongs to a partner.
Otherwise the value is set to zero. The value will be no…

eqliscsiVolCollectionFlags

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.12740.5.1.7.22.1.5

This fields defines the common place holder for volume collection operational flags. The flags must be of type
enable(1) or disable(0), and the default will always be disable(0).

Bitsr/w

Enumerated Values:

0	isPoolSyncReplicated
1	flag1
2	flag2
3	flag3
4	flag4
5	flag5
6	flag6
7	flag7
8	flag8
9	flag9
10	flag10
11	flag11
12	flag12
13	flag13
14	flag14
15	flag15
16	flag16
17	flag17
18	flag18
19	flag19
20	flag20
21	flag21
22	flag22
23	flag23
24	flag24
25	flag25
26	flag26
27	flag27
28	flag28
29	flag29
30	flag30
31	flag31

.1.3.6.1.4.1.12740.5.1.7.22.1.6

eqliscsiSnapCollectionObjectsTable

table

.1.3.6.1.4.1.12740.5.1.7.23 · 1 row entry · 2 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiSnapCollectionObjectsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiSnapCollectionObjectsTable'

EqualLogic-Persistent
This table maintains the list of snapshot objects in each collection.

eqliscsiSnapCollectionObjectsEntry row .1.3.6.1.4.1.12740.5.1.7.23.1

An entry in the table.

Indexes

eqliscsiSnapCollectionIndex eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiSnapshotIndex

Column Syntax OID

eqliscsiSnapCollectionIndex

A unique 32 bit identifier for this row

eqliscsiSnapCollectionObjectRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.23.1.1

Row status used to manage this row. Rowstatus is set to notInService by the subsystem
when the actual snapshot represented by this row is deleted. The row from this table
will be automatically deleted when the correspon…

eqliscsiSnapCollectionIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.23.1.2

eqliscsiSnapCollectionTable

table

.1.3.6.1.4.1.12740.5.1.7.24 · 1 row entry · 11 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiSnapCollectionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiSnapCollectionTable'

EqualLogic-Persistent
This table maintains the list of snapshot collections and the supported operations
on the collection.
TimeoutCreate:60 TimeoutDelete:60

eqliscsiSnapCollectionEntry row .1.3.6.1.4.1.12740.5.1.7.24.1

An entry in the table.

Indexes

Column Syntax OID

eqliscsiSnapCollectionRowStatus

Row status used to manage this row.

eqliscsiSnapCollectionName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.24.1.1

EQL-SECONDARY-KEY
This field specifies a user friendly name for this collection.
The name must not contain spaces or special characters.
The name can be up to 64 characters in length. There is no default.

OctetStringr/w

Constraints:
range: 1-128

.1.3.6.1.4.1.12740.5.1.7.24.1.2

eqliscsiSnapCollectionDescription

This field specifies a descriptive string that provides details about this collection.
The description can be up to 128 characters.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.12740.5.1.7.24.1.3

eqliscsiSnapCollectionTimestamp

EQL-SECONDARY-KEY
This field specifies the creation time for snapshot.
Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.

eqliscsiSnapCollectionNoofSnaps

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.24.1.4

No of snapshots in this collection at the time of creation.

eqliscsiSnapCollectionVolIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.24.1.5

EQL-SECONDARY-KEY
The index of the volcollection that created this group.
When the volcollection is deleted, this value will be set to zero.

eqliscsiSnapCollectionVSS

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.24.1.6

If this snap collection is created using vss.

Enumerationr/w

Enumerated Values:

0	regular
1	vss

.1.3.6.1.4.1.12740.5.1.7.24.1.7

eqliscsiSnapCollectionScheduleIndex

eqliscsiSnapCollectionReplicated

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.24.1.8

When a row is created with this object set to a non zero value,
, the snapcollection will be queued to be replicated to the
remote location indicated by the corresponing value
of site index in the site table
…

eqliscsiSnapCollectionType

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.12740.5.1.7.24.1.9

Specifies the type of snapcollection.

Enumeration

Enumerated Values:

0	regular
1	replica-site

.1.3.6.1.4.1.12740.5.1.7.24.1.10

eqliscsiSnapCollectionSite

If non-zero, this value represents the partner who created this snap collection ie eqliscsiReplicantSiteIndex.
This collection belongs to that partner not to our group.

SiteIndexOrZero

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.12740.5.1.7.24.1.11

eqliscsiSnapCollectionPolicyTable

table

.1.3.6.1.4.1.12740.5.1.7.25 · 1 row entry · 19 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiSnapCollectionPolicyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiSnapCollectionPolicyTable'

EqualLogic-Persistent Storage SnapSnot Policy Table.

eqliscsiSnapCollectionPolicyEntry row .1.3.6.1.4.1.12740.5.1.7.25.1

An entry (row) containing snapshot scheduling policy
information.The policy determines when to create
snapshot(s) of a volume collection.

Indexes

eqliscsiVolCollectionIndex eqliscsiSnapCollectionPolicyIndex

Column Syntax OID

eqliscsiSnapCollectionPolicyIndex

This value uniquely identifies the snapshot policies for a volume collection.

eqliscsiSnapCollectionPolicyRowStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.25.1.1

This value is used to manage the conceptual row.

eqliscsiSnapCollectionPolicyName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.25.1.2

This value specifies user friendly name for the policy.
It is unique within the context of a volume collection. Spaces are not allowed.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.5.1.7.25.1.3

eqliscsiSnapCollectionPolicyAccessType

Snapshots created using this policy will have accesstype same as the
value of this object.

Enumerationr/w

Enumerated Values:

1	read-write
2	read-only

.1.3.6.1.4.1.12740.5.1.7.25.1.4

eqliscsiSnapCollectionPolicyStatus

Snapshots created using this policy will have status same as the
value of this object.

Enumerationr/w

Enumerated Values:

1	online
2	offline

.1.3.6.1.4.1.12740.5.1.7.25.1.5

eqliscsiSnapCollectionPolicyMaxKeep

snapshotsInteger32r/w

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.12740.5.1.7.25.1.6

eqliscsiSnapCollectionPolicyType

Enumerationr/w

Enumerated Values:

1	once
2	daily
3	weekly
4	monthly
5	hourly

.1.3.6.1.4.1.12740.5.1.7.25.1.7

eqliscsiSnapCollectionPolicyRepeatFactor

The value of this object along with eqliscsiSnapCollectionPolicyType
determines the effective repetition interval for this policy.
The valid values are

PolicyType RepeatFactor
once …

Integer32r/w

Constraints:
range: 1-2147483647

.1.3.6.1.4.1.12740.5.1.7.25.1.8

eqliscsiSnapCollectionPolicyStartTime

minutesInteger32r/w

Constraints:
range: 0-1439

.1.3.6.1.4.1.12740.5.1.7.25.1.9

eqliscsiSnapCollectionPolicyEndTime

minutesInteger32r/w

Constraints:
range: 0-1439

.1.3.6.1.4.1.12740.5.1.7.25.1.10

eqliscsiSnapCollectionPolicyTimeFrequency

minutesInteger32r/w

Constraints:
range: 0-1439

.1.3.6.1.4.1.12740.5.1.7.25.1.11

eqliscsiSnapCollectionPolicyStartDate

The value of this object determines the date from which the policy
will be active. By default, this is the policy creation date.
The value is expressed as number of days since epoch.

daysInteger32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.12740.5.1.7.25.1.12

eqliscsiSnapCollectionPolicyEndDate

daysInteger32r/w

Constraints:
range: 0-2147483647

.1.3.6.1.4.1.12740.5.1.7.25.1.13

eqliscsiSnapCollectionPolicyWeekMask

eqliscsiSnapCollectionPolicyMonthMask

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.25.1.14

The value of this column is currently not being used.

eqliscsiSnapCollectionPolicyNextCreate

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.25.1.15

EQL-SECONDARY-KEY
The value of this column represents number of seconds since epoch
at which the next snapshot by this policy is going to be created.

eqliscsiSnapCollectionPolicyOccurence

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.25.1.16

eqliscsiSnapCollectionPolicyReplication

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.25.1.17

When a row is created with this object set to a non-zero value, and
a replication relationship has been configured for all volumes in the
volume collection, the snapshots created will be queued to be replicated to the
…

eqliscsiSnapCollectionPolicyAdminStatus

Type Constraints:
range: 0..2147483647

.1.3.6.1.4.1.12740.5.1.7.25.1.18

When disabled, the schedule will stop creating snap collections until reenabled.

Enumerationr/w

Enumerated Values:

0	enable
1	disable

.1.3.6.1.4.1.12740.5.1.7.25.1.19

eqliscsiVolCollectionStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.26 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolCollectionStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolCollectionStatusTable'

EqualLogic-Dynamic
This table maintains the dynamic values related to volume collection like number of snapcollection
in a volume collection.

eqliscsiVolCollectionStatusEntry row .1.3.6.1.4.1.12740.5.1.7.26.1

An entry in the table.

Indexes

eqliscsiVolumeReplSiteIndex eqliscsiRemoteSnapCollectionIndex eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiRemoteVolumeIndex eqliscsiRemoteSnapIndex

Column	Syntax	OID
eqliscsiNoOfSnapCollections This field specifies the total number of snap collections in a volume collection. number of rows in eqliscsiSnapCollectionTable that belong to this volume set.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.26.1.1`

eqliscsiRemoteReplicaCollectionObjectsTable

table

.1.3.6.1.4.1.12740.5.1.7.28 · 1 row entry · 2 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiRemoteReplicaCollectionObjectsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiRemoteReplicaCollectionObjectsTable'

EqualLogic-Persistent

eqliscsiRemoteReplicaCollectionObjectsEntry row .1.3.6.1.4.1.12740.5.1.7.28.1

Indexes

Column Syntax OID

eqliscsiRemoteSnapCollectionIndex

This field specifies a unique index for identifing a snapshot collection on remote site.
The index is the same as the value for eqliscsiSnapCollectionIndex on
the remote site.

eqliscsiRemoteReplCollectionObjRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.28.1.1

Row status used to manage this row. Rowstatus is set to notInService by the subsystem
when the actual replica represented by this row is deleted. The row from this table
will be automatically deleted when
all rows that …

eqliscsiVolumeReplSiteIndex eqliscsiRemoteSnapCollectionIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.28.1.2

eqliscsiRemoteReplicaCollectionTable

table

.1.3.6.1.4.1.12740.5.1.7.29 · 1 row entry · 5 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiRemoteReplicaCollectionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiRemoteReplicaCollectionTable'

EqualLogic-Persistent

eqliscsiRemoteReplicaCollectionEntry row .1.3.6.1.4.1.12740.5.1.7.29.1

Indexes

Column Syntax OID

eqliscsiRemoteReplCollectionName

This field specifies the friendly name used to identify the replica Collection on remote site.
The name is auto-generated. The name is unique between replica collections of a single
volumecollection at a particular site.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.12740.5.1.7.29.1.1

eqliscsiRemoteReplCollectionAdminStatus

Manage the replica status. The row will be deleted from this table if value is set to delete.

Enumerationr/w

Enumerated Values:

0	none
1	delete

.1.3.6.1.4.1.12740.5.1.7.29.1.2

eqliscsiRemoteReplCollectionTimeStamp

This field specifies the creation time of the replica collection.
Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.

eqliscsiRemoteReplCollectionVolIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.29.1.3

EQL-SECONDARY-KEY
This field specifies the index of the vol collection on the primary site used to create
this snap collection
was created on remote site. The value will be zero if the volcollection
doesn't exist any…

eqliscsiRemoteReplCollectionSchedIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.29.1.4

EQL-SECONDARY-KEY
This field specifies the index of the schedule on the primary site that initiated
create replica collection operation. This will be set to zero when schedule is deleted.

eqliscsiVolCollectionIndex eqliscsiVolumeReplSiteIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.29.1.5

eqliscsiVolColReplicationTable

table

.1.3.6.1.4.1.12740.5.1.7.30 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolColReplicationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolColReplicationTable'

EqualLogic-Persistent

eqliscsiVolColReplicationEntry row .1.3.6.1.4.1.12740.5.1.7.30.1

Indexes

Column Syntax OID

eqliscsiVolColReplRowStatus

The status of the row

eqliscsiVolColReplAdminStatus

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.30.1.1

Enumerationr/w

Enumerated Values:

1	enabled
2	disabled

.1.3.6.1.4.1.12740.5.1.7.30.1.2

eqliscsiVolColReplDeletionPolicy

The depth of deletion desired when replication at the local
array is disabled for an associated primary volume collection. The choices are
as follows:
local_only: Only the local references to the remote replica set …

Enumerationr/w

Enumerated Values:

1	local-only
2	remote

.1.3.6.1.4.1.12740.5.1.7.30.1.3

eqliscsiVolColReplRemoteCollectionId

An identifier for the remote replica volume collection. The value is same as eqliscsiVolCollectionIndex
of the collection created at partner site.

EQLGROUP-MIBeqlGroupId EQLSTORAGEPOOL-MIBeqlStoragePoolIndex eqliscsiLocalMemberId eqliscsiVolumeIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.30.1.4

eqliscsiVolColReplStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.31 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolColReplStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolColReplStatusTable'

EqualLogic-Dynamic

eqliscsiVolColReplStatusEntry row .1.3.6.1.4.1.12740.5.1.7.31.1

Statistics related to volume collection replication configuration.

Indexes

No indexes recorded

Column	Syntax	OID
eqliscsiVolColReplStatusNumReplicas The number of replica collections present at the replica site for this volume collection. The value of this object matches with number of rows in eqliscsiRemoteReplicaCollectionTable that correspond to this volume repli…	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.31.1.1`

eqlVolumePoolPlacementTable

table

.1.3.6.1.4.1.12740.5.1.7.32 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlVolumePoolPlacementTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqlVolumePoolPlacementTable'

EqualLogic-Dynamic Volume Storage Pool Placement Table.
This table contains a list of volume placements in a pool.

eqlVolumePoolPlacementEntry row .1.3.6.1.4.1.12740.5.1.7.32.1

An entry (row) containing a placement of a volume in a pool.

Indexes

Column	Syntax	OID
eqlVolumePoolPlacementiscsiVolumePsvId EQL-SECONDARY-KEY This field is for internal use only.	OctetStringr/w Constraints: `range: 16-16`	`.1.3.6.1.4.1.12740.5.1.7.32.1.1`

eqliscsiVolReplStatisticsTable

table

.1.3.6.1.4.1.12740.5.1.7.33 · 1 row entry · 5 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolReplStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolReplStatisticsTable'

EqualLogic-Persistent

eqliscsiVolReplStatisticsEntry row .1.3.6.1.4.1.12740.5.1.7.33.1

Indexes

eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiVolumeReplSiteIndex eqliscsiReplSampleIndex

Column Syntax OID

eqliscsiReplSampleIndex

An integer value to represent the sample.

eqliscsiLocalMemberId eqliscsiTargetIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.33.1.1

eqliscsiReplStartTime

Time at which the replication started represented as number of seconds since epoch.

secondsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.33.1.2

eqliscsiReplEndTime

Time at which the replication finished represented as number of seconds since epoch.

secondsSNMPv2-SMICounter32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.33.1.3

eqliscsiReplTxData

The amount of data transfered from startTime to endTime in MB.

MBSNMPv2-SMICounter64

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.12740.5.1.7.33.1.4

eqliscsiReplTxStatus

Status of data transfer for this replication. If replication is disabled,
the status will be set to incomplete.

Enumeration

Enumerated Values:

0	in-progress
1	success
2	cancelled
3	failed
4	remoteReplicaSetIsFailoverVolume
5	incomplete

.1.3.6.1.4.1.12740.5.1.7.33.1.5

eqliscsiVolumeStatisticsTable

table

.1.3.6.1.4.1.12740.5.1.7.34 · 1 row entry · 16 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeStatisticsTable'

EqualLogic-Dynamic Storage Volume Table.
This table contains a list of volumes in a group and their statistics.

eqliscsiVolumeStatisticsEntry row .1.3.6.1.4.1.12740.5.1.7.34.1

An entry (row) containing volume statistics.

Indexes

No indexes recorded

Column	Syntax	OID
eqliscsiVolumeStatsCmdPdus The count of Command PDUs transferred to this volume.	PDUsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.34.1.1`
eqliscsiVolumeStatsRspPdus The count of Response PDUs transferred to this volume.	PDUsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.34.1.2`
eqliscsiVolumeStatsTxData The count of data octets that were transmitted by the local iSCSI node.	octetsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.34.1.3`
eqliscsiVolumeStatsRxData The count of data octets that were received by the local iSCSI node.	octetsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.34.1.4`
eqliscsiVolumeStatsNoOfSessions No of sessions that were established and closed so far to this volume.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.34.1.5`
eqliscsiVolumeStatsReadLatency The accumulative latency in milli seconds for read operations on this volume.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.34.1.6`
eqliscsiVolumeStatsWriteLatency The accumulative latency in milli seconds for write operations on this volume.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.34.1.7`
eqliscsiVolumeStatsReadOpCount The number of read operations on this volume.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.34.1.8`
eqliscsiVolumeStatsWriteOpCount The number of write operations on this volume.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.34.1.9`
eqliscsiVolumeStatsReadAvgLatency The average latency in milli seconds for read operations on this volume.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.34.1.10`
eqliscsiVolumeStatsWriteAvgLatency The average latency in milli seconds for write operations on this volume.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.34.1.11`
eqliscsiVolumeStatsIscsiReadWriteCmdsReceived The number of iscsi read/write commands received for operations on this volume.	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.34.1.12`
eqliscsiVolumeStatsIscsiReadWriteCmdsCompleted A 32-bit counter that is incremented by the current number of outstanding iSCSI IO operations each time an iSCSI IO is received by the target. The iSCSI IO operations include both reads and writes. This counter when d…	SNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.34.1.13`
eqliscsiVolumeStatsHCIscsiReadWriteCmdsReceived The number of iscsi read/write commands received for operations on this volume. This object is a 64-bit version of eqliscsiVolumeStatsIscsiReadWriteCmdsReceived.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.34.1.14`
eqliscsiVolumeStatsHCIscsiTotalQD A 64-bit counter that is incremented by the current number of outstanding iSCSI IO operations each time an iSCSI IO is received by the target. The iSCSI IO operations include both reads and writes. This counter when d…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.34.1.15`
eqliscsiVolumeStatsMisAlignedIO A 64-bit counter that is incremented by the number of mis-aligned I/O operations performed on a volume TODO - beef this up!!!!!	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.34.1.16`

eqliscsiTargetTable

table

.1.3.6.1.4.1.12740.5.1.7.36 · 1 row entry · 8 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiTargetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiTargetTable'

EqualLogic-Persistent iSCSI Target Table.
This table contains a list of iSCSI targets in a group and their attributes.

eqliscsiTargetEntry row .1.3.6.1.4.1.12740.5.1.7.36.1

An entry (row) containing target info.

Indexes

Column Syntax OID

eqliscsiTargetIndex

This field specifies a unique index for identifing an iSCSI target.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.36.1.1

eqliscsiTargetRowStatus

This field is used indicate the status of this entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.36.1.2

eqliscsiTargetUUID

EQL-SECONDARY-KEY
This field is for internal use only.

OctetStringr/w

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.36.1.3

eqliscsiTargetAlias

This field specifies the iSCSI alias used for the target.

OctetStringr/w

Constraints:
range: 0-64

.1.3.6.1.4.1.12740.5.1.7.36.1.4

eqliscsiTargetIscsiName

EQL-SECONDARY-KEY
This field specifies the iSCSI target name.

OctetStringr/w

Constraints:
range: 0-223

.1.3.6.1.4.1.12740.5.1.7.36.1.5

eqliscsiTargetReserved1

This field is not currently used and is reserved.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.36.1.6

eqliscsiTargetReserved2

This field is not currently used and is reserved.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.36.1.7

eqliscsiTargetReserved3

This field is not currently used and is reserved.

eqliscsiLocalMemberId eqliscsiTargetIndex eqliscsiTargetChapSecretsUsage eqliscsiTargetChapSecretsIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.36.1.8

eqliscsiTargetChapSecretsTable

table

.1.3.6.1.4.1.12740.5.1.7.37 · 1 row entry · 5 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiTargetChapSecretsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiTargetChapSecretsTable'

EqualLogic-Persistent Chap Secrets Table for iSCSI targets

eqliscsiTargetChapSecretsEntry row .1.3.6.1.4.1.12740.5.1.7.37.1

An entry (row) containing a CHAP secret credential.

Indexes

Column Syntax OID

eqliscsiTargetChapSecretsUsage

This field specifies a unique index for identifing a specific Chap credential.

Enumeration

Enumerated Values:

1	inbound-iscsi-chap
2	outbound-iscsi-chap
3	inbound-repl-chap

.1.3.6.1.4.1.12740.5.1.7.37.1.1

eqliscsiTargetChapSecretsIndex

This field specifies a unique index for identifing a specific Chap credential.

eqliscsiTargetChapSecretsRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.37.1.2

This field is used indicate the status of this entry.

eqliscsiTargetChapSecretsUserName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.37.1.3

EQL-SECONDARY-KEY
An octet string containing the user name for this credential.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.12740.5.1.7.37.1.4

eqliscsiTargetChapSecretsPassword

An octet string containing the password for this credential.

OctetStringr/w

Constraints:
range: 0-255

.1.3.6.1.4.1.12740.5.1.7.37.1.5

eqliscsiVolumeSnapshotPolicyStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.38 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeSnapshotPolicyStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeSnapshotPolicyStatusTable'

EqualLogic-Dynamic Storage SnapSnot Policy Table.
Note: eqliscsiSnapCollectionPolicyStatus entries (indexed by collection index and
policy index) are used along with eqliscsiVolumeSnapshotPolicyStatus entries (indexed
by member index, volume index and policy index). When they are used together,
eqliscsiSnapCollectionPolicyStatus indexes have a member index of 0xffffffff

eqliscsiVolumeSnapshotPolicyStatusEntry row .1.3.6.1.4.1.12740.5.1.7.38.1

An entry containing snapshot scheduling policy
information.

Indexes

No indexes recorded

Column Syntax OID

eqliscsiVolumeSnapshotPolicyStatusNextCreate

The value of this column represents number of seconds since epoch
at which the next snapshot by this policy is going to be created.

eqliscsiVolumeSnapshotPolicyStatusOperStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.38.1.1

The value of this column represents the current operational status of this policy.
The policy status is set to expired after end date.

Enumeration

Enumerated Values:

0	enabled
1	disabled
2	expired

.1.3.6.1.4.1.12740.5.1.7.38.1.2

eqliscsiVolumeSnapshotPolicyStatusNoOfSnaps

The value of this column represents the current number of snapshots that exist in the system
created by this schedule.

eqliscsiSnapCollectionPolicyStatusNextCreate

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.38.1.3

eqliscsiSnapCollectionPolicyStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.39 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiSnapCollectionPolicyStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiSnapCollectionPolicyStatusTable'

EqualLogic-Dynamic Storage SnapSnot Collection Policy Table.
Note: eqliscsiSnapCollectionPolicyStatus entries (indexed by collection index and
policy index) are used along with eqliscsiVolumeSnapshotPolicyStatus entries (indexed
by member index, volume index and policy index). When they are used together,
eqliscsiSnapCollectionPolicyStatus indexes have a member index of 0xffffffff

eqliscsiSnapCollectionPolicyStatusEntry row .1.3.6.1.4.1.12740.5.1.7.39.1

An entry containing snapshot scheduling policy
information.

Indexes

No indexes recorded

Column Syntax OID

The value of this column represents number of seconds since epoch
at which the next snapshot by this policy is going to be created.

eqliscsiSnapCollectionPolicyStatusOperStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.39.1.1

The value of this column represents the current operational status of this policy.
The policy status is set to expired after end date.

Enumeration

Enumerated Values:

0	enabled
1	disabled
2	expired

.1.3.6.1.4.1.12740.5.1.7.39.1.2

eqliscsiSnapCollectionPolicyStatusNoOfCollections

The value of this column represents the current number of snapshots that exist in the system
created by this schedule.

eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiVolumeOpsIndex

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.39.1.3

eqliscsiVolumeOpsTable

table

.1.3.6.1.4.1.12740.5.1.7.40 · 1 row entry · 9 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeOpsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeOpsTable'

EqualLogic-Persistent Storage Volume Operations Table.

eqliscsiVolumeOpsEntry row .1.3.6.1.4.1.12740.5.1.7.40.1

An entry (row) containing info for volume operations.

Indexes

Column Syntax OID

eqliscsiVolumeOpsIndex

This field specifies a unique index for identifing a volume.

eqliscsiVolumeOpsRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.40.1.1

This field is used indicate the status of this entry.

eqliscsiVolumeOpsOperation

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.40.1.2

The current operation for this drive group
0 - no operation
1 - move Pool

Enumerationr/w

Enumerated Values:

0	none
1	movePool

.1.3.6.1.4.1.12740.5.1.7.40.1.3

eqliscsiVolumeOpsExec

The action to perform on this operation
0 - no operation
1 - cancel
2 - failed

Enumerationr/w

Enumerated Values:

0	none
1	cancel
2	failed

.1.3.6.1.4.1.12740.5.1.7.40.1.4

eqliscsiVolumeOpsStartTime

This field contains the time of the start of the operation.

SNMPv2-SMICounter32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.40.1.5

eqliscsiVolumeOpsStoragePoolSourceIndex

This field unique identifies the source Storage Pool.
Also the 1st part of Index for row in eqliscsiVolBalCommandTable.

eqliscsiVolumeOpsStoragePoolDestinationIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.40.1.6

This field unique identifies the destination Storage Pool.

eqliscsiVolumeOpsVolBalCommandIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.40.1.7

2nd Part of Index for row in eqliscsiVolBalCommandTable

eqliscsiVolumeOpsVolBalCommandiscsiLocalMemberId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.40.1.8

3rd Part of Index for row in eqliscsiVolBalCommandTable

eqliscsiVolumeStoragePreferenceRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.40.1.9

eqliscsiReplicaSetExtensionTable

table

.1.3.6.1.4.1.12740.5.1.7.41 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiReplicaSetExtensionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiReplicaSetExtensionTable'

EqualLogic-Persistent

eqliscsiReplicaSetExtensionEntry row .1.3.6.1.4.1.12740.5.1.7.41.1

This table maintains the information required by the volume if replicaset gets promoted to a volume.

Indexes

No indexes recorded

Column	Syntax	OID
eqliscsiReplicaSetPrimaryPsvId If non-zero, the value represents the PsvId of primary site volume. The value is used by iscsi during page83 and page80 requests.	OctetStringr/w Constraints: `range: 16-16`	`.1.3.6.1.4.1.12740.5.1.7.41.1.1`

eqliscsiVolumeStoragePreferenceTable

table

.1.3.6.1.4.1.12740.5.1.7.42 · 1 row entry · 5 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeStoragePreferenceTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeStoragePreferenceTable'

EqualLogic-Persistent

eqliscsiVolumeStoragePreferenceEntry row .1.3.6.1.4.1.12740.5.1.7.42.1

This table maintains the information related to storage preference of volumes.

Indexes

No indexes recorded

Column Syntax OID

Rowstatus variable used to manage rows in this table.

eqliscsiVolumeStoragePreferenceRAIDType

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.42.1.1

EQL-SECONDARY-KEY This field specifies the user's request to store this volume on the given RAID type.

Enumerationr/w

Enumerated Values:

0	none
5	raid5
6	raid6
10	raid10
50	raid50
60	raid60
61	raid6-accelerated

.1.3.6.1.4.1.12740.5.1.7.42.1.2

eqliscsiVolumeStoragePreferenceDriveType

EQL-SECONDARY-KEY This field specifies the user's request to store this volume on the given drive type.

Enumerationr/w

Enumerated Values:

0	none
1	sas
2	sata

.1.3.6.1.4.1.12740.5.1.7.42.1.3

eqliscsiVolumeStoragePreferenceDiskSpeed

EQL-SECONDARY-KEY This field specifies the user's request to store this volume on the disks with given speed.

Enumerationr/w

Enumerated Values:

0	none
5400	s5400
7200	s7200
10000	s10000
15000	s15000

.1.3.6.1.4.1.12740.5.1.7.42.1.4

eqliscsiVolumeStoragePreferenceRAIDTypeStatus

EQL-SECONDARY-KEY The value of this object represents current status of raid preference set on this volume.

Enumeration

Enumerated Values:

0	none
1	in-progress
2	honored
3	not-available
4	over-subscribed
5	temporarily-unknown

.1.3.6.1.4.1.12740.5.1.7.42.1.5

eqlAdminAccountVolumeTable

table

.1.3.6.1.4.1.12740.5.1.7.43 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlAdminAccountVolumeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqlAdminAccountVolumeTable'

EqualLogic-Dynamic table indicating the access an administrator
has to a volume.

eqlAdminAccountVolumeEntry row .1.3.6.1.4.1.12740.5.1.7.43.1

An entry (row) containing the access privilege.

Indexes

EQLGROUP-MIBeqlGroupId EQLGROUP-MIBeqlStorageGroupAdminAccountIndex eqliscsiLocalMemberId eqliscsiVolumeIndex

Column Syntax OID

eqlAdminAccountVolumeAccess

The administrative permission to a volume.

Enumeration

Enumerated Values:

1	read-only
2	read-write

.1.3.6.1.4.1.12740.5.1.7.43.1.1

eqlAdminAccountReplicantSiteTable

table

.1.3.6.1.4.1.12740.5.1.7.44 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlAdminAccountReplicantSiteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqlAdminAccountReplicantSiteTable'

EqualLogic-Dynamic table indicating the access an administrator
has to a partner.

eqlAdminAccountReplicantSiteEntry row .1.3.6.1.4.1.12740.5.1.7.44.1

An entry (row) containing the access privilege.

Indexes

EQLGROUP-MIBeqlGroupId EQLGROUP-MIBeqlStorageGroupAdminAccountIndex eqliscsiReplicantSiteIndex

Column Syntax OID

eqlAdminAccountReplicantSiteAccess

The administrative permission to a partner.

Enumeration

Enumerated Values:

1	read-only
2	read-write

.1.3.6.1.4.1.12740.5.1.7.44.1.1

eqlAdminAccountVolCollectionTable

table

.1.3.6.1.4.1.12740.5.1.7.45 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlAdminAccountVolCollectionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqlAdminAccountVolCollectionTable'

EqualLogic-Dynamic table indicating the access an administrator
has to a volume collection.

eqlAdminAccountVolCollectionEntry row .1.3.6.1.4.1.12740.5.1.7.45.1

An entry (row) containing the access privilege.

Indexes

EQLGROUP-MIBeqlGroupId EQLGROUP-MIBeqlStorageGroupAdminAccountIndex eqliscsiVolCollectionIndex

Column Syntax OID

eqlAdminAccountVolCollectionAccess

The administrative permission to a volume collection.

Enumeration

Enumerated Values:

1	read-only
2	read-write

.1.3.6.1.4.1.12740.5.1.7.45.1.1

eqliscsiVolumeOpsStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.46 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeOpsStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeOpsStatusTable'

EqualLogic-Dynamic Storage Volume Operations Status Table.

eqliscsiVolumeOpsStatusEntry row .1.3.6.1.4.1.12740.5.1.7.46.1

An entry (row) containing status for volume operations.

Indexes

No indexes recorded

Column	Syntax	OID
eqliscsiVolumeOpsStatusCompletePct The percentage complete an ongoing move or bind operation is	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.46.1.1`

eqliscsiVolumeDynamicConfigTable

table

.1.3.6.1.4.1.12740.5.1.7.47 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeDynamicConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeDynamicConfigTable'

EqualLogic-Persistent Table for storing in database volume attributes that can frequently change.

eqliscsiVolumeDynamicConfigEntry row .1.3.6.1.4.1.12740.5.1.7.47.1

An entry (row) containing status for volume dynamic config. The values in this table are not user
configurable.

Indexes

No indexes recorded

Column Syntax OID

eqliscsiVolumeDynamicRowStatus

This field is used to create new entries and indicate the status of this entry.

eqliscsiVolumeDynamicThinReserve

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.47.1.1

This field specifies the amount of pool free space that is currently reserved
for this Thin Provisioned Volume. A row will only exist in this table if
thin-provisioning is enabled on the volume. A row will not exist f…

MBSNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.47.1.2

eqliscsiVolumeDynamicInUseHighWaterMark

This field specifies the high water mark of the volume's in-use.

MBSNMPv2-SMIUnsigned32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.47.1.3

eqliscsiVolumeDynamicInUseHighWaterMarkTimestamp

This field specifies the creation time for high water mark
of the volume's in-use. Time is represented as the time in
seconds since 00:00:00 UTC, 1970-01-01.

secondsSNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.47.1.4

eqliscsiVolumeReplSiteStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.48 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeReplSiteStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeReplSiteStatusTable'

EqualLogic-Dynamic

eqliscsiVolumeReplSiteStatusEntry row .1.3.6.1.4.1.12740.5.1.7.48.1

partner related status information

Indexes

No indexes recorded

Column	Syntax	OID
eqliscsiVolumeReplSiteFailbackSpace This value represents the space consumed by of all failback replicasets that belong to this partner.	MBSNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.48.1.1`

eqliscsiVolumeChunkTable

table

.1.3.6.1.4.1.12740.5.1.7.49 · 1 row entry · 5 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeChunkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeChunkTable'

EqualLogic-Dynamic. This table exposes the volume as number of chunks.

eqliscsiVolumeChunkEntry row .1.3.6.1.4.1.12740.5.1.7.49.1

Information related to each chunk.

Indexes

eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiVolumeChunkIndex

Column	Syntax	OID
eqliscsiVolumeChunkIndex This value represents index of the chunk.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.49.1.1`
eqliscsiVolumeChunkVersion This value represents version of the chunk. Different versions of chunks can be of different sizes. Currently chunks with version 1 are supported.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.49.1.2`
eqliscsiVolumeChunkSegmentSize This value represents the size of a segment. In chunk version 1, segment size is 256k bytes of data.	KBSNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.49.1.3`
eqliscsiVolumeChunkSegments This value represents the size of the chunk expressed as number of segments.	segmentsSNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.49.1.4`
eqliscsiVolumeChunkModified This value represents a bit mask of modified segments in the given chunk.	OctetString Constraints: `range: 1024-1024`	`.1.3.6.1.4.1.12740.5.1.7.49.1.5`

eqliscsiReplicantSiteOpsTable

table

.1.3.6.1.4.1.12740.5.1.7.50 · 1 row entry · 9 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiReplicantSiteOpsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiReplicantSiteOpsTable'

EqualLogic-Persistent Replicant Site Operations Table.

eqliscsiReplicantSiteOpsEntry row .1.3.6.1.4.1.12740.5.1.7.50.1

An entry (row) containing info for replicant site operations.

Indexes

EQLGROUP-MIBeqlGroupId eqliscsiReplicantSiteIndex eqliscsiReplicantSiteOpsIndex

Column Syntax OID

eqliscsiReplicantSiteOpsIndex

This field specifies a unique index for identifing a replicant site operation.

eqliscsiReplicantSiteOpsRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.50.1.1

This field is used indicate the status of this entry.

eqliscsiReplicantSiteOpsOperation

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.50.1.2

The current operation for this drive group
0 - no operation
1 - move Pool

Enumerationr/w

Enumerated Values:

0	none
1	movePool

.1.3.6.1.4.1.12740.5.1.7.50.1.3

eqliscsiReplicantSiteOpsExec

The action to perform on this operation
0 - no operation
1 - cancel
2 - failed

Enumerationr/w

Enumerated Values:

0	none
1	cancel
2	failed

.1.3.6.1.4.1.12740.5.1.7.50.1.4

eqliscsiReplicantSiteOpsStartTime

This field contains the time of the start of the operation.

SNMPv2-SMICounter32r/w

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.50.1.5

eqliscsiReplicantSiteOpsStoragePoolSourceIndex

This field unique identifies the source Storage Pool.
Also the 1st part of Index for row in eqliscsiVolBalCommandTable.

eqliscsiReplicantSiteOpsStoragePoolDestinationIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.50.1.6

This field unique identifies the destination Storage Pool.

eqliscsiReplicantSiteOpsVolBalCommandIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.50.1.7

2nd Part of Index for row in eqliscsiVolBalCommandTable

eqliscsiReplicantSiteOpsVolBalCommandiscsiLocalMemberId

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.50.1.8

3rd Part of Index for row in eqliscsiVolBalCommandTable

eqliscsiReplicantSiteStatusAvailable

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.50.1.9

eqliscsiReplicantSiteOpsStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.51 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiReplicantSiteOpsStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiReplicantSiteOpsStatusTable'

EqualLogic-Dynamic Replicant Site Operations Status Table.

eqliscsiReplicantSiteOpsStatusEntry row .1.3.6.1.4.1.12740.5.1.7.51.1

An entry (row) containing status for replicant site operations.

Indexes

No indexes recorded

Column	Syntax	OID
eqliscsiReplicantSiteOpsStatusCompletePct The percentage complete an ongoing move or bind operation is	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.51.1.1`

eqliscsiReplicantSiteStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.52 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiReplicantSiteStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiReplicantSiteStatusTable'

EqualLogic-Dynamic
The replicant site status table contains the status of
all the remote replication sites which have been given 
access to the local storage pool for the purposes of 
creating replica sets.

eqliscsiReplicantSiteStatusEntry row .1.3.6.1.4.1.12740.5.1.7.52.1

Indexes

No indexes recorded

Column Syntax OID

The current availability of the remote site

Enumeration

Enumerated Values:

1	not-available
2	available

.1.3.6.1.4.1.12740.5.1.7.52.1.1

eqliscsiReplicantSiteStatusMajorVersion

This variable specifies the Major part of
the lowest member software version of the
remote replication site group.

eqliscsiReplicantSiteStatusMinorVersion

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.52.1.2

This variable specifies the Minor part of
the lowest member software version of the
remote replication site group.

eqliscsiReplicantSiteStatusMaintVersion

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.52.1.3

This variable specifies the Maintenance
part of the lowest member software version
of the remote replication site group.

eqliscsiLocalMemberId eqliscsiVolumeIndex EQLGROUP-MIBeqlGroupTaskIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.52.1.4

eqliscsiVolumeTaskStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.53 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeTaskStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeTaskStatusTable'

EqualLogic-Dynamic Storage Volume Operations Status Table.

eqliscsiVolumeTaskStatusEntry row .1.3.6.1.4.1.12740.5.1.7.53.1

An entry (row) containing status for volume operations.

Indexes

Column	Syntax	OID
eqliscsiVolumeTaskStatusErrorCode Error if any occurred while executing the task on this volume.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.53.1.1`

eqliscsiVolumeTemplateThinClonesTable

table

.1.3.6.1.4.1.12740.5.1.7.54 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeTemplateThinClonesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeTemplateThinClonesTable'

EqualLogic-Dynamic Storage Template Thin Clone Table

eqliscsiVolumeTemplateThinClonesEntry row .1.3.6.1.4.1.12740.5.1.7.54.1

An entry (row) containing a templates thin clone info. The first 2 indices are the volume index of the
template volume and the second 2 indicies are the volume index of the thin clone.

Indexes

eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiThinCloneLocalMemberId eqliscsiThinCloneVolumeIndex

Column Syntax OID

eqliscsiThinCloneLocalMemberId

This field specifies the first part of a unique index for identifing a the thin clone.

eqliscsiThinCloneVolumeIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.54.1.1

This field specifies the second part of a unique index for identifing a thin clone.

eqliscsiVolumeTemplateThinClonesMember

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.54.1.2

Always true.

eqliscsiLocalMemberId eqliscsiVolumeIndex EQLGROUP-MIBeqlStorageGroupAdminAccountIndex

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.54.1.3

eqliscsiVolumeAdminAccountTable

table

.1.3.6.1.4.1.12740.5.1.7.55 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeAdminAccountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeAdminAccountTable'

EqualLogic-Persistent Admin Account Volume Table.
This table contains a list of privilege matchings of administrative
accounts and the volumes those administrators have access to.

eqliscsiVolumeAdminAccountEntry row .1.3.6.1.4.1.12740.5.1.7.55.1

An entry (row) containing mapping of administrative accounts and their
volume access.

Indexes

Column Syntax OID

eqliscsiVolumeAdminAccountRowStatus

This field is used indicate the status of this entry.

EQLGROUP-MIBeqlGroupId eqliscsiVolumeReplSiteIndex EQLGROUP-MIBeqlStorageGroupAdminAccountIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.55.1.1

eqliscsiTemplateVolumeStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.56 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiTemplateVolumeStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiTemplateVolumeStatusTable'

EqualLogic-Dynamic Storage template Volume status Table.
This table contains a list of template volumes in a group and their stats.

eqliscsiTemplateVolumeStatusEntry row .1.3.6.1.4.1.12740.5.1.7.56.1

An entry (row) containing template volume stats.

Indexes

No indexes recorded

Column	Syntax	OID
eqliscsiTemplateVolumeStatusNumThinClones This field represents the number of thin clones associated with a template volume.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.56.1.1`
eqliscsiTemplateVolumeStatusNumThinCloneReplicators This field represents the number of thin clone replicators associated with a template volume.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.56.1.2`
eqliscsiTemplateVolumeStatusNumThinCloneReplicaSets This field represents the number of thin clone replica sets associated with a template volume.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.56.1.3`

eqliscsiSnapAccumulatedStatisticsTable

table

.1.3.6.1.4.1.12740.5.1.7.57 · 1 row entry · 13 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiSnapAccumulatedStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiSnapAccumulatedStatisticsTable'

EqualLogic-Dynamic
This table contains a list inbound-replica sets and their statistics.

eqliscsiSnapAccumulatedStatisticsEntry row .1.3.6.1.4.1.12740.5.1.7.57.1

An entry (row) containing inbound-replicaset statistics.

Indexes

No indexes recorded

Column	Syntax	OID
eqliscsiSnapAccumulatedStatsCmdPdus The count of Command PDUs transferred to this snapshot.	PDUsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.57.1.1`
eqliscsiSnapAccumulatedStatsRspPdus The count of Response PDUs transferred to this snapshot.	PDUsSNMPv2-SMICounter32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.57.1.2`
eqliscsiSnapAccumulatedStatsTxData The count of data octets that were transmitted by the local iSCSI node.	octetsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.57.1.3`
eqliscsiSnapAccumulatedStatsRxData The count of data octets that were received by the local iSCSI node.	octetsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.57.1.4`
eqliscsiSnapAccumulatedStatsNoOfSessions No of sessions that were established and closed so far to this snapshot.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.57.1.5`
eqliscsiSnapAccumulatedStatsReadLatency The accumulative latency in milli seconds for read operations on this snapshot.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.57.1.6`
eqliscsiSnapAccumulatedStatsWriteLatency The accumulative latency in milli seconds for write operations on this snapshot.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.57.1.7`
eqliscsiSnapAccumulatedStatsReadOpCount The number of read operations on this snapshot.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.57.1.8`
eqliscsiSnapAccumulatedStatsWriteOpCount The number of write operations on this snapshot.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.57.1.9`
eqliscsiSnapAccumulatedStatsReadAvgLatency The average latency in milli seconds for read operations on this snapshot.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.57.1.10`
eqliscsiSnapAccumulatedStatsWriteAvgLatency The average latency in milli seconds for write operations on this snapshot.	SNMPv2-SMIGauge32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.57.1.11`
eqliscsiSnapAccumulatedStatsIscsiReadWriteCmdsReceived The number of iscsi read/write commands received for operations on this volume. This object is a 64-bit version of eqliscsiVolumeStatsIscsiREadWriteCmdsReceived.	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.57.1.12`
eqliscsiSnapAccumulatedStatsIscsiTotalQD A 64-bit counter that is incremented by the current number of outstanding iSCSI IO operations each time an iSCSI IO is received by the target. The iSCSI IO operations include both reads and writes. This counter when d…	SNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.57.1.13`

eqliscsiVolumeReplSiteAdminAccountTable

table

.1.3.6.1.4.1.12740.5.1.7.58 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeReplSiteAdminAccountTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeReplSiteAdminAccountTable'

EqualLogic-Persistent Admin Account Replication Site Table.
This table contains a list of privilege matchings of administrative
accounts and the replication sites those administrators have access to.

eqliscsiVolumeReplSiteAdminAccountEntry row .1.3.6.1.4.1.12740.5.1.7.58.1

An entry (row) containing mapping of administrative accounts and their
replication site access.

Indexes

Column Syntax OID

eqliscsiVolumeReplSiteAdminAccountRowStatus

This field is used indicate the status of this entry.

eqliscsiVolumeReplSiteAdminAccountQuotaType

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.58.1.1

The format of the adminQuota value:
0 - Unlimited quota,
1 - Size in Megabytes.
This field applies only to Volume Administrators.

ReplSiteQuotaTyper/w

Type Values:

0	none
1	size

.1.3.6.1.4.1.12740.5.1.7.58.1.2

eqliscsiVolumeReplSiteAdminAccountQuota

This field specifies the storage space quota (in MB) for a
Volume Administrator in the delegated space at this replication site.
This field applies only to Volume Administrators.

EQLGROUP-MIBeqlGroupId EQLGROUP-MIBeqlLdapLoginAccessType EQLGROUP-MIBeqlLdapLoginAccessName eqliscsiVolumeReplSiteIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.58.1.3

eqlLdapLoginAccessReplSiteTable

table

.1.3.6.1.4.1.12740.5.1.7.59 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlLdapLoginAccessReplSiteTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqlLdapLoginAccessReplSiteTable'

EqualLogic-Persistent Group LDAP login access table. 
For LDAP login access configured with volume-admin privilege stores 
the replication sites, volume-admin has access to.

eqlLdapLoginAccessReplSiteEntry row .1.3.6.1.4.1.12740.5.1.7.59.1

An entry (row) containing the configuration for the LDAP
login access replication quotas.

Indexes

Column Syntax OID

eqlLdapLoginAccessReplSiteQuotaType

The format of the adminQuota value:
0 - Unlimited quota,
1 - Size in Megabytes.
This field applies only to Volume Administrators.

ReplSiteQuotaTyper/w

Type Values:

0	none
1	size

.1.3.6.1.4.1.12740.5.1.7.59.1.1

eqlLdapLoginAccessReplSiteQuota

This field specifies the storage space quota (in MB) for a
Volume Administrator in the storage Repl Site. This field
applies only to Volume Administrators.

eqlLdapLoginAccessReplSiteRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.59.1.2

This field is used indicate the status of this entry.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.59.1.3

eqliscsiVolumeSyncReplExtensionTable

table

.1.3.6.1.4.1.12740.5.1.7.60 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeSyncReplExtensionTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeSyncReplExtensionTable'

EqualLogic-Persistent

eqliscsiVolumeSyncReplExtensionEntry row .1.3.6.1.4.1.12740.5.1.7.60.1

An entry (row) containing volume-specific information
required for configuring synchronous replication

Indexes

eqliscsiVolumeSyncReplExtRowStatus

Column Syntax OID

This field is used to indicate the status of this entry.

eqliscsiVolumeSyncReplExtSyncReplLocalMemberId

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.60.1.1

This field specifies the first part of a unique index for identifing a synchronous replication relationship between volumes.

eqliscsiVolumeSyncReplExtSyncReplIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.60.1.2

This field specifies the second part of a unique index for identifing a synchronous replication relationship between volumes.

eqliscsiVolumeSyncReplExtIntTargetIscsiName

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.60.1.3

This field specifies the iSCSI target name that is internally used for
a syncronous replication volume.

OctetStringr/w

Constraints:
range: 0-223

.1.3.6.1.4.1.12740.5.1.7.60.1.4

eqliscsiVolumeSyncReplTable

table

.1.3.6.1.4.1.12740.5.1.7.61 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeSyncReplTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeSyncReplTable'

EqualLogic-Persistent

eqliscsiVolumeSyncReplEntry row .1.3.6.1.4.1.12740.5.1.7.61.1

An entry (row) containing configuration information for replicating an active
volume to a standby

Indexes

eqliscsiVolumeSyncReplLocalMemberId eqliscsiVolumeSyncReplIndex

Column Syntax OID

eqliscsiVolumeSyncReplRowStatus

This field is used to indicate the status of this entry.

eqliscsiVolumeSyncReplLocalMemberId

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.61.1.1

This field specifies the first part of a unique index for identifing a synchronous replication relationship between volumes.

eqliscsiVolumeSyncReplIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.61.1.2

This field specifies the second part of a unique index for identifing a synchronous replication relationship between volumes.

eqliscsiVolumeSyncReplPaused

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.61.1.3

Indicates whether IO forwarding to the replication standby volume is allowed (false) or halted (true).

eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiVolumeSyncReplPeerLocalMemberId eqliscsiVolumeSyncReplPeerVolIndex

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.61.1.4

eqliscsiVolumeSyncReplPeerTable

table

.1.3.6.1.4.1.12740.5.1.7.62 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeSyncReplPeerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeSyncReplPeerTable'

EqualLogic-Dynamic

eqliscsiVolumeSyncReplPeerEntry row .1.3.6.1.4.1.12740.5.1.7.62.1

An entry (row) containing peer volume information for synchronous volume replication.
The first 2 indexes identify the volume, and the second 2 indexes identify the peer.

Indexes

Column	Syntax	OID
eqliscsiVolumeSyncReplPeerLocalMemberId This field specifies the first part of a unique index for identifing the peer of the synchronous replication volume.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.62.1.1`
eqliscsiVolumeSyncReplPeerVolIndex This field specifies the second part of a unique index for identifing the peer of the synchronous replication volume.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.62.1.2`
eqliscsiVolumeSyncReplPeerPsvId If non-zero, the value represents the PsvId of the peer of the synchronous replication volume.	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.12740.5.1.7.62.1.3`

eqliscsiVolumeSyncReplStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.63 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeSyncReplStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeSyncReplStatusTable'

EqualLogic-Dynamic

eqliscsiVolumeSyncReplStatusEntry row .1.3.6.1.4.1.12740.5.1.7.63.1

Synchronous replication status information

Indexes

eqliscsiVolumeSyncReplStatusSyncStatus

Column Syntax OID

This field specifies whether the volume is in sync

Enumeration

Enumerated Values:

1	in-sync
2	out-of-sync
3	out-of-sync-due-to-paused
4	out-of-sync-due-to-snap-reserve-met
5	out-of-sync-due-to-member-offline
6	out-of-sync-due-to-no-pool-space-for-auto-grow
7	out-of-sync-due-to-alt-pool-lost-blocks

.1.3.6.1.4.1.12740.5.1.7.63.1.1

eqliscsiVolumeSyncReplStatusUnreplicatedChanges

This field specifies whether unreplicated changes exist for this volume.

Enumeration

Enumerated Values:

1	yes
2	no
3	unknown

.1.3.6.1.4.1.12740.5.1.7.63.1.2

eqliscsiVolumeSyncReplStatusTotalTxDataMB

This field represents the amount of total changes since last in sync.

eqliscsiVolumeSyncReplStatusRemainingTxDataMB

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.63.1.3

This field represents the amount of remaining changes which need to be replicated.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.63.1.4

eqliscsiVolumeSyncReplVirtualTable

table

.1.3.6.1.4.1.12740.5.1.7.64 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeSyncReplVirtualTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeSyncReplVirtualTable'

EqualLogic-Dynamic Sync Replication Virtual Volume Table.
This table contains a list of sync replication virtual volumes in a group and their attributes.

eqliscsiVolumeSyncReplVirtualEntry row .1.3.6.1.4.1.12740.5.1.7.64.1

An entry (row) containing sync replication virtual volume info.

Indexes

eqliscsiVolumeSyncReplVirtualAccessType

Column Syntax OID

This field specifies access rights for the volume.
The volume can be either read-write or read-only. The default is read-write.

Enumerationr/w

Enumerated Values:

1	read-write
2	read-only

.1.3.6.1.4.1.12740.5.1.7.64.1.1

eqliscsiVolumeSyncReplVirtualAdminStatus

This field specifies if the volume is set to online or offline by
the administrator. If a volume is offline, it cannot be accessed
by iscsi initiators.

Enumerationr/w

Enumerated Values:

1	online
2	offline
3	online-lost-cached-blocks

.1.3.6.1.4.1.12740.5.1.7.64.1.2

eqliscsiVolumeSyncReplVirtualMultInitiator

Specifies if the access from multiple initiators is
allowed for the volume.

Enumerationr/w

Enumerated Values:

0	allowed
1	not-allowed

.1.3.6.1.4.1.12740.5.1.7.64.1.3

eqliscsiVolumeSyncReplVirtualStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.65 · 1 row entry · 8 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeSyncReplVirtualStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeSyncReplVirtualStatusTable'

EqualLogic-Dynamic Sync Replication Virtual Volume Table.
This table contains a list of sync replication virtual volumes in a group and their stats.

eqliscsiVolumeSyncReplVirtualStatusEntry row .1.3.6.1.4.1.12740.5.1.7.65.1

An entry (row) containing sync replication virtual volume stats.

Indexes

No indexes recorded

Column Syntax OID

eqliscsiVolumeSyncReplVirtualStatusReservedSpace

This field specifies how many MB of space is reserved for
snapshots of this volume.
This is a dynamic value, it is not Administrator setable.

eqliscsiVolumeSyncReplVirtualStatusReservedSpaceAvail

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.65.1.1

This field specifies how many MB of reserved space that is unused
by the snapshots.

eqliscsiVolumeSyncReplVirtualStatusNumSnapshots

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.65.1.2

Indicates the number of snapshots that the system is
maintaining on the specified volume

eqliscsiVolumeSyncReplVirtualStatusOperStatus

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.65.1.3

This field specifies the current operational status of the
volume.

Enumeration

Enumerated Values:

1	available
2	not-available
3	not-available-due-to-snap-reserve-met
4	not-available-due-to-members-offline
5	not-available-due-to-lost-cached-blocks
6	not-available-due-to-thin-max-growth-met
7	not-available-due-to-nospace-for-auto-grow
8	not-available-due-to-missing-pages
9	not-available-due-to-syncrep
10	available-no-new-connections
11	not-available-due-to-internal-error

.1.3.6.1.4.1.12740.5.1.7.65.1.4

eqliscsiVolumeSyncReplVirtualStatusConnections

The value of this object represents number of active iscsi
connections to this volume. It MUST match with the number of rows
for this particular iscsiNode in iscsiConnectionAttributesTable.

eqliscsiVolumeSyncReplVirtualStatusAllocatedSpace

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.65.1.5

The value of this object represents the actual materialized pages for this volume.

eqliscsiVolumeSyncReplVirtualStatusVolReserveSpace

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.65.1.6

The value of this object represents the pages reserved for this volume.

eqliscsiVolumeSyncReplVirtualStatusExtConnections

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.65.1.7

The value of this object represents number of active iscsi
connections to this volume, not counting EQL generated connections.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.65.1.8

eqliscsiVolumeSyncReplVirtualStatisticsTable

table

.1.3.6.1.4.1.12740.5.1.7.66 · 1 row entry · 2 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeSyncReplVirtualStatisticsTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeSyncReplVirtualStatisticsTable'

EqualLogic-Dynamic Sync Replication Virtual Volume Table.
This table contains a list of sync replication virtual volumes in a group and their statistics.

eqliscsiVolumeSyncReplVirtualStatisticsEntry row .1.3.6.1.4.1.12740.5.1.7.66.1

An entry (row) containing sync replication virtual volume statistics.

Indexes

No indexes recorded

Column	Syntax	OID
eqliscsiVolumeSyncReplVirtualStatsTxData The count of data octets that were transmitted by the local iSCSI node.	octetsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.66.1.1`
eqliscsiVolumeSyncReplVirtualStatsRxData The count of data octets that were received by the local iSCSI node.	octetsSNMPv2-SMICounter64 Type Constraints: `range: 0..18446744073709551615`	`.1.3.6.1.4.1.12740.5.1.7.66.1.2`

eqliscsiVsrVirtualSyncReplStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.67 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVsrVirtualSyncReplStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVsrVirtualSyncReplStatusTable'

EqualLogic-Dynamic Sync Replication Virtual Volume Sync Repl Status Table.
This table contains a list of sync replication virtual volumes in a group and their sync replication status.

eqliscsiVsrVirtualSyncReplStatusEntry row .1.3.6.1.4.1.12740.5.1.7.67.1

An entry (row) containing sync replication virtual volume sync replication status.

Indexes

eqliscsiVsrVirtualSyncReplStatusSyncStatus

Column Syntax OID

This field specifies whether the volume is in sync.

Enumeration

Enumerated Values:

1	in-sync
2	out-of-sync
3	out-of-sync-due-to-paused
4	out-of-sync-due-to-snap-reserve-met
5	out-of-sync-due-to-member-offline
6	out-of-sync-due-to-no-pool-space-for-auto-grow
7	out-of-sync-due-to-alt-pool-lost-blocks

.1.3.6.1.4.1.12740.5.1.7.67.1.1

eqliscsiVsrVirtualSyncReplStatusUnreplicatedChanges

This field specifies whether unreplicated changes exist for this volume.

Enumeration

Enumerated Values:

1	yes
2	no
3	unknown

.1.3.6.1.4.1.12740.5.1.7.67.1.2

eqliscsiVsrVirtualSyncReplStatusTotalTxDataMB

This field represents the amount of total changes since last in sync.

eqliscsiVsrVirtualSyncReplStatusRemainingTxDataMB

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.67.1.3

This field represents the amount of remaining changes which need to be replicated.

eqliscsiVolumeLowPsvId0 eqliscsiVolumeLowPsvId1 eqliscsiVolumeLowPsvId2 eqliscsiVolumeLowPsvId3 eqliscsiVolumeHighPsvId0 eqliscsiVolumeHighPsvId1 eqliscsiVolumeHighPsvId2 eqliscsiVolumeHighPsvId3

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.67.1.4

eqliscsiSyncReplAfoStateTable

table

.1.3.6.1.4.1.12740.5.1.7.68 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiSyncReplAfoStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiSyncReplAfoStateTable'

Equalogic-member local AFO state

eqliscsiSyncReplAfoStateEntry row .1.3.6.1.4.1.12740.5.1.7.68.1

An member local entry (row) containing a volume's AFO state for synchronous replication
The first 4 indexes identify the volume with the lowest psvid, and
the second 4 indexes identify the volume with the highest psvid.

Indexes

Column	Syntax	OID
eqliscsiSyncReplAfoSeqNum This field specifies the sequence number for the record	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.68.1.1`
eqliscsiSyncReplAfoState This field specifies the current AFO state	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.68.1.2`
eqliscsiSyncReplAfoGrpLeadUuid This value represents the UUID of the Group lead that wrote this record	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.12740.5.1.7.68.1.3`

eqliscsiVolCollectionSyncReplActivePoolTable

table

.1.3.6.1.4.1.12740.5.1.7.69 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolCollectionSyncReplActivePoolTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolCollectionSyncReplActivePoolTable'

EqualLogic-Persistent
This table maintains the list of pool configuration for each sync-repl collection.

eqliscsiVolCollectionSyncReplActivePoolEntry row .1.3.6.1.4.1.12740.5.1.7.69.1

An entry in the table.

Indexes

eqliscsiVolCollectionSyncReplActivePoolRowStatus

Column Syntax OID

This field is used indicate the status of this entry.

eqliscsiVolCollectionSyncReplActivePoolIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.69.1.1

This field specifies the unique index of the pool serving
as the active pool in a sync-replication collection

eqliscsiVolCollectionSyncReplActivePoolFlags

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.69.1.2

This fields defines the common place holder for sync-replication volume collection. The flags must be of type
enable(1) or disable(0), and the default will always be disable(0).

Bitsr/w

Enumerated Values:

0	syncReplDiscardActiveChanges
1	syncReplForceFailover
2	flag2
3	flag3
4	flag4
5	flag5
6	flag6
7	flag7
8	flag8
9	flag9
10	flag10
11	flag11
12	flag12
13	flag13
14	flag14
15	flag15
16	flag16
17	flag17
18	flag18
19	flag19
20	flag20
21	flag21
22	flag22
23	flag23
24	flag24
25	flag25
26	flag26
27	flag27
28	flag28
29	flag29
30	flag30
31	flag31

.1.3.6.1.4.1.12740.5.1.7.69.1.3

eqliscsiVolCollectionSyncReplStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.70 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolCollectionSyncReplStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolCollectionSyncReplStatusTable'

EqualLogic-Dynamic

eqliscsiVolCollectionSyncReplStatusEntry row .1.3.6.1.4.1.12740.5.1.7.70.1

Synchronous replication status information

Indexes

eqliscsiVolCollectionSyncReplStatusSyncStatus

Column Syntax OID

This field specifies whether the collection is in sync

Enumeration

Enumerated Values:

1	in-sync
2	out-of-sync

.1.3.6.1.4.1.12740.5.1.7.70.1.1

eqliscsiVolCollectionSyncReplStatusUnreplicatedChanges

This field specifies whether unreplicated changes exist for this collection

Enumeration

Enumerated Values:

1	yes
2	no
3	unknown

.1.3.6.1.4.1.12740.5.1.7.70.1.2

eqliscsiVolCollectionSyncReplStatusTotalTxDataMB

This field represents the amount of total changes since last in sync for this collection

eqliscsiVolCollectionSyncReplStatusRemainingTxDataMB

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.70.1.3

This field represents the amount of remaining changes which need to be replicated for this collection

eqliscsiVolumeSyncReplLocalMemberId eqliscsiVolumeSyncReplIndex eqliscsiLocalMemberId eqliscsiVolumeIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.70.1.4

eqliscsiVolumeSyncReplIndexVolumesTable

table

.1.3.6.1.4.1.12740.5.1.7.71 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeSyncReplIndexVolumesTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeSyncReplIndexVolumesTable'

EqualLogic-Dynamic Sync replication index volumes table.  Provides relationships between
sync replication indexes and all the volumes that are associated with that index.

eqliscsiVolumeSyncReplIndexVolumesEntry row .1.3.6.1.4.1.12740.5.1.7.71.1

An entry (row) containing volume information for synchronous replication access/alternate
pairs. The first two parts of the index identify the sync repl index of the pair, and the
second two parts of the index identify…

Indexes

Column	Syntax	OID
eqliscsiVolumeSyncReplIndexVolumesPsvId If non-zero, the value represents the PsvId of the peer of the synchronous replication volume.	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.12740.5.1.7.71.1.1`

eqliscsiVolumeSyncReplSyncActiveOfflineTable

table

.1.3.6.1.4.1.12740.5.1.7.72 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeSyncReplSyncActiveOfflineTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeSyncReplSyncActiveOfflineTable'

EqualLogic-Dynamic

eqliscsiVolumeSyncReplSyncActiveOfflineEntry row .1.3.6.1.4.1.12740.5.1.7.72.1

An entry (row) containing volume-specific information
used to set the identified Synchronous Replication
volume offline.

Indexes

eqliscsiVolumeSyncReplSyncActiveOffline

Column Syntax OID

This field is used to take the SyncActive volume
offline. This field is read-write.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.72.1.1

eqliscsiDeletedVolumeInfoTable

table

.1.3.6.1.4.1.12740.5.1.7.73 · 1 row entry · 7 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiDeletedVolumeInfoTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiDeletedVolumeInfoTable'

EqualLogic-Persistent

eqliscsiDeletedVolumeInfoEntry row .1.3.6.1.4.1.12740.5.1.7.73.1

An entry (row) containing information about a
volume at the time it was deleted, used to restore
a deleted volume to its original state (on un-delete),
or to purge volume permanently to create free space.

Indexes

eqliscsiDeletedVolumeInfoRowStatus

Column Syntax OID

This field is used to indicate the status of this entry.

eqliscsiDeletedVolumeInfoOriginalName

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.73.1.1

This field is the original name of the volume at the time
it was deleted. A unique name is created for a deleted
volume so that it does not collide with visible volumes.
The volume is restored with this original name i…

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.5.1.7.73.1.2

eqliscsiDeletedVolumeInfoOriginalType

This field specifies the volume type at the time it was deleted. Volumes
are converted to thin provisioned when they are deleted in order to consume
as little free space as possible. They are converted back to this t…

Enumeration

Enumerated Values:

1	classic
2	thin-provisioned
3	snapshot

.1.3.6.1.4.1.12740.5.1.7.73.1.3

eqliscsiDeletedVolumeFlags

This bitfield contains volume modifiers or types that a volume originally
had at the time it was deleted. Deleted volumes are converted to thin-provisioned
while recoverable, these fields help to restore a volume to it…

Bits

Enumerated Values:

0	replicaset
1	failback
2	recovery
3	syncrep
4	template
5	thinClone
6	flag6
7	flag7
8	flag8
9	flag9
10	flag10
11	flag11
12	flag12
13	flag13
14	flag14
15	flag15
16	flag16
17	flag17
18	flag18
19	flag19
20	flag20
21	flag21
22	flag22
23	flag23
24	flag24
25	flag25
26	flag26
27	flag27
28	flag28
29	flag29
30	flag30
31	flag31

.1.3.6.1.4.1.12740.5.1.7.73.1.4

eqliscsiDeletedVolumeInfoDeleteDate

This field specifies the deleted time for a volume.
Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.
It is used to determine the oldest deleted volume when it is necessary to
trim back volumes …

eqliscsiDeletedVolumeThinWarnPercentage

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.73.1.5

This field is the original thin warning percentage for the volume at the
time it was deleted.

eqliscsiDeletedVolumeThinMaxGrowPercentage

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.73.1.6

This field is the original thin max grow percentage for the volume at the
time it was deleted.

eqliscsiVolumeSyncReplLocalMemberId eqliscsiVolumeSyncReplIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.73.1.7

eqliscsiVolumeSyncReplActivePeerTable

table

.1.3.6.1.4.1.12740.5.1.7.74 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeSyncReplActivePeerTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeSyncReplActivePeerTable'

EqualLogic-Persistent
This table maintains the volume index of the volume in
the active pool for a sync-repl volume.

eqliscsiVolumeSyncReplActivePeerEntry row .1.3.6.1.4.1.12740.5.1.7.74.1

An entry (row) containing active peer volume information for synchronous volume replication.

Indexes

Column Syntax OID

eqliscsiVolumeSyncReplActivePeerRowStatus

This field is used indicate the status of this entry.

eqliscsiVolumeSyncReplActivePeerLocalMemberId

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.74.1.1

This field specifies the first part of a unique index for identifing the
active peer of the synchronous replication volume.

eqliscsiVolumeSyncReplActivePeerVolIndex

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.74.1.2

This field specifies the second part of a unique index for identifing the
active peer of the synchronous replication volume.

eqliscsiVolumeSyncReplActivePeerFlags

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.74.1.3

This field defines the common place holder for sync-replication volume. The flags must be of type
enable(1) or disable(0), and the default will always be disable(0).

Bitsr/w

Enumerated Values:

0	syncReplDiscardActiveChanges
1	syncReplForceFailover
2	flag2
3	flag3
4	flag4
5	flag5
6	flag6
7	flag7
8	flag8
9	flag9
10	flag10
11	flag11
12	flag12
13	flag13
14	flag14
15	flag15
16	flag16
17	flag17
18	flag18
19	flag19
20	flag20
21	flag21
22	flag22
23	flag23
24	flag24
25	flag25
26	flag26
27	flag27
28	flag28
29	flag29
30	flag30
31	flag31

.1.3.6.1.4.1.12740.5.1.7.74.1.4

eqliscsiVolumeSyncReplActivePeerLookupTable

table

.1.3.6.1.4.1.12740.5.1.7.75 · 1 row entry · 2 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeSyncReplActivePeerLookupTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeSyncReplActivePeerLookupTable'

EqualLogic-Dynamic

eqliscsiVolumeSyncReplActivePeerLookupEntry row .1.3.6.1.4.1.12740.5.1.7.75.1

An entry (row) containing active peer volume information for synchronous volume replication.
The index identifies any peer, and the columns identify the active peer, or 0 if there is none.

Indexes

Column	Syntax	OID
eqliscsiVolumeSyncReplActivePeerLookupLocalMemberId This field specifies the first part of a unique index for identifing the active peer of the synchronous replication volume.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.75.1.1`
eqliscsiVolumeSyncReplActivePeerLookupVolIndex This field specifies the second part of a unique index for identifing the active peer of the synchronous replication volume.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.75.1.2`

eqliscsiVolumeSyncReplFailbackTable

table

.1.3.6.1.4.1.12740.5.1.7.76 · 1 row entry · 2 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeSyncReplFailbackTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeSyncReplFailbackTable'

EqualLogic-Persistent
This table maintains the list of underlying sync-repl volumes and if they can be used as
a sync-repl failback target.

eqliscsiVolumeSyncReplFailbackEntry row .1.3.6.1.4.1.12740.5.1.7.76.1

An entry in the sync-repl failback table.

Indexes

eqliscsiVolumeSyncReplFailbackRowStatus

Column Syntax OID

This field is used indicate the status of this table entry.

eqliscsiVolumeSyncReplAllowFailback

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.76.1.1

This field is used to indicate that this volume can be used as a
failback target.

eqliscsiVolCollectionIndex EQLSTORAGEPOOL-MIBeqlStoragePoolIndex

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.76.1.2

eqliscsiVolCollectionSyncReplSyncActiveOfflineTable

table

.1.3.6.1.4.1.12740.5.1.7.77 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolCollectionSyncReplSyncActiveOfflineTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolCollectionSyncReplSyncActiveOfflineTable'

EqualLogic-Dynamic

eqliscsiVolCollectionSyncReplSyncActiveOfflineEntry row .1.3.6.1.4.1.12740.5.1.7.77.1

An entry (row) containing pool-specific information used
to set the identified Synchronous Replication pool offline.

Indexes

Column Syntax OID

eqliscsiVolCollectionSyncReplSyncActiveOffline

This field is used to take the collection SyncActive pool
offline. This field is read-write.

eqliscsiVolumeLowPsvId0 eqliscsiVolumeLowPsvId1 eqliscsiVolumeLowPsvId2 eqliscsiVolumeLowPsvId3 eqliscsiVolumeHighPsvId0 eqliscsiVolumeHighPsvId1 eqliscsiVolumeHighPsvId2 eqliscsiVolumeHighPsvId3

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.77.1.1

eqliscsiSyncReplStateTable

table

.1.3.6.1.4.1.12740.5.1.7.78 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiSyncReplStateTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiSyncReplStateTable'

Equalogic-member local syncrep state

eqliscsiSyncReplStateEntry row .1.3.6.1.4.1.12740.5.1.7.78.1

An member local entry (row) containing a volume's synchronous replication state
The first 4 indexes identify the volume with the lowest psvid, and
the second 4 indexes identify the volume with the highest psvid.

Indexes

Column	Syntax	OID
eqliscsiSyncReplStateSeqNum This field specifies the sequence number for the record	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.78.1.1`
eqliscsiSyncReplStateState This field specifies the Sync Rep State for the volume	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.78.1.2`
eqliscsiSyncReplStateGrpLeadUuid This value represents the UUID of the Group lead that wrote this record	OctetString Constraints: `range: 16-16`	`.1.3.6.1.4.1.12740.5.1.7.78.1.3`

eqliscsiVsrVirtualSyncReplSyncActiveOfflineTable

table

.1.3.6.1.4.1.12740.5.1.7.79 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVsrVirtualSyncReplSyncActiveOfflineTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVsrVirtualSyncReplSyncActiveOfflineTable'

EqualLogic-Dynamic

eqliscsiVsrVirtualSyncReplSyncActiveOfflineEntry row .1.3.6.1.4.1.12740.5.1.7.79.1

An entry (row) containing volume-specific information
used to set the identified Synchronous Replication
volume offline for a virtual volume.

Indexes

eqliscsiVsrVirtualSyncReplSyncActiveOffline

Column Syntax OID

This field is used to get the SyncActive offline status
for the sync-rep volume pair represented by the virtual
volume. This field is read-only, the value can only be
set via the volume SyncActive offline table.

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.79.1.1

eqliscsiVsrCollectionSyncReplSyncActiveOfflineTable

table

.1.3.6.1.4.1.12740.5.1.7.80 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVsrCollectionSyncReplSyncActiveOfflineTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVsrCollectionSyncReplSyncActiveOfflineTable'

EqualLogic-Dynamic

eqliscsiVsrCollectionSyncReplSyncActiveOfflineEntry row .1.3.6.1.4.1.12740.5.1.7.80.1

An entry (row) containing pool-specific information used
to read the identified Synchronous Replication pool offline.

Indexes

eqliscsiVsrCollectionSyncReplSyncActiveOffline

Column Syntax OID

This field is used to get the SyncActive offline status
for the sync-rep collection represented by the virtual
collection This field is read-only, the value can only be
set via the volume SyncActive offline collection …

eqliscsiVolumeName eqliscsiLocalMemberId eqliscsiVolumeIndex

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.80.1.1

eqliscsiVolNameSecondaryIndexTable

table

.1.3.6.1.4.1.12740.5.1.7.81 · 1 row entry · 1 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolNameSecondaryIndexTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolNameSecondaryIndexTable'

EqualLogic-Dynamic

eqliscsiVolNameSecondaryIndexEntry row .1.3.6.1.4.1.12740.5.1.7.81.1

An entry (row) which uses the eqliscsiVolumeName secondary key
to lookup a eqliscsiVolumeName.

Indexes

Column Syntax OID

eqliscsiVolNameSecondaryIndexRowStatus

This field is value of the RowStatus of the
corresponding eqliscsiVolumeRowStatus volume

eqliscsiLocalMemberId eqliscsiSharedVolumeSetIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.81.1.1

eqliscsiSharedVolumeSetTable

table

.1.3.6.1.4.1.12740.5.1.7.82 · 1 row entry · 7 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiSharedVolumeSetTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiSharedVolumeSetTable'

EqualLogic-Persistent Table Volume set table.
This table stores information about Shared Volume Sets in the PS-Group

eqliscsiSharedVolumeSetEntry row .1.3.6.1.4.1.12740.5.1.7.82.1

An entry (row) containing shared volume set information.

Indexes

Column Syntax OID

eqliscsiSharedVolumeSetIndex

This field specifies a unique index for identifing shared volume set.

eqliscsiSharedVolumeSetRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.82.1.1

This field indicates whether the shared volume set is active or not.

eqliscsiSharedVolumeSetPsvid

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.82.1.2

EQL-SECONDARY-KEY
This field is for internal use only.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.82.1.3

eqliscsiSharedVolumeSetSectorSize

This field specifies, in bytes, the sector size all shared volumes in this shared volume set.

Enumeration

Enumerated Values:

0	sector-size-512-bytes
1	sector-size-4096-bytes

.1.3.6.1.4.1.12740.5.1.7.82.1.4

eqliscsiSharedVolumeSetStorageBucketUUID

EQL-SECONDARY-KEY
A pointer to the parent storage bucket
that contains this shared volume set.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.82.1.5

eqliscsiSharedVolumeSharedVolumeSetBucket

A pointer to the parent storage bucket that contains this
shared volume set.
Note this is a redundant field the
StorageBucketUUID field stores the same information.
But the UUID field will come out as soon we add the…

eqliscsiSharedVolumeSetBucketFullPolicy

Type Constraints:
range: 0..23

.1.3.6.1.4.1.12740.5.1.7.82.1.6

This field specifies how the firmware will handle the bucket full condition.
keep-online-fail-write-to-new-pages: Keep all the shared volumes
in the shared volume set online, but fail all write to unallocated pages.
m…

Enumeration

Enumerated Values:

0	keep-online-fail-write-to-unallocated-pages
1	make-svs-offline

.1.3.6.1.4.1.12740.5.1.7.82.1.7

eqliscsiSharedVolumeTable

table

.1.3.6.1.4.1.12740.5.1.7.83 · 1 row entry · 11 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiSharedVolumeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiSharedVolumeTable'

EqualLogic-Persistent Table for storing shared volume set attributes that can frequently change.

eqliscsiSharedVolumeEntry row .1.3.6.1.4.1.12740.5.1.7.83.1

An entry (row) containing status for shared volume the values
in this table are user configurable.

Indexes

eqliscsiSharedVolumeIndex

Column Syntax OID

This field specifies a unique index for identifying a shared volume.

eqliscsiSharedVolumeRowStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.83.1.1

This field is used indicate the status of this entry.

eqliscsiSharedVolumePsvid

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.83.1.2

EQL-SECONDARY-KEY
This field is a unique universal identifier for this
shared volume. This field is mostly for internal use only.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.83.1.3

eqliscsiSharedVolumeName

EQL-SECONDARY-KEY
This field specifies a user friendly name for the shared volume.
The name must be unique within a group.
The name must not contain spaces or special characters.
The name can be up to 64 characters in l…

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.5.1.7.83.1.4

eqliscsiSharedVolumeSize

This field specifies the volume size in MB. There is no default.
Note: Volume size is round to a multiple of 15MB. All shared volumes
are thin provisioned so this value represents the advertized size
of the volume

MBSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.83.1.5

eqliscsiSharedVolumeCreatedAs

This field specifies if the shared volume is set to online or offline by
the administrator. If a volume is offline, it cannot be accessed
by iscsi initiators.

VirtualVolumeCreatedAs

Type Values:

1	stand-alone
2	snapshot
3	fast-clone

.1.3.6.1.4.1.12740.5.1.7.83.1.6

eqliscsiSharedVolumeIfSnapshotOrFastCloneMyParentVVol

EQL-SECONDARY-KEY
This field is only applicable to shared volumes that are created
as snapshots. If snapshot shared volume, this field identifies
the parent.

eqliscsiSharedVolumeSharedVolumeSet

Type Constraints:
range: 0..23

.1.3.6.1.4.1.12740.5.1.7.83.1.7

A pointer to the corresponding Shared Volume Set that contains this
shared volume.

eqliscsiSharedVolumeDescription

Type Constraints:
range: 0..23

.1.3.6.1.4.1.12740.5.1.7.83.1.8

This field specifies a descriptive string that provides details about the volume.
The description can be up to 128 characters. There is no default value.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.12740.5.1.7.83.1.9

eqliscsiSharedVolumeFlags

This fields defines the common place holder for Volume operational flags.

Bits

Enumerated Values:

isVvol

.1.3.6.1.4.1.12740.5.1.7.83.1.10

eqliscsiSharedVolumeSecondaryLunId

This field specifies the secondary LUN id for the volume
This is an auto-generated field for internal use only.

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.83.1.11

eqlVmwareVirtualVolumeTable

table

.1.3.6.1.4.1.12740.5.1.7.84 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlVmwareVirtualVolumeTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqlVmwareVirtualVolumeTable'

EqualLogic-Persistent Table for storing vmWare specific for virtual volume.
Note all virtual volumes are implemented as shared volumes. This table stores
information that is not used by the PS-Group and is only used by vmware.

eqlVmwareVirtualVolumeEntry row .1.3.6.1.4.1.12740.5.1.7.84.1

An entry (row) containing information used by vmWare for this virtual volume.
Note columns in this table are not used by PS-Group, for the most purpose they
are opaque for the PS-Group. They only persist information re…

Indexes

eqlVmwareVirtualVolumeRowStatus

Column Syntax OID

This field is used indicate the status of this entry.

eqlVmwareVirtualVolumeType

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.84.1.1

This field specifies vmware virtual volume type.

VirtualVolumeTyper/w

Type Values:

0	unknown
1	config-VVol
2	data-VVol
3	swap-VVol

.1.3.6.1.4.1.12740.5.1.7.84.1.2

eqlVmWareVirtualVolumeIfSnapshotCreateDate

This field specifies the time at which this snapshot was created
Time is represented as the time in seconds since 00:00:00 UTC, 1970-01-01.
It is meant to be used by the VASA provider to cleanup all the
in-progress sna…

eqliscsiSharedVolumeStatusAllocatedSpace

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.84.1.3

eqliscsiSharedVolumeStatusTable

table

.1.3.6.1.4.1.12740.5.1.7.85 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiSharedVolumeStatusTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiSharedVolumeStatusTable'

EqualLogic-Dynamic Storage Volume Table.
This table contains a list of volumes in a group and their stats.

eqliscsiSharedVolumeStatusEntry row .1.3.6.1.4.1.12740.5.1.7.85.1

An entry (row) containing volume stats.

Indexes

No indexes recorded

Column Syntax OID

The value of this object represents the actual materialized pages for this volume.

eqliscsiSharedVolumeStatusSharedSpace

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.85.1.1

This field represents the number of pages the volume shares with other shared volumes.

eqliscsiSharedVolumeStatusOperStatus

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.85.1.2

This field specifies the current operational status of the shared volume.

Enumeration

Enumerated Values:

1	available
2	not-available
3	not-available-due-to-members-offline
4	not-available-due-to-lost-cached-blocks
5	not-available-due-to-thin-max-growth-met
7	not-available-due-to-nospace-for-auto-grow
8	not-available-due-to-missing-pages
9	not-available-due-to-internal-error

.1.3.6.1.4.1.12740.5.1.7.85.1.3

eqliscsiDynVVolTable

table

.1.3.6.1.4.1.12740.5.1.7.86 · 1 row entry · 13 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiDynVVolTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiDynVVolTable'

EqualLogic-Dynamic VVol Table.
This table is a Dyn table used by clients only to CREATE or DELETE VVol 
entries. The information contained in this table corresponds to fields present 
in the eqliscsiVolumeTable and the eqlVVolTable. A successful CREATE on this
table will result in CREATION of rows in eqliscsiVolumeTable and eqlVVolTable.
A successful DELETE on this table will result in DELETION of rows in 
eqliscsiVolumeTable and eqlVVolTable.
			 TimeoutCreate:60

eqliscsiDynVVolEntry row .1.3.6.1.4.1.12740.5.1.7.86.1

An entry (row) containing the Dyn VVol Information.

Indexes

Column Syntax OID

eqliscsiDynVVolRowStatus

This field indicates whether the VVol row is ACTIVE or not.

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.86.1.1

eqliscsiDynVVolName

This field specifies a user friendly name for a VVol.
The name must be unique within a group.
The name must not contain spaces or special characters.
The name can be up to 64 characters in length. There is no default.

OctetStringr/w

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.5.1.7.86.1.2

eqliscsiDynVVolSize

This field specifies the VVol size in MB. There is no default.
Note: VVol size is round to a multiple of 15MB.

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.86.1.3

eqliscsiDynVVolContainer

This field contains the index of the container to place this VVol in.

eqliscsiDynVVolIfSnapshotOrFastCloneMyParentVVol

Type Constraints:
range: 0..23

.1.3.6.1.4.1.12740.5.1.7.86.1.4

eqliscsiDynVVolDesc

This field specifies a descriptive string that provides details about the volume.
The description can be up to 128 characters. There is no default value.

OctetStringr/w

Constraints:
range: 0-128

.1.3.6.1.4.1.12740.5.1.7.86.1.5

eqliscsiDynVVolCreatedAs

This field specifies how this virtual volume was created.

VirtualVolumeCreatedAs

Type Values:

1	stand-alone
2	snapshot
3	fast-clone

.1.3.6.1.4.1.12740.5.1.7.86.1.6

Only applicable if vvol was created as a snapshot or a fast-clone.
Gives information about the parent VVol.

eqliscsiDynVVolCreateIsDerived

Type Constraints:
range: 0..23

.1.3.6.1.4.1.12740.5.1.7.86.1.7

eqliscsiDynVVolType

This field stores the type of the VVol.

VirtualVolumeTyper/w

Type Values:

0	unknown
1	config-VVol
2	data-VVol
3	swap-VVol

.1.3.6.1.4.1.12740.5.1.7.86.1.8

Truth value only applicable on VVol create request, used to
indicate if the new VVol to create is a derived VVol.

eqliscsiDynVVolCreateDerivedType

Type Values:

1	true
2	false

Description:

Represents a boolean value.

.1.3.6.1.4.1.12740.5.1.7.86.1.9

Only applicable when creating new vvols and if Dervied is true, indicates
how the new VVol should be derived from the parent VVol

Enumerationr/w

Enumerated Values:

2	snapshot
3	fast-clone
4	clone

.1.3.6.1.4.1.12740.5.1.7.86.1.10

eqliscsiDynVVolCreateDerivedFromParent

Only applicable when creating new vvols and if isDerived is true,
contains the index of the volume to derive from.

eqliscsiDynVVolIfSnapshotMyStatus

Type Constraints:
range: 0..23

.1.3.6.1.4.1.12740.5.1.7.86.1.11

This field specifies the snapshot status if the virtual volume, is a snapshot of another volume.

VirtualVolumeSnapshotStatusr/w

Type Values:

0	unknown
1	in-progress
2	complete

.1.3.6.1.4.1.12740.5.1.7.86.1.12

eqliscsiDynVVolPsvid

This is read-only field, it stores the unique universal identifier for this
Virtual volume.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.86.1.13

eqlDynamicSharedVolumeCopyTable

table

.1.3.6.1.4.1.12740.5.1.7.87 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlDynamicSharedVolumeCopyTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqlDynamicSharedVolumeCopyTable'

EqualLogic-Dynamic shared volume rollback table.
This table is a dynamic table used by clients rollback a shared volume to a snapshot shared volume.

eqlDynamicSharedVolumeCopyEntry row .1.3.6.1.4.1.12740.5.1.7.87.1

An entry (row) containing the dynamic VVol Information.

Indexes

eqlDynamicSharedVolumeCopyRowStatus

Column Syntax OID

This field is used indicate the status of this entry.

eqlDynamicSharedVolumeCopyDestSharedVolume

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.87.1.1

This field identifes the destination of the rollback.

eqlDynamicSharedVolumeCopySourceSharedVolume

Type Constraints:
range: 0..23

.1.3.6.1.4.1.12740.5.1.7.87.1.2

This field identifes the destination of the rollback.

Type Constraints:
range: 0..23

.1.3.6.1.4.1.12740.5.1.7.87.1.3

eqlDynamicSharedVolumeBindUnbindTable

table

.1.3.6.1.4.1.12740.5.1.7.88 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlDynamicSharedVolumeBindUnbindTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqlDynamicSharedVolumeBindUnbindTable'

EqualLogic-Dynamic shared volume bind unbind table
This write-only table is a dynamic table used by clients to bind a shared volume to a host.

eqlDynamicSharedVolumeBindUnbindEntry row .1.3.6.1.4.1.12740.5.1.7.88.1

An entry (row) containing the dynamic VVol Information.

Indexes

eqlDynamicSharedVolumeBindUnbindRowStatus

Column Syntax OID

This field is used indicate the status of this entry.

eqlDynamicSharedVolumeBindUnbindOper

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.88.1.1

This field identifes the bind/unbind operation

Enumerationr/w

Enumerated Values:

1	bind
2	unbind

.1.3.6.1.4.1.12740.5.1.7.88.1.2

eqlDynamicSharedVolumeBindUnbindAccessGroupIndex

This field identifes the host/access group to
bind this shared volume to.

eqlDynamicSharedVolumeBindUnbindOperAugment

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.88.1.3

This field identifes the bind/unbind augemented operation. 0,1 are used to make sure the
ACL fields are updated/created. Option 2 make it so that we DO NOT cleanup ACL's. This would
be used for member down status

Enumerationr/w

Enumerated Values:

0	update
1	updateAccess
2	doNotUpdateAccess

.1.3.6.1.4.1.12740.5.1.7.88.1.4

eqliscsiSharedVolumeMetadataTable

table

.1.3.6.1.4.1.12740.5.1.7.89 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiSharedVolumeMetadataTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiSharedVolumeMetadataTable'

EqualLogic-Persistent Table for storing metadata of shared volumes.

eqliscsiSharedVolumeMetadataEntry row .1.3.6.1.4.1.12740.5.1.7.89.1

Each entry represents a key-value pair combination for a shared volume. Each shared volume
may have several key-value properties in which case a shared volume will be represented
by more than one entry where each entr…

Indexes

eqliscsiLocalMemberId eqliscsiSharedVolumeIndex eqliscsiSharedVolumeMetadataIndex

Column Syntax OID

eqliscsiSharedVolumeMetadataRowStatus

This field is used to indicate the status of the shared volume metadata entry.

eqliscsiSharedVolumeMetadataIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.89.1.1

This field specifies a unique index for identifying the shared volume metadata.

eqliscsiSharedVolumeMetadataKey

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.89.1.2

Key represents the metadata field name.
The maximum supported length of this field
including the NULL character is 65.

OctetStringr/w

Constraints:
range: 1-65

.1.3.6.1.4.1.12740.5.1.7.89.1.3

eqliscsiSharedVolumeMetadataValue

This field represents the value of the metadata field.
The maximum supported length of this field
including the NULL character is 255.

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.12740.5.1.7.89.1.4

eqlPreppedSnapshotVVolTable

table

.1.3.6.1.4.1.12740.5.1.7.90 · 1 row entry · 7 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlPreppedSnapshotVVolTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqlPreppedSnapshotVVolTable'

EqualLogic-Persistent Table for storing virtual volumes that 
represent prepped snapshots.
Note this is a transient state, VMWare creates snapshots in 2 steps 
1) prepareToSnapshotVirtualVolume
2) snapshotVirtualVolume                     
This table stages all the VVOLS all the Virtual volumes that were created 
as a result of the 1st step. Once the 2nd step is executed these 
virtual volumes will transition into being real Shared Volumes on 
the equallogic PS-Group. 
Entries in this table use the same index as the shared volume table, because 
VMware requires that PS-Group generate the volume identifier in step 1 
and it will use this identifier for all forthcoming operations to 
this volume.
Entries in this table will have a corressponding entry in the 
VmwareVirtualTable this table keeps track of the VVOL Type 
(config, data, swap)

eqlPreppedSnapshotVVolEntry row .1.3.6.1.4.1.12740.5.1.7.90.1

An entry (row) containing status for shared volume the values
in this table are user configurable.

Indexes

eqlPreppedSnapshotVVolRowStatus

Column Syntax OID

This field is used indicate the status of this entry.

eqlPreppedSnapshotVVolPsvid

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.90.1.1

This field is a unique universal identifier for this
shared volume. This field is mostly for internal use only.

OctetString

Constraints:
range: 16-16

.1.3.6.1.4.1.12740.5.1.7.90.1.2

eqlPreppedSnapshotVVolName

OctetString

Constraints:
range: 1-64

.1.3.6.1.4.1.12740.5.1.7.90.1.3

eqlPreppedSnapshotVVolSize

MBSNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.90.1.4

eqlPreppedSnapshotVVolMyParentVVol

EQL-SECONDARY-KEY
This field is only applicable to shared volumes that are created
as snapshots. If snapshot shared volume, this field identifies
the parent.

eqlPreppedSnapshotVVolBucket

Type Constraints:
range: 0..23

.1.3.6.1.4.1.12740.5.1.7.90.1.5

This field contains the index of the bucket that contains this prepped snapshot.

eqlPreppedSnapshotVVolDescription

Type Constraints:
range: 0..23

.1.3.6.1.4.1.12740.5.1.7.90.1.6

This field specifies a descriptive string that provides details about the volume.
The description can be up to 128 characters. There is no default value.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.12740.5.1.7.90.1.7

eqlDynamicSharedVolumeDiffTable

table

.1.3.6.1.4.1.12740.5.1.7.91 · 1 row entry · 6 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlDynamicSharedVolumeDiffTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqlDynamicSharedVolumeDiffTable'

EqualLogic-Dynamic shared volume difference table
This write-only table is a dynamic table used by clients to perform a difference 
between 2 volumes

eqlDynamicSharedVolumeDiffEntry row .1.3.6.1.4.1.12740.5.1.7.91.1

An entry (row) containing the dynamic row. The Index will be the VVol

Indexes

eqlDynamicSharedVolumeDiffRowStatus

Column Syntax OID

This field is used indicate the status of this entry.

eqlDynamicSharedVolumeDiffBaseIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.91.1.1

This field specifies the base shared volume index associated with the shared volume.

eqlDynamicSharedVolumeDiffAdmin

Type Constraints:
range: 0..23

.1.3.6.1.4.1.12740.5.1.7.91.1.2

This field identifes the type of diff ooperation

Enumerationr/w

Enumerated Values:

1	unSharedBitMap
2	allocatedBitMap
3	unsharedChunks

.1.3.6.1.4.1.12740.5.1.7.91.1.3

eqlDynamicSharedVolumeDiffStartSegmentOffset

This value represents the starting segment for the diff operation

SNMPv2-SMICounter64r/w

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.12740.5.1.7.91.1.4

eqlDynamicSharedVolumeDiffSegmentsLength

This value represents the segments size being requested.

SNMPv2-SMICounter64r/w

Type Constraints:
range: 0..18446744073709551615

.1.3.6.1.4.1.12740.5.1.7.91.1.5

eqlDynamicSharedVolumeDiffChunkSize

This value represents the size of the Chunk entry for the bit map or other calculation

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.91.1.6

eqliscsiVolumeCompressionConfigurationTable

table

.1.3.6.1.4.1.12740.5.1.7.92 · 1 row entry · 3 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeCompressionConfigurationTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeCompressionConfigurationTable'

EqualLogic-Persistent
This table defines volume specific compression paramters.

eqliscsiVolumeCompressionConfigurationEntry row .1.3.6.1.4.1.12740.5.1.7.92.1

An entry in the volume compression configuration table.

Indexes

eqliscsiVolumeCompressionConfigurationRowStatus

Column Syntax OID

This field is used indicate the status of this table entry.

eqliscsiVolumeCompressionConfigurationPolicy

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.92.1.1

Specify how this volume's snapshots should be compressed.

Enumerationr/w

Enumerated Values:

0	automatic
1	always
2	user-defined
3	never

.1.3.6.1.4.1.12740.5.1.7.92.1.2

eqliscsiVolumeCompressionConfigurationSnapDelay

The value of this object represents how long to wait prior
to marking a snapshot as eligible for compression.
Current default is 24 hours.
Only used when eqliscsiVolumeCompressionConfigurationPolicy
is set to user-def…

minutesSNMPv2-SMIInteger32r/w

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.12740.5.1.7.92.1.3

eqlDynamicSharedVolumeDiffChunkTable

table

.1.3.6.1.4.1.12740.5.1.7.93 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqlDynamicSharedVolumeDiffChunkTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqlDynamicSharedVolumeDiffChunkTable'

EqualLogic-Dynamic. This table exposes the vvol as number of chunks.

eqlDynamicSharedVolumeDiffChunkEntry row .1.3.6.1.4.1.12740.5.1.7.93.1

Information related to each chunk.

Indexes

eqliscsiLocalMemberId eqliscsiSharedVolumeIndex eqlDynamicSharedVolumeDiffChunkIndex

Column	Syntax	OID
eqlDynamicSharedVolumeDiffChunkIndex This value represents index of the chunk.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.93.1.1`
eqlDynamicSharedVolumeDiffChunkSegmentSize This value represents the size of a segment. This is passed in to the row create of the eqlDynamicSharedVolumeDiffChunkTable	KBSNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.93.1.2`
eqlDynamicSharedVolumeDiffNumChunkSegments This value represents the size of the chunk expressed as number of segments.	segmentsSNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.12740.5.1.7.93.1.3`
eqlDynamicSharedVolumeDiffChunkModified This value represents a bit mask of modified segments in the given chunk.	OctetString Constraints: `range: 1024-1024`	`.1.3.6.1.4.1.12740.5.1.7.93.1.4`

eqliscsiVolumeMetadataTable

table

.1.3.6.1.4.1.12740.5.1.7.94 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiVolumeMetadataTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiVolumeMetadataTable'

EqualLogic-Persistent Table for storing metadata of volumes.

eqliscsiVolumeMetadataEntry row .1.3.6.1.4.1.12740.5.1.7.94.1

Each entry represents a key-value pair combination for a volume. Each volume may have
several key-value properties in which case a volume will be represented by more than
one entry where each entry is a specific key-v…

Indexes

eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiVolumeMetadataIndex

Column Syntax OID

eqliscsiVolumeMetadataRowStatus

This field is used to indicate the status of the volume metadata entry.

eqliscsiVolumeMetadataIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.94.1.1

This field specifies a unique index for identifying the volume metadata.

eqliscsiVolumeMetadataKey

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.12740.5.1.7.94.1.2

EQL-SECONDARY-KEY
Key represents the metadata field name.
The maximum supported length of this field
including the NULL character is 65.

OctetStringr/w

Constraints:
range: 1-65

.1.3.6.1.4.1.12740.5.1.7.94.1.3

eqliscsiVolumeMetadataValue

This field represents the value of the metadata field.
The maximum supported length of this field
including the NULL character is 255.

OctetStringr/w

Constraints:
range: 1-255

.1.3.6.1.4.1.12740.5.1.7.94.1.4

eqliscsiSnapshotMetadataTable

table

.1.3.6.1.4.1.12740.5.1.7.95 · 1 row entry · 4 columns

Open in standard view

Uses the equallogic variant from /opt/observium/mibs/equallogic.

Command help

Walk eqliscsiSnapshotMetadataTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'EQLVOLUME-MIB' -M '/opt/observium/mibs/equallogic:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'EQLVOLUME-MIB::eqliscsiSnapshotMetadataTable'

EqualLogic-Persistent Table for storing metadata of snapshots.

eqliscsiSnapshotMetadataEntry row .1.3.6.1.4.1.12740.5.1.7.95.1

Each entry represents a key-value pair combination for a snapshot. Each snapshot may have
several key-value properties in which case a snapshot will be represented by more than one
entry where each entry is a specific…

Indexes

eqliscsiLocalMemberId eqliscsiVolumeIndex eqliscsiSnapshotIndex eqliscsiSnapshotMetadataIndex

Column Syntax OID

eqliscsiSnapshotMetadataRowStatus

This field is used to indicate the status of the snapshot metadata entry.

eqliscsiSnapshotMetadataIndex

Type Values:

1	active
2	notInService
3	notReady
4	createAndGo
5	createAndWait
6	destroy

Description:

.1.3.6.1.4.1.12740.5.1.7.95.1.1

This field specifies a unique index for identifying the snapshot metadata.