eqliscsiVolumeReplDeletionPolicy
EQLVOLUME-MIB ·
.1.3.6.1.4.1.12740.5.1.7.15.1.8
Object
column
r/w
Enumeration
The depth of deletion desired when replication at the local
array is disabled for an associated primary volume. The choices are
as follows:
local_only: Only the local references to the remote replica sets
will be removed. The remote replica sets will remain
intact and will need to be managed at the remote site.
remote: The remote replica sets will be deleted. This will destroy
all of the remote data.
Note that setting the value to 'remote' will cause the delete operation
to fail if there is no connectivity to the remote site. If the deletion needs to
proceed regardless of the state of the remote site, the local_only policy shoud be
used
Context
- MIB
- EQLVOLUME-MIB
- OID
.1.3.6.1.4.1.12740.5.1.7.15.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- eqliscsiVolumeReplicationEntry
- Table
- eqliscsiVolumeReplicationTable
- Siblings
- 25
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | local-only |
2 | remote |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqliscsiVolumeReplRowStatus The status of the row | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.12740.5.1.7.15.1.1 |
| eqliscsiVolumeReplPrimaryReserve The space reserved on the primary site to keep track of changes occurred between replications.
The value is represented as percentage of actual volume size. It is recommended
to … | column | Unsigned32 | .1.3.6.1.4.1.12740.5.1.7.15.1.10 |
| eqliscsiVolumeReplPrimaryBorrow When the space reserved for replication is not sufficient to keep track of volume changes,
space will be borrowed from free space if the value of this object is true.
Space will n… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.5.1.7.15.1.11 |
| eqliscsiVolumeReplManualReplStatus Enabling manual replication will allow the replica snaps on the primary and secondary groups to be visible
to iscsi clients. When user connects to primary repl snap and finishes … | column | Enumeration | .1.3.6.1.4.1.12740.5.1.7.15.1.12 |
| eqliscsiVolumeReplCurLwMark This field specifies the smallest volume size in MB since the last replication
that this volume has been shrunk down to. This is used to track volumes shrinking
and then growin… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.5.1.7.15.1.13 |
| eqliscsiVolumeReplLwMark This field is eqliscsiVolumeCurLwMark for the current replication started.
This is used to track volumes shrinking and then growing so that the secondary
side knows to release t… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.5.1.7.15.1.14 |
| eqliscsiVolumeReplSize This field is eqliscsiVolumeSize for the current replication started. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.5.1.7.15.1.15 |
| eqliscsiVolumeReplThinProvision This field is eqliscsiVolumeThinProvision for the current replication started. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.5.1.7.15.1.16 |
| eqliscsiVolumeReplMinThinReserve This field is eqliscsiVolumeMinThinReserve for the current replication started. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.15.1.17 |
| eqliscsiVolumeReplThinWarnPercentage This field is eqliscsiVolumeThinWarnPercentage for the current replication started. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.15.1.18 |
| eqliscsiVolumeReplThinMaxGrowPercentage This field is eqliscsiVolumeThinMaxGrowPercentage for the current replication started. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.15.1.19 |
| eqliscsiVolumeReplAdminStatus This object is used to request a change
in the current admin status of the replication
process. When read, it represents the current
admin status.
If disabled, the replication c… | column | Enumeration | .1.3.6.1.4.1.12740.5.1.7.15.1.2 |
| eqliscsiVolumeReplDynamicThinReserve This field is eqliscsiVolumeDynamicThinReserve for the current replication started. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.15.1.20 |
| eqliscsiVolumeReplFailBackMode This field specifies whether fast fail-back is enabled for this replication or not. By default fail-back will operate in regular mode. If user enables fast fail-back mode, primary… | column | Enumeration | .1.3.6.1.4.1.12740.5.1.7.15.1.21 |
| eqliscsiVolumeReplPromoteSeqNum This field specifies whether this replicaset was demoted to failback replicaset and later promoted. This value will be set to non-zero if during promote we couldn't communicating … | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.5.1.7.15.1.22 |
| eqliscsiVolumeReplTemplateReplicated This field specifies if the Template has been successfully replicated | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.5.1.7.15.1.23 |
| eqliscsiVolumeReplSyncAdminStatus Enabling sync replication will allow the replica volume to become online at the end of first successful replication.
The changes to volume on primary will be comitted to the repl… | column | Enumeration | .1.3.6.1.4.1.12740.5.1.7.15.1.24 |
| eqliscsiVolumeReplSyncOperStatus When SyncAdminStatus is enabled the OperStatus indicates the state of sync replication. The replica volume on the secondary is brought
online at the end of the first successful re… | column | Enumeration | .1.3.6.1.4.1.12740.5.1.7.15.1.25 |
| eqliscsiVolumeReplThinClone This field specifies if the Volume is a Thin Clone Volume. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.5.1.7.15.1.26 |
| eqliscsiVolumeReplRemoteIscsiName This field specifies the iSCSI target name
for the remote volume which serves as a
replica target. | column | OctetString | .1.3.6.1.4.1.12740.5.1.7.15.1.3 |
| eqliscsiVolumeReplRemoteIscsiPort This field specifies the Internet Portocol port number
for the iSCSI target specified in the corresponding instance of
eqliscsiVolumeReplRemoteIscsiName. The target will be acce… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.15.1.4 |
| eqliscsiVolumeReplRemotePsvId EQL-SECONDARY-KEY
A 16 byte, universally unique identifier for
the remote replica volume. The value for this
object is determined by the array
where the replica set is located. | column | OctetString | .1.3.6.1.4.1.12740.5.1.7.15.1.5 |
| eqliscsiVolumeReplDiscardPolicy In the event that the replication process cannot
complete the transfer of the volume to the replica
site, the action taken on the
incomplete replica is one of these:
1) overrun… | column | Enumeration | .1.3.6.1.4.1.12740.5.1.7.15.1.6 |
| eqliscsiVolumeReplReserve This value represents the percentage of space reserved for replication at remote site.
The value effectively determines the maximum number of replicas that can be
maintained at t… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.15.1.7 |
| eqliscsiVolumeReplNumReplicas The number of replicas present at the replica site
for this volume.
The value of this object matches with number of rows in eqliscsiRemoteReplicaTable
that correspond to this repl… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.15.1.9 |