eqliscsiVolumeSCSIQErr
EQLVOLUME-MIB ·
.1.3.6.1.4.1.12740.5.1.7.1.1.40
Object
column
r/w
Enumeration
This description is from T10/1799D sbc-3 rev 19. The following quote is from section 7.4.6 Control mode page.
The queue error management (QERR) field specifies how the device server shall handle other tasks
when one task is terminated with CHECK CONDITION status (see SAM-3). The task set type (see the TST field
definition in this subclause) defines which other tasks are affected. If the TST field equals 000b, then all tasks from
all I_T nexuses are affected. If the TST field equals 001b, then only tasks from the same I_T nexus as the task that
is terminated with CHECK CONDITION status are affected.
Note that the volume's QErr mask is kept in the lower 4 bits and all snapshots QErr mask is kept in the next 4 bits
Context
- MIB
- EQLVOLUME-MIB
- OID
.1.3.6.1.4.1.12740.5.1.7.1.1.40- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- eqliscsiVolumeEntry
- Table
- eqliscsiVolumeTable
- Siblings
- 41
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | none |
1 | zeroZero |
2 | zeroOne |
3 | oneZero |
4 | oneOne |
5 | allCommandsAborted |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| eqliscsiVolumeIndex This field specifies a unique index for identifing a volume. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.1.1.1 |
| eqliscsiVolumeReservedPercentage This field specifies what percentage of the volumesize will be reserved for SnapShots.
This space is reserved in addition to the space reserved for the volume.
The default is 100 … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.5.1.7.1.1.10 |
| eqliscsiVolumeSnapWarningLevel This field specifies when to warn the Administrator that the space reserved for SnapShots.
The warning is sent when the SnapShot Space available drops below the specified percenta… | column | Integer32 | .1.3.6.1.4.1.12740.5.1.7.1.1.11 |
| eqliscsiVolumeSnapDeletionPolicy This field specifies what should happen when the space reserved for SnapShots is exhuasted.
The default is delete-oldest SnapShots. | column | Enumeration | .1.3.6.1.4.1.12740.5.1.7.1.1.12 |
| eqliscsiVolumeAutoloadBalancing This field specifies whether or not the volume should be load balanced across multiple
arrays. The default is load balancing is enabled. | column | Enumeration | .1.3.6.1.4.1.12740.5.1.7.1.1.13 |
| eqliscsiVolumeTargetAlias This field specifies the iSCSI alias used for the volume.
This field defaults to the volume name. | column | OctetString | .1.3.6.1.4.1.12740.5.1.7.1.1.14 |
| eqliscsiVolumeTargetIscsiName EQL-SECONDARY-KEY
This field specifies the iSCSI target name for the volume.
This name is auto-generated, though users can override the name. | column | OctetString | .1.3.6.1.4.1.12740.5.1.7.1.1.15 |
| eqliscsiVolumeNodeIndex EQL-SECONDARY-KEY
The arbitrary integer used to uniquely identify this particular
node within the ISCSI mibs. Instances of objects in those MIBS that
are related to this iSCSI tar… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.1.1.16 |
| eqliscsiVolumeHdrDigests An object used by the manager to enable the use of iSCSI header
digests for this volume. When set to 'true' the iSCSI implementation will
negotiate the use of header digests wit… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.5.1.7.1.1.17 |
| eqliscsiVolumeDataDigests An object used by the manager to enable the use of iSCSI data
digests for this volume.When set to 'true' the iSCSI implementation will
negotiate the use of data digests with init… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.5.1.7.1.1.18 |
| eqliscsiVolumeCloneSrcPsvId If non-empty, then this volume is a clone of another volume and is waiting
for the data to be copied to it. This field is the PsvId of the source
volume. If value of this field is… | column | OctetString | .1.3.6.1.4.1.12740.5.1.7.1.1.19 |
| eqliscsiVolumeRowStatus This field is used indicate the status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.12740.5.1.7.1.1.2 |
| eqliscsiVolumeReplService Specifies the type of replication services that are provisioned
on the related volume. A volume may either be a replica, a primary
copy, a replication control target, or nothing … | column | Enumeration | .1.3.6.1.4.1.12740.5.1.7.1.1.20 |
| eqliscsiVolumeMultInitiator Specifies if the access from multiple initiators is
allowed for the volume. | column | Enumeration | .1.3.6.1.4.1.12740.5.1.7.1.1.21 |
| eqliscsiVolumeStoragePoolIndex This field specifies a unique index for identifying a storage pool. Thin clones get their pool index from the parent template. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.1.1.22 |
| eqliscsiVolumeStoragePoolSourceIndex This field specifies the source storage pool for the volume.
If non-zero, the volume is currently being moved from the
indicated source pool to the target pool (eqliscsiVolumeStor… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.1.1.23 |
| eqliscsiVolumeTargetLocalMemberId This field specifies the first part of a unique index for identifing an iSCSI target. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.1.1.24 |
| eqliscsiVolumeTargetIndex This field specifies the second part of a unique index for identifing an iSCSI target. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.1.1.25 |
| eqliscsiVolumeThinProvision This field specifies if the Volume is enabled for Thin Provisioning. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.5.1.7.1.1.26 |
| eqliscsiVolumeMinThinReserve This field specifies the amount of pool free space that is currently reserved
for this Thin Provisioned Volume configured as percentage of eqliscsiVolumeSize. | column | Unsigned32 | .1.3.6.1.4.1.12740.5.1.7.1.1.27 |
| eqliscsiVolumeThinWarnPercentage This field specifies the percentage of Advertised Size for which we send a WARNING
Message when the Allocated Volume Size reaches it. Default value is eqlGroupDefaultThinWarn. | column | Unsigned32 | .1.3.6.1.4.1.12740.5.1.7.1.1.28 |
| eqliscsiVolumeThinMaxGrowPercentage This field specifies the percentage of Advertised Volume Size for which we
take the volume offline when the Allocated Volume Size reaches it.
Default value is eqlGroupDefaultThin… | column | Unsigned32 | .1.3.6.1.4.1.12740.5.1.7.1.1.29 |
| eqliscsiVolumePsvId EQL-SECONDARY-KEY
This field is for internal use only. | column | OctetString | .1.3.6.1.4.1.12740.5.1.7.1.1.3 |
| eqliscsiVolumeShrinkAutoAdjust This field specifies whether snap-reserve should be adjusted automatically when shrinking or growing a volume.
Default value is true.
Example 1: If volume size is 1500MB, snap-re… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.5.1.7.1.1.30 |
| eqliscsiVolumeReplRollbackSeqNum This field specifies the seq number of snap from which this volume was rolled back as part of demote or as part of replicaset rollback. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.12740.5.1.7.1.1.31 |
| eqliscsiVolumeThinWarnMode Specifies if the way Thin Provisioning feature will implement the
Warning Threasholds.
If 'warnWithOffline', the user will receive event warnings
as they hit the Warning Thresh… | column | Enumeration | .1.3.6.1.4.1.12740.5.1.7.1.1.32 |
| eqliscsiVolumeFlags This field defines the common place holder for Volume operational flags. | column | Bits | .1.3.6.1.4.1.12740.5.1.7.1.1.33 |
| eqliscsiVolumeTemplate This field specifies if the Volume is a Template Volume. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.5.1.7.1.1.34 |
| eqliscsiVolumeThinClone This field specifies if the Volume is a Thin Clone Volume. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.12740.5.1.7.1.1.35 |
| eqliscsiVolumeThinCloneParentMemberId If the entry has indicated that this is a Thin Clone Volume, then this
field will specify the Parent Index's MemberId. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.1.1.36 |
| eqliscsiVolumeThinCloneParentVolIndex If the entry has indicated that this is a Thin Clone Volume, then this
field will specify the Parent Index's VolumeIndex. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.1.1.37 |
| eqliscsiVolumeThinCloneParentPsvId If non-empty, then this volume is a Thin Clone of a Template Volume. This field
is the PsvId of the Template Volume. | column | OctetString | .1.3.6.1.4.1.12740.5.1.7.1.1.38 |
| eqliscsiVolumeAdminAccountKey This field specifies the unique key for identifying a volume administrator
that owns this volume. If no account has this value as its
eqlStorageGroupAdminAccountKey, then the vo… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.12740.5.1.7.1.1.39 |
| eqliscsiVolumeName EQL-SECONDARY-KEY
This field specifies a user friendly name for a volume.
The name must be unique within a group.
The name must not contain spaces or special characters.
The name … | column | OctetString | .1.3.6.1.4.1.12740.5.1.7.1.1.4 |
| eqliscsiVolumeBorrow This field specifies if this Volume is allowed to borrow.
All the volumes including replica sets created in V6.0.0
have this MIB variable set to 'enabled' although V6.0.0
doesn't … | column | StatusAutoDefault | .1.3.6.1.4.1.12740.5.1.7.1.1.41 |
| eqliscsiVolumeSectorSize This field specifies, in bytes, the sector size of this volume. | column | Enumeration | .1.3.6.1.4.1.12740.5.1.7.1.1.42 |
| eqliscsiVolumeSite This field specifies the site where the volume resides.
Sites are defined on a per array basis.
Sites are used to define where primary and secondary copies of volume mirror reside… | column | OctetString | .1.3.6.1.4.1.12740.5.1.7.1.1.5 |
| eqliscsiVolumeDescription This field specifies a descriptive string that provides details about the volume.
The description can be up to 128 characters. There is no default value. | column | OctetString | .1.3.6.1.4.1.12740.5.1.7.1.1.6 |
| eqliscsiVolumeAccessType This field specifies access rights for the volume.
The volume can be either read-write or read-only. The default is read-write. | column | Enumeration | .1.3.6.1.4.1.12740.5.1.7.1.1.7 |
| eqliscsiVolumeSize This field specifies the volume size in MB. There is no default.
Note: Volume size is round to a multiple of 15MB. For thin provisioned volumes
this value represents the advertize… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.12740.5.1.7.1.1.8 |
| eqliscsiVolumeAdminStatus This field specifies if the volume is set to online or offline by
the administrator. If a volume is offline, it cannot be accessed
by iscsi initiators.
When lost bl… | column | Enumeration | .1.3.6.1.4.1.12740.5.1.7.1.1.9 |