EQLGROUP-MIB Table View

EqualLogic-Persistent Storage Group Table

eqlStorageGroupEntry row .1.3.6.1.4.1.12740.1.1.1.1

An entry (row) containing storage group information.

Indexes

No indexes recorded

Column	Syntax	OID
eqlGroupId This index uniquely identifies the group. This index should always be 1.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.1.1.1
eqlGroupIsSingleSubnet This field is used to indicate whether or not all the arrays within a group are located in the same subset. The default is single-subnet.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.1.1.2
eqlGroupDefaultGatewayIpAddressdeprecated This field is deprecated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.1.1.3
eqlGroupDefaultMask This field is deprecated.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.12740.1.1.1.1.4
eqlGroupDefaultRoutingProtocol This field is used to indicate the routing protocol use when a group spans multiple subnets. The support protocols are RIP and OFPS. The default value is none.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.1.1.5
eqlGroupIsStorageOptimization This field is used to indicate whether the Storage Pool is optimized for capacity (RAID 5/50) or performance (RAID 10). The default is capacity.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.1.1.6
eqlGroupDiskAddWaitTime This field is used to indicated how long to wait in minutes before including newly inserted drives into the RAID set. The delay allows for multiple drives to be inserted before the expansion begins. The default is 2 min…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.1.1.7
eqlGroupDefaultLanguagedeprecated This field is deprecated.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.1.1.8
eqlGroupDefaultSnapshotSize This field is used to specify by default what percentage of a volume is reserved for SnapShots. The default is 100%. It can be overriden on a per volume basis. If a volume, testvol, is 100MB, and the GroupDefaultSnapsho…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.1.1.9
eqlGroupDefaultSnapshotWarningLevel This field is used to specify by default when the administrator is warned that the space used for SnapShots close to being exhausted. The default is 20%. It can be overriden on a per volume basis.	Integer32r/w	.1.3.6.1.4.1.12740.1.1.1.1.10
eqlGroupDefaultSnapshotDeletePolicy This field specifies what should happen when the space reserved for SnapShots is exhuasted. The default is delete-oldest SnapShot.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.1.1.11
eqlGroupTimeZone The field specifies the default timezone for the group HST (GMT-10:00) Hawaiian Standard Time: Pacific/Honolulu, AST (GMT-09:00) Alaskan Standard Time: America/Anchorage, PST (GMT-08:00) Pacific Standard…	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.1.1.13
eqlGroupLogLevel This field specifies the loglevel for the group. The log level determines which messages are written to the console. The following levels are supported. The value of this object will be an OR of the values associated…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.1.1.14
eqlGroupDescription This field contains a use supplied description for the group. There is no default.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.1.1.15
eqlGroupIscsiNamePrefix This field specifies the prefix for the iSCSI target names. The default is iqn.2001-04.com.equallogic. This can be overriden on a per volume basis. However the name must conform to the iSCSI Specification.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.1.1.16
eqlGroupDefaultAliasToVolumeName This field specifies whether or not to default the iSCSI alias to the name of the volume. This can be overriden on a per volume basis. The default is to set the iSCSI alias to the volume name.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.17
eqlGroupEmailSrcDomain This field specifies the SNMP domain name used in the FROM email address in generated email. e.g., everything after @ in foo@equallogic.com .	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.1.1.18
eqlGroupName This field specifies the Well Known Name for the group. It must be a name which is resolvable by DNS. There is no default for Group Name.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.1.1.19
eqlGroupIpAddr This field is deprecated and will be unsupported in the next release.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.12740.1.1.1.1.20
eqlGroupEnableWebAccessSSL This field specifies whether or not to allow web access to the group using https. The default is TRUE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.21
eqlGroupEnableWebAccessUnsecure This field specifies whether or not to allow web access to the group using http. The default is TRUE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.22
eqlGroupEnableCliAccessSSH This field specifies whether or not to allow ssh access to the group. The default is TRUE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.23
eqlGroupEnableCliAccessUnsecure This field specifies whether or not to allow telnet access to the group. The default is FALSE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.24
eqlGroupEnableEmailNotifications This field is used to specify whether to notify administrators on alarms via email. The default is FALSE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.25
eqlGroupEnableSNMPTraps This field is used to specify whether to notify administrators on alarms via SNMP TRAPS. The default is FALSE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.26
eqlGroupEnableSyslog This field is used to specify whether to notify administrators on alarms via syslog. The default is FALSE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.27
eqlGroupEmailPriorityMask This field is used to configure the type of events to be sent in email notifications. The following type of events are supported. info(4), warning(8), error(16), fatal(32) More than one type …	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.1.1.28
eqlGroupSNMPPriorityMaskdeprecated This field is currently not being used.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.1.1.29
eqlGroupSysLogPriorityMask This field is used to configure the type of events to be sent in syslog notifications. The following type of events are supported. info(4), warning(8), error(16), fatal(32) More than one type…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.1.1.30
eqlGroupDefaultSite This field specifies the site where the volume resides. Sites are defined on a per array basis. Sites are used to define where primary and secondary copies of volume mirror reside. The default is the default site. This …	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.1.1.31
eqlGroupPasswd1 An octet string containing the password to authenticate members joining the group. If written, it changes the password for the account. If read, it returns a zero-length string.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.1.1.32
eqlGroupPasswd2 This field is deprecated.	OctetString	.1.3.6.1.4.1.12740.1.1.1.1.33
eqlGroupRowStatus Rowstatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.1.1.34
eqlGroupObjectReuseScrubdeprecated If enabled, an object is zeroed out before reuse so that the new entity using the object will not be aware of the old contents of the object. This field is deprecated and is unsupported from 7.0.	Enumeration	.1.3.6.1.4.1.12740.1.1.1.1.35
eqlGroupEnableSSHdeprecated This field is deprecated and will be unsupported in the next release.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.36
eqlGroupEnableTelnetdeprecated This field is deprecated and will be unsupported in the next release.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.37
eqlGroupEnableFTP This field specifies whether or not to allow ftp access to the group. The default is TRUE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.38
eqlGroupEmailSrcUserName This field specifies user portion of the FROM email address used in generated email. e.g., everything before @ in foo@equallogic.com .	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.1.1.39
eqlGroupSyslogFacility This field specifies the facility code which you would like applied to all eqllog messages that are targeted at syslog.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.1.1.40
eqlGroupEnableCLB This field specifies whether or not to turn on Connection Load balancer. The default is TRUE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.41
eqlGroupEnableVolBal This field specifies whether or not to turn on volume balancing. The default is TRUE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.42
eqlGroupDiscoveryFilter If set to true, the list of volumes returned during discovery is filtered based on chap configuration in volume ACLs. The default is FALSE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.43
eqlGroupEmailSupportContact This field specifies the customer email address for support to contact in the event of a system failure. Configuring this field will enable each member to send an e-mail to this address and customer support in the even…	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.1.1.44
eqlGroupReplicationWindowSize This field specifies the receiving window size of the tcp connection established to secondary site during replication data transfer. Minimum value is 72KB.Maximum value is 2048KB.	KBSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.1.1.45
eqlGroupConfigurationFlags This field defines the common place holder for group wide configuration flag. The flags must be of type enable(1) or disable(0). and the default value will always be disable(0).	Bitsr/w	.1.3.6.1.4.1.12740.1.1.1.1.46
eqlGroupISCSIPortalGrpTag A flag used internally by the iSCSI subsystem to determine the upgrade history of this storage group and infer the default iSCSI Target Portal Group ID. This value is changed internally by the group management daemon as…	Enumeration	.1.3.6.1.4.1.12740.1.1.1.1.47
eqlGroupMaxConcurrentReplicas This field specifies the maximum number of replications that are transferring data at one time. The minimum value is 1, the maximum value is 16, and the default value is 16.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.1.1.48
eqlGroupDefaultThinWarn The default eqliscsiVolumeThinWarnPercentage value used when creating thin provisoned volumes.	Unsigned32r/w	.1.3.6.1.4.1.12740.1.1.1.1.49
eqlGroupDefaultThinMaxGrow The default eqliscsiVolumeThinMaxGrowPercentage value used when creating thin provisoned volumes.	Unsigned32r/w	.1.3.6.1.4.1.12740.1.1.1.1.50
eqlGroupDefaultMgmtGatewayIpAddressType This field is used to indicate the default gateway for the management network. This field contains the address of the local router used to forward network traffic beyond the local management subnet. Gateways are used to…	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.12740.1.1.1.1.51
eqlGroupDefaultMgmtGatewayIpAddress This field is used to indicate the default gateway for the management network. This field contains the address of the local router used to forward network traffic beyond the local management subnet. Gateways are used to…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.12740.1.1.1.1.52
eqlGroupInet6AddrType This field specifies the type of the IPv6 Well Known Address for the group. This is the IPv6 address iSCSI Initiators will used to connect to the group.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.12740.1.1.1.1.53
eqlGroupInet6Addr This field specifies the IPv6 Well Known Address for the group. This is the IPv6 address iSCSI Initiators will used to connect to the group. There is no default value for this field.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.12740.1.1.1.1.54
eqlGroupInetAddrType This field specifies the type of the IPv4 Well Known Address for the group. This is the IPv4 address iSCSI Initiators will used to connect to the group.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.12740.1.1.1.1.55
eqlGroupInetAddr This field specifies the IPv4 Well Known Address for the group. This is the IPv4 address iSCSI Initiators will used to connect to the group. There is no default value for this field.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.12740.1.1.1.1.56
eqlGroupSupportSlowSwitch This field is used to indicate the slow switch support for the group.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.1.1.57
eqlGroupProfileIndex This field represents the profile identifier.	Unsigned32	.1.3.6.1.4.1.12740.1.1.1.1.58
eqlGroupEnableSSHProtocolV1 This field specifies whether or not the SSH service should support the V1 Protocol. The default is TRUE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.59
eqlGroupEnableStandbyButton This field specifies if the standby button on the Pirates/Porfidio enclosures will be enabled/disabled. The default is FALSE.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.60
eqlGroupLDAPLoginAuthEnable This field enables LDAP login authentication.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.61
eqlGroupApplianceDiscovery	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.1.1.62
eqlGroupDefaultDcbVlanId Default VLAN ID for DCB control packets on interfaces.	Unsigned32r/w	.1.3.6.1.4.1.12740.1.1.1.1.63
eqlGroupThermalShutdownOverride This field specifies whether thermal shutdownn override is enabled or disabled.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.1.1.64
eqlGroupEnableLegacyCryptos This field specifies whether legacy crypto protocols should be enabled or not. This affects what protocols should be supported by applications such as SSH server, HTTPS server, LDAP client, SNMPv3 agent, etc.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.1.1.65
eqlGroupMaxReplSegments This field specifies the maximum number of replica segments of 256K size per volume that are transferring data at one time. The minimum value is 1, the maximum value is 60, and the default value is 60.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.1.1.66
eqlGroupEnableVolumeRecovery This field specifies whether or not the recoverable volume feature is enabled. The default value is enabled.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.67
eqlGroupSessionIdleTimeout This is the number of minutes a session may remain idle before being logged out for inactivty. The maximum timeout value is 24 hours or 1440 minutes. The minimum value is 1 minute. The default value is 30 minutes.	minutesInteger32r/w	.1.3.6.1.4.1.12740.1.1.1.1.68
eqlGroupSessionIdleTimeoutEnable Enable/disable the idle session timeout feature. The default is disabled.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.1.1.69
eqlGroupSessionBannerEnable Enable/disable the session banner feature. The default is disabled.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.1.1.70
eqlGroupDefaultVolSnapshotBorrowEnabled This field allows the user a way to change the default behavior of snapshot borrowing on new volume creates across the group.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.71
eqlGroupRecoveryLifeTimeEnable This field enables or disables the lifetime that a deleted volume can remain in the recovery bin. When enabled, a volume will be permanently deleted after the recovery lifetime in the recovery bin.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.1.1.72
eqlGroupRecoveryLifeTime This field defines the amount of time (in seconds) that a deleted volume can remain in the recovery bin before being permanently deleted by the system. The default value (0) is one week.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.1.1.73
eqlGroupTimeProtocol This field specifies the active network time protocol. The value may be ntp(0) or sntp(1) with a default value of ntp(0).	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.1.1.74
eqlGroupRecoveryTrimmerFreq This field defines the frequency (in seconds) that the system will scan for volumes that have been in the recovery bin past their lifetime. The default value is one scan every 24 hours.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.1.1.75
eqlGroupUpdateEnable Enable/disable update available checking.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.1.1.76
eqlGroupUpdateLast The time of last update performed represented as the number of seconds since the epoch.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.1.1.77
eqlGroupDefaultSectorSize This field specifies, in bytes, the default volume sector size for this group.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.1.1.78
eqlGroupCompressionScanFreq This index is the last assigned index value associated with VVol Volumes.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.1.1.80
eqlGroupRunCompressionScan Enable/Disable the snapshot compression scanner.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.1.1.81
eqlGroupMonitorReminderTimestamp UTC timestamp when to display the monitoring connection reminder. 0 to display immediately. 0x7fffffff to never display.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.1.1.82

EqualLogic-Dynamic Group Status Table

eqlStorageGroupStatusEntry row .1.3.6.1.4.1.12740.1.1.2.1

An entry (row) containing Group status information.

Indexes

No indexes recorded

Column	Syntax	OID
eqlStorageGroupStatusPoolSpace This field specifies the total size of the Storage Pool in MBs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.1
eqlStorageGroupStatusPoolSpaceUsed This field specifies the total space reserved for volume data within the Storage Pool in MBs. Note that this value does not include space reserved for snapshots or replication.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.2
eqlStorageGroupStatusTotalMembersOnLine This field specifies the number of group members which are online.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.3
eqlStorageGroupStatusPoolSpaceReserved This field specifies the total space reserved for SnapShot data within the Storage Pool in MBs.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.4
eqlStorageGroupStatusReservedSpaceInUse This field specifies the total reserved space in use by snapshots in the storage pool . This will be equal to sum of eqlMemberSnapStorage for all members.	MBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.5
eqlStorageGroupStatusDateAndTime This field specifies the current time in group represented as number of seconds since epoch.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.6
eqlStorageGroupStatusSnapshotsInUse This field specifies the total number of snapshots within the group that currently have active iSCSI connections.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.7
eqlStorageGroupStatusVolumesInUse This field specifies the total number of snapshotsvolumes within the group that currently have active iSCSI connections.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.8
eqlStorageGroupStatusSnapshotsOnline This field specifies the total number of snapshots available for iSCSI connections.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.9
eqlStorageGroupStatusVolumesOnline This field specifies the total number of volumes available for iSCSI connections.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.10
eqlStorageGroupStatusSnapshotCount This field specifies the total number of snapshots in this group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.11
eqlStorageGroupStatusVolumeCount This field specifies the total number of volumes in this group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.12
eqlStorageGroupStatusMemberCount This field specifies the total number of members in this group irrelevant of current member state.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.13
eqlStorageGroupStatusMembersInUse This field specifies the total number of online+offline members in this group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.14
eqlStorageGroupStatusFreeSpace This field specifies the total free space of the Storage Pool in Mega Bytes.	MBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.15
eqlStorageGroupStatusPoolSpaceDelegated This field specifies the amount of free space of the Storage Pool which has been partitioned for use by external services such as remote replication. This space is reserved and can be controlled by the users of these…	MBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.16
eqlStorageGroupStatusDelegatedUsedSpace This field specifies the amount of space used by external services such as remote replication. This sum represents total space used by all of the entries in the replicant site table	MBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.17
eqlStorageGroupStatusReplReserveSpace This sum represents total space reserved for all volumes for replication purposes.	MBSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.18
eqlStorageGroupStatusReplReserveInUse This sum represents total space in use for all volumes for replication purposes. This value will be equal to sum of eqlMemberReplStorage for all members.	MBSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.19
eqlStorageGroupStatusVolumeSpaceSubscribed This field specifies the total subscribed space for all volumes in the group. For a thin provisioned volume, subscribed space is the advertised space. For a regular volume, subscribed space is the volume size. The valu…	MBSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.20
eqlStorageGroupStatusVolumeSpaceAllocated The value of this object represents the sum of actual materialized pages for all volumes in the group.	MBSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.21
eqlStorageGroupStatusFailbackSpace This field represents the amount of space consumed by fail-back replicasets in this storage group.	MBSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.22
eqlStorageGroupStatusThinProvFreeSpace This field represents the amount of space available for Thin Provisioned Volumes in this storage group.	MBSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.23
eqlStorageGroupStatusConnectionCount This field gives the number of iSCSI connections that are currently connected to volumes in this group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.24
eqlStorageGroupStatusSnapReserveSpaceFree This represents the total space still available for Snapshot usage.	MBSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.25
eqlStorageGroupStatusReplReserveSpaceFree This represents the total space still available for Replica Snapshot usage.	MBSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.26
eqlStorageGroupStatusGroupId This represents an ID uniquely representing a group.	OctetString	.1.3.6.1.4.1.12740.1.1.2.1.27
eqlStorageGroupStatusVirtualVolumeCount This field specifies the total number of volumes in this group, adjusted to remove volumes not typically visible such as synchronous replication standbys.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.28
eqlStorageGroupStatusVirtualVolumesOnline This field specifies the total number of volumes available for iSCSI connections, excluding synchronous replication standbys.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.29
eqlStorageGroupStatusVirtualVolumesInUse This field specifies the total number of volumes within the group that currently have active iSCSI connections excluding synchronous replication standbys.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.30
eqlStorageGroupStatusVirtualVolumeSpaceSubscribed This field specifies the total subscribed space for all volumes in the group. For a thin provisioned volume, subscribed space is the advertised space. For a regular volume, subscribed space is the volume size. The valu…	MBSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.31
eqlStorageGroupStatsTotalSpaceBorrowing This field specifies the total amount of borrowing against other volume's free snapshot reserve and pool free space. This includes snapshots and recoverable volumes.	MBSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.32
eqlStorageGroupStatusStorageContainerCount This field specifies the total number of storage containers within the group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.34
eqlStorageGroupStatusStorageContainerVolumeCount This field specifies the total number of volume resources that are being consumed within all storage containers.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.35
eqlStorageGroupStatusStorageContainerSnapCount This field specifies the total number of snapshot resources that are being consumed within all storage containers.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.36
eqlStorageGroupStatusStorageContainerVolumesOnline This field specifies the total number of online volume resources that are being consumed within all storage containers.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.37
eqlStorageGroupStatusStorageContainerSpaceReserved This field specifies the total amount of storage that is being consumed within all storage containers.	MBSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.12740.1.1.2.1.38
eqlStorageGroupStatusCompressedSpaceUsed This field specifies the total amount of space in MB that is currently utilized for compressed pages. This is a dynamic value and cannot be set.	MBSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.12740.1.1.2.1.39
eqlStorageGroupStatusVirtualSpaceSize This field specifies the total amount of space in MB that would be utilized by compressed pages if there was no compression.	MBSNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.12740.1.1.2.1.40
eqlStorageGroupStatusReplicationSnapCount This field specifies the total number of snapshot resources that are being consumed for replication. This includes inbound replicas, and temporary snapshots used for in-progress outbound replication.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.2.1.41
eqlStorageGroupStatusStorageContainerVolumesBound This field specifies the total number of bound volume across all storage containers.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.2.1.42

EqualLogic-Persistent Storage Group Site Table

eqlStorageGroupSiteEntry row .1.3.6.1.4.1.12740.1.1.3.1

An entry (row) containing storage group site information.

Indexes

No indexes recorded

Column	Syntax	OID
eqlGroupSiteIndex This field specifies the unique index used to identify a site.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.3.1.1
eqlGroupSiteName This field specifies the name of the site default site for the group.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.3.1.2
eqlGroupSiteDescription This field contains a description of the site. For example the phsyical address of the site. There is no default.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.3.1.3
eqlGroupSiteContactEmail This field specifies the email address of the Administrators responsible for this site.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.3.1.4
eqlGroupSiteContactPhone This field specifies the phone number of the Administrator responsible for this site.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.3.1.5
eqlGroupSiteContactMobile This field specifies the cell phone number of the Administrator responsible for this site.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.3.1.6
eqlGroupSiteRowStatus Row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.3.1.7

EqualLogic-Persistent Storage Group DNS Server Table
TimeoutAll:600

eqlStorageGroupDnsServerEntry row .1.3.6.1.4.1.12740.1.1.4.1

An entry (row) containing group dns server information.

Indexes

No indexes recorded

Column	Syntax	OID
eqlGroupDnsServerIndex This field specifies an index that uniquely identifies the DNS server entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.4.1.1
eqlGroupDnsServerIpAddress This field is deprecated and will be unsupported in the next release.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.12740.1.1.4.1.2
eqlGroupDnsServerRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.4.1.3
eqlGroupDnsServerInetAddressType This field contains the IP address type for the DNS server.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.12740.1.1.4.1.4
eqlGroupDnsServerInetAddress This field contains the IP address, in network byte order, for the DNS server.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.12740.1.1.4.1.5
eqlGroupDnsServerConfigState This field denotes the transaction state of the eqlStorageGroupDnsServerTable.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.4.1.6

EqualLogic-Persistent Storage Group NTP Server Table

eqlStorageGroupNtpServerEntry row .1.3.6.1.4.1.12740.1.1.5.1

An entry (row) containing group ntp server information.

Indexes

No indexes recorded

Column	Syntax	OID
eqlGroupNtpServerIndex This field specifies an index that uniquely identifies the NTP server entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.5.1.1
eqlGroupNtpServerIpAddress This field is deprecated and will be unsupported in the next release.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.12740.1.1.5.1.2
eqlGroupNtpServerRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.5.1.3
eqlGroupNtpServerPort The listening port number of the ntp server.Default value implies well known ntp port number ( 123 ) assigned by the IANA.	Integer32r/w	.1.3.6.1.4.1.12740.1.1.5.1.4
eqlGroupNtpServerInetAddressType This field contains the IP address type for the NTP server.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.12740.1.1.5.1.5
eqlGroupNtpServerInetAddress This field contains the IP address, in network byte order, for the NTP server.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.12740.1.1.5.1.6

EqualLogic-Persistent Storage Group Chap Server Table

eqlStorageGroupChapServerEntry row .1.3.6.1.4.1.12740.1.1.6.1

An entry (row) containing storage group chap server information.

Indexes

No indexes recorded

Column	Syntax	OID
eqlGroupChapServerIndex This field specifies an index that uniquely identifies the CHAP server entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.6.1.1
eqlGroupChapServerIpAddress This field is deprecated and will be unsupported in the next release.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.12740.1.1.6.1.2
eqlGroupChapServerRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.6.1.3
eqlGroupChapServerPort The listening port number of chap server at the specified ipaddress. The default value of zero implies that the authentication request will be forwarded to the default radius port(port number 1812). The value of this ob…	Integer32r/w	.1.3.6.1.4.1.12740.1.1.6.1.4
eqlGroupChapServerRADIUSSecret This field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.6.1.5
eqlGroupChapServerInetAddressType This field contains the IP address type for the CHAP server.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.12740.1.1.6.1.6
eqlGroupChapServerInetAddress This field contains the IP address, in network byte order, for the CHAP server.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.12740.1.1.6.1.7

EqualLogic-Persistent Storage Group SMTP Server Table

eqlStorageGroupSMTPServerEntry row .1.3.6.1.4.1.12740.1.1.7.1

An entry (row) containing group smtp sever information.

Indexes

No indexes recorded

Column	Syntax	OID
eqlGroupSMTPServerIndex This field specifies an index that uniquely identifies the SMTP server entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.7.1.1
eqlGroupSMTPServerIpAddress This field is deprecated and will be unsupported in the next release.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.12740.1.1.7.1.2
eqlGroupSMTPServerRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.7.1.3
eqlGroupSMTPServerPort The listening port number of the SMTP server. The default value of zero implies that the server is listening on wellknown port number ( 25 ) for SMTP asssigned by the IANA.	Integer32r/w	.1.3.6.1.4.1.12740.1.1.7.1.4
eqlGroupSMTPServerInetAddressType This field contains the IP address type for the SMTP server.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.12740.1.1.7.1.5
eqlGroupSMTPServerInetAddress This field contains the IP address, in network byte order, for the SMTP server.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.12740.1.1.7.1.6

EqualLogic-Persistent Storage Group SysLog Server Table

eqlStorageGroupSysLogServerEntry row .1.3.6.1.4.1.12740.1.1.8.1

An entry (row) containing group syslog server info.

Indexes

No indexes recorded

Column	Syntax	OID
eqlGroupSysLogServerIndex This field specifies an index that uniquely identifies the syslog server entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.8.1.1
eqlGroupSysLogServerIpAddress This field is deprecated and will be unsupported in the next release.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.12740.1.1.8.1.2
eqlGroupSysLogServerRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.8.1.3
eqlGroupSysLogServerInetAddressType This field contains the IP address type for the syslog server.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.12740.1.1.8.1.4
eqlGroupSysLogServerInetAddress This field contains the IP address, in network byte order, for the syslog server.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.12740.1.1.8.1.5

EqualLogic-Persistent Storage Group Email Alert Table

eqlStorageGroupAlertEmailEntry row .1.3.6.1.4.1.12740.1.1.9.1

An entry (row) containing group alert email info.

Indexes

No indexes recorded

Column	Syntax	OID
eqlGroupAlertEmailIndex This field specifies an index that uniquely identifies the email user to alert.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.9.1.1
eqlGroupAlertEmailAddress This field specifies the email address of the Adminstrator targeted to recieve the email the email alerts.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.9.1.2
eqlGroupAlertEmailRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.9.1.3

EqualLogic-Persistent Storage Group Administration account table.
This table contains a collection of administration account records.
It is indexed by group id and administration account record index.

eqlStorageGroupAdminAccountEntry row .1.3.6.1.4.1.12740.1.1.10.1

An entry (row) containing administration account settings.

Indexes

No indexes recorded

Column	Syntax	OID
eqlStorageGroupAdminAccountIndex The index value that uniquely identifies the administration account record.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.10.1.1
eqlStorageGroupAdminAccountRowStatus This value is used to manage the conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.10.1.2
eqlStorageGroupAdminAccountName EQL-SECONDARY-KEY The name of the administration account. This name must be used for user authentication.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.10.1.3
eqlStorageGroupAdminAccountPassword An octet string containing the (crypt cipher) password for this account. If written, it changes the password for the account. If read, it returns a zero-length string.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.10.1.4
eqlStorageGroupAdminAccountDescription This field contains a description of the administration account.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.10.1.5
eqlStorageGroupAdminAccountType This field specifies the type of account. The read-write account type allows the user to modify any group settings. The read-only account allows only read-only access to group configuration data. The default is read-w…	AdminAccountTyper/w Type Values: 1 read-write 2 read-only	.1.3.6.1.4.1.12740.1.1.10.1.6
eqlStorageGroupAdminAccountContact This field contains the full name of the owner of this administration account.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.10.1.7
eqlStorageGroupAdminAccountEmail This field specifies the email address of the owner of this administration account.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.10.1.8
eqlStorageGroupAdminAccountPhone This field specifies the phone number of the owner of this administration account.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.10.1.9
eqlStorageGroupAdminAccountMobile This field specifies the cell phone number of the owner of this administration account.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.10.1.10
eqlStorageGroupAdminAccountStatus This field represents the administration status of the account. Disabling the account will prevent the user from logging into CLI and GUI. Currently logged-in sessions will not be affected.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.10.1.11
eqlStorageGroupAdminAccountCliFlags This field specifies the set of configuration flags used by the CLI. These flags allow the administrator to save CLI configuration settings between the CLI sessions. The meaning of individual bits is not defined yet. TBD	Integer32r/w	.1.3.6.1.4.1.12740.1.1.10.1.12
eqlStorageGroupAdminAccountGuiFlags This field specifies the set of configuration flags used by the GUI. These flags allow the administrator to save GUI configuration settings between the GUI sessions. The meaning of individual bits is not defined yet. TBD	Integer32r/w	.1.3.6.1.4.1.12740.1.1.10.1.13
eqlStorageGroupAdminAccountPollInterval The value of this field specifies how often the group configuration data must be repolled by the GUI. This value is expressed in seconds. The minimum is 5 seconds; the maximum is 1 hour. The default is 30 seconds.	Integer32r/w	.1.3.6.1.4.1.12740.1.1.10.1.14
eqlStorageGroupAdminAccountAuthType This field represents the type of authentication for the administrator. Note that RADIUS/LDAP type users will only appear in the table after a successful login.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.10.1.15
eqlStorageGroupAdminAccountRecentLogin This field represents a timestamp of the most recent time this admin account has logged in. Currently only applies to radius auth type users.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.10.1.16
eqlStorageGroupAdminAccountClass This field contains the contents of the class attribute received in the RADIUS Access-Request and must be reflected in the RADIUS Accounting-Request if accounting is enabled.	OctetString	.1.3.6.1.4.1.12740.1.1.10.1.17
eqlStorageGroupAdminAccountPrivilege This field specifies the privilege level of the account. The default is global-admin. global-admin grants full access to the administrator. pool-admin designates the administrator to have access only to one or more po…	AdminAccountPrivilegeTyper/w Type Values: 0 global-admin 1 pool-admin 2 pool-admin-group-read 3 volume-admin	.1.3.6.1.4.1.12740.1.1.10.1.18
eqlStorageGroupAdminAccountSnmpKey This field contain part of the SNMP key for this account.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.10.1.19
eqlStorageGroupAdminAccountSnmpKey2 This field contain part of the SNMP second key for this account.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.10.1.20
eqlStorageGroupAdminAccountCHAPPassword An octet string containing the (cleartext) password for this account. If written, it changes the password for the account. If read, it returns a zero-length string.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.10.1.21
eqlStorageGroupAdminAccountKey A value to uniquely identify this account. The MIB attribute eqliscsiVolumeAdminAccountKey uses this value to associate a volume with an account. No two accounts can have the same value.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.10.1.22
eqlStorageGroupAdminAccountAdGroupName The name of the Active Directory group, valid only when auth type is LDAP. Same as cn attribute of the AD group.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.10.1.23
eqlStorageGroupAdminAccountSNMPPrivProt An enum field used by the Agent to determine which privacy protocol is used to encrypt external SNMP messages for this user.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.10.1.24

EqualLogic-Persistent Storage Group iSNS Server Table

eqlStorageGroupiSNSServerEntry row .1.3.6.1.4.1.12740.1.1.11.1

An entry (row) containing group iSNS server information.

Indexes

No indexes recorded

Column	Syntax	OID
eqlGroupiSNSServerIndex This field specifies an index that uniquely identifies the iSNS server entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.11.1.1
eqlGroupiSNSServerRowStatus Used to manage conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.11.1.2
eqlGroupiSNSServerIpAddress This field is deprecated and will be unsupported in the next release.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.12740.1.1.11.1.3
eqlGroupiSNSServerPort Indicates the port the iSNS server is accepting iSNSP messages on, generally the iSNS well known port.The well known port for iSNSP is 3205. The default value implies to use well known port.	Integer32r/w	.1.3.6.1.4.1.12740.1.1.11.1.4
eqlGroupiSNSServerInetAddressType This field contains the IP address type for the iSNS server.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.12740.1.1.11.1.5
eqlGroupiSNSServerInetAddress This field contains the IP address, in network byte order, for the iSNS server.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.12740.1.1.11.1.6

EqualLogic-Dynamic Group Compatibility Table

eqlGroupCompatibilityEntry row .1.3.6.1.4.1.12740.1.1.12.1

An entry (row) containing group compatibility information.

Indexes

No indexes recorded

Column	Syntax	OID
eqlGroupCurrentCompLevel This field represents the current compatibility level of the group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.12.1.1

EqualLogic-Dynamic Group Collection Table. This table maintains overall 
number of volume collections and snap collection in a group.

eqlStorageGroupCollectionEntry row .1.3.6.1.4.1.12740.1.1.13.1

An entry (row) containing volume/snap collections information in a group.

Indexes

No indexes recorded

Column	Syntax	OID
eqlGrpNoofVolCollections This field specifies the total number of volume collections in the group ie number of rows in eqliscsiVolCollectionTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.13.1.1
eqlGrpNoofSnapCollections This field specifies the total number of snapshot collections in the group ie number of rows in eqliscsiSnapCollectionTable.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.13.1.2
eqlGrpNoofOrphanSnapCollections This field specifies the total number of snapshot collections in the group that dont have a corresponding volume set ie number of rows in eqliscsiSnapCollectionTable with eqliscsiSnapCollectionVolIndex set to zero.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.13.1.3

EqualLogic-Persistent Group RADIUS Configuration Table. This table maintains
the configuration for the RADIUS implementation.

eqlRADIUSEntry row .1.3.6.1.4.1.12740.1.1.14.1

An entry (row) containing RADIUS information in a group.

Indexes

No indexes recorded

Column	Syntax	OID
eqlRADIUSSecret This field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.14.1.1
eqlRADIUSLoginAuthEnable This field enables RADIUS login authentication.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.14.1.2
eqlRADIUSAuthRecvTimeout This field configures the RADIUS authentication message receive timeout in seconds.	Unsigned32r/w	.1.3.6.1.4.1.12740.1.1.14.1.3
eqlRADIUSAuthMaxRetries This field configures the number of RADIUS authentication retries.	Unsigned32r/w	.1.3.6.1.4.1.12740.1.1.14.1.4
eqlRADIUSLoginAcctEnable This field enables RADIUS accounting for login administrators.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.14.1.5
eqlRADIUSAcctRecvTimeout This field configures the RADIUS accounting message receive timeout in seconds.	Unsigned32r/w	.1.3.6.1.4.1.12740.1.1.14.1.6
eqlRADIUSAcctMaxRetries This field configures the number of RADIUS accounting retries.	Unsigned32r/w	.1.3.6.1.4.1.12740.1.1.14.1.7
eqlRADIUSiscsiAuthEnable This field enables RADIUS authentication for ISCSI initiators.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.14.1.8
eqlLocaliscsiAuthEnable This field enables Local authentication for ISCSI initiators.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.14.1.9
eqlRADIUSRequireAdminAttrEnable This field enables requiring the EQL-Admin RADIUS return attribute.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.14.1.10

EqualLogic-Persistent Group RADIUS Accounting server table.

eqlRADIUSAcctServerEntry row .1.3.6.1.4.1.12740.1.1.15.1

An entry (row) containing the configuration for a RADIUS accounting server.

Indexes

No indexes recorded

Column	Syntax	OID
eqlRADIUSAcctServerIndex This field specifies an index that uniquely identifies the RADIUS Accounting server entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.15.1.1
eqlRADIUSAcctServerIpAddress This field is deprecated and will be unsupported in the next release.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.12740.1.1.15.1.2
eqlRADIUSAcctServerPort The listening port number of the RADIUS Accounting server at the specified ipaddress. The default value of zero implies that the accounting request will be forwarded to the default RADIUS Accounting port(port number 181…	Integer32r/w	.1.3.6.1.4.1.12740.1.1.15.1.3
eqlRADIUSAcctServerRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.15.1.4
eqlRADIUSAcctServerSecret This field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.15.1.5
eqlRADIUSAcctServerInetAddressType This field contains the IP address type for the RADIUS Accounting server.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.12740.1.1.15.1.6
eqlRADIUSAcctServerInetAddress This field contains the IP address, in network byte order, for the RADIUS Accounting server.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.12740.1.1.15.1.7

EqualLogic-Dynamic user session table.

eqlUserSessionEntry row .1.3.6.1.4.1.12740.1.1.16.1

An entry (row) containing an active user administrative session.

Indexes

No indexes recorded

Column	Syntax	OID
eqlUserSessionIndex This field specifies an index that uniquely identifies the user session entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.16.1.1
eqlUserSessionAdminAccountIndex This field specifies an index that uniquely identifies a storage group admin account entry.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.16.1.2
eqlUserSessionStart The timestamp from the start of the administrative session.	SNMPv2-SMICounter32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.16.1.3
eqlUserSessionProtocol The incoming protocol through which the administrator is connecting to the array.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.16.1.4
eqlUserSessionRemoteAddress This field is deprecated and will be unsupported in the next release.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.12740.1.1.16.1.5
eqlUserSessionLocalAddress This field is deprecated and will be unsupported in the next release.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.12740.1.1.16.1.6
eqlUserSessionRemoteInetAddressType The remote IP address type, if applicable, from which the administrator is connecting.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.12740.1.1.16.1.7
eqlUserSessionRemoteInetAddress The remote IP address, if applicable, from which the administrator is connecting.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.12740.1.1.16.1.8
eqlUserSessionLocalInetAddressType The local interface IP address type, if applicable, at which the administrator is connecting.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.12740.1.1.16.1.9
eqlUserSessionLocalInetAddress The local interface IP address, if applicable, at which the administrator is connecting.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.12740.1.1.16.1.10

EqualLogic record version table.

eqlRecordVersionEntry row .1.3.6.1.4.1.12740.1.1.17.1

An entry (row) containing min and max record version.

Indexes

No indexes recorded

Column	Syntax	OID
eqlRecordVersionTableType This field identifies a specific MIB table by tableType_t (see tableTypes.h).	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.17.1.1
eqlRecordVersionMin This field specifies the lowest REC_HDR::major value found in any record of this table.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.17.1.2
eqlRecordVersionMax This field specifies the current REC_HDR::major value for records of this table.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.17.1.3

EqualLogic-Persistent task table. 
A row in this table represents a task currently executing in the group.

eqlGroupTaskEntry row .1.3.6.1.4.1.12740.1.1.18.1

A row in the table represents a task. Any given task will have multiple sub tasks. Each sub task involves executing a management operation. The system will execute each sub task one after another until the task is comp…

Indexes

No indexes recorded

Column	Syntax	OID
eqlGroupTaskIndex This field specifies an index that uniquely identifies a task.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.18.1.1
eqlGroupTaskRowStatus This field is used to manage the conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.18.1.2
eqlGroupTaskType This field represents the type of the task.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.18.1.3
eqlGroupTaskContext Context associated with the task. For ex: a volume or replicaset.	SNMPv2-TCRowPointerr/w Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.12740.1.1.18.1.4
eqlGroupTaskNumSubTasks Number of subtasks in this task.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.18.1.5
eqlGroupTaskSubTaskInProgress Subtask that is currently in progress for this task.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.18.1.6
eqlGroupTaskSubtaskStatus Status of currently executing subtask.	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.18.1.7
eqlGroupTaskStatus set to true if user action is required for the task to proceed further.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.18.1.8
eqlGroupTaskUserAction user action on the task.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.18.1.9
eqlGroupTaskStartTime time at which this task started represented as number of seconds since epoch.	secondsSNMPv2-SMICounter32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.18.1.10
eqlGroupTaskReplication If set to true, a manual replica will be created when performing replication.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.18.1.11

EqualLogic-Persistent Group Profile Table

eqlStorageGroupProfileEntry row .1.3.6.1.4.1.12740.1.1.20.1

An entry (row) containing the profile limits and configuration information.

Indexes

No indexes recorded

Column	Syntax	OID
eqlStorageGroupProfileVersion This field specifies the current version of the Profile. The most significant 16 bits are the compat level, the least significant 16 bits are the profile version.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.20.1.1
eqlStorageGroupProfileWeight This field specifies the current weight of the Profile	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.20.1.2
eqlStorageGroupProfileMaxMembers This field specifies the maximum members that can exist in the group with this profile id.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.20.1.3
eqlStorageGroupProfileMaxVolumes This field specifies the maximum number of volumes in group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.20.1.4
eqlStorageGroupProfileMaxSnapsPerGroup This field specifies the maximum number of snaps in group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.20.1.5
eqlStorageGroupProfileMaxSnapsPerVolume This field specifies the maximum number of snaps per volume.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.20.1.6
eqlStorageGroupProfileMaxReplicasPerVolume This field specifies the maximum number of Replicas per volume.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.20.1.7
eqlStorageGroupProfileMaxReplVolumes This field specifies the maximum number of replication volumes in group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.20.1.8
eqlStorageGroupProfileMaxConnections This field specifies the maximum number of connections allowed per pool.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.20.1.9
eqlStorageGroupProfileMaxPartners This field specifies the maximum number of partners in group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.20.1.10
eqlStorageGroupProfileMaxConnWarning This field specifies when will warning be issued for connection limit.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.20.1.11
eqlStorageGroupProfileMaxSyncReplVolumes This field specifies the maximum number of Sync Repl volumes allowed in the group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.20.1.12

EqualLogic-Dynamic table converting a eqlStorageGroupAdminAccountKey to a 
eqlStorageGroupAdminAccountIndex.

eqlStorageGroupAdminAccountKeyEntry row .1.3.6.1.4.1.12740.1.1.21.1

An entry (row) containing the value of the account index.

Indexes

No indexes recorded

Column	Syntax	OID
eqlStorageGroupAdminAccountIndexValue The index to use to access the group admin account associated with the key specified.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.21.1.1

EqualLogic-Persistent Storage Group CHAP account table.
This table contains a collection of CHAP account records,
each containing Equallogic specific CHAP account information.
It is indexed by group id and CHAP account record index.
There should be a row in this table for every row with index 
1.1.X in table ipsAuthCredChapAttributesTable.  Also, chapIndex
is equal to ipsAuthCredIndex.

eqlStorageGroupChapAccountEntry row .1.3.6.1.4.1.12740.1.1.22.1

An entry (row) containing administration account settings.

Indexes

No indexes recorded

Column	Syntax	OID
eqlStorageGroupChapAccountIndex The index value that uniquely identifies the CHAP account record.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.22.1.1
eqlStorageGroupChapAccountRowStatus This value is used to manage the conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.22.1.2
eqlStorageGroupChapAccountAdminAccountKey A value to uniquely identify this administrative account that created this CHAP account. This value matches the eqlStorageGroupAdminAccountKey of the creating account. If no account exists with a matching account key,…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.12740.1.1.22.1.3
eqlStorageGroupChapAccountPublic If true, the name of the associated CHAP account is viewable by all admin accounts. If false, the name of the associated CHAP account is not viewable by volume administrator accounts that did not create the associate…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.22.1.4

EqualLogic-Persistent Group LDAP Accounting server table.

eqlLDAPServerEntry row .1.3.6.1.4.1.12740.1.1.24.1

An entry (row) containing the configuration for a LDAP server.

Indexes

No indexes recorded

Column	Syntax	OID
eqlLDAPServerIndex This field specifies an index that uniquely identifies the LDAP server entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.24.1.1
eqlLDAPServerBaseDN This field contains the LDAP server BASE DN used for ldapsearch queries.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.24.1.2
eqlLDAPServerSecureProtocol This field represent the security protocol between PS Group and the LDAP server. Default value is none meaning that the user credentials will be sent over the network in plain text.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.24.1.3
eqlLDAPServerInetAddressType This field contains the IP address type for the LDAP Accounting server.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.12740.1.1.24.1.4
eqlLDAPServerInetAddress This field contains the IP address, in network byte order, for the LDAP Accounting server.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.12740.1.1.24.1.5
eqlLDAPServerPort The listening port number of the LDAP Accounting server at the specified ipaddress. The default value of zero implies that the accounting request will be forwarded to the default LDAP Accounting port (389).	Integer32r/w	.1.3.6.1.4.1.12740.1.1.24.1.6
eqlLDAPServerAnonymousAccess This field specifies whether an anonymous bind can be done, in which case the bind DN and the bind password are not needed. The default is no anonymous access.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.12740.1.1.24.1.7
eqlLDAPServerBindDN This field contains the LDAP bind DN (username) for this client. It can be set but it returns a zero-length string upon read.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.24.1.8
eqlLDAPServerBindPassword This field contains the LDAP bind password for this client. It can be set but it returns a zero-length string upon read.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.24.1.9
eqlLDAPServerRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.24.1.10

EqualLogic-Persistent Group Active directory group table. Stores 
the access that an AD group or account receives when logging in 
through an entry in this table.

eqlLdapLoginAccessEntry row .1.3.6.1.4.1.12740.1.1.25.1

An entry (row) containing the configuration for the LDAP
object access details.

Indexes

No indexes recorded

Column	Syntax	OID
eqlLdapLoginAccessName The name of the LDAP object access description. For AD groups, it is the same as cn attribute of the AD group. For LDAP accounts, it is the same as the account name. Length allows for terminating null terminating charac…	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.25.1.1
eqlLdapLoginAccessType This field represents the type of LDAP object that this entry grants access to.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.25.1.2
eqlLdapLoginAccessAccountPrivilege This field specifies the privilege level of the account that logs in through this LDAP object access. The default is global-admin. Global-admin grants full access to the administrator. Pool-admin designates the admin…	AdminAccountPrivilegeTyper/w Type Values: 0 global-admin 1 pool-admin 2 pool-admin-group-read 3 volume-admin	.1.3.6.1.4.1.12740.1.1.25.1.3
eqlLdapLoginAccessAccountType This field specifies the type of account. The read-write account type allows the user to modify any group settings. The read-only account allows only read-only access to group configuration data. The default is read-w…	AdminAccountTyper/w Type Values: 1 read-write 2 read-only	.1.3.6.1.4.1.12740.1.1.25.1.4
eqlLdapLoginAccessRowStatus This field indicates the status of this entry.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.25.1.5
eqlLdapLoginAccessAdDomainName The name of the AD Domain associated with this LDAP object. Length allows for terminating null terminating character.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.25.1.6

EqualLogic-Persistent Storage Group DNS Suffix Table
TimeoutAll:600

eqlStorageGroupDnsSuffixEntry row .1.3.6.1.4.1.12740.1.1.26.1

An entry (row) containing group dns suffix information.

Indexes

No indexes recorded

Column	Syntax	OID
eqlGroupDnsSuffixIndex This field specifies an index that uniquely identifies the DNS suffix entry.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.12740.1.1.26.1.1
eqlGroupDnsSuffixRowStatus row status	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.26.1.2
eqlGroupDnsSuffixString This field contains a suffix string.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.26.1.3
eqlGroupDnsSuffixConfigState This field denotes the transaction state of the eqlStorageGroupDnsSuffixTable.	Enumerationr/w	.1.3.6.1.4.1.12740.1.1.26.1.4

EqualLogic-Dynamic Storage Group Snmp Table. Used solely to communicate Group Snmp params to the Appliance.

eqlStorageGroupSnmpEntry row .1.3.6.1.4.1.12740.1.1.27.1

An entry (row) containing snmp information.

Indexes

No indexes recorded

Column	Syntax	OID
eqlStorageGroupSnmpRowStatus Rowstatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.27.1.1
eqlStorageGroupSnmpManagersList Specifies a list of SNMP managers that can receive SNMP traps. Contains Max of 5 comma separated IP addresses.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.27.1.2
eqlStorageGroupSnmpTrapCommunity Specifies the trap read-only community string.	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.27.1.3

EqualLogic-Persistent Storage Group Session Banner Table

eqlGroupSessionBannerEntry row .1.3.6.1.4.1.12740.1.1.28.1

An entry (row) containing session banner information.

Indexes

No indexes recorded

Column	Syntax	OID
eqlGroupSessionBannerRowStatus Rowstatus	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.12740.1.1.28.1.1
eqlGroupSessionBannerText Up to 1000 bytes of UTF-8 string to display at the beginning of any session	OctetStringr/w	.1.3.6.1.4.1.12740.1.1.28.1.2